XTE-TRN-2012Meter Communication Module

On-Ramp Wireless Confidential and Proprietary. This document is not to be used, disclosed, or distributed to anyone without express written consent from On-Ramp Wireless. The recipient of this document shall respect the security of this document and maintain the confidentiality of the information it contains. The master copy of this document is stored in electronic format, therefore any hard or soft copy used for distribution purposes must be considered as uncontrolled. Reference should be made to On-Ramp Wireless to obtain the latest revision. TRN-2012/TRN-2113 Integration Specification On-Ramp Wireless Incorporated 10920 Via Frontera, Suite 200 San Diego, CA 92127 U.S.A. Copyright © 2013 On-Ramp Wireless Incorporated. All Rights Reserved. The information disclosed in this document is proprietary to On-Ramp Wireless Inc., and is not to be used or disclosed to unauthorized persons without the written consent of On-Ramp Wireless. The recipient of this document shall respect the security of this document and maintain the confidentiality of the information it contains. The master copy of this document is stored in electronic format, therefore any hard or soft copy used for distribution purposes must be considered as uncontrolled. Reference should be made to On-Ramp Wireless to obtain the latest version. By accepting this material the recipient agrees that this material and the information contained therein is to be held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of On-Ramp Wireless Incorporated. On-Ramp Wireless Incorporated reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed for any damages arising directly or indirectly by their use or application. The information provided in this document is provided on an “as is” basis. This document contains On-Ramp Wireless proprietary information and must be shredded when discarded. This documentation and the software described in it are copyrighted with all rights reserved. This documentation and the software may not be copied, except as otherwise provided in your software license or as expressly permitted in writing by On-Ramp Wireless, Incorporated. Any sample code herein is provided for your convenience and has not been tested or designed to work on any particular system configuration. It is provided “AS IS” and your use of this sample code, whether as provided or with any modification, is at your own risk. On-Ramp Wireless undertakes no liability or responsibility with respect to the sample code, and disclaims all warranties, express and implied, including without limitation warranties on merchantability, fitness for a specified purpose, and infringement. On-Ramp Wireless reserves all rights in the sample code, and permits use of this sample code only for educational and reference purposes. This technology and technical data may be subject to U.S. and international export, re-export or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Random Phase Multiple Access™ is a trademark of On-Ramp Wireless Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. TRN-2012 / TRN-2113 Integration Specification 014-0047-00 Rev. C May 13, 2013 On-Ramp Wireless Confidential and Proprietary iii 014-0047-00 Rev. C Contents 1 Overview ................................................................................................................ 1 1.1 On-Ramp Wireless Total Reach Network .................................................................................. 1 1.2 Model Numbers .......................................................................................................................... 2 1.3 Referenced Documents ............................................................................................................. 2 2 DC and RF Characteristics ................................................................................... 3 2.1 Absolute Maximum Ratings ....................................................................................................... 3 2.2 Recommended Operating Conditions ........................................................................................ 3 2.3 Operating Characteristics for all Models .................................................................................... 3 2.4 Power Supplies .......................................................................................................................... 4 3 Electrical Interface ................................................................................................ 5 3.1 Signal Connectors ...................................................................................................................... 5 3.2 Pin and Signal Descriptions ....................................................................................................... 7 3.2.1 Main signal connector ....................................................................................................... 7 3.2.2 RF Connectors ................................................................................................................. 7 3.3 Environmental ............................................................................................................................ 7 3.3.1 ESD .................................................................................................................................. 7 3.3.2 Harsh Environments ......................................................................................................... 8 4 Safety Considerations .......................................................................................... 9 5 Regulatory Considerations .....................................................…

Text truncated - open the document above for the full version.

