XN3-Q1000-25-5Quantum 1000 Base Station

Quantum 1000 Base Station User Quantum 1000 Base Station Revision History Rev No. Issue Date Summary of Change 1.0 July 09 Initial Draft 1.1 24 Jul 09 Significant Changes Added Quantum 1000 Base Station User Guide Rev 1.1, Page Quantum 1000 Base Station User Guide Summary of Change Author Sajed Saeed Changes Added Steven Chaganis Rev 1.1, Page 1 of 70 Quantum 1000 Base Station Sajed Saeed Steven Chaganis Quantum 1000 Base Station User It is hoped that this document will be useful in understanding and using the PureWave note that the information provided herein is subject to change without notice. Always refer to the current set of Release Notes for the most the current features as they relate to the contained within this User Guide. Quantum 1000 Base Station User Guide Rev 1.1, Page NOTICE that this document will be useful in understanding and using the PureWave System. Please note that the information provided herein is subject to change without notice. Release Notes for the most upto date information and a as they relate to the PureWave system. These may be different to the information Rev 1.1, Page 2 of 70 System. Please and a description of These may be different to the information Quantum 1000 Base Station User It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to c • Re-orient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in authority to operate this equipment. Note: This device must be professionally installed Quantum 1000 Base Station User Guide Rev 1.1, Page REGULATORY NOTICE It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC Changes or modifications not expressly approved in writing by PureWave Networks may void the user's authority to operate this equipment. This device must be professionally installed. Rev 1.1, Page 3 of 70 It is the intention of PureWave Networks to ensure that this equipment is tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and orrect the interference by one or more of the following measures: the receiver is Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC writing by PureWave Networks may void the user's Quantum 1000 Base Station User PROPRIETARY STATEMENT © PureWave™ Networks, 2003-2007. All rights reserved. PureWave™ Networks has prepared this manual for use by PureWave Networks personnel, licensees, customers and customers of customers. The information contained herein is the property of PureWave Networks and shall neither be reproduced in whole nor in part without prior written approval from Pure PureWave Networks reserves the right to make changes without notice to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material presented, including, but not limited WARRANTY STATEMENT Hardware PureWave Inc (“PureWave” or the “Company”) warrants to the end product will conform in all material respects to the specifications provided with the hardware and will be free from defects in workmanship and materials, under normal use and ser from the date of original shipment by PureWave. PureWave's sole obligation under this limited warranty shall be, at PureWave's option, to repair the defective product or part, deliver to Customer an equivalent product or pa or if neither of the two foregoing options is reasonably possible, refund …

Text truncated - open the document above for the full version.

2660-C Marine Way Mountain View, CA 94043 pwnets.com Tel: (650) 528-5200 Fax: (650) 528-5222 Date: August 11, 2009 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen: In reference to the application under FCC ID: XN3-Q1000-25-5 and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematic Block Diagram Theory of Operations These documents contain detailed system and equipment description and related information about the product that PureWave Networks considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, PureWave Networks considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Jas Dhaliwal Manager Compliance Engineering and Approvals PureWave Networks

