XR2WIZ6000Serial to Wireless LAN Device Server

WIZ6000 User’s Manual (WIZnet, Inc.) - 1 - WIZ6000 User’s Manual (Version 0.9) ©2009 WIZnet Co., Inc. All Rights Reserved. ☞ For more information, visit our website at http://www.wiznet.co.kr WIZ6000 User’s Manual (WIZnet, Inc.) - 2 - Document Revision History Date Revision Changes 2009-09-09 V0.9 Beta Release WIZ6000 User’s Manual (WIZnet, Inc.) - 3 - Certification Information CE for Class B ITE INFORMATION TO THE USER Hereby, WIZnet. Declares that this WIZ6000 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. WARNING: This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. FCC for Class B ITE INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no Guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. KCC for Class B ITE INFORMATION TO THE USER This equipment has been tested for a Class B digital device. - Trade Name or Applicant : WIZnet, Inc. - Equipment Name : Serial to Wireless LAN Device Server - Basic Model Number : WIZ6000 - Manufacturer / Country of Origin : WIZnet, Inc. / KOREA - Certification Number : WWW-WIZ6000-S2W(B) WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference. Near-Body Operation To maintain compli ance with FCC RF exposure re quirements, maint ain a 20Cm, s eparation distance between the u ser's body a nd the phone, including the antenna, whether extended or retracted. WIZ6000 User’s Manual (WIZnet, Inc.) - 4 - WIZnet’s Online Technical Support If you have any questions about our products, please visit our website and submit your questions on the Q&A Board . We will reply your questions as soon as possible COPYRIGHT NOTICE Copyright 2009 WIZnet, Inc. All Rights Reserved. Technical Support: [email protected] Sales & Distribution: [email protected] For more information, visit our website at http://www.wiznet.co.kr C C L L I I C C K K WIZ6000 User’s Manual (WIZnet, Inc.) - 5 - Contents 1. Introduction ........................................................................................................................ 1 1.1 Products Contents ............................................................................................. 2 1.2 Product Specification ......................................................................................... 3 1.2.1 WIZ6000 Device Server Interface ..................................................................... 5 2. Getting Started ................................................................................................................... 6 2.1 Hardware Installation ................................................................................................. 6 2.2 Configuration ............................................................................................................. 6 2.2.1 Connecting the Web page of WIZ6000 .............................................................. 6 2.2.2 Checking Status ............................................................................................... 7 2.2.3 Network Setting ............................................................................................... 9 2.2.4 Wireless Setting ............................................................................................. 10 2.2.4.1 Mode Selection .................................................................................... 10 2.2.4.2 IP Configuration in Each Mode .............................................................. 12 2.2.4.3 Access Point Setup............................................................................... 14 2.2.4.4 Gateway Setup ..................................................................................... 19 2.2.4.5 Client Setup ......................................................................................... 23 2.2.5 Serial Setting ................................................................................................. 24 2.2.6 Security Setup ............................................................................................... 27 2.2.7 Others ........................................................................................................... 27 2.2.7.1 Password ............................................................................................. 27 2.2.7.2 Log ...................................................................................................... 27 2.2.7.3 Upgrade ............................................................................................…

Text truncated - open the document above for the full version.

WIZNET Co., LTD. 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea Date: February 1, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; WIZNET Co., LTD. 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Harvey Sung Director REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

WIZNET Co., LTD. 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea Date: February 1, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA LETTER OF AUTHORIZATION We, the undersigned, hereby authorize Harvey Sung of DIGITAL EMC CO., LTD. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: XR2WIZ6000 including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DIGITAL EMC CO., LTD. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from WIZNET Co., LTD. Sincerely, Byungkook Kim Senior Engineer

WIZNET Co., LTD. 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea Date: February 1, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: XR2WIZ6000 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, WIZNET Co., LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give WIZNET Co., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description File name PERMANENT 1 Block Diagram Block Diagram_XR2WIZ6000.pdf 2 Operational Description Operational Description_XR2WIZ6000.pdf 3 Schematics Schematic_XR2WIZ6000.pdf 4 Part Lists Part List_XR2WIZ6000.pdf SHORT-TERM 5 External Photos Ext Photo_XR2WIZ6000.pdf 6 Internal Photos Int Photo_XR2WIZ6000.pdf 7 Test-Setup Photos Test Photo_XR2WIZ6000.pdf 8 Users Manual User Manual_XR2WIZ6000.pdf The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Byungkook Kim Senior Engineer

FCCID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 1 FCCID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 2 FCCID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 3 FCCID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 4

FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 1 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 2 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 3 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 4 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 5 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 6