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com April 12, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attention: Reviewing Agency or TCB ID: XTE-TRN-2012 On behalf of On-Ramp Wireless, Inc., I certify that the submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC regulations, will have affixed to it a label identical to that submitted for approval with this application. Dated this _____12th______day of __April___, 2013. Robert Boesel VP Engineering, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8361, Fax: 858-592-6009 [email protected]

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com April 12, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attention: Director of Certification RE: Authority to Act as Agent FCC ID: XTE-TRN-2012 Dear Sir or Madam, We, at On-Ramp Wireless, Inc., 10920 Via Frontera, Ste. 200, San Diego, CA 92127, hereby authorize Ferdinand S. Custodio, at TÜV SÜD America Inc., 10040 Mesa Rim Road, San Diego, CA 92121, Tel. 858-678-1400, to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on January 31, 2015. Sincerely, Robert Boesel VP Engineering, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8361, Fax: 858-592-6009 [email protected]

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com On-Ramp Wireless, Inc. 1 April 12, 2013 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Single Modular Approval On-Ramp Wireless, Inc. FCC ID: XTE-TRN-2012 FCC Part 15 Certification Dear Application Examiner , On-Ramp Wireless, Inc. module FCC ID: XTE-TRN-2012 is seeking FCC authorization as a Single Modular transmitter. The requirements of the FCC Part 15.212 are met for all requirements listed below with the exceptions indicated. 1. The modular transmitter must have its own RF shielding The radio portion of this module has its own RF shielding. Please see the photos provided with the application. 2. The modular transmitter must have buffered modulation/data inputs The module has a memory management unit inside and buffers the data inputs from UART. 3. The modular transmitter must have its own power supply regulation The module contains its own voltage regulation. In case of changes in the supply voltage VCC (for example caused by temperature changes or other effects), the internal voltage will be stabilized. 5. The modular transmitter must be tested in a stand-alone configuration The module was tested in a stand-alone configuration and was inside a plastic housing used for form and fit . Please see the test report provided with this application. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Please see the label provided with this application. That label will be affixed to all modules. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The module is compliant with all applicable FCC rules. Detailed instructions are provided in the product document entitled TRN-2012/TRN-2113 Integration Specification (014-0047-00). 8. The modular transmitter must comply with any applicable RF exposure requirements. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This module is approved for use in products operating as a fixed transmitting device. On-Ramp Wireless, Inc. 2 Kind Regards, Robert Boesel VP Engineering, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8361, Fax: 858-592-6009 [email protected]

April 12, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attention: Reviewing Agency or TCB ID: XTE-TRN-2012 On behalf of On-Ramp Wireless, Inc., ZigBee wireless modem option. The ZigB also certify that in the event On-Ramp W Wireless will recertify the product, as defined in the FCC Dated this _____12th______day of __ Robert Boesel VP Engineering, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8361, Fax: 858-592 [email protected]:[email protected] On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com Reviewing Agency or TCB Ramp Wireless, Inc., I certify that On-Ramp Wireless model TRN-2012 has been tested without wireless modem option. The ZigBee population option is not currently being manufactured Ramp Wireless decides to make the ZigBee option an available product, On , as defined in the FCC regulations. ______day of __April___, 2013. Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 592-6009 mailto:[email protected] Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com 2012 has been tested without the ee population option is not currently being manufactured for release. I ee option an available product, On-Ramp

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com April 12, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD RE: Authority to Act as On-Ramp Wireless Agent/Main Contact FCC ID: XTE-TRN-2012 Dear Sir or Madam, I, Jason R. Wilson, at On-Ramp Wireless, Inc., 10920 Via Frontera, Ste. 200, San Diego, CA 92127, hereby authorize Robert W. Boesel, at On-Ramp Wireless, Inc., 10920 Via Frontera, Ste. 200, San Diego, CA 92127, Tel. 858-312- 8361, to act as On-Ramp Wireless’ agent/main contact in all matters relating to applications for equipment authorization and certification, including the signing of all documents relating to these matters. There is no expiration for this authorization. Sincerely, Jason Wilson VP Product Management, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8356, Fax: 858-592-6009 [email protected]

April 12, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attn: Director of Certification RE: Confidentiality Request FCC ID: XTE-TRN-2012 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, permanent confidential treatment of information accompanying this application as outlined below: • Schematics • Bill of Materials/Parts List and P • Block Diagrams • Operational Description On-Ramp Wireless, Inc. also hereby requests short application as outlined below for a period • Internal Photos • External Photos • User Manual • Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to its competitors. On-Ramp Wireless, Inc. understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Robert Boesel VP Engineering, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8361, Fax: 858-592 [email protected]:[email protected] On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com Director of Certification Confidentiality Request Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, On-Ramp Wireless, Inc. permanent confidential treatment of information accompanying this application as outlined below: and Placement also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period until November 30, 2013. The above materials contain trade secrets and proprietary information not customarily released to the public. The matters might be harmful to On-Ramp Wireless, Inc. and provide unjustif understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 592-6009 mailto:[email protected] Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com Ramp Wireless, Inc. hereby requests permanent confidential treatment of information accompanying this application as outlined below: term confidential treatment of information accompanying this The above materials contain trade secrets and proprietary information not customarily released to the public. The and provide unjustified benefits to understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application.

© BABT 2011 BABT 736 Issue 13 Page 1 of 6 BABT is the Telecommunications Certification body of TÜV SÜD Application for Equipment Authorisation by BABT operating as a US TCB for Licensed and Unlicensed Radio Devices and Unintentional Radiators Introduction This application form should normally be used for applications for evaluation and filing by BABT as a TCB. It replaces FCC form 731 where applications are made through BABT. The form consists of a number of individual sections, which should be completed as appropriate. Note: BABT will accept applications using FCC Form 731 but will still require section F of this form to be completed Section A: Main Contact Details (FCC Items, 1, 2 and 4) A. 1 Main Contact Detail Please write here the company name, and contact details to be used in the progression of the application. Name of the main contact: (This person must be within the certificate holders organisational structure and must not be a consultant Title: VP Engineering First Name: Robert Last Name: Boesel Job Title and/or Department Reference: Company Name: On-Ramp Wireless, Inc. Address: 10920 Via Frontera, Suite 200, San Diego, CA Postcode/Zip Code: 92127 Country: USA Telephone Number: 858-312-8361 Fax Number: 858-592-6009 Email Address: rob.boesel@onrampwireless. com A. 2 Other Contact Information Please complete this section as appropriate. Normally all contact is directed through the applicant. If you wish to involve others for particular roles please indicate below, and provide supporting information. Where the Main contact is not the grantee or you wish an agent to be involved with this application please check/tick this box and supply an agents letter on company headed signed by the Grantee appointing them. https://gullfoss2.fcc.gov/oetcf/eas/reports/GranteeSearch.cfm) Where you wish to name a different person to the grantee as either technical contact or non-technical contact please check/tick this box and the contact details with the application Note: This may be either a letter or part of an e-mail. Section B: Your Grant Requirements B. 1 Type of Application Original Class 2 Permissive Change Change of FCC ID Other (provide details in a letter) Note: Class 1 Permissive Changes are made under the manufacturers responsibility and should not be submitted to BABT B. 2 Grant Type Please complete these as appropriate. Radio Modules Is the equipment in this application a radio module intended for use in other products Yes No If yes is the module limited to use with a host (or hosts) listed on the grant Yes No Where you only intend using listed host/hosts please list the hosts (with their FCC ids where appropriate) Host: Note: Please indicate where an application for a grant for a listed host is in progress or has not yet been submitted Please indicate modular type applied for Single Modular © BABT 2011 BABT 736 Issue 13 Page 2 of 6 BABT is the Telecommunications Certification body of TÜV SÜD B. 3 Hearing Aid Compatibility Portable Equipment subject to Parts 22E, 24H or Part 90S may optionally be assessed for Hearing Aid compatibility Do you wish BABT to assess the RF Emissions for interference to Hearing Aids? Yes No Do you wish BABT to assess the T-Coil signal for compatibility for Hearing Aids? Yes No If your equipment has any special features to support the Hearing Aid compatibility please provide brief details: Details: B. 4 Additional Information (FCC Items 8 and 9) Confidentiality: Do you request any portion of the data contained in this application to to be treated with confidentiality pursuant to 47 CFR 0.459 of the FCC rules? Yes No Deferred Grant Do you wish BABT to defer uploading the grant until a specified date pursuant to 47 CFR 0.459 of the FCC rules? Yes No If “YES” please indicate the earliest date you wish the grant to be uploaded: Date B. 5 Ongoing Surveillance Please indicate which ongoing surveillance option you wish to use: Manufacture in a BABT Certified Manufacturing location (e.g. in a location with a PQC, FQA, or ISO 9001 certificate from BABT). Where this option is taken please indicate the Location and Certificate number of your manufacturing location Location Certificate Number Under the TCB market surveillance route Section C: Product Details C. 1 Product(s) Submitted Please enter the Product name(s), and model(s) of each product. Product(s) Name Model(s) Falcon TRN-2012 C. 2 Brief Description of this Product (FCC Item 10) Please give a brief summary of the Product for the Grant line followed by details of the purpose and type of the product. This is intended to assist in correlating the product to the requested certification. The TRN-2012 Radio Communication module is designed specifically to be installed in an electric meter to provide half- duplex communication to the back office. The module communicates with the meters through a UART interface. The module uses two integral diversity antennas to transmit or receive information wirelessly to one or more remote Access Points. C. 3 FRN (FCC Main Form) Please complete one of the following relating to FRN (10-digit unique identifying FCC Registration Number): The application is made under the following FRN 0019103472 I have no FRN and hereby authorise BABT to apply for one on my behalf C. 4 FCC ID [Grantee Code (FCC Main Form) and Equipment Product Code (FCC Item 3)] If you have a grantee code please detail the FCC ID to be used for this grant: Grantee Code (3 chars) Equipment Product Code (up to 14 characters, show zeros as Ø, no spaces) XTE -TRN-2012 If you do not have a grantee code and wish BABT to obtain one please complete the following: The following is my preferred FCC id: (Please check on FCC website to see if already used) The Equipment Product code I intend to use with this product is as follows: (up to 14 characters, show zeros as Ø, no spaces) © BABT 2011 BABT 736 Issue 13 Page 3 of 6 BABT is the Telecommunications Certification body of TÜV SÜD Note: BABT will not be able to complete the evalu…

