XMF-MID1032TABLET

60mm 240mm 100mm 100mm Quick Setup Guide TABLET Features FCC NoticeImportant safety instructions AVISO FCCDeclaración de advertenciaLa 1. Charging the battery Note: Charge your tablet fully before using it the first time. 1 Connect the micro USB cable to your tablet. 2 Connect the other end of the micro USB cable to the USB power adapter (wall charger), then plug the adapter into a power outlet. It takes about three hours to fully charge your tablet. Caution: Use only the included power adapter to charge your tablet's battery. An incompatible adapter may damage your tablet. When you turn on your tablet for the first time, you'll be prompted to set up things like Wi-Fi and email. Follow the instructions displayed on your tablet to complete setup. 1) Press and hold (power) until the Power off screen opens. 2) Tap Power Off. Press and hold the (power) button on the side of your tablet. To wall outlet 2. Turning on your tablet Welcome English (united Kingdom) English (united States) Espanol (españa) 3. Setting up your tablet 4. Turning off your tablet: Guía de instalación rápida TABLET Características Importante instrucciones de seguridad 1. Carga de la batería Nota: cargue el paquete de baterías completamente antes de usarlo por primera vez. 1) Conecte el cable micro USB a su tableta. 2) Enchufe el otro extremo del cable micro USB al adaptador de alimentación USB (cargador de pared) y conecte el adaptador en un tomacorriente. Se necesita aproximadamente tres horas para cargar completamente su tableta. Cuidado: use solamente el adaptador de alimentación incluido la batería de su tableta. Un adaptador incompatible puede dañar su tableta. Cuando encienda su tableta por primera vez, se le pedirá configurar funciones como Wi-Fi y el correo elctrónico. Siga las instrucciones que se muestran en su tableta para completar la instalación. 1) Mantenga presionado el botón (encendido) hasta que se abra la pantalla Power off (Desconectar). 2) Toque apagar (Power Off). Mantenga presionado el botón (encendido) en la parte lateral de su tableta. To wall outlet 2. Encendido de su tableta Welcome English (united Kingdom) English (united States) Espanol (españa) 3. Preparación de su tableta 4. Para apagar su tableta: www.digi-land.net Made in China www.digi-land.net Hecho en China 1)Please read this instruction carefully before using your device to ensure safe and correct use. 2)Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. 3) Do not use this unit near water. Do not place over the unit any container with liquid inside. 4)Please do not put your device in high temperature, moisture or dust place. The tablet is not waterproof. 5) Avoid falling or violent collision. Do not violently shake the touch screen, otherwise, it could lead to damage or display abnormal. 6) If system shutdown automatically, it means the battery may used up, battery charging is required. 7)Please charge the tablet regularly if not in use for a long time to avoid the damage caused by the excessive consumption of battery. 8)Do not disassemble or use alcohol, thinner or benzene class to swab product surface. 9)Please do not use the tablet when driving or walking in the street, otherwise it may lead an accident. 10) Please choose the appropriate volume, if had tinnitus, please lower the volume or stop using. 11) When CPU operates in high speed, especially playing 3D games or High-definition video for a long time, the fuselage will have fever. 12)The battery is contained with the device, please do not take out the battery. 1)Por favor, lea atentamente este manual antes de usar su dispositivo con el fin de asegurar el uso seguro y correcto. 2)Siempre deje suficiente espacio para ventilación alrededor del producto. No ponga el producto en la cama, alfombra, librero o gabinete que pueda obstruir la corriente de aire a través de apeturas de ventilación. 3)No utilice esta unidad cerca de agua. No coloque sobre la unidad ningún recipiente con líquido en su interior. 4)Por favor, no ponga el dispositivo en alta temperatura, humedad o el lugar lleno de polvo; la tableta no es resistente al agua. 5)Evitar caída o colisión violenta, no agitar violentamente la pantalla táctil, de lo contrario, podría provocar daños o visualización anormal. 6) Si el sistema se apague de forma automática, será arrancable de nuevo poco después de la parada. 7) Por favor, cargue la tableta con regularidad si no usarla durante mucho tiempo para evitar daños causados por el consumo excesivo de la batería. 8)No desmonte, ni utilice alcohol, disolvente o clase benceno para frotar la superficie del producto. 9)Por favor, no use la tableta cuando se conduce o se camina por la calle, de lo contrario puede provocar un accidente. 10)Por favor, elija el volumen adecuado, si tenía tinnitus, por favor, baje el volumen o deje de usar. 11)Cuando la CPU se funciona bajo alta velocidad, especialmente en los juegos 3D o en modo de reproducción a largo tiempo de alta definición de vídeo, el fuselaje tendrá el fenómeno de fiebre. 12) La batería está contenida con el dispositivo, por favor The following statement applies to all products that have received FCC approval. Applicable products wear the FCC logo, and /or an FCC ID in the format FCC ID: XMF-MID1032 on the product label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation. This mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency en…

Text truncated - open the document above for the full version.

Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Date: Jul 22, 2020 UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: XMF-MID1032 (1) DFS Device: Master Client with Radar detection capability N/A Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210-5210 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5775-5775 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement Yes No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name: Jack Sun Company: Lightcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Phone: 0085221913611 Fax: 0085221913612 E-Mail: [email protected]

Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Agent Authorization Date: Jul 22, 2020 Company: Lightcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Product Description: TABLET FCC ID Number: XMF-MID1032 Tested Model Number: MID1032-MR, DL1036 We authorize Eurofins Product Service GmbH, Storkower Strasse 38c, D-15526 Reichenwalde, Germany, to act on our behalf on all matters concerning the certification of above mentioned equipment. We declare that Eurofins Product Service GmbH is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We, Lightcomm Technology Co., Ltd., the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.), Shenzhen Microwave Certification Services Co., Ltd. (Gilbert Lui, Marketing Manager) and Ka.Ma.S UG (Karin Schmidt, CEO) on our behalf, to apply to the Federal Communications Commission on our equipment. We, the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) to act on our behalf in matters relating to the application for a FCC equipment authorization for mentioned FCC ID Number including the signing of Form 731, necessary forms and documents in connection with this application. Any and all acts carried out by Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) on our behalf shall have the same effect as acts of our own. This authorization expires on 31th December, 2020. Yours Sincerely, Lightcomm Technology Co., Ltd. <Signature of Jack Sun > ----------------------------------------------------------------------------------- Jack Sun UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Phone: 0085221913611 Email: [email protected]

Lightcomm Technology Co., Ltd. Declaration Letter of Model Difference Model Declaration Letter For FCC ID: XMF-MID1032 We, the undersigning company Company Name: Lightcomm Technology Co., Ltd. Address: UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Hereby confirm that the following products: Product description: TABLET Type designation: MID1032-MR, DL1036 Trade name or Brand(s): N/A All these models are identical in the same PCB, layout and electrical circuit, The only difference is model name for commercial purpose. Company: Date: Name: (this must be a person) Signature: (or official company stamp) Lightcomm Technology Co., Ltd. 07/22/2020 Jack Sun

Page: 3 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Page: 4 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT

Page: 1 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Appendix IFCC ID Label Size for the label: 30mm X 30mm FCCID: XMF-MID1032 Model: MID1032-MR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Page: 2 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Appendix II ID Label Location ID LOCATION

Page: 5 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 7 Internal of EUT Photo 8 Internal of EUT 2.4G/5G WIFI BT ANT. Page: 6 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Photo 9 Internal of PCB Photo 10 Appearance of Battery Page: 7 of 9 FCC ID: XMF-MID1032 TB-RF-074-1.0 Photo 11 Internal of PCB Photo 12 Internal of PCB

