XS5-H23437HPCAP H2 34T/37T F-AC-F1, CAP H2 34T/37T F-DC-F1

Andrew Wireless Systems GmbH, Industriering 10, D-86675 Buchdorf Geschäftsführer: Craig Lampo, Lance D‘Amico Telefon: +49 9099 69-0, Internet: www.andrew.com Amtsgericht Augsburg, HRB No: 949, German Tax-No: 152/121/50468, VAT: DE127491606 ANDREW, an Amphenol company Andrew Wireless Systems GmbH Industriering 10 D-86675 Buchdorf Tel: +49 9099 69-0 andrew.com March 16th, 2026 Label Layout and Location FCC ID: XS5-H23437HP Product Name: CAP H2 34T/37T Label 7829482-00 Or 65mm 50mm 65mm 50mm Label 7677269-06 Sincerely, Alexander Kopp Senior Staff Engineer Compliance Industriering 10 86675 Buchdorf, Germany 65mm 35mm

Annex A_EUT & Test Setup photos Page 1 of 6 00036 Setup photos REP155885 REP156252 REP156253 Date of issue: March 20, 2026 Applicant: Andrew Wireless Systems GmbH Industriering, 10 86675 Buchdorf – Germany Product name: Industrial Booster Model: CAP H2 34T/37T F-AC-F1 FCC ID: XS5-H23437HP Annex A_EUT & Test Setup photos Page 2 of 6 00036 Section 1. Setup photos Figure-1: Antenna port testing set-up Annex A_EUT & Test Setup photos Page 3 of 6 00036 Figure-2: Radiated emissions set-up for frequencies below 1 GHz Annex A_EUT & Test Setup photos Page 4 of 6 00036 Figure-3: Radiated emissions set-up for frequencies above 1 GHz Annex A_EUT & Test Setup photos Page 5 of 6 00036 Section 2. External photos Annex A_EUT & Test Setup photos Page 6 of 6 00036 End of the test report

This test report shall not be partially reproduced without the prior written consent of Nemko S.p.A. The phase of sampling of equipment under test is carried out by the customer. Results indicated in this report refer exclusively to the tested samples and apply to the sample as received. Doc. No. TRF002 Rev. 1 Date 2025-04-04 00036 Test Report REP155885 Date of issue: March 20, 2026 Applicant: Andrew Wireless Systems GmbH Industriering, 10 86675 Buchdorf – Germany Product: Industrial Booster Model: CAP H2 34T/37T F-AC-F1 FCC ID: XS5-H23437HP Specifications:  FCC 47 CFR Part 27 Miscellaneous Wireless Communications Services Report reference ID: REP155885 Page 3 of 127 00036 Lab locations Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number FCC: 682159 Tested by P. Barbieri Test engineer signature Reviewed by R. Giampaglia Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko S.p.A. ISO/IEC 17025 accreditation. Copyright notification Nemko S.p.A. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko S.p.A. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Firmato digitalmente da Barbieri Paolo Roberto Giampaglia Report reference ID: REP155885 Page 4 of 127 00036 Table of Contents Table of Contents ......................................................................................................................................................................................................... 4 Report summary ................................................................................................................................................................................. 5 1.1 Applicant and manufacturer ..................................................................................................................................................................................... 5 1.2 Test specifications .................................................................................................................................................................................................... 5 1.3 Test methods ............................................................................................................................................................................................................ 5 1.4 Statement of compliance .......................................................................................................................................................................................... 5 1.5 Exclusions ................................................................................................................................................................................................................. 5 1.6 Test report revision history....................................................................................................................................................................................... 5 Summary of test results ...................................................................................................................................................................... 6 2.1 Testing location ........................................................................................................................................................................................................ 6 2.2 Testing period ........................................................................................................................................................................................................... 6 2.3 Sample information .................................................................................................................................................................................................. 6 2.4 FCC Part 27 test requirements results ...................................................................................................................................................................... 6 Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 Sample information .................................................................................................................................................................................................. 7 3.2 EUT information ....................................................................................................................................................................................................... 7 3.3 Technical information ............................................................................................................................................................................................... 7 3.4 Product description and theory of operation ........................................................................................................................................................... 8 3.5 EUT exercise details .........................................................................................................…

Text truncated - open the document above for the full version.

The test results relate only to the tested item. The sample has been provided by the client. Without the written consent of Bureau Veritas Consumer Products Services Germany GmbH excerpts of this report shall not be reproduced. Bureau Veritas Consumer Products Services Germany GmbH www.bureauveritas.de/cps Phone: +49 (0)40 – 740 41 – 0 Schwerin Mettenheimer Straße 12-14, 19061 Schwerin [email protected] Tuerkheim Businesspark A96, 86842 Tuerkheim [email protected] Managing Director: Jörg-Timm Kilisch VAT-No.: DE164793120 Reg.No.: Schwerin HRB 3564 Hamburg Oehleckerring 40, 22419 Hamburg [email protected] Nuremberg Thurn-und-Taxis-Str. 18, 90411 Nuremberg [email protected] RPRT-00XX-NU-V01 / TEMP-00XX-DEU-V01 Page 1 of 9 RF Exposure Assessment Report Reference: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 on Commscope Inc. ERA CAP H2 34T/37T F-AC-F1 Medium Power Carrier Access Point FCC ID: XS5-H23437 according to: OET Bulletin 65 Edition 97-01: August 1997 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Signature: Date of issue: 21.02.2025 Technical Reviewer: Version: 02 Report Reviewer: TEST REPORT REFERENCE: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 Page 2 of 9 Contents 1 Summary .................................................................................................................... 3 2 Administrative Data...................................................................................................... 4 2.1 Testing Laboratory ............................................................................................... 4 2.2 Applicant Data ..................................................................................................... 4 2.3 Manufacturer Data ............................................................................................... 4 2.4 Versions Management ........................................................................................... 4 3 Test object Data .......................................................................................................... 5 4 Assessment ................................................................................................................. 6 4.1 Assessment method and subject of assessment ....................................................... 6 4.2 Exposure limits .................................................................................................... 7 4.3 Formulas used for calculation ................................................................................ 7 4.4 Calculation .......................................................................................................... 8 TEST REPORT REFERENCE: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 Page 3 of 9 1 Summary The RF-exposure assessment according to OET Bulletin 65 Edition 97-01: August 1997 shows, that the worst-case RF exposure values of the assessed radio technologies and bands are below the Limits for General Population/Uncontrolled Exposure: • Table 1 (B) of OET Bulletin 65 • Table 1 (II) to § 1.1310(E)(1) of 47 CFR Ch. I (10–1–21 Edition). COMMENTS: • Assessment limited to supported North American frequency bands • Prediction distance R = 356 cm TEST REPORT REFERENCE: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 Page 4 of 9 2 Administrative Data 2.1 Testing Laboratory Company Name: Bureau Veritas Consumer Products Services Germany GmbH Address: Thurn-und-Taxis-Straße 18 90411 Nürnberg Germany 2.2 Applicant Data Company Name: CommScope Andrew Wireless Systems GmbH Address: Industriering 10 86675 Buchdorf Germany Contact Person: Mr. Jiri Cecka 2.3 Manufacturer Data Company Name: CommScope Andrew Wireless Systems GmbH Address: Industriering 10 86675 Buchdorf Germany Contact Person: Mr. Jiri Cecka 2.4 Versions Management V 01.00 Initial release. V 02.00 Correction of redactional changes. TEST REPORT REFERENCE: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 Page 5 of 9 3 Test object Data Declared EUT data by the supplier Kind of Device product description The ERA product is a digital distribution system with focus on flexibility, easy installing, commissioning, and reliable operation. The system is designed in a way to satisfy all of today’s needs as well as unknown future standards and requirements. The ERA system comprises of two main parts. A base station interface (Master or Head End Unit) that takes RF signals as well as digital signals from the base stations, conditions the signals for the given application and assigns them to the coverage zones. The coverage side is built of one or more Remote Units. The “Remote Unit” (hereinafter referred to as “RU”) is connected via a 10GBASE SFP+ fiber optical link to the ERA Master Unit. This link gives a total RF bandwidth of up to 320 MHz. For higher bandwidth requirements up to 640 MHz, a secondary 10G link can be used in parallel. RF signals between Master Unit and Remote Units are sent digitally over the fiber optical link. At the receiver side these signals are converted back to analog and amplified up to appropriate transmit levels. Product name High Power Carrier Access Point Type ERA CAP H2 34T/37T F-AC-F1 Hardware version 7857017-0001 Rev: 00 Software version 1.10.0.180007 Integrated transmitter High Power Carrier Access Point supported Radio technologies TDD 34 and TDD 37; 5G n77 Antenna None. Supplied document(s) - TEST REPORT REFERENCE: 2024-0349-MPE-TR-24-0196-V02 and 2024-0349-MPE-TR-24-0197-V02 Page 6 of 9 4 Assessment 4.1 Assessment method and subject of assessment Calculation of power density and comparison with reference levels for general public exposure. Applicability area and limitations: Power density can be calculated in far field region. Applied Standards: • IEEE Std C95.3-2021, D.4.2 Antennas – Main beam on-axis, general method for determini…

Text truncated - open the document above for the full version.

