XQC-TILTZWAVE5Battery-powered device for home automation applications

© 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5 DISCLAIMER AND LIMITATION OF LIABILITY OTHER THAN THE LIMITED WARRANTY ABOVE, ECOLINK MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. YOU ACKNOWLEDGE THAT YOU ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE INTENDED USE. IN NO EVENT SHALL ECOLINK OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL, OR MULTIPLE DAMAGES, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, LOSS OR DAMAGE TO SOFTWARE OR DATA, OR DAMAGE TO EQUIPMENT ARISING OUT OF THE USE OF ANY PRODUCT, EVEN IF ECOLINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHER, IN NO EVENT SHALL THE LIABILITY OF ECOLINK OR ITS AFFILIATIES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. By the act of use, setup or assembly of the product, you accept all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the product, you are advised to return the product immediately in new and unused condition to the place of purchase. Some states do not allow the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply to you. LIMITED WARRANTY This limited warranty is provided by Ecolink Intelligent Technology (“Ecolink”) to you as the original purchaser of the product. Ecolink warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. The determination of whether the product is defective shall be made by Ecolink in its sole discretion with consideration given to the overall performance of the product. If Ecolink determines that any product is defective, Ecolink’s sole obligation and your sole and exclusive remedy shall be that Ecolink will replace the product. This warranty does not apply to damage caused by shipping or handling, or damage caused by accident, abuse, misuse, misapplication, ordinary wear, improper maintenance, failure to follow instructions or as a result of any unauthorized modifications. The foregoing limited warranty is and shall be in lieu of any and all other warranties, whether expressed or implied and of all other obligations or liabilities on the part of Ecolink. Ecolink neither assumes responsibility for, nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product. It is recommended that the customer check their equipment on a regular basis for proper operation RETURN POLICY Please visit us at www.discoverecolink.com/return to view our return policy. Z-Wave Plus Garage Door Tilt Sensor Installation Guide © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5 Product Overview The accelerometer based tilt sensor remotely monitors garages, hatches, roll-up doors, or any other tilt surface. Verify doors are closed when you leave, and automate lights to turn on inside your home when you arrive, all from your computer, tablet or smart phone. Features • Quick installation, flush mount bracket with screws or tape • Compatible with all Z-wave certified hubs & controllers • Detects angle of a door and transmits open/close status • Reports a tamper if the case is removed Specifications • For indoor use only • Operating frequency: 908.42, 916 MHz • Operating temperature: 0° – 49°C, 32° – 120°F • Operating humidity 5-95% non-condensing • 1 CR123A battery • Battery Life: 5 years Package contents • 1 x Z-Wave Tilt Sensor • 1 x CR123A batteries • 1 x Installation Guide • 1x Accessory Pack o 1x Mounting Bracket o 1x Double Sided Adhesive Tape o 2x Mounting Screws o 1x Mounting Bracket Screw Installation Instructions (1) Identify location for Z-Wave Plus Tilt Sensor. It is very important that the Tilt sensor be located on the top section of a multi-panel garage door. This will be the first section to tilt when the door is opened and the last to move to the vertical position when closing. IMPORTANT: The Tilt sensor must be located on the top panel AND have the arrow on the side of the sensor pointing UP in order to operate properly. © 2019 Ecolink Intelligent Technology Inc. PN TILT-ZWAVE5 (2) Mount the Tilt sensor mounting bracket a clean dry surface with the sensor screw facing the floor. The bracket can be mounted by the screws of adhesive tape. Caution: Use of the screws is only recommended for garage doors that are thicker than the screws are long. Use the adhesive tape for any garage door that is thinner than the length of the provided screws. (3) Adhesive Tape Mounting: Make sure that the desired mounting location on the door is clean and dry. The adhesive tape can withstand the temperature and humidity conditions of a typical garage. However, it is recommended that the sensor be mounted when air or surface temperatures are not extreme. Installing the adhesive tape when the conditions are right promotes a good long- lasting adhesive bond between the bracket and the surface of the door. Peel back the outer layer of one side of the adhesive tape, stick the tape to the garage door and press firmly. Peel back the outer layer on the other side of the tape and press the mounting bracket firmly onto the adhesive tape. (4) Screws Mounting: Place the mounting bracket in the desired position on the garage door. Use the mounting bracket as a template to mark the location of the screw holes with a pencil. Drill a small hole through each of the marked locations. Use a screwdriver to fasten the mounting bracket to the door. (5) Install 1x CR123A batteries provided in the package. (6) Before the sensor is secured to the mounting bracket. Follow the inclusion instructions to verify successful communication with th…

Text truncated - open the document above for the full version.

