XN3-Q1000-25Quantum 1000 Base Station

Quantum 1000 Base Station User Quantum 1000 Base Station Revision History Rev No. Issue Date Summary of Change 1.0 July 09 Initial Draft 1.1 24 Jul 09 Significant Changes Added Quantum 1000 Base Station User Guide Rev 1.1, Page Quantum 1000 Base Station User Guide Summary of Change Author Sajed Saeed Changes Added Steven Chaganis Rev 1.1, Page 1 of 70 Quantum 1000 Base Station Sajed Saeed Steven Chaganis Quantum 1000 Base Station User It is hoped that this document will be useful in understanding and using the PureWave note that the information provided herein is subject to change without notice. Always refer to the current set of Release Notes for the most the current features as they relate to the contained within this User Guide. Quantum 1000 Base Station User Guide Rev 1.1, Page NOTICE that this document will be useful in understanding and using the PureWave System. Please note that the information provided herein is subject to change without notice. Release Notes for the most upto date information and a as they relate to the PureWave system. These may be different to the information Rev 1.1, Page 2 of 70 System. Please and a description of These may be different to the information Quantum 1000 Base Station User It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to c • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in authority to operate this equipment. Note: This device must be professionally installed Quantum 1000 Base Station User Guide Rev 1.1, Page REGULATORY NOTICE It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC Changes or modifications not expressly approved in writing by PureWave Networks may void the user's authority to operate this equipment. This device must be professionally installed. Rev 1.1, Page 3 of 70 It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and orrect the interference by one or more of the following measures: the receiver is Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC writing by PureWave Networks may void the user's Quantum 1000 Base Station User PROPRIETARY STATEMENT © PureWave™ Networks, 2003-2007. All rights reserved. PureWave™ Networks has prepared this manual for use by PureWave Networks personnel, licensees, customers and customers of customers. The information contained herein is the property of PureWave Networks and shall neither be reproduced in whole nor in part without prior written approval from Pure PureWave Networks reserves the right to make changes without notice to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material presented, including, but not limited WARRANTY STATEMENT Hardware PureWave Inc (“PureWave” or the “Company”) warrants to the end product will conform in all material respects to the specifications provided with the hardware and will be free from defects in workmanship and materials, under normal use and ser from the date of original shipment by PureWave. PureWave's sole obligation under this limited warranty shall be, at PureWave's option, to repair the defective product or part, deliver to Customer an equivalent product or pa or if neither of the two foregoing options is reasonably possible, refund …

Text truncated - open the document above for the full version.