W5E-WO-03L Approval Sheet, WINiZEN Page 1 Check Check Approval Part No.W5E-WO-03L WiFi Dipole Antenna (2.4 GHz, Left-handed SMA) WINiZEN Co., Ltd. W5E-WO-03L Approval Sheet, WINiZEN Page 2 Revision History E D Date Author Description IR 2009.8.29 W.I.Kwak First issuance W5E-WO-03L Approval Sheet, WINiZEN Page 3 To: WIZNET Co., Ltd. Approval Sheet Product WiFi Dipole Antenna Model No. Manufacturer P/N W5E-WO-03L NO CODE DESCRIPTION REMARK 1 2.4 GHz WiFi Dipole Antenna Left-handed SMA 2 3 4 5 6 August 29, 2009 WINiZEN Co., Ltd. T205 Jinleekwan, 103-6 Munji-dong, Yuseong-gu, Daejeon-shi, Korea Tel: 042-866-6570, Fax: 042-866-6637 Issue Check Approval 2009/8/29 2009/8/29 W5E-WO-03L Approval Sheet, WINiZEN Page 4 - Contents – 1. Specifications 2. Mechanical Drawing 3. Test Method 3-1 Test Equipments 3-2 Test Equipment Setting 3-3 Calibration 4. Test Procedure 4-1 VSWR 4-2 Gain and Radiation Patterns 5. Measurement Data 5-1 VSWR 5-2 Return Loss 5-3 Smith Chart 5-4 Radiation Pattern 6. QC Process 7. Reliability Test 8. Packaging 9. RoHS Data W5E-WO-03L Approval Sheet, WINiZEN Page 5 1. Specifications Specifications Electrical Specifications Frequency Range 2400 ~ 2483.5 MHz Band Width 83.5 (MHz) V.S.W.R ( Min ) 1.9 : 1 Gain ( Max ) 2.5 ± 1 ( dBi ) Input Impedance 50 (Ω) Polarization Linear Mechanical Specifications Antenna Size See drawing Connector SMA Male (Left-handed) Operation Temperature -20 ~ 70 (°C) Operation Humidity 10 ~ 90 (%) Option Others W5E-WO-03L Approval Sheet, WINiZEN Page 6 1-5 2-5 3-5 4-5 5-5 2. Mechanical Drawing W5E-WO-03L Approval Sheet, WINiZEN Page 7 3. Test Method 3-1. Test Equipments Network Analyzer Agilent E8357A Calibration Kit Agilent E8357A Adaptor SMA Type Female ↔ SMA male Measurement Cable SPS-2801-400-SPS(Insulated Wire Inc.) 3-2. Test Equipment Setting Display Dual Channel : On Split Display : On Menu Number of Points : 201 Power : 0 dBm Measure Channel 1 : S11 Channel 2 : S21 3-3. Calibration Calibration- Cal. Kit : 50 Ω Calibration menu → Full-2 Port Reflection Forward : Open → Short → Load Reverse : Open → Short → Load Done Transmission Do Both → FWD + REV Done Isolation Omit Isolation Done W5E-WO-03L Approval Sheet, WINiZEN Page 8 4. Test Procedure 4-1. V.S.W.R Step 1. Connect the antenna to Port 1 of the Network Analyzer with a Cable Assembly. Step 2. Set Marker Pointer of the Network Analyzer to the target frequency. Step 3. Measure and check if the V.S.W.R. values are within 1.9. Step 4. Record Data. W5E-WO-03L Approval Sheet, WINiZEN Page 9 4-2. Gain and Radiation Patterns Step 1 Calibrate the Anechoic Chamber and Measurement System with a Dipole Antenna and a Horn Antenna. Prepare the Software Program to control the system. Step 2. Place the Antenna for measurement, on the location within the Anechoic Chamber. Step 3. Start the Software Program and Measurement. Step 4. Measure and record Data. W5E-WO-03L Approval Sheet, WINiZEN Page 10 5. Measurement Data Model Name W5E-WO-03L Engineer W.I.Kwak Antenna WiFi Dipole Antenna Frequency 2400 MHz ~ 2483.5 MHz Items Spec. Test Result Frequency 2400 MHz ~ 2483.5 MHz OK VSWR(Min) < 1.9 OK Gain(Max) 2.5±1.0 dBi OK W5E-WO-03L Approval Sheet, WINiZEN Page 11 5-1 VSWR 5-2 Return Loss W5E-WO-03L Approval Sheet, WINiZEN Page 12 5-4 Radiation Pattern a. Azimuth Pattern c. Elevation Pattern W5E-WO-03L Approval Sheet, WINiZEN Page 13 6. QC Process W5E-WO-03L Approval Sheet, WINiZEN Page 14 7. Reliability Test Item Specifications Conditions Test Result Salt-water Resistance No change of material characteristic Temperature of 35°C, Concentration of 5%, Let stand for 48 hours OK Humidity Resistance Changeable range of V.S.WR value± 0.5 No change of material characteristic Temperature of 40°C, Humidity of 95%, Let stand for 96 hours OK Temperature Test Temperature(°C) Changeable range of V.S.WR value± 0.5 No change of material characteristic Increasing from +25°C, 65% to +60°C, 30%; 35min / Keeping on +60°C, 30% for 6hour / Decreasing from +60°C, 30% to +40°C, 80%; 20min / Keeping on +40°C, 80% for 8hour / Decreasing from +40°C, 80% to -20°C, 0%; 60min / Keeping on -20°C, 0% for 4hour / Increasing from -20°C, 0% to 25°C, 65%; 45min / Keeping on 25°C for 3hour / 5Cycle time = 118hour and 20min OK Drop Antenna 1.5m Steel Plate (2t) No disconnection No crack or damage Drop the antenna at 1.5m height to the steel plate (2t) of ground OK W5E-WO-03L Approval Sheet, WINiZEN Page 15 8. Packaging

