XQLSD0912425Wireless Keyboard with Touchpad

Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 1 of 6 Wireless Keyboard with touchpad Installation& User’s Guide Version:A1 2009/12 Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 2 of 6 1．Overview „ 2.4GHz Wireless Technology range up to 10M „ Aluminum compact size keyboard with built-in high resolution touchpad „ Additional 4 web browsing and multimedia hot keys „ Click and Right Click buttons „ Exquisite mini USB receiver „ Plug and play with Windows XP/Vista 2．Package contents „ Wireless Touchpad Keyboard „ USB Wireless Receiver „ AAA Battery „ User's Manual 3．System Requirements „ Windows Vista, XP or 2000 „ USB port 4．Specifications Windows 2000 /XP/Vista compatible Interface:USB 2.0 Dimension:280(L)X112(W)X17(H) mm Weight:280g Peak force: 55± 10gf Total Travel (mm): 3.0± 0.5mm Switch Life:8million Cycles Accessary: 2 AAA batteries, USB Mini Receiver RF receiver: 47.5x19.5x10mm Operation Frequency: 2.4GHz RF Transmission Distance: 10 meters (depend on user environment) Hot keys: 4 hot keys,Touch pad, Click and right click keys Operation temperature:0 to 50 degrees Storage temperature:-20 to 70 degrees FCC,CE and RoHS Approval Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 3 of 6 5．Installation 1. Open the battery compartment located underneath the wireless keyboard and install the AAA battery. Note:Follow the polarity signs in the battery compartmnet to make sure the battery is installed correctly. 2. Insert the USB Receiver into an available USB port. 3. The Found New Hardware Wizard appears and the OS will install the driver automatically.No other steps are necessary. Your are now ready to begin using your wireless keyboard 6. Multimedia keys： Multimedia keys Multimedia keys Description Play/Pause Switches between Play and Pause of DVD/VCD/MP3/Audio media. Once Pause is pressed, pressing this button again resumes play. Mute Mutes the computer’s sound volume. Press it again to turn the system volume back on. V+ Increases the computer’s sound volume. Hold down to increase volume more quickly. V- Decreases the computer’s sound volume. Hold down to decrease volume more quickly. Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 4 of 6 7.Mini keyboard mode Table below shows the original keys combined with Fn (Fn + original key) of Mini-keyboard. Function Key Usage: Status Fn Num Lock Fn Num Lock Fn Num Lock Fn Num Lock Key Location OFF OFF ON OFF OFF ON ON ON 7 &7 Home 7 7 8 *8 ↑ 8 8 9 (9 PgUp 9 9 0 )0 * * 0 U U ← 4 U I I 5 I O O → 6 O P P - - P J J End 1 J K K ↓ 2 K L L PgDn 3 L :; :; + + :; M M Ins 0 M >. >. Del . >. ?/ ?/ / / ?/ Enter Enter (L) Enter(R) Enter(R) Enter(L) F1/F11 F1 F11 F1 F11 F2/F12 F2 F12 F2 F12 F10/ ScrLock F10 ScrLock F10 ScrLock ↑/PgUp ↑ Page Up ↑ Page Up ↓/PgDn ↓ Page Down ↓ Page Down ←/Home ← Home ← Home →/End → End → End Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 5 of 6 8. Using Touchpad 9.Disposal If possible,dispose of the used appliance at a recycling centre. Do not dispose of the used appliance with the household waste. 10.Safety z Never try to open or to repair this product yourself. z Keep this appliance away from fluids,such as water. 11.Copyright z Reproduction of this manual or any part of it is prohibited without permission from Sunday Electronics Technology co., Ltd. Sunday Electronics Technology Co., Ltd. S-KW425TG Ver. A1 Page 6 of 6 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help

December 10, 2009 December 10, 2009 XQLSD0912425

FCC ID:

FCC ID Label Location

Operation Description This wireless keyboard gets power from 2AAA alkaline batteries or recharging batteries. The main keyboard IC is HT82K68E48, and the ID code is stored in EEPROM (24C02). The working frequency of RF IC NRF24L01 is 16MHz, and there are 77 channels in 2 groups hopping channels from 2.404GHz to 2.480GHz. 256 bits ID number allows the receiver to identify its keyboard. There are three modes when the keyboard is in funct-ion, normal mode, idle mode and sleep mode. In normal mode, the power is not higher than 3V 10mA. When it is not in use for 3 seconds, it changes to idle mode, and the power is not higher than 3V 2mA. After 8 seconds in idle mode, it changes to sleep mode, and the power is not higher than 3V 20uA.

ISO/IEC17025 Accredited Lab. Report No: FCC0912081-01 File reference No: 2010-01-08 Applicant: Guangzhou Sunday Electronics Co., Ltd. Product: Wireless Keyboard with Touchpad Model No: S-KW425TG Brand Name: SUNDAY Test Standards: FCC Part 15 Subpart C, Paragraph 15.249 Test result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4&FCC Part 15 Subpart C, Paragraph 15.249 regulations for the evaluation of electromagnetic compatibility Approved By Jack Chung Manager Dated: Dec 08, 2009 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TECHNOLOGY CONSULTING CO LTD East 5/Block 4, Anhua Industrial Zone, No.8,Tairan Rd. CheGongMiao, FuTian District, Shenzhen, CHINA. Tel (755) 83448688 Fax (755) 83442996 Report No: 0912081-01 Page 2 of 37 Date: 2010-01-08 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement： The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19. The testing quality system of our laboratory meet with ISO/IEC-17025 requirements, which is approved by CNAS. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: CNAS-LAB Code: L2292 The EMC Laboratory has been assessed and in compliance with CNAS-CL01 accreditation criteria for testing Laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of testing Laboratories. FCC-Registration No.: 899988 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 899988. IC- Registration No.: IC5205A-01 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. The acceptance letter from the IC is maintained in our files. Registration IC No.: 5205A-01. Report No: 0912081-01 Page 3 of 37 Date: 2010-01-08 TEST REPORT The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shenzhen Timeway Technology Consulting Co .,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen Timeway Technology Consulting co .,Ltd to his customer. Supplier or others persons directly concerned. Shenzhen Timeway Technology Consulting co .,Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen Timeway Technology Consulting co .,Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 4 1.1 Test Lab Details................................................................................................ 4 1.2 Applicant Details.............................................................................................. 4 1.3 Description of EUT .......................................................................................... 4 1.4 Submitted Sample............................................................................................. 4 1.5 Test Duration.................................................................................................... 4 1.6 Test Uncertainty.................................................................................................5 1.7 Test By.......................................................................................................... 5 2.0 List of Measurement Equipment......................................................................... 5 3.0 Technical Details............................................................................................. 6 3.1 Summary of Test Results..................................................................................... 6 3.2 Test Standards.................................................................................................. 6 4.0 EUT Modification............................................................................................. 6 5.0 Power Line Conducted Emission Test...................................................................... 7 5.1 Schematics of the Test........................................................................................ 7 5.2 Test Method and Test Procedure............................................................................ 7 5.3 Configuration of the EUT.................................................................................... 7 5.4 EUT Operating Condition..…

Text truncated - open the document above for the full version.

Radiated Emissions