Quantum 1000 Base Station User 3. Grounding and Lightning Requirements Proper lightning protection requires t protection built into the PureWave equipment. The primary protectors offer the surge currents a direct path to earth ground versus the undesirable “sneak” paths it may find through the equip Properly installed and grounded primary protectors will dramatically increase the surge withstanding capabilities of the PureWave equipment. Surges that exceed the maximum ratings of the primary protector devices will eventually cause them to fail, short or open, as the application warrants, such that further surges will not damage the end equipment. While a failed primary protector still results in a service outage, it does prevent further damage more expensive end equipment. A Base Station that is installed outdoor on the tower or mast (ODU) is especially vulnerable to lightning surges. Good surge mitigation practice starts with the lightning rod and its connection to a proper sized down conductor. The ground down conductor should be as straight as possible and avoid incidental contact with other conductors such that it represents the path of least resistance to earth ground from the lightning rod. The tower/mast is also earth grounded to safety, and generally presents a less desirable path to ground to surge currents. ODU equipment and external primary protection devices are mounted to the tower/mast and should be bonded t at the same point on the down conductor. This practice is intended to avoid ground loop currents that may flow from differences in potential between the tower/mast structure and down conductor while large surge currents are flowing in them respectively. Good surge mitigation practice also makes use of shielded cables with peripheral shield grounding to minimize potentials induced on circuit conductors. These cables should also be secured to the tower/mast at regular intervals to create from conductors which are carrying surge currents. This practice avoids incidental contact or possible insulation breakdown from high surge potentials. A Base Station that is installed indoor units (IDU) requires similar protection as (ODU). Primary protection devices are installed on all cables just prior to entry of the facility and bonded to an earth ground stake. Likewise, the cable shields are grounded at the entry panel which should be bonded to the same earth ground stake. IDU equipment may also be vulnerable to surges entering via the AC power connection and steps should be taken to install a proper AC Surge Suppressor device to complete a well protected installation. 3.1 Lightning Protection Installation The following are considered to be the main elements that constitute the components of a lightning protection scheme.
Lightning Rod
Base Station and Antenna Grounding
Down Conductor
Coaxial and/or Cat 5 Cable Shield Grounding Quantum 1000 Base Station User Guide Rev 1.1, Page Grounding and Lightning Requirements Proper lightning protection requires the use of external primary protectors to complement the secondary protection built into the PureWave equipment. The primary protectors offer the surge currents a direct path to earth ground versus the undesirable “sneak” paths it may find through the equip Properly installed and grounded primary protectors will dramatically increase the surge withstanding capabilities of the PureWave equipment. Surges that exceed the maximum ratings of the primary protector devices will eventually cause them to fail, however these devices are generally designed to fail short or open, as the application warrants, such that further surges will not damage the end equipment. While a failed primary protector still results in a service outage, it does prevent further damage A Base Station that is installed outdoor on the tower or mast (ODU) is especially vulnerable to lightning surges. Good surge mitigation practice starts with the lightning rod and its connection to a proper sized The ground down conductor should be as straight as possible and avoid incidental contact with other conductors such that it represents the path of least resistance to earth ground from the lightning rod. The tower/mast is also earth grounded to keep its conductive elements at earth potential (0V) for personnel safety, and generally presents a less desirable path to ground to surge currents. ODU equipment and external primary protection devices are mounted to the tower/mast and should be bonded t at the same point on the down conductor. This practice is intended to avoid ground loop currents that may flow from differences in potential between the tower/mast structure and down conductor while large surge espectively. Good surge mitigation practice also makes use of shielded cables with peripheral shield grounding to minimize potentials induced on circuit conductors. These cables should also be secured to the tower/mast at regular intervals to create physical separation from conductors which are carrying surge currents. This practice avoids incidental contact or possible insulation breakdown from high surge potentials. A Base Station that is installed indoor units (IDU) requires similar protection as the outdoor installation (ODU). Primary protection devices are installed on all cables just prior to entry of the facility and bonded to an earth ground stake. Likewise, the cable shields are grounded at the entry panel which should be arth ground stake. IDU equipment may also be vulnerable to surges entering via the AC power connection and steps should be taken to install a proper AC Surge Suppressor device to complete a well protected installation. Lightning Protection Installation Components The following are considered to be the main elements that constitute the components of a lightning Base Station and Antenna Grounding Coaxial and/or Cat 5 Cable Shield Grounding Rev 1.1, Page 38 of 70 he use of external primary protectors to complement the secondary protection built into t…

Text truncated - open the document above for the full version.

