
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
User Manual microchip pet feeder sureflap.com EN: User Manual 1-18 DE: Bedienungsanleitung 19-36 NL: Handleiding 37-54 ES: Manual del usuario 55-72 DK: Brugervejledning 73-90 FR: Guide d’utilisation 91-108 1 EN Congratulations on the purchase of your new feeder! The Microchip Pet Feeder has been designed to recognise either the microchip already implanted in your pet or the SureFlap RFID Collar Tag (one included – packs of two sold separately), allowing your pet to access their food whilst keeping out other animals. Designed for use in multi-pet homes, the feeder will recognise authorised pets opening only for them. If an unauthorised greedy or bully pet tries to eat from the bowl it will not open, or if the feeder is already open the lid will close. The SureFeed bowls have an integrated seal on the top lip. This has been designed so that once the lid of the feeder is closed a seal is formed with the top of the bowl, keeping your pet’s food fresher for longer. Setting up the feeder to work in your home is a simple step by step process detailed in this user manual. We will guide you through from inserting the batteries to teaching your pet to use the feeder. When an authorised pet places their head inside the hoop on the front of the feeder their microchip or collar tag will be read. The lid only opens for pets (up to 32) who have been granted access. What’s in the box Microchip Pet Feeder Single Grey Bowl Split Grey Bowl Grey Mat SureFlap RFID Collar Tag EN Welcome to your new feeder 2 4 5 3 1 1 2 3 4 5 2 EN Contents Buttons & lights Normal operation Replacing the food (open/close lid) Bowls & mats Batteries Learning your pet into the feeder Teaching your pet to use the feeder PART 1 - Introducing your pet to the feeder PART 2 - Increasing the lid movement Introducing a cautious pet to the feeder Training multiple pets Where to place the feeder Lid close delay Cleaning Troubleshooting Warranty & Disclaimer 3 5 7 9 4 6 8 11 12 13 14 15 16 18 3 EN Slider unlocks/locks lid to allow removal for cleaning. See page 15 Light - see below for descriptions. Flashing Green (once every second) - Learn mode Green (constant) - Microchip has been successfully read (or learnt) Flashing Orange - Feeder is in Training Mode Flashing Red (every few seconds) - Low battery Lights Buttons & lights Add a pet - used to learn your pet’s microchip into the feeder. See page 8 Open / Close - allows access to the bowl for refill or cleaning. Training Function - used to teach your pet to use the feeder. See page 9 There are 3 main controls found at the rear of the feeder: Sensors used to recognise when your pet approaches the feeder. Feeder Mat - used to catch spilt food. 4 EN When a pet places its head into the hoop on the front of the feeder, the microchip reader is activated. Normal operation Once set up (see pages 8-10 for setup and training) the SureFeed Microchip Pet Feeder will stop greedy or bully pets from accessing food that is not theirs, giving you control over your pets’ prescription diets, medication and weight management. It is common that pets like to eat small amounts of food throughout the day. The SureFeed bowls with integrated seal have been designed to accommodate this regular use keeping food fresher throughout the day and reducing wastage. 1 2 3 4 The feeder lid will remain closed at all times until it is opened for food replacement - see page 5 - or an authorised pet approaches to eat. If the pet is authorised and allowed to eat, the lid will slide open for them. If an unauthorised greedy pet tries to eat from the feeder when the lid is closed then the lid will simply not open. Once your pet has eaten and moved away from the feeder the lid will close after a short delay (See page 14 to adjust the lid delay). This once again seals the bowl keeping the food fresher. Authorised pet Unauthorised pets 5 EN Press the open/close button ( ) to open the feeder. Fill a clean bowl with food. Ensure that you do not overfill the bowl as this may prevent the lid from closing fully and cause a mess. Clean the bowl or replace with a fresh bowl. Remove the dirty bowl for cleaning. Place the filled bowl into the feeder and press the open/close ( ) button to close the lid and seal the food. The feeder can now be used as normal. Before placing the bowl back into the feeder, ensure that all the surfaces on the feeder are wiped clean and there is no food debris under the bowl. This allows the lid to move freely and seal correctly onto the bowl. Replacing the food (Open/close lid) It is important to change your pet’s food on a daily basis, not only to ensure your pet stays happy and healthy, but also to keep the feeder clean and in working order. 1 2 3 4 6 5 To purchase additional bowls and mats ask a SureFlap stockist or visit: sureflap.com 6 EN If you have multiple feeders or if you just want to customise your feeder, you can purchase coloured bowls and mats separately. Suitable for a single portion of wet or dry food. The split bowl is designed for wet and dry food used at the same time. The silicone mat is placed on the front of the feeder (see page 3 for mat location) and is designed to collect food mess making it easy to clean daily. Bowls & mats To purchase additional bowls and mats ask a SureFlap stockist or visit: sureflap.com Available in blue, green, pink and grey. Please remove the bowl and mat from the feeder when cleaning. To keep the integrated seal in optimal condition we recommend hand washing only. The bowls and mat supplied have been specifically designed to work with SureFeed products. The SureFeed bowls have an integrated seal on their top lip. Once the lid of the feeder is closed, flies can’t get in and food stays fresher. The silicone mat helps control mess and can be removed daily for easy cleaning. Add some colour! Please ensure bowls and mats are washed before their first use. 7 EN Batteries First remove the mat, then turn the feeder upside down to access the battery compartments. Insert the…
Text truncated - open the document above for the full version.