Main Part Location WLAN Module Part Location Top Sides Bottom

-~ - - The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: ▪=+- =+ = - ▪S=- =X = - FCCID: XR2WIZ6000 MPE Calculations(WLAN: 802.11b) Frequency range :2412MHz2462MHz Maximum RF output power :14.54dBm Maximum antenna peak gain :3.377dBi The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. EIRPPGNote 14.54dBm3.38dBiP = Power input to the antenna(dBm) 17.917dBmG = Power gain of the antenna(dBi) Power density at the specific separation P G / ( 4 R 2 π ) Note 28.4452.176 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) 0.01231 mW/cm 2 P = Power input to the antenna(mW) The power desity at 20cm does not exceed the 1.0mW/cm 2 . G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 . TRF-RF-206(00)100216 -~ - - The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: ▪=+- =+ = - ▪S=- =X = - FCCID: XR2WIZ6000 MPE Calculations(WLAN: 802.11g) Frequency range :2412MHz2462MHz Maximum RF output power :12.56dBm Maximum antenna peak gain :3.377dBi The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. EIRPPGNote 12.56dBm3.38dBiP = Power input to the antenna(dBm) 15.937dBmG = Power gain of the antenna(dBi) Power density at the specific separation P G / ( 4 R 2 π ) Note 18.0302.176 / ( 4 X 20 2 X π )S = Maximum power dencity(mW/cm 2 ) 0.00781 mW/cm 2 P = Power input to the antenna(mW) The power desity at 20cm does not exceed the 1.0mW/cm 2 . G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 . TRF-RF-206(00)100216