The test results relates only to the tested item. The sample has been provided by the client. Without the written consent of Burau Veritas Consumer Products Services Germany GmbH excerpts of this report shall not be reproduced. Bureau Veritas Consumer Products Services Germany GmbH www.bureauveritas.de/cps Tel.: +49 (0)40 – 740 41 – 0 Schwerin Mettenheimer Straße 12-14, 19061 Schwerin [email protected] Tuerkheim Businesspark A96, 86842 Tuerkheim [email protected] Managing Director: Jörg-Timm Kilisch VAT-No.: DE164793120 Reg.No.: Schwerin HRB 3564 Hamburg Oehleckerring 40, 22419 Hamburg [email protected] Nuremberg Thurn-und-Taxis-Str. 18, 90411 Nuremberg [email protected] RPRT-0024-NU-V04 / TEMP-0059-NU-V02 Page 1 of 86 Test report 2024-0349-EMC-TR-24-0196-V02 Designation: CAP H2 34T/37T F-AC-F1 [34T] Manufacturer: CommScope Serial No(s): BGH2AA2434005 ID No. 7857017-0001 Rev: 00 FCC ID XS5-H23437 Test Specification(s): ANSI 63.26:2015 FCC Rules and Regulations as listed in 47 CFR, Part 20 and Part 27:2024-10-28 Test Plan: "BU-PC-2336-10 FCC CAP H2 34T37T" from customer. Test Result: Passed BNetzA-CAB-19/21-20 Date of issue: 2025-02-25 Signature: Version: 02 Technical Reviewer: Date of delivery: 2024-10-28 Performance date: 2024-12-02 – Report Reviewer: 2024-12-11 EMC Test Report No.: 24-0196 EMC tests on CAP H2 34T/37T F-AC-F1 [34T] The test results relate only to the tested item. The sample has been provided by the client. Without the written consent of Bureau Veritas Consumer Products Services Germany GmbH excerpts of this report shall not be reproduced. 2024-0349-EMC-TR-24-0196-V02 RPRT-0024-NU-V04 / TEMP-0059-NU-EAW-V02 Page 2 of 86 Client: CommScope Andrew Wireless System GmbH Industriering 10 86675 Buchdorf Germany Test laboratory: Bureau Veritas Consumer Products Services Germany GmbH Thurn-und-Taxis-Straße 18 D-90411 Nürnberg Tel.: +49 40 74041 0 Test location: Bureau Veritas Consumer Products Services Germany GmbH Thurn-und-Taxis-Straße 18 D-90411 Nürnberg Laboratory accreditation no: DAkkS D-PL-12024-06-04 BNETZA-CAB-19/21-20 FCC Designation Number: DE0023 FCC Test Firm Registration: 366481 Versions management: V 01.00 Initial release V 02.00 Supplement of used antenna ports at measurements and editorial changes. EMC Test Report No.: 24-0196 EMC tests on CAP H2 34T/37T F-AC-F1 [34T] The test results relate only to the tested item. The sample has been provided by the client. Without the written consent of Bureau Veritas Consumer Products Services Germany GmbH excerpts of this report shall not be reproduced. 2024-0349-EMC-TR-24-0196-V02 RPRT-0024-NU-V04 / TEMP-0059-NU-EAW-V02 Page 3 of 86 Table of Contents 1 APPLIED STANDARDS AND TEST SUMMARY ......................................................................... 4 1.1 CFR APPLIED STANDARDS................................................................................................. 4 1.2 FCC REFERENCE TABLE ...................................................................................................... 5 1.3 MEASUREMENT SUMMARY ................................................................................................. 6 2 ADMINISTRATIVE DATA .............................................................................................................. 9 2.1 TESTING LABORATORY ....................................................................................................... 9 2.2 APPLICANT DATA .................................................................................................................. 9 2.3 MANUFACTURER DATA........................................................................................................ 9 3 TEST OBJECT DATA .....................................................................................................................10 3.1 GENERAL EUT DESCRIPTION ...........................................................................................10 3.2 EUT MAIN COMPONENTS ..................................................................................................11 3.3 ANCILLARY EQUIPMENT ....................................................................................................11 3.4 AUXILIARY EQUIPMENT .....................................................................................................12 3.5 EUT SETUPS ..........................................................................................................................13 3.6 OPERATING MODES ............................................................................................................14 3.7 PRODUCT LABELLING .........................................................................................................16 4 DESCRIPTION OF EMC TEST CENTRE ....................................................................................17 4.1 CLIMATIC CONDITIONS DURING MEASUREMENTS ..................................................17 4.2 CONFORMITY STATEMENT / DECISION RULE ............................................................17 4.3 MEASUREMENT UNCERTAINTY ........................................................................................18 5 TEST RESULTS...............................................................................................................................19 5.1 EFFECTIVE RADIATED POWER, MEAN OUTPUT POWER AND ZONE ENHANCE GAIN 19 5.2 PEAK TO AVERAGE RATIO ................................................................................................28 5.3 OCCUPIED BANDWIDTH / INPUT-VERSUS-OUTPUT SPECTRUM ..........................34 5.4 CONDUCTED SPURIOUS EMISSIONS AT ANTENNA TERMINALS ..........................42 5.5 OUT-OF-BAND EMISSION LIMITS ..................................................................................51 5.6 OUT-OF-BAND REJECTION ...............................................................................................61 5.7 FREQUENCY STABILITY ...........…

Text truncated - open the document above for the full version.