SureFlap Ltd 6 & 7 The Irwin Centre Scotland Road, Dry Drayton, Cambridge CB23 8AR UK [email protected] +44 (0)1954 211664 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XO9-MPF001-001 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Parts List MPF001 BlkDia.pdf MPF001 Schem.pdf MPF001 OpDes.pdf MPF001 PartsLst.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of other information or documents accompanying this application. Sincerely, N P R Hill
FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 External Photo Figure 1: Front View Figure 2: Side View FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 3: Top View Figure 4: Back View FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 5: Bottom View
FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Label Location Figure 1: The compliance label is moulded onto the base of the product in the red box area. FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Label Artwork: Figure 2: Compliance Label Artwork 110mm 70mm
FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Label Location Figure 1: The compliance label is moulded onto the base of the product as shown above.. FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Label Artwork: Figure 2: Compliance Label Artwork 110mm 70mm
FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Internal Photo Figure 1: Removing the lid and the bowl Figure 2: Removing the battery covers FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 3: Infra-Red Receiver Figure 4: Infra-Red Emitter FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 5: Base removed FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 6: Antenna windings and Main PCB Figure 7: Antenna and antenna windings side view FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 8: Motor Cartridge removed FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 9: Motor Cartridge Bottom View Figure 10: Motor Cartridge Top View Figure 11: Motor Housing in the Motor Cartridge FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 PCB Figure 12: Main PCB Top and Bottom View FCC Detail FRN: 0019054196 FCC ID: XO9-MPF001-001 IC Detail Model ID: MPF001 IC Company NO: 8906A IC No: 8906A-MPF01001 Figure 13: Daughter PCB Top and Bottom View Figure 14: Emitter Board Figure 15: Receiver Board
|---------- ( Cambridge Ltd. ) ----------| Testing EMCEMC Consultancy EMC Training or : 01223 241140 (accounts) 23, Headington Drive, Cambridge. CB1 9HE Tel : 01954 251974 (test site) Fax : 01954 251907 email: [email protected] web : www.dbtechnology.co.uk REPORT ON ELECTROMAGNETIC COMPATIBILITY TESTS Performed at: TWENTY PENCE TEST SITE Twenty Pence Road, Cottenham, Cambridge U.K. CB24 8PS on Sureflap Ltd SureFeed dated 22nd September 2014 Document History Initial release23/09/141 Approved by Revised by Description of modifications Affected page(s) DateIssue Based on report template: v090319 1 of 40 Page: Test Report T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd. Equipment Under Test (EUT):SureFeed Test Commissioned by:Sureflap Ltd 7 The Irwin Centre Scotland Road Dry Drayton Cambridgeshire CB23 8AR Representative:Darren Cawthorne Test Started:1st August 2014 Test Completed:22nd August 2014 Test Engineer:Dave Smith/Peter Barlow Date of Report:22nd September 2014 Written by:Dave SmithChecked by:Derek Barlow Signature:Signature: Date:22nd September 2014Date:23rd September 2014 dB Technology can only report on the specific unit(s) tested at its site. The responsibility for extrapolating this data to a product line lies solely with the manufacturer. Test Standards Applied CFR 47Code of Federal Regulations: Pt 15 Subpart C - Radio Frequency Devices - Intentional Radiators RSS-210Licence-exempt Radio Apparatus (All Frequency Bands): Issue 8Category I Equipment 2 of 40 Page: Test Report T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd. Emissions Test Results Summary CFR 47PASS TestPortMethodLimitPASS/FAILNotes Conductedac powerANSI C63.4:2003 15.207N/A#1 Emissions Radiated ANSI C63.4:2003 15.209PASS Emissions specs_fccv100412 #1This test was not applicable because the EUT was powered by an internal battery and has no means of connection to an ac power source. RSS-210PASS TestPortMethodLimitPASS/FAILNotes RadiatedenclosureANSI C63.4:2003RSS_GENPASS Spurious Tables 5&6radiated Emissions specs_canadav111211 3 of 40 Page: Test Report T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd. Contents 40 PLOT 22 Radiated Emissions - Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 39 PLOT 21 Radiated Emissions - Bandwidth at 133kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 PLOT 20 Radiated Emissions - Bandwidth at 126kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 PLOT 19 Radiated Emissions - Idle (awaiting cat) - 250MHz to 1GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 PLOT 18 Radiated Emissions - Idle (awaiting cat) - 25MHz to 275MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 PLOT 17 Radiated Emissions - Cycling All Modes - 250MHz to 1GHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 PLOT 16 Radiated Emissions - Cycling All Modes - 25MHz to 275MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 PLOT 15 Radiated Emissions - Cycling All Modes - 1.705MHz to 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . 32 PLOT 14 Radiated Emissions - Cycling All Modes - 150kHz to 1.705MHz . . . . . . . . . . . . . . . . . . . . . . . . . 31 PLOT 13 Radiated Emissions - Cycling All Modes - 9kHz to 150kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 PLOT 12 Radiated Emissions - HF, High Voltage - 1.705MHz to 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . 29 PLOT 11 Radiated Emissions - HF, High Voltage - 150kHz to 1.705MHz . . . . . . . . . . . . . . . . . . . . . . . . . 28 PLOT 10 Radiated Emissions - HF, High Voltage - 9kHz to 150kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 PLOT 9 Radiated Emissions - LF, High Voltage - 1.705MHz to 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 PLOT 8 Radiated Emissions - LF, High Voltage - 150kHz to 1.705MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 PLOT 7 Radiated Emissions - LF, High Voltage - 9kHz to 150kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 PLOT 6 Radiated Emissions - HF, Low Voltage - 1.705MHz to 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 PLOT 5 Radiated Emissions - HF, Low Voltage - 150kHz to 1.705MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 PLOT 4 Radiated Emissions - HF, Low Voltage - 9kHz to 150kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 PLOT 3 Radiated Emissions - LF, Low Voltage - 1.705MHz to 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 PLOT 2 Radiated Emissions - LF, Low Voltage - 150kHz to 1.705MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PLOT 1 Radiated Emissions - LF, Low Voltage - 9kHz to 150kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.7 Radiated Emissions Results - Spurious Above 30MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.6 Radiated Emissions Results - Spurious <30MHz - 120V Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 Radiated Emissions Results - Spurious <30MHz - 80V Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.4 Radiated Emissions Results - Extrapolation with Distance for Carrier . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.3 Radiated Emissions Results - Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 13 …
Text truncated - open the document above for the full version.
|---------- ( Cambridge Ltd. ) ----------| Testing EMCEMC Consultancy EMC Training or : 01223 241140 (accounts) 23, Headington Drive, Cambridge. CB1 9HE Tel : 01954 251974 (test site) Fax : 01954 251907 email: [email protected] web : www.dbtechnology.co.uk Photos File For Test Report Performed at: TWENTY PENCE TEST SITE Twenty Pence Road, Cottenham, Cambridge U.K. CB24 8PS on Sureflap Ltd SureFeed dated 22nd September 2014 Document History Initial release23/09/141 Approved by Revised by Description of modifications Affected page(s) DateIssue Based on report template: v090319 1 of 3 Page: Test Report Photos File T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd. Photograph 1 Radiated Emissions - below 30MHz @10m Photograph 2 Radiated Emissions - below 30MHz @10m 2 of 3 Page: Test Report Photos File T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd. Photograph 3 Radiated Emissions - Carrier Extrapolation Photograph 4 Radiated Emissions - above 30MHz 3 of 3 Page: Test Report Photos File T5476 Test No: FCC ID: XO9-MPF001-001 IC: 8906A -MPF01001 R3392 1 Report No: Issue No: This report shall not be reproduced except in full, without the written approval of: dB Technology (Cambridge) Ltd.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.126 MHz - 0.1328 MHz | - |

A cat flap with an integrated short range RFID reader
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
Pet drinking station with RFID microchip reader and 2.4 GHz wireless link
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
SELECTIVE ENTRY PET DOOR
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
SELECTIVE ENTRY PET DOOR
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz