XMR2025HCM320ZBluetooth Module

Rev 1/26/2023 (Quectel Wireless Solutions Company Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 1, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:XMR2025HCM320Z [Quectel Wireless Solutions Company Limited.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Quectel Wireless Solutions Company Limited.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected] Rev 1/26/2023 Quectel Wireless Solutions Company Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 1, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:XMR2025HCM320Z [Quectel Wireless Solutions Company Limited.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Quectel Wireless Solutions Company Limited, FRN: 0018988279, Grantee Code: XMR (“the applicant”) certifies that, as of the date of the filing of application, Ikotek USA, Inc., FRN: 0033350331 (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: 9920 Pacific Heights Blvd., Ste. 150, #7025, San Diego, CA 92121 Email: [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Jean Hu Name: Joe Peterson Title: Certification Manager Title: CEO Email: [email protected] Email: [email protected] Date: 11 April, 2025 Date: 11 April, 2025

Quectel Wireless Solutions Company Limited Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 1, 2025 Subject; Modular Transmitter Application Company name: Bluetooth Module FCC ID: XMR2025HCM320Z Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for; FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: XMR2025HCM320Z has been examined against the following requirements. Requirement of FCC KDB996369 Comply（Y/N） 1. The modular transmitter must have its own RF shielding. Y The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y The EUT has its buffered modulation. Please see the Schematic Diagram. 3. The modular transmitter must have its own power supply regulation. Y The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, Y The EUT meets the FCC antenna requirements. Quectel Wireless Solutions Company Limited including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 5. The modular transmitter must be tested in a stand -alone configuration, i.e., the module must not be inside another device during testing. Y The EUT was tested with a test board, Please see test report and setup photo 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:XMR2024RG255CGL ” or “Contains FCC ID:XMR2024RG255CGL ” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In ad dition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Y The EUT complies with RF exposure requirement. Quectel Wireless Solutions Company Limited Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

Quectel Wireless Solutions Company Limited Date: September 1, 2025 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: XMR2025HCM320Z LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune Up BOM The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800

C:\Users\adina.liu\Desktop\进行中\HCM320Z FCC&IC&CE&RCM Kent吴千\签字文件\HCM320Z签字文件\FCC POA_Letter.docx Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: September 1, 2025 SUBJECT: XMR2025HCM320Z To Whom It May Concern: We, the undersigned, hereby authorize yanqiu.wang at Hefei Panwin Technology Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by yanqiu.wang on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Print Name: Jean Hu Title: Certification Section Manager Signature: On behalf of Company: Quectel Wireless Solutions Company Limited Telephone: +8602150086326 Ext: 800 E-mail: [email protected]

HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page1of9 RFTestReport Applicant: QuectelWirelessSolutionsCo.,Ltd. Address: Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016 TianlinRoad,MinhangDistrict,Shanghai,China200233 Product: BluetoothModule ModelNo.: HCM320Z BrandName: QUECTEL FCCID: XMR2025HCM320Z Standards: FCCCFR47Part2.1091 FCCKDB447498D01v06 ReportNo.: PD20250129-R3C IssueDate: 2025/08/28 TestResult: PASS* * TestingperformedatHefeiPanwinTechnologyCo.,Ltd.ontheaboveequipment indicatestheproductmeetstherequirementsoftherelevantstandards. ReviewedBy:JerryZhangApprovedBy:AlecYang HefeiPanwinTechnologyCo.,Ltd. Floor1,ZoneE,Plant2#,MingzhuIndustrialPark,No.106Chuangxin Avenue,High-techZone,HefeiCity,AnhuiProvince,China TEL:+86-0551-63811775 TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page2of9 RevisionHistory ReportNo.VersionDescriptionIssueDateNote PD20250129-R3C01InitialReport2025/08/25Valid Remark: ·Thesamplestestedhavebeenevaluatedinaccordancewith47CFRPart2.1091andFCCKDB447498D01v06, andhavebeenproventomeettheapplicablelimitrequirements. TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page3of9 CONTENTS 1TestLaboratory.............................................................................................................................................4 1.1NotesoftheTestReport.......................................................................................................................4 1.2TestingLaboratory.................................................................................................................................4 2GeneralDescriptionofEquipmentunderTest..........................................................................................5 2.1DetailsofApplication.............................................................................................................................5 2.2DetailsofEUT.......................................................................................................................................5 3TestCondition...............................................................................................................................................6 3.1LaboratoryEnvironment........................................................................................................................6 4MaximumPermissibleExposure(EMF).....................................................................................................7 ANNEXA–TestResults..................................................................................................................................8 ANNEXB–TheEUTAppearance..................................................................................................................9 TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page4of9 1TestLaboratory 1.1NotesoftheTestReport Thisreportisinvalidwithoutsignatureofauditorandapproverorwithanyalterations.Thereportshallnotbe partiallyreproducedwithoutwrittenapprovalofthetestingcompany.Entrustedtestresultsareonlyresponsiblefor incomingsamples.Ifthereisanyobjectiontothetestingreport,itshallberaisedtothetestingcompanywithin15 daysfromthedateofreceivingthereport.Inthetestresults,"NA"means"notapplicable",andthetestitems markedwith"∆"aresubcontractedprojects. 1.2TestingLaboratory CompanyNameHefeiPanwinTechnologyCo.,Ltd. Address Floor1,ZoneE,Plant2#,MingzhuIndustrialPark,No.106Chuangxin Avenue,High-techZone,HefeiCity,AnhuiProvince,China Telephone+86-0551-63811775 PostCode230031 TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page5of9 2GeneralDescriptionofEquipmentunderTest 2.1DetailsofApplication ApplicantQuectelWirelessSolutionsCo.,Ltd. ApplicantAddress Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016Tianlin Road,MinhangDistrict,Shanghai,China200233 ManufacturerQuectelWirelessSolutionsCo.,Ltd. ManufacturerAddress Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016Tianlin Road,MinhangDistrict,Shanghai,China200233 2.2DetailsofEUT ProductBluetoothModule ModelHCM320Z HWVersion R1.0 SWVersion HCM320ZAAR01A02M01 Note:ThedeclaredofproductspecificationforEUTand/orAntennapresentedinthereportareprovidedbythe manufacturer,andthemanufacturertakesalltheresponsibilitiesfortheaccuracyofproductspecification. TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page6of9 3TestCondition 3.1LaboratoryEnvironment Temperature Min.=20°C,Max.=30°C RelativeHumidityMin.=25%,Max.=75% GroundSystemResistance ＜1Ω Ambientnoiseischeckedandfoundverylowandincompliancewithrequirementofstandards. Reflectionofsurroundingobjectsisminimizedandincompliancewithrequirementofstandards. TestReport ReportNo.：PD20250129-R3C ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page7of9 4MaximumPermissibleExposure(EMF) AccordingtoANSI/IEEEC95.1-1992,thecriterialistedinTable1shallbeusedtoevaluatetheenvironmental impactofhumanexposuretoradiofrequency(RF)radiationasspecifiedin§1.1310. Table1to§1.1310(e)(1)—LimitsforMaximumPermissibleExposure(MPE) FrequencyRange (MHz) Electricfield strength (V/m) Magneticfield strength (A/m) Powerdensity (mW/cm 2 ) Averaging time (minutes) (i)LimitsforOccupational/ControlledExposure 0.3–3.06141.63*(100)≤6 3.0–301842/f4.89/f*(900/f 2 )<6 30–30061.40.1631.0<6 300–1,500----f/300<6 1,500–100,000----5<6 (ii)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)<30 1.34–30824/f2.19/f*(180/f 2 )<30 30–30027.50.0730.2<30 300–1,500----f/1500<30 1,500–100,000----1.0<30 f=frequencyinMHz.*=Plane-waveequivalentpowerdensity. Thetransmitterisusingexternalantennasthatoperateat20cmormorefromnearbypersons.Themaximum permittedleveliscalculatedusingthegeneralequation: S=PG/4 Π R 2 Where: S=powerdensit…

Text truncated - open the document above for the full version.

Antenna HCM320Z Datasheet Antenna Services Version: 1.0 Date: 2025-07-17 Status: Preliminary Antenna Services HCM320Z Datasheet Antenna_Datasheet 1 / 14 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Antenna Services HCM320Z Datasheet Antenna_Datasheet 2 / 14 Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2021. All rights reserved.. Antenna Services HCM320Z Datasheet Antenna_Datasheet 3 / 14 About the Document Revision History Version Date Author Note - 2025-07-17 Damon Zhang Creation of the document 1.0 2025-07-17 Damon Zhang First official release Antenna Services HCM320Z Datasheet Antenna_Datasheet 4 / 14 Contents About the Document ................................................................................................................................... 3 Contents ....................................................................................................................................................... 4 1 Product Description ..................................................................................…

Text truncated - open the document above for the full version.

HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page1of54 RFTestReport Applicant: QuectelWirelessSolutionsCo.,Ltd. Address: Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016 TianlinRoad,MinhangDistrict,Shanghai,China200233 Product: BluetoothModule ModelNo.: HCM320Z BrandName: QUECTEL FCCID: XMR2025HCM320Z Standards: FCCCFR47Part15C ReportNo.: PD20250129-R3A IssueDate: 2025/08/28 TestResult: PASS* * TestingperformedatHefeiPanwinTechnologyCo.,Ltd.ontheaboveequipment indicatestheproductmeetstherequirementsoftherelevantstandards. ReviewedBy:JerryZhangApprovedBy:AlecYang HefeiPanwinTechnologyCo.,Ltd. Floor1,ZoneE,Plant2#,MingzhuIndustrialPark,No.106Chuangxin Avenue,High-techZone,HefeiCity,AnhuiProvince,China TEL:+86-0551-63811775 TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page2of54 RevisionHistory ReportNo.VersionDescriptionIssueDateNote PD20250129-R3A01InitialReport2025/08/25Valid TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page3of54 CONTENTS 1GeneralInformation......................................................................................................................................5 1.1NotesoftheTestReport........................................................................................................................5 1.2TestFacility............................................................................................................................................5 1.3TestingLaboratory.................................................................................................................................5 2GeneralDescriptionofEquipmentunderTest..........................................................................................6 2.1DetailsofApplication.............................................................................................................................6 2.2GeneralInformation...............................................................................................................................6 2.3ApplicationStandards............................................................................................................................7 3TestCondition...............................................................................................................................................8 3.1TestConfiguration..................................................................................................................................8 3.2CarrierFrequencyChannel...................................................................................................................9 3.3EquipmentList.....................................................................................................................................10 3.4SupportEquipmentList.......................................................................................................................11 3.5TestUncertainty...................................................................................................................................11 4TestItemsDescription................................................................................................................................12 4.1OutputPowerMeasurement...............................................................................................................12 4.220dBand99%BandwidthMeasurement...........................................................................................14 4.3ConductedBandEdgesMeasurement...............................................................................................15 4.4DwellTimeMeasurement....................................................................................................................16 4.5HoppingChannelSeparationMeasurement......................................................................................17 4.6NumberofChannelMeasurement......................................................................................................18 4.7ConductedSpuriousEmissionMeasurement....................................................................................19 4.8RadiatedBandEdgesandSpuriousEmissionMeasurement...........................................................20 4.9ACConductedEmissionMeasurement ...............................................................................................24 4.10AntennaRequirements......................................................................................................................26 ANNEXA:TestResultsofConductedTest.................................................................................................27 ANNEXB:TestResultsofRadiatedTest....................................................................................................46 ANNEXC:TheEUTAppearance..................................................................................................................53 ANNEXD:TestSetupPhotograph...............................................................................................................54 TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page4of54 SummaryofTestResults No.TestCaseFCCRulesVerdict 1PeakOutputPower 15.247(b)(1) PASS 220dBand99%Bandwidth 15.247(a)(1) Reportingonly 3ConductedBandEdges 15.247(d) PASS 4DwellTimeofEachChannel 15.247(a)(1) PASS 5HoppingChannelSeparation 15.247(a)(1) PASS 6NumberofChannels 15.247(a)(1) PASS 7ConductedSpuriousEmission 15.247(d) PASS 8RadiatedBandEdgesandRadiatedSpuriousEmission 15.247(d) PASS 9ACConductedEmission 15.207 NA 10AntennaRequirement 15.203&15.247(b) PASS DateofTesting:2025/08/05to2025/08/24 DateofSampleReceived:2025/08/05 ·We,HefeiPanwinTechnologyCo.,Ltd.,wouldliketodeclarethatthetestedsamplehasbeenevaluatedin accordancewiththeproceduresgiveninappliedstan…

Text truncated - open the document above for the full version.

TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page31of54 3DH5-Ant1-2480 / / 99%Bandwidth DH5-Ant1-2402DH5-Ant1-2441 DH5-Ant1-24802DH5-Ant1-2402 TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page32of54 2DH5-Ant1-24412DH5-Ant1-2480 3DH5-Ant1-24023DH5-Ant1-2441 3DH5-Ant1-2480 / / TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page33of54 A.3ConductedBandEdgesMeasurement TestResult TestModeAntennaChNameFrequency[MHz]RefLevel[dBm]Result[dBm]Limit[dBm]Verdict DH5Ant1Low24023.51-49.32≤-16.49PASS DH5Ant1High24803.62-51.07≤-16.38PASS DH5Ant1LowHop_24022.43-47.13≤-17.57PASS DH5Ant1HighHop_24802.62-43.65≤-17.39PASS 2DH5Ant1Low2402-0.77-47.85≤-20.77PASS 2DH5Ant1High24800.29-53.16≤-19.71PASS 2DH5Ant1LowHop_2402-4.84-50.08≤-24.84PASS 2DH5Ant1HighHop_24801.15-47.35≤-18.85PASS 3DH5Ant1Low2402-1.18-51.14≤-21.18PASS 3DH5Ant1High24800.44-53.3≤-19.56PASS 3DH5Ant1LowHop_2402-5.59-50.24≤-25.59PASS 3DH5Ant1HighHop_2480-0.88-45.38≤-20.88PASS TestGraphs DH5-Ant1-2402-PASSDH5-Ant1-2480-PASS DH5-Ant1-Hop_2402-PASSDH5-Ant1-Hop_2480-PASS 2DH5-Ant1-2402-PASS2DH5-Ant1-2480-PASS TestReport ReportNo.：PD20250129-R3A ReportVersion：01 HefeiPanwinTechnologyCo.,Ltd.Panwin/PD/039-QR-0011/Ver.2.0 Page34of54 2DH5-Ant1-Hop_2402-PASS2DH5-Ant1-Hop_2480-PASS 3DH5-Ant1-2402-PASS3DH5…

Text truncated - open the document above for the full version.