This test report shall not be partially reproduced without the prior written consent of Nemko S.p.A. The phase of sampling of equipment under test is carried out by the customer. Results indicated in this report refer exclusively to the tested samples and apply to the sample as received. Doc. No. TRF002 Rev. 1 Date 2025-04-04 00036 Test Report REP156253 Date of issue: March 20, 2026 Applicant: Andrew Wireless Systems GmbH Industriering, 10 86675 Buchdorf – Germany Product: Industrial Booster Model: CAP H2 34T/37T F-AC-F1 FCC ID: XS5-H23437HP Specifications:  FCC 47 CFR Part 27 Miscellaneous Wireless Communications Services Report reference ID: REP156253 Page 3 of 24 00036 Lab locations Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number FCC: 682159 Tested by P. Barbieri Test engineer signature Reviewed by R. Giampaglia Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko S.p.A. ISO/IEC 17025 accreditation. Copyright notification Nemko S.p.A. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko S.p.A. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: REP156253 Page 4 of 24 00036 Table of Contents Table of Contents ......................................................................................................................................................................................................... 4 Report summary ................................................................................................................................................................................. 5 1.1 Applicant and manufacturer ..................................................................................................................................................................................... 5 1.2 Test specifications .................................................................................................................................................................................................... 5 1.3 Test methods ............................................................................................................................................................................................................ 5 1.4 Statement of compliance .......................................................................................................................................................................................... 5 1.5 Exclusions ................................................................................................................................................................................................................. 5 1.6 Test report revision history....................................................................................................................................................................................... 5 Summary of test results ...................................................................................................................................................................... 6 2.1 Testing location ........................................................................................................................................................................................................ 6 2.2 Testing period ........................................................................................................................................................................................................... 6 2.3 Sample information .................................................................................................................................................................................................. 6 2.4 FCC Part 27 test requirements results ...................................................................................................................................................................... 6 Equipment under test (EUT) details ..................................................................................................................................................... 7 3.1 Sample information .................................................................................................................................................................................................. 7 3.2 EUT information ....................................................................................................................................................................................................... 7 3.3 Technical information ............................................................................................................................................................................................... 7 3.4 Product description and theory of operation ........................................................................................................................................................... 8 3.5 EUT exercise details .....................................................................................................................................................................…

Text truncated - open the document above for the full version.

This test report shall not be partially reproduced without the prior written consent of Nemko S.p.A. The phase of sampling of equipment under test is carried out by the customer. Results indicated in this report refer exclusively to the tested samples and apply to the sample as received. Doc. No. TRF002 Rev. 1 Date 2025-04-04 00036 Test Report REP156252 Date of issue: March 20, 2026 Applicant: Andrew Wireless Systems GmbH Industriering, 10 86675 Buchdorf – Germany Product: Industrial Booster Model: CAP H2 34T/37T F-AC-F1 FCC ID: XS5-H23437HP Specifications:  FCC 47 CFR Part 27 Miscellaneous Wireless Communications Services Report reference ID: REP156252 Page 3 of 36 00036 Lab locations Company name Nemko Spa Address Via del Carroccio, 4 City Biassono Province MB Postal code 20853 Country Italy Telephone +39 039 220 12 01 Facsimile +39 039 220 12 21 Website www.nemko.com Site number FCC: 682159 Tested by P. Barbieri Test engineer signature Reviewed by R. Giampaglia Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko S.p.A. ISO/IEC 17025 accreditation. Copyright notification Nemko S.p.A. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko S.p.A. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: REP156252 Page 4 of 36 00036 Table of Contents Table of Contents ......................................................................................................................................................................................................... 4 Report summary ................................................................................................................................................................................. 5 1.1 Applicant and manufacturer ..................................................................................................................................................................................... 5 1.2 Test specifications .................................................................................................................................................................................................... 5 1.3 Test methods ............................................................................................................................................................................................................ 5 1.4 Statement of compliance .......................................................................................................................................................................................... 5 1.5 Exclusions ................................................................................................................................................................................................................. 5 1.6 Test report revision history....................................................................................................................................................................................... 5 Summary of test results ...................................................................................................................................................................... 6 2.1 Testing location ........................................................................................................................................................................................................ 6 2.2 Testing period ........................................................................................................................................................................................................... 6 2.3 Sample information .................................................................................................................................................................................................. 6 2.4 FCC Part 27 test requirements results ...............…

Text truncated - open the document above for the full version.