January 20, 2020 CETCB 114 Olinda Drive Brea, CA 92823 Gentlemen: This is a letter of authorization to accept Compatible Electronics, Inc., specifically including the employees of Compatible Electronics, as an Agent for Ecolink Intelligent Technology, 2055 Corte Del Nogal, Carlsbad, CA 92011, for a period of one year, to sign applications before the Commission on our behalf, to make representations to you on our behalf, and to receive and exchange data between our company and the Commission in connection with certification of the following Ecolink Intelligent Technology product: Model: TILT-ZWAVE5 Tilt Sensor under FCC Docket Number 20780 and General Docket Number 80-284 pursuant to Part l5 of FCC Rules and Regulations. Please also accept this letter as an attestation that neither Ecolink Intelligent Technology nor any of its officers, directors, or persons holding 5% or more of the outstanding stock or shares, voting or non-voting, have been denied federal benefits under section 5301 of the Anti-Drug-Abuse act of 1988,21 U.S.C. 853(a). In addition, Ecolink Intelligent Technology will notify the Federal Communications Commission if, at any time, the situation changes causing Ecolink Intelligent Technology to be denied federal benefits. I f you have any further questions or need additional i nformation, please feel free to give me a call at (855)432-6546. Sincerely, Jay Stone Director of Engineering Ecolink Intelligent Technology

1 January 20, 2020 Compatible Electronics TCB 114 Olinda Drive Brea, California 92823 Subject: TCB application submittal Gentlemen: We, Ecolink Intelligent Technology, would like to declare that the application being submitted for the device with FCC ID: XQC-TILTZWAVE5, has not been submitted to another TCB or FCC for certification. If you have any questions, please do not hesitate to contact us at (855)432-6546. Sincerely, Jay Stone Director of Engineering Ecolink Intelligent Technology

(1) January 20, 2020 Attention: A pplication Examiner RE: Request for Confidentiality Applicant: Ecolink Intelligent Technology FCC ID: XQC-TILTZWAVE5 To Whom It May Concern: Request is hereby submitted by Ecolink Intelligent Technology to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: •Schematics •Detailed Block Diagrams •Detailed Operational/Functional Description Eco link Intelligent Technology has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. The information contained in the confidential exhibits listed above is not available to the public. Since rely, Jay Stone Director of Engineering Ecolink I ntelligent Technology

材質 比例 品號 規格 視角 日期 品名 繪圖 VISION MM 單位 版本 審核 承認 Model: TILT-ZWAVE5 FCC ID: XQC-TILTZWAVE5 IC: 9863B-TILTZWAVE5 Made in Taiwan QR Code 13*13mm 19*14mm

This device FCC ID: The maximum power that the transmitter is capable of is0.25mWApplied duty cycle?no Using the following formula from section 4.3.1 of KDB 447498at test separation distances ≤ 50 mm [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] * [√f(GHz)] Duty Cycle 50.00% Value1-g (mW)10-g (mW) 0.05(118)117 "Value" shall be ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR 1-g power limit10-g power limit 157392 “source-based” time-averaging based on an inherent property or duty-cycle of a device is allowed. An example of this is the determination of exposure from a device that uses digital technology such as a time-division multiple-access (TDMA) scheme for transmission of a XQC-TILTZWAVE5 Max Peak Power (dBm)Min Separation distance (mm)*Frequency (Ghz) < 50mm power limits for above frequency and distance When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 0.9165-6.06

Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 1 of 17 FCC PART 15 SUBPART B & SUBPART C SECTION 15.249, RSS 210 and RSS GEN TEST REPORT for Garage Door Tilt Sensor Model: TILT-ZWAVE5 Prepared for ECOLINK INTELLIGENT TECHNOLOGY, INC 2055 CORTE DEL NOGAL CARLSBAD, CA 92011 Prepared by: _____________________ HOWARD HUANG Approved by: ____________________ JOEY MADLANGBAYAN COMPATIBLE ELECTRONICS INC. 20621 PASCAL WAY LAKE FOREST, CALIFORNIA 92630 (949) 587-0400 DATE: DECEMBER 9, 2019 REPORT APPENDICES TOTAL BODY A B C D E PAGES 17 2 2 2 11 21 55 This report shall not be reproduced except in full, without the written approval of Compatible Electronics, Inc Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 2 of 17 TABLE OF CONTENTS Section / Title PAGE GENERAL REPORT SUMMARY 4 SUMMARY OF TEST RESULTS 5 1. PURPOSE 6 2. ADMINISTRATIVE DATA 7 2.1 Location of Testing 7 2.2 Traceability Statement 7 2.3 Cognizant Personnel 7 2.4 Date Test Sample was Received 7 2.5 Disposition of the Test Sample 7 2.6 Abbreviations and Acronyms 7 3. APPLICABLE DOCUMENTS 8 4. DESCRIPTION OF TEST CONFIGURATION 9 4.1 Description of Test Configuration 9 5. LISTS OF EUT, ACCESSORIES AND TEST EQUIPMENT 11 5.1 EMI Test Equipment 11 6. TEST SITE DESCRIPTION 12 6.1 Test Facility Description 12 6.2 EUT Mounting, Bonding and Grounding 12 6.3 Facility Environmental Characteristics 12 6.4 Measurement Uncertainty 12 7. CHARACTERISTICS OF THE TRANSMITTER 13 7.1 Channel Number and Frequencies 13 7.2 Software 13 8. TEST PROCEDURES 14 8.1 RF Emissions 14 9. TEST PROCEDURE DEVIATIONS 17 10. CONCLUSIONS 17 Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 3 of 17 LIST OF APPENDICES APPENDIX TITLE A Laboratory Accreditations and Recognitions B Modifications to the EUT C Additional Models Covered Under This Report D Diagrams, Charts, and Photos • Test Setup Diagrams • Antenna and Amplifier Factors • Radiated Emissions Photos E Radiated Emissions Data Sheets LIST OF FIGURES FIGURE TITLE 1 Plot Map and Layout of Test Site Below 1GHz 2 Plot Map and Layout of Test Site Above 1GHz Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 4 of 17 GENERAL REPORT SUMMARY This electromagnetic emission test report is generated by Compatible Electronics Inc., which is an independent testing and consulting firm. The test report is based on testing performed by Compatible Electronics personnel according to the measurement procedures described in the test specifications given below and in the "Test Procedures" section of this report. The measurement data and conclusions appearing herein relate only to the sample tested and this report may not be reproduced in any form except in full, without the written permission of Compatible Electronics. This report must not be used by the client to claim product certification, approval or endorsement by NVLAP, NIST, or any agency of the federal government. Device Tested: Garage Door Tilt Sensor Model: TILT-ZWAVE5 S/N: None Product Description: The EUT is battery-powered device for home automation applications and will be installed on the garage door for notifications on garage door openings and closings. (Dimensions: 3” x 0.5” x 0.5”) Modifications: The EUT was not modified during the testing. Manufacturer: Ecolink Intelligent Technology, Inc. 2055 Corte Del Nogal Carlsbad, CA 92011 Test Dates: December 2-3, 2019 Test Specifications Covered by Accreditation: EMI requirements CFR Title 47, Part 15 Subpart B Sections 15.109, Subpart C Sections 15.205, 15.209, 15.249, RSS 210, Issue 9 (August 2016) + A1 (November 2017), and RSS Gen, Issue 5 Amendment 1 (March 2019) Test Procedure: ANSI C63.4: 2014 & C63.10: 2013 Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 5 of 17 SUMMARY OF TEST RESU LT S TEST DESCRIPTION RESULTS 1 Conducted RF Emissions, 150 kHz - 30 MHz. The EUT does not connect to AC mains, therefore this test was deemed unnecessary and thus was not performed. 2 Radiated RF Emissions & Harmonics, 9 kHz – 10 GHz. Complies with the limits of RSS-210, RSS-GEN, CFR Title 47 Part 15 Subpart B Section 15.109 & Subpart C Section 15.205, 15.209, & 15.249 Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 PASCAL WAY, LAKE FOREST, CALIFORNIA, 92630 • PH: (949) 587-0400 FX: (949) 587-0476 Page 6 of 17 1. PURPOSE This document is a qualification test report based on the Electromagnetic Interference (EMI) tests performed on the Garage Door Tilt Sensor Model: TILT-ZWAVE5. The EMI measurements were performed according to the measurement procedure described in ANSI C63.4: 2014 and C63.10: 2013. The tests were performed in order to determine whether the electromagnetic emissions from the equipment under test, referred to as EUT (equipment under test) hereafter, are within the specification limits defined by RSS 210, Issue 9 (August 2016) + A1 (November 2017), and RSS Gen, Issue 5 Amendment 1 (March 2019), and the Code of Federal Regulations Title 47, Part 15 Subpart B sections, 15.109, & Part 15 Subpart C sections 15.205, 15.209 and 15.249. Report Number: D91203R1 FCC ID: XQC-TILTZWAVE5 RSS 210, RSS-GEN, FCC Part 15 Subpart B & C Section 15.249 Test Report 20621 P…

Text truncated - open the document above for the full version.