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com SAR TEST REPORT FCC ID: XMF-MID1032 Product: TABLET Model No.: MID1032-MR Additional Model: DL1036 Trade Mark: N/A Report No.: TCT200722E011 Issued Date: Jul. 28, 2020 Issued for: Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Issued By: Shenzhen Tongce Testing Lab. 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab.. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT200722E011 Page 2 of 65 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TABLE OF CONTENTS 1. Test Certification ................................................................................................................................. 3 2. Facilities and Accreditations ............................................................................................................. 4 2.1. FACILITIES ...................................................................................................................................... 4 2.2. LOCATION ...................................................................................................................................... 4 2.3. ENVIRONMENT CONDITION: ............................................................................................................. 4 3. Test Result Summary ......................................................................................................................... 5 4. EUT Description .................................................................................................................................. 6 5. RF Exposure Limit .............................................................................................................................. 7 6. SAR Measurement System Configuration ....................................................................................... 8 6.1. SAR MEASUREMENT SET-UP .......................................................................................................... 8 6.2. E-FIELD PROBE .............................................................................................................................. 9 6.3. PHANTOM ....................................................................................................................................... 9 6.4. DEVICE HOLDER ........................................................................................................................... 10 6.5. DATA STORAGE AND EVALUATION ................................................................................................ 11 6.6. POSITION OF THE WIRELESS DEVICE IN RELATION TO THE PHANTOM ............................................... 12 6.7. TISSUE DIELECTRIC PARAMETERS ................................................................................................ 15 6.8. TISSUE-EQUIVALENT LIQUID PROPERTIES ..................................................................................... 16 6.9. SYSTEM CHECK ............................................................................................................................ 17 7. Measurement Procedure .................................................................................................................. 18 8. Conducted Output Power ................................................................................................................. 21 9. Exposure Position Consideration ................................................................................................... 23 9.1. EUT ANTENNA LOCATION ............................................................................................................ 23 9.2. TEST POSITION CONSIDERATION ................................................................................................... 23 10. SAR Test Results Summary............................................................................................................. 24 10.1. BODY-WORN 1G SAR DATA ......................................................................................................... 24 10.2. MEASUREMENT UNCERTAINTY (450MHZ-3GHZ) ........................................................................... 25 10.3. TEST EQUIPMENT LIST .................................................................................................................. 27 11. System Check Results ..................................................................................................................... 28 12. SAR Test Data ................................................................................................................................... 30 Appendix A: EUT Photos .......................................................................................................................... 32 Appendix B: Test Setup Photos .............................................................................................................. 34 Appendix C: Probe Calibration Certificate ............................................................................................. 35 Appendix D: Dipole Calibration Report .................................................................................................. 52 Appendix E: SAR SYSTEM VALIDATION ................................................................................................ 63 Appendix F: The Check Data of Impedance and Return Loss ............................................................. 64 Report No.: TCT200722E011 Pa…

Text truncated - open the document above for the full version.

Ref : ACR.345.3.20.SATU.A SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK, CHONGQING ROAD FUYONG, BAO’ AN DISTRICT, SHENZHEN,CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 41/18 EPGO334 Calibrated at MVG US 2105 Barrett Park Dr. - Kennesaw, GA 30144 Calibration Date: 06/03/2020 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions. COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.SATU.A Page: 2/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Jérôme LUC Product Manager 6/05/2020 Checked by : Jérôme LUC Product Manager 6/05/2020 Approved by : Kim RUTKOWSKI Quality Manager 6/05/2020 Customer Name Distribution : Shenzhen STS Test Services Co., Ltd. Issue Date Modifications A 6/05/2020 Initial release COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.SATU.A Page: 3/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.5 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 5 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 7 5.4 Isotropy _________________________________________________________________ 8 6 List of Equipment .................................................................................................... 10 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.SATU.A Page: 4/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 41/18 EPGO334 Product Condition (new / used) New Frequency Range of Probe 0.45 GHz-6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.191 M Dipole 2: R2=0.216 M Dipole 3: R3=0.197 M A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEEE 1528 and CEI/IEC 62209 standards. Figure 1 – MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.20.SATU.A Page: 5/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 - 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plastic box illuminated with the fields from a half wave dipole. The dip…

Text truncated - open the document above for the full version.

Report No. SET2019-14271 Head 5-6GHz Date of Measurement Frequency (MHz) Return Loss (dB) Delta (%) Impedance Delta(ohm) 2017.11.27 5200 -9.69 - 25.64 - 2017.11.27 5400 -10.98 - 84.04 - 2017.11.27 5600 -13.52 - 36.63 - 2017.11.27 5800 -13.34 - 47.82 - 2019.11.26 5200 -9.70 -0.23 27.66 2.02 2019.11.26 5400 -11.02 -0.93 84.54 0.50 2019.11.26 5600 -13.34 4.23 36.02 -0.61 2019.11.26 5800 -13.49 0.69 51.67 3.85 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Dipole Verification Data> Head 5-6GHz Report No. SET2019-14271 Body 5-6GHz Date of Measurement Frequency (MHz) Return Loss (dB) Delta (%) Impedance Delta(ohm) 2017.11.27 5200 -8.86 - 23.97 - 2017.11.27 5400 -9.91 - 92.64 - 2017.11.27 5600 -11.72 - 32.59 - 2017.11.27 5800 -11.90 - 48.49 - 2019.11.26 5200 -8.63 5.44 24.83 0.86 2019.11.26 5400 -10.31 -9.65 92.19 -0.45 2019.11.26 5600 -11.88 -3.75 32.81 0.22 2019.11.26 5800 -11.63 6.41 52.91 4.42 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Dipole Verification Data> Body 5-6GHz —End of the Report—

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] FCC SAR TEST REPORT Report No.: STS2007350H01 Issued for Lightcomm Technology Co., Ltd. UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Product Name: TABLET Model Name: MID1032-MR Series Model: DL1036 FCC ID: XMF-MID1032 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 Max. Report SAR (1g): Body:0.224 W/kg S T L A B S Page 2 of 36 Report No.: STS2007350H01 Test Report Certification Applicant’s name ................. : Lightcomm Technology Co., Ltd. Address ................................. : UNIT 1306 13/F ARION COMMERCIAL CENTRE, 2-12 QUEEN'S ROAD WEST, SHEUNG WAN HK Manufacture's Name ............ : Huizhou Hengdu Electronics Co., Ltd Address ................................. : No.8 Huitai Road, Huinan High-tech Industrial Park, Huiao Avenue, Huizhou, Guangdong, China. Product description Product name ........................ : TABLET Model name ......................... : MID1032-MR Series Model .......................... : DL1036 Standards ............................. : ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 23 Jul. 2020~27 Jul. 2020 Date of Issue .......................................... : 28 Jul. 2020 Test Result.............................................. : Pass Testing Engineer : ( Aaron Bu) Technical Manager : (Sean she) Authorized Signatory : (Vita Li) Page 3 of 36 Report No.: STS2007350H01 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 6 1.3 Test Factory 6 2. Test Standards and Limits 7 3. SAR Measurement System 8 3.1 Definition of Specific Absorption Rate (SAR) 8 3.2 SAR System 8 4. Tissue Simulating Liquids 11 4.1 Simulating Liquids Parameter Check 11 5. SAR System Validation 13 5.1 Validation System 13 5.2 Validation Result 13 6. SAR Evaluation Procedures 14 7. EUT Antenna Location Sketch 15 7.1 SAR test exclusion consider table 16 8. EUT Test Position 18 8.1 Define Two Imaginary Lines on the Handset 18 9. Uncertainty 19 9.1 Measurement Uncertainty 19 9.2 System validation Uncertainty 20 10. Conducted Power Measurement 21 10.1 Test Result 21 10.2 Tune-up Power 22 11. EUT and Test Setup Photo 23 11.1 EUT Photo 23 11.2 Setup Photo 26 12. SAR Result Summary 28 12.1 Body-worn and Hotspot SAR 28 13. Equipment List 29 Appendix A. System Validation Plots 30 Appendix B. SAR Test Plots 34 Appendix C. Probe Calibration And Dipole Calibration Report 36 Page 4 of 36 Report No.: STS2007350H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 28 Jul. 2020 STS2007350H01 ALL Initial Issue Note: Format version of the report -V01 Page 5 of 36 Report No.: STS2007350H01 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name TABLET Model Name MID1032-MR Series Model DL1036 Model Difference Only different in model name. Test sample serial number： STS2007350H01-1 Battery Battery 1: Model: U2968180PV Rated Voltage: 3.8V Capacity: 5000mAh Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version MID1032MR_MT8168_LPDDR4_EMMC_V1_0 Software Version Android 10 Frequency Range 5GHz WLAN IEEE 802…

Text truncated - open the document above for the full version.