24 X ALL IN SID E SURFACE S 3X AR 2 3 3 1 44 4X MRS MACHINED SURFACES A RE INI TIAL RELE ASE M. Me ndonca in w riting o f Pu reWave N etworks ." PROPR IETARY I NFOR MATION BY APP' D. A B C D 1 2 3 4 5 6 7 8 D C B A 7 8 6 5 4 3 2 1 QTY mann er w ithout t he p rior a pp roval IDEN TIFYIN G NU MBER PART OR OR DE SCRI PTION/SPECIFICATION ITEM MATERIAL: FINISH: DESIGNER CHECKED: ENGINEE R: MFG ENG QUAL EN G TITLE SIZE SCALE: DR AWING NO. SHEET OF REV REV . ECO NO . DATE SW CAD GENERAT ED DRAWI NG /REVISED DWG SEE HISTORY FIL E FOR ORI GINAL SIGNAT UR E. NOMEN CLATURE disc losed t o a ny o ther pa rty i n a ny It i s n ot t o b e u sed r eproduced o r FUJI 1 MS wift 1/24/ 09 125 AD-00386 -00 1 A 1:2 1 3 9 0 / 4 / 2 A MRS D 1/24/ 09 MS wift PR OJECTION BASE STATION, ENCLOS URE, TOLE RANCES ARE: 2PL . XX DIME NSIO NS ARE IN MILLIME TERS 3PL . XX X . 25 . 127 UNLE SS OT HERWISE SPEC IFIED ANGLES APP ROV ALS DATE 1 DO NOT MANUALL Y UPDATE DO N OT SCA LE D RAW ING PARTS LIST APPLI CATION NEXT ASS Y USED ON CAD GENERATED DR AWIN G, ASSEM BLY, propri etary to P ure Wa ve N etw orks. "The in formation c ontained he rein i s 4 2/4/0 9 SEE NOTES 5052-H32 AL ALU M SHEET 2.29 TH K W HITE T EXTUR E. O VER SP RAY A LL OWED E XCEP T W HERE I ND ICATED. I ND ICATED SURF ACES T O BE FREE OF PO WDER CO AT. PLACE PRODUCT LABEL 701-00893-001 for 2.5GHz or 701-00893-002 for 3.65GHz A PPRO XIMATEL Y W HERE SHO WN. 3 . PO WDER C OAT W ITH, C ARD INAL P /N C 03 1-WH120 SEM I G LOSS NO TES : UNLESS O THER WISE SPEC IFIED 1 . R EMOVE A LL B URR S A ND S HARP E DGE S 2 . I NSTALL I TEM 2 HE ATSINKS US ING I TEMS 3 M 3X6 FL AT HE AD SCRE W A ND 4 T HERM AL EPO XY P RIOR TO P OWD ER C OAT. a . I NSTALL I TEM 6 1 AT A TI ME. b . M IX I TEM 4 EP OXY AND C ATAL YST PE R M ANU FAC TU RERS I NSTRUCTIONS ( www. epoxies. co m). c. APP LY I TEM 4 T O F LAT M OUN TING SURF ACE OF I TEM 2 E NSURE 1 00% C OVERAGE . d . PL ACE I TEM 2 ON TO MOUN TING SURF ACE OF I TEM 1 A ND I NSTALL US ING I TEM 3 T O SECURE . I NSTALL AND TI GHTE N I TEM 3 F ROM TH E M IDD LE O F I TEM 2 AND WO RK O UT TO TH E E ND S. e . T ORQUE I TEM 3 T O 6 I N LBS T HEN W IPE A WAY A NY I TEM 4 T HAT F LOWS O UT A FTER F INAL T ORQUE . f. REPE AT S TEPS a - e T O COMPLE TE I TEM 2 I NSTALL ATION . g . C URE I TEM 4 PE R M ANU FAC TU RERS I NSTRUCTIONS ( www. epoxies. co m). 5 BC ITEM NO. QTY. PART NO. DESCRIPTION 1 1 390- 0038 6-001 ENCLOSURE HOUSING 2 3 398- 0045 3-002 HEATSINK,DELTA BS 3 24 FHP M3 X 6 FLATHEA D SCREW M3 X 6 4 AR 50-3 100 / CATALYS T 15 0 THERMAL EPOXY, EPOXIES Etc. 5

RF Exposure evaluation FCC 2.1091 The maximum measured RF conducted output power was 36.1 dBm. The highest antenna again that will be used with the equipment is 16.5 dBi. Therefore, the maximum calculated EIRP is 36.1 + 16.5 = 52.6 dBm = 182.0W. Using the formula for the Power Density, S = EIRP/ 4πD 2 , D = distance, where the Maximum Permissible Exposure (MPE) satisfies the FCC 1.1310 limit for General Population/Uncontrolled Exposure, can be calculated as: D ≥ √(EIRP/ 4πS) The MPE Limit is 1 mW/cm 2 , therefore D ≥ 120 cm is the minimum safe distance. The end user/installer will be instructed to maintain a distance of at least 120 cm between the antenna and persons.

EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002A Page 1 of 63 Test Report Report Number: 3183595MPK-002A Project Number: 3183595 February 26, 2010 Testing performed on the Quantum 1000 Base Station Model Number: QUANTUM 1000 FCC ID: XN3-Q1000-25-5 to FCC Part 27 Subpart M for PUREWAVE NETWORKS Test Performed by: Test Authorized by: Intertek Testing Services NA, Inc 1365 Adams Court Menlo Park, CA 94025 PUREWAVE NETWORKS 2660-C Marine Way Mountain View, CA 94043 USA Prepared by: Date: February 26, 2010 Krishna Vemuri, Senior EMC Engineer Reviewed by: Date: February 26, 2010 Ollie Moyrong, Engineering Manager This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002A Page 2 of 63 Report No. 3183595MPK-002A Equipment Under Test: Quantum 1000 Base Station Trade Name: PUREWAVE NETWORKS Model No.: QUANTUM 1000 Serial No.: EMCProto1 FCC ID: XN3-Q1000-25-5 Applicant: PUREWAVE NETWORKS Contact: Mr. Jas Dhaliwal Address: 2660-C Marine Way Mountain View, CA 94043 Country USA Tel. number: 650-528-5200 Fax number: 650-528-5222 Applicable Regulation: FCC Part 27 Subpart M Test Site Location: 1365 Adams Court Menlo Park, CA 94025 Date of Test: February 10 –16, 2010 We attest to the accuracy of this report: Krishna Vemuri Senior EMC Engineer Ollie Moyrong Engineering Manager EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002A Page 3 of 63 TABLE OF CONTENTS 1.0 Introduction ................................................................................................................... 5 1.1 Product Description.......................................................................................................... 5 1.2 Summary of Test Results ................................................................................................. 7 1.3 Test Configuration ........................................................................................................... 8 1.3.1 Support Equipment ................................................................................... 8 1.3.2 Block diagram of Test Setup.....................................................................8 1.4 Antenna Specifications..................................................................................................... 9 2.0 RF Power Output .......................................................................................................... 10 2.1 Requirement ................................................................................................................... 10 2.2 Test Procedure................................................................................................................ 10 2.3 Test Equipment .............................................................................................................. 10 2.4 Test Results .................................................................................................................... 10 3.0 Occupied Bandwidth .................................................................................................... 20 3.1 Requirement ................................................................................................................... 20 3.2 Test Procedure................................................................................................................ 20 3.3 Test Equipment .............................................................................................................. 20 3.4 Test Results ..................................................................................................................... 20 4.0 Spurious Emissions at Antenna Terminals .................................................................. 30 4.1 Requirement ................................................................................................................... 30 4.2 Test Procedure................................................................................................................ 30 4.3 Test Equipment .............................................................................................................. 30 4.4 Test Results .................................................................................................................... 30 5.0 Spurious Radiation ....................................................................................................... 52 5.1 Requirement ................................................................................................................... 52 5.2 Test Procedure................................................................................................................ 52 5.3 Test Equipment .............................................................................................................. 52 5.4 Test Results .................................................................................................................... 53 6.0 Frequency…

Text truncated - open the document above for the full version.

EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002 Page 1 of 77 Test Report Report Number: 3183595MPK-002 Project Number: 3183595 November 30, 2009 Testing performed on the Quantum 1000 Base Station Model Number: QUANTUM 1000 FCC ID: XN3-Q1000-25-5 to FCC Part 27 Subpart M for PUREWAVE NETWORKS Test Performed by: Test Authorized by: Intertek Testing Services NA, Inc 1365 Adams Court Menlo Park, CA 94025 PUREWAVE NETWORKS 2660-C Marine Way Mountain View, CA 94043 USA Prepared by: Date: November 30, 2009 Krishna Vemuri, Senior EMC Engineer Reviewed by: Date: November 30, 2009 Ollie Moyrong, Engineering Manager This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. This report must not be used to claim product endorsement by A2LA, NIST nor any other agency of the U.S. Government. EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002 Page 2 of 77 Report No. 3183595MPK-002 Equipment Under Test: Quantum 1000 Base Station Trade Name: PUREWAVE NETWORKS Model No.: QUANTUM 1000 Serial No.: EMCProto1 FCC ID: XN3-Q1000-25-5 Applicant: PUREWAVE NETWORKS Contact: Mr. Jas Dhaliwal Address: 2660-C Marine Way Mountain View, CA 94043 Country USA Tel. number: 650-528-5200 Fax number: 650-528-5222 Applicable Regulation: FCC Part 27 Subpart M Test Site Location: 1365 Adams Court Menlo Park, CA 94025 Date of Test: July 23 – November 5, 2009 We attest to the accuracy of this report: Krishna Vemuri Senior EMC Engineer Ollie Moyrong Engineering Manager EMC Report for PureWave Networks on the model QUANTUM 1000 File: 3183595MPK-002 Page 3 of 77 TABLE OF CONTENTS 1.0 Introduction ................................................................................................................... 5 1.1 Product Description.......................................................................................................... 5 1.2 Summary of Test Results ................................................................................................. 7 1.3 Test Configuration ........................................................................................................... 8 1.3.1 Support Equipment ................................................................................... 8 1.3.2 Block diagram of Test Setup.....................................................................8 1.4 Antenna Specifications..................................................................................................... 9 2.0 RF Power Output .......................................................................................................... 10 2.1 Requirement ................................................................................................................... 10 2.2 Test Procedure................................................................................................................ 10 2.3 Test Equipment .............................................................................................................. 10 2.4 Test Results .................................................................................................................... 10 3.0 Occupied Bandwidth .................................................................................................... 20 3.1 Requirement ................................................................................................................... 20 3.2 Test Procedure................................................................................................................ 20 3.3 Test Equipment .............................................................................................................. 20 3.4 Test Results ..................................................................................................................... 20 4.0 Spurious Emissions at Antenna Terminals .................................................................. 30 4.1 Requirement ................................................................................................................... 30 4.2 Test Procedure................................................................................................................ 30 4.3 Test Equipment .............................................................................................................. 30 4.4 Test Results .................................................................................................................... 30 5.0 Spurious Radiation ....................................................................................................... 67 5.1 Requirement ................................................................................................................... 67 5.2 Test Procedure................................................................................................................ 67 5.3 Test Equipment .............................................................................................................. 67 5.4 Test Results .................................................................................................................... 68 6.0 Frequency…

Text truncated - open the document above for the full version.