Quantum 1000 Base Station User Quantum 1000 Base Station Revision History Rev No. Issue Date Summary of Change 1.0 July 09 Initial Draft 1.1 24 Jul 09 Significant Changes Added Quantum 1000 Base Station User Guide Rev 1.1, Page Quantum 1000 Base Station User Guide Summary of Change Author Sajed Saeed Changes Added Steven Chaganis Rev 1.1, Page 1 of 70 Quantum 1000 Base Station Sajed Saeed Steven Chaganis Quantum 1000 Base Station User It is hoped that this document will be useful in understanding and using the PureWave note that the information provided herein is subject to change without notice. Always refer to the current set of Release Notes for the most the current features as they relate to the contained within this User Guide. Quantum 1000 Base Station User Guide Rev 1.1, Page NOTICE that this document will be useful in understanding and using the PureWave System. Please note that the information provided herein is subject to change without notice. Release Notes for the most upto date information and a as they relate to the PureWave system. These may be different to the information Rev 1.1, Page 2 of 70 System. Please and a description of These may be different to the information Quantum 1000 Base Station User It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to c • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in authority to operate this equipment. Note: This device must be professionally installed Quantum 1000 Base Station User Guide Rev 1.1, Page REGULATORY NOTICE It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC Changes or modifications not expressly approved in writing by PureWave Networks may void the user's authority to operate this equipment. This device must be professionally installed. Rev 1.1, Page 3 of 70 It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and orrect the interference by one or more of the following measures: the receiver is Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC writing by PureWave Networks may void the user's Quantum 1000 Base Station User PROPRIETARY STATEMENT © PureWave™ Networks, 2003-2007. All rights reserved. PureWave™ Networks has prepared this manual for use by PureWave Networks personnel, licensees, customers and customers of customers. The information contained herein is the property of PureWave Networks and shall neither be reproduced in whole nor in part without prior written approval from Pure PureWave Networks reserves the right to make changes without notice to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material presented, including, but not limited WARRANTY STATEMENT Hardware PureWave Inc (“PureWave” or the “Company”) warrants to the end product will conform in all material respects to the specifications provided with the hardware and will be free from defects in workmanship and materials, under normal use and ser from the date of original shipment by PureWave. PureWave's sole obligation under this limited warranty shall be, at PureWave's option, to repair the defective product or part, deliver to Customer an equivalent product or pa or if neither of the two foregoing options is reasonably possible, refund …

Text truncated - open the document above for the full version.

Quantum 1000 Base Station User 3. Grounding and Lightning Requirements Proper lightning protection requires t protection built into the PureWave equipment. The primary protectors offer the surge currents a direct path to earth ground versus the undesirable “sneak” paths it may find through the equip Properly installed and grounded primary protectors will dramatically increase the surge withstanding capabilities of the PureWave equipment. Surges that exceed the maximum ratings of the primary protector devices will eventually cause them to fail, short or open, as the application warrants, such that further surges will not damage the end equipment. While a failed primary protector still results in a service outage, it does prevent further damage more expensive end equipment. A Base Station that is installed outdoor on the tower or mast (ODU) is especially vulnerable to lightning surges. Good surge mitigation practice starts with the lightning rod and its connection to a proper sized down conductor. The ground down conductor should be as straight as possible and avoid incidental contact with other conductors such that it represents the path of least resistance to earth ground from the lightning rod. The tower/mast is also earth grounded to safety, and generally presents a less desirable path to ground to surge currents. ODU equipment and external primary protection devices are mounted to the tower/mast and should be bonded t at the same point on the down conductor. This practice is intended to avoid ground loop currents that may flow from differences in potential between the tower/mast structure and down conductor while large surge currents are flowing in them respectively. Good surge mitigation practice also makes use of shielded cables with peripheral shield grounding to minimize potentials induced on circuit conductors. These cables should also be secured to the tower/mast at regular intervals to create from conductors which are carrying surge currents. This practice avoids incidental contact or possible insulation breakdown from high surge potentials. A Base Station that is installed indoor units (IDU) requires similar protection as (ODU). Primary protection devices are installed on all cables just prior to entry of the facility and bonded to an earth ground stake. Likewise, the cable shields are grounded at the entry panel which should be bonded to the same earth ground stake. IDU equipment may also be vulnerable to surges entering via the AC power connection and steps should be taken to install a proper AC Surge Suppressor device to complete a well protected installation. 3.1 Lightning Protection Installation The following are considered to be the main elements that constitute the components of a lightning protection scheme.
Lightning Rod
Base Station and Antenna Grounding
Down Conductor
Coaxial and/or Cat 5 Cable Shield Grounding Quantum 1000 Base Station User Guide Rev 1.1, Page Grounding and Lightning Requirements Proper lightning protection requires the use of external primary protectors to complement the secondary protection built into the PureWave equipment. The primary protectors offer the surge currents a direct path to earth ground versus the undesirable “sneak” paths it may find through the equip Properly installed and grounded primary protectors will dramatically increase the surge withstanding capabilities of the PureWave equipment. Surges that exceed the maximum ratings of the primary protector devices will eventually cause them to fail, however these devices are generally designed to fail short or open, as the application warrants, such that further surges will not damage the end equipment. While a failed primary protector still results in a service outage, it does prevent further damage A Base Station that is installed outdoor on the tower or mast (ODU) is especially vulnerable to lightning surges. Good surge mitigation practice starts with the lightning rod and its connection to a proper sized The ground down conductor should be as straight as possible and avoid incidental contact with other conductors such that it represents the path of least resistance to earth ground from the lightning rod. The tower/mast is also earth grounded to keep its conductive elements at earth potential (0V) for personnel safety, and generally presents a less desirable path to ground to surge currents. ODU equipment and external primary protection devices are mounted to the tower/mast and should be bonded t at the same point on the down conductor. This practice is intended to avoid ground loop currents that may flow from differences in potential between the tower/mast structure and down conductor while large surge espectively. Good surge mitigation practice also makes use of shielded cables with peripheral shield grounding to minimize potentials induced on circuit conductors. These cables should also be secured to the tower/mast at regular intervals to create physical separation from conductors which are carrying surge currents. This practice avoids incidental contact or possible insulation breakdown from high surge potentials. A Base Station that is installed indoor units (IDU) requires similar protection as the outdoor installation (ODU). Primary protection devices are installed on all cables just prior to entry of the facility and bonded to an earth ground stake. Likewise, the cable shields are grounded at the entry panel which should be arth ground stake. IDU equipment may also be vulnerable to surges entering via the AC power connection and steps should be taken to install a proper AC Surge Suppressor device to complete a well protected installation. Lightning Protection Installation Components The following are considered to be the main elements that constitute the components of a lightning Base Station and Antenna Grounding Coaxial and/or Cat 5 Cable Shield Grounding Rev 1.1, Page 38 of 70 he use of external primary protectors to complement the secondary protection built into t…

Text truncated - open the document above for the full version.

Quantum 1000 Base Station User Quantum 1000 Base Station Revision History Rev No. Issue Date Summary of Change 1.0 July 09 Initial Draft 1.1 24 Jul 09 Significant Changes Added Quantum 1000 Base Station User Guide Rev 1.1, Page Quantum 1000 Base Station User Guide Summary of Change Author Sajed Saeed Changes Added Steven Chaganis Rev 1.1, Page 1 of 70 Quantum 1000 Base Station Sajed Saeed Steven Chaganis Quantum 1000 Base Station User It is hoped that this document will be useful in understanding and using the PureWave note that the information provided herein is subject to change without notice. Always refer to the current set of Release Notes for the most the current features as they relate to the contained within this User Guide. Quantum 1000 Base Station User Guide Rev 1.1, Page NOTICE that this document will be useful in understanding and using the PureWave System. Please note that the information provided herein is subject to change without notice. Release Notes for the most upto date information and a as they relate to the PureWave system. These may be different to the information Rev 1.1, Page 2 of 70 System. Please and a description of These may be different to the information Quantum 1000 Base Station User It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to c • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in authority to operate this equipment. Note: This device must be professionally installed Quantum 1000 Base Station User Guide Rev 1.1, Page REGULATORY NOTICE It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC Changes or modifications not expressly approved in writing by PureWave Networks may void the user's authority to operate this equipment. This device must be professionally installed. Rev 1.1, Page 3 of 70 It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and orrect the interference by one or more of the following measures: the receiver is Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC writing by PureWave Networks may void the user's Quantum 1000 Base Station User PROPRIETARY STATEMENT © PureWave™ Networks, 2003-2007. All rights reserved. PureWave™ Networks has prepared this manual for use by PureWave Networks personnel, licensees, customers and customers of customers. The information contained herein is the property of PureWave Networks and shall neither be reproduced in whole nor in part without prior written approval from Pure PureWave Networks reserves the right to make changes without notice to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material presented, including, but not limited WARRANTY STATEMENT Hardware PureWave Inc (“PureWave” or the “Company”) warrants to the end product will conform in all material respects to the specifications provided with the hardware and will be free from defects in workmanship and materials, under normal use and ser from the date of original shipment by PureWave. PureWave's sole obligation under this limited warranty shall be, at PureWave's option, to repair the defective product or part, deliver to Customer an equivalent product or pa or if neither of the two foregoing options is reasonably possible, refund …

Text truncated - open the document above for the full version.