DEMC#DR50111002Y TRF-RF-201(01)100216 Page 1 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. DIGITAL EMC CO., LTD. 683-3, Yubang-Dong, Yongin-Si, Kyunggi-Do, Korea. 449-080 Tel: +82-31-321-2664 Fax: +82-31-321-1664 http://www.digitalemc.com CERTIFICATION OF COMPLIANCE WIZNET Co., LTD. 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea Dates of Tests: January 21 ~ February 12, 2010 Test Report S/N: DR50111002Y Test Site : DIGITAL EMC CO., LTD. FCC ID APPLICANT Purpose : Original Grant FCC Equipment Class : Digital Transmission System (DTS) Device name : Serial to Wireless LAN Device Server Manufacturer : WIZNET Co., LTD. FCC ID : XR2WIZ6000 Model name : WIZ6000 Test Device Serial number : Identical prototype FCC Rule Part(s) : FCC Part 15.247 Subpart C ANSI C-63.4-2003 Frequency Range : 2412 ~ 2462 MHz Max. Output power : 802.11b – 14.54 dBm Conducted 802.11g – 12.56 dBm Conducted Data of issue : February 18, 2010 The Test results relate only to the tested sample. It is not allowed to copy this report even partly without the allowance of DIGITAL EMC CO., LTD. XR2WIZ6000 WIZNET Co., LTD. DEMC#DR50111002Y TRF-RF-201(01)100216 Page 2 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------ 2. EQUIPMENT INFORMATION --------------------------------------------------------------------------- - 2.1 EQUIPMENT DESCRIPTION ------------------------------------------------------------------------ 2.2 QNCILLARY EQUIPMENT -------------------------------------------------------------------------- 3. INFORMATION ABOUT TEST ITEM ------------------------------------------------------------------ - 3.1 TESTED FREQUENCY ------------------------------------------------------------------------------- 3.2 TESTED ENVIRONMENT --------------------------------------------------------------------------- 3.3 TEST MODE -------------------------------------------------------------------------------------------- 3.4 AUXILIARY EQUIPMENT --------------------------------------------------------------------------- - 3.5 EMI SUPPRESSION DEVICE(S)/MODIFICATION ---------------------------------------------- 4. TEST REPORT ----------------------------------------------------------------------------------------------- 4.1 SUMMARY OF TESTS -------------------------------------------------------------------------------- - 4.2 TRANSMITTER REQUIREMENTS ------------------------------------------------------------------ 4.2.1 6 dB BANDWIDTH -------------------------------------------------------------------------------- 4.2.2 PEAK OUTPUT POWER ------------------------------------------------------------------------- 4.2.3 OUT OF BAND EMISSIONS / BAND EDGE ------------------------------------------------ 4.2.4 OUT OF BAND EMISSION – RADIATED --------------------------------------------------- - 4.2.5 TRANSMITTER POWER SPECTRAL DENSITY ------------------------------------------- 4.2.6 AC CONDUCTED EMISSIONS ----------------------------------------------------------------- 4.2.7 ANTENNA REQUIREMENTS ------------------------------------------------------------------ APPENDIX TEST EQUIPMENT FOR TESTS --------------------------------------------------------- - 3 4 4 4 5 5 5 5 5 5 6 6 7 7 12 19 44 61 66 71 72 DEMC#DR50111002Y TRF-RF-201(01)100216 Page 3 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. 1. General information This report contains the result of tests performed by: DIGITAL EMC CO., LTD. Address: 683-3, Yubang-Dong, Yongin-Si, Kyunggi-Do, Korea. 449-080 http://www.digitalemc.com E-mail: [email protected] Tel: +82-31-321-2664 Fax: +82-31-321-1664 Quality control in the testing laboratory is implemented as per ISO/IEC 17025 which is the “General requirements for the competent of calibration and testing laboratory”. Tested by: Engineer February 18, 2010 D.C. Cha Date Name Signature Witnessed by: Engineer February 18, 2010 S.K. RYU Date Name Signature Reviewed by: Manager February 18, 2010 W. J . L e e Date Name Signature Applicant: Company name : WIZNET Co, LTD. Address : 4F Humax Village, 11-4 Sunae-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-825, Korea Date of order : August 26, 2009 DEMC#DR50111002Y TRF-RF-201(01)100216 Page 4 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. 2. Equipment information XR2WIZ6000 2.1 Equipment information Equipment model no. WIZ6000 Equipment serial no. Identical prototype Type of equipment Serial to Wireless LAN Device Server Frequency band 2412 ~ 2462 MHz Type of Modulation 802.11b – CCK 802.11g – OFDM Power AC 120V 60Hz Type of antenna Internal Type: External Type: Dipole antenna 2.2 Ancillary equipment Equipment Model No. Serial No. Manufacturer Note Adaptor DP-05020DG DE28001718 GREEN POWER - - - - - - DEMC#DR50111002Y TRF-RF-201(01)100216 Page 5 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. 3. Information about test items XR2WIZ6000 3.1 Tested frequency Frequency TX RX Lowest frequency 2412MHz 2412MHz Middle frequency 2437MHz 2437MHz Highest frequency 2462MHz 2462MHz 3.2 Tested environment Temperature : 21 ~ 23 ( o C) Relative humidity content : 35 ~ 50 % R.H. Details of power supply : AC 120V 60Hz 3.3 Test mode Test Case 1 - Test Case 2 - Test Case 3 - 3.4 Auxiliary equipment Equipment Model No. Serial No. Manufacturer Note Mouse MOC5UO IO201LWF DELL DoC Keyboard SK-8115 N/A DELL DoC Monitor 6135-AB1 N/A LENOVO DoC Computer DM-V60 740W97A600253RSAMSUNG DoC Printer SRP-770 SRP77008060035 BIXOLON DoC 3.5 EMI Suppression Device(s)/Modifications EMI suppression device(s) added and/or modifications made during testing → None DEMC#DR50111002Y TRF-RF-201(01)100216 Page 6 of 74 Copyright ○ c 2010, DIGITAL EMC Co., Ltd. 4. Test Report 4.1 Summary of tests FCC Part Section(s) Parameter Limit (Using in 2400 ~ 2483.5MHz) Test Condition Status Note 1 I. Test Items 15.247(a)(2) 6 dB Bandwidth > 500 kHz Conducted C 15.247(b)(3) Transmitter Output Power…

Text truncated - open the document above for the full version.

FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 1 FCC ID: XR2WIZ6000 Copyright Ⓒ 2010, DIGITAL EMC Co., Ltd. View 2