Text truncated - open the document above for the full version.

TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 May 23, 2013 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attention: Director of Certification RE: Prediction of MPE limit at a given distance as per KDB 447498 D01 Mobile Portable RF Exposure V05 FCC ID: XTE-TRN-2012 Equation from page 18 of OET Bulletin 65, Edition 97-01 where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to isotropic R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 19.66 (dBm) Maximum peak output power at antenna input terminal: 92.47 (mW) Antenna gain (typical): 2.1 (dBi) Maximum antenna gain: 1.622 (numeric) Prediction distance: 20 (cm) Source Based Time Average Duty Cycle: 100 (%) Prediction frequency: 2402.00 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1.000 (mW/cm2) Power density at prediction frequency: 0.0298 (mW/cm2) Power density at prediction frequency: 0.298 (W/m2) Margin of Compliance: -15.25 (dB) Sincerely, Ferdie S. Custodio Name Authorized Signatory Title: EMC/Wireless Test Engineer

Report No. SC1303244 May 2013 America Report On Application for Grant of Equipment Authorization of the OnRamp Wireless Falcon TRN-2012 and TRN-2113 RF Board FCC Part 15 Subpart C §15.247 TÜV SÜD America Inc., 10040 Mesa Rim Road, San Diego, CA 92121 Tel: (858) 678-1400. Website: www.TUVamerica.com Page 2 of 61 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 REPORT ON TEST REPORT NUMBER PREPARED FOR Radio Testing of the OnRamp Wireless RF Board SC1303244 OnRamp Wireless 10920 Via Frontera San Diego, CA 92127 CONTACT PERSON Alain Charles Hardware Engineer (858) 592-6008 [email protected] PREPARED BY Ferdinand S. Custodio Name Authorized Signatory Title: EMC/Wireless Test Engineer APPROVED BY Chip R. Fleury Name Authorized Signatory DATED May 23, 2013 TÜV SÜD America Inc., 10040 Mesa Rim Road, San Diego, CA 92121 Tel: (858) 678-1400. Website: www.TUVamerica.com Page 3 of 61 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 Revision History SC1303244 OnRamp Wireless Falcon RF Board DATE OLD REVISION NEW REVISION REASON PAGES AFFECTED APPROVED BY 05/23/13 Initial Release Ferdinand Custodio FCC ID (TRN-2012): XTE-TRN-2012 FCC ID (TRN-2113): XTE-TRN-2113 Report No. SC1303244 Page 4 of 61 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 CONTENTS Section Page No 1 REPORT SUMMARY ............................................................................................................................... 5 1.1 Introduction ................................................................................................................................................ 6 1.2 Brief Summary Of Results ........................................................................................................................... 7 1.3 Product Information ................................................................................................................................... 8 1.4 EUT Test Configuration ............................................................................................................................. 11 1.5 Deviations From The Standard ................................................................................................................. 13 1.6 Modification Record ................................................................................................................................. 13 1.7 Test Methodology ..................................................................................................................................... 13 1.8 Test Facility ............................................................................................................................................... 13 2 TEST DETAILS ...................................................................................................................................... 14 2.1 Peak Output Power ................................................................................................................................... 15 2.2 Conducted Emissions ................................................................................................................................ 19 2.3 Minimum 6 dB Rf Bandwidth .................................................................................................................... 23 2.4 Out-Of-Band Emissions - Conducted ........................................................................................................ 26 2.5 Band-Edge Compliance Of RF Conducted Emissions ................................................................................ 33 2.6 Spurious Radiated Emissions .................................................................................................................... 35 2.7 Power Spectral Density ............................................................................................................................. 50 3 TEST EQUIPMENT USED ...................................................................................................................... 53 3.1 Test Equipment Used ................................................................................................................................ 54 3.2 Measurement Uncertainty ....................................................................................................................... 55 4 DIAGRAM OF TEST SETUP ................................................................................................................... 56 4.1 Test Setup Diagram ................................................................................................................................... 57 5 ACCREDITATION, DISCLAIMERS AND COPYRIGHT ............................................................................... 60 5.1 Accreditation, Disclaimers and Copyright ................................................................................................. 61 FCC ID (TRN-2012): XTE-TRN-2012 FCC ID (TRN-2113): XTE-TRN-2113 Report No. SC1303244 Page 5 of 61 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 SECTION 1 REPORT SUMMARY Radio Testing of the OnRamp Wireless RF Board FCC ID (TRN-2012): XTE-TRN-2012 FCC ID (TRN-2113): XTE-TRN-2113 Report No. SC1303244 Page 6 of 61 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121-2912 Phone: 858 678 1400 FAX: 858 546 0364 1.1 INTRODUCTION The information contained in this report is intended to show verification of the OnRamp Wireless RF Board to the requirements of FCC Part 15 Subpart C §15.247 and IC RSS-Gen and RSS-210 Issue 8 December 2010. Objective To perform Radio Testing to determine the Equipment Under Test's (EUT’s) compliance with the Test Specification, for the series of tests carried out. Manufacturer OnRamp Wireless Model Name Falcon Mod…

Text truncated - open the document above for the full version.

FCC ID XTE-TRN-2012 FCC ID XTE-TRN-2113 Conducted Port Test Setup Conducted Emissions Test Setup Radiated Emissions Test Setup Radiated Emissions Test Setup Radiated Emissions Test Setup Radiated Emissions Test Setup