XTE-ULPAP210Sectorized RPMA Access Point

TOTAL REACH NETWORK On-Ramp Wireless Confidential and Proprietary. This document is not to be used, disclosed, or distributed to anyone without express written consent from On-Ramp Wireless. The recipient of this document shall respect the security of this document and maintain the confidentiality of the information it contains. The master copy of this document is stored in electronic format, therefore any hard or soft copy used for distribution purposes must be considered as uncontrolled. Reference should be made to On-Ramp Wireless to obtain the latest revision. Access Point Deployment Guide Model TRN-1000 System Release 1.4 On-Ramp Wireless Incorporated 10920 Via Frontera, Suite 200 San Diego, CA 92127 U.S.A. Copyright © 2015 On-Ramp Wireless Incorporated. All Rights Reserved. The information disclosed in this document is proprietary to On-Ramp Wireless Inc., and is not to be used or disclosed to unauthorized persons without the written consent of On-Ramp Wireless. The recipient of this document shall respect the security of this document and maintain the confidentiality of the information it contains. The master copy of this document is stored in electronic format, therefore any hard or soft copy used for distribution purposes must be considered as uncontrolled. Reference should be made to On-Ramp Wireless to obtain the latest version. By accepting this material the recipient agrees that this material and the information contained therein is to be held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of On-Ramp Wireless Incorporated. On-Ramp Wireless Incorporated reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed for any damages arising directly or indirectly by their use or application. The information provided in this document is provided on an “as is” basis. This document contains On-Ramp Wireless proprietary information and must be shredded when discarded. This documentation and the software described in it are copyrighted with all rights reserved. This documentation and the software may not be copied, except as otherwise provided in your software license or as expressly permitted in writing by On-Ramp Wireless, Incorporated. Any sample code herein is provided for your convenience and has not been tested or designed to work on any particular system configuration. It is provided “AS IS” and your use of this sample code, whether as provided or with any modification, is at your own risk. On-Ramp Wireless undertakes no liability or responsibility with respect to the sample code, and disclaims all warranties, express and implied, including without limitation warranties on merchantability, fitness for a specified purpose, and infringement. On-Ramp Wireless reserves all rights in the sample code, and permits use of this sample code only for educational and reference purposes. This technology and technical data may be subject to U.S. and international export, re-export or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Random Phase Multiple Access™ is a trademark of On-Ramp Wireless Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. AP Deployment Guide - System Release 1.4 010-0006-00 Rev. F February 3, 2015 On-Ramp Wireless Incorporated iii 010-0006-00 Rev. F Contents 1 Introduction ........................................................................................................... 1 1.1 Overview .................................................................................................................................... 1 1.2 Referenced Documents ............................................................................................................. 3 2 Network Planning and Configuration Considerations ....................................... 4 2.1 Network Planning ....................................................................................................................... 4 2.2 Network Configuration ............................................................................................................... 4 2.3 Backhaul .................................................................................................................................... 5 3 Installation Prerequisites and Considerations ................................................... 6 3.1 Installation Prerequisites ............................................................................................................ 6 3.1.1 Site Survey ....................................................................................................................... 6 3.1.2 AP Installation Configuration ............................................................................................ 6 3.2 Installation Considerations ......................................................................................................... 7 3.2.1 AP Antenna ...................................................................................................................... 7 3.2.2 AP Antenna Cable ............................................................................................................ 7 3.2.3 GPS Antenna .................................................................................................................... 8 3.2.4 Antenna Cable Lightning Suppression and Grounding .................................................... 9 3.2.5 AP DC Power Requirement .............................................................................................. 9 3.2.6 PoE Injector .................................................................................................................... 10 3.2.7 Ethernet Cable .........................................................…

Text truncated - open the document above for the full version.

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com April 16th, 2015 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attention: Reviewing Agency or TCB RE: Sectorized AP FCC ID: XTE-ULPAP210 On behalf of On-Ramp Wireless, Inc., I certify that the Access Point (AP) can be used in two configurations, one with an omnidirectional antenna (Originally certified as FCC: XTE‐ULPAP110) and the other with a directional antenna for sectorization (FCC ID#: XTE‐ULPAP210). In both of these deployment types, the AP’s firmware and hardware are both the same. The difference between the two deployments will be the antenna difference (Omni- directional Antenna gain is =9 dBi model HG2409UDT-PRO and directional Antenna gain is = 17 dBi model HG2417P-090). Dated this _____16th______day of __April___, 2015. Jason Wilson VP Product Management, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8356, Fax: 858-592-6009 [email protected]

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com On-Ramp Wireless, Inc. 1 April 16, 2015 Letter of Authorization To Whom It May Concern: We, at On-Ramp Wireless, Inc., 10920 Via Frontera, Suite 200, San Diego, CA 92127, hereby authorize TÜV SÜD America Inc., 10040 Mesa Rim Road, San Diego, CA 92121, USA and their associates to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters on the following product:  TRN AP-1000 (FCC ID: XTE-ULPAP210) NOTE: On-Ramp Wireless, Inc. is to be named on the certificate. TUV SÜD America, Inc. or its associates are submitting the data for this certificate. If you have any questions or concerns regarding this certificate, please contact Robert Boesel. Sincerely, Jason Wilson VP Product Management, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8356, Fax: 858-592-6009 [email protected]

On-Ramp Wireless, Inc 10920 Via Frontera, Suite 200 San Diego, CA 92127, USA +1 858 592 6008 : phone +1 858 592 6009 : fax [email protected] www.onrampwireless.com March 5, 2015 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Attn: Director of Certification RE: Confidentiality Request FCC ID: XTE-ULPAP210 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, On-Ramp Wireless, Inc. hereby requests permanent confidential treatment of information accompanying this application as outlined below:  Schematics  Bill of Materials/Parts List and Placement  Operating Description/Theory of Operation  Block Diagrams On-Ramp Wireless, Inc. also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (up to 180 days):  Internal Photos  External Photos  User Manual  Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to On-Ramp Wireless, Inc. and provide unjustified benefits to its competitors. On-Ramp Wireless, Inc. understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Jason Wilson VP Product Management, On-Ramp Wireless, Inc. 10920 Via Frontera, Suite 200, San Diego, CA 92127 Phone: 858-312-8356, Fax: 858-592-6009 [email protected]

FCC ID: XTE-ULP210 Report No.: SC1411653 Page 1 of 3 External Pictures FCC ID: XTE-ULP210 Report No.: SC1411653 Page 2 of 3 FCC ID: XTE-ULP210 Report No.: SC1411653 Page 3 of 3

FCC ID: XTE-ULP210 Report No.: SC1411653 Page 1 of 1 Label location

Cavity filter over main board. Main board Main Board backside. RF board with Shields Removed.

TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121‐2912 Phone: 858 678 1400 FAX: 858 546 0364 May 11, 2015 TUV SUD BABT Octagon House, Concorde Way Segensworth Rd N, Fareham PO15 5RL Attention: Director of Certification RE: Analysis of RF Exposure for Portable and Mobile use per KDB 447498 D01 Mobile Portable RF Exposure v05r02 and RSS‐102 Issue 4 March 2010 FCC ID: XTE‐ULP210 Mobile MPE Calculation Summary using a 65cm separation distance (with a directional antenna for sectorization model HG2417P‐090, Antenna gain is = 17 dBi): Mode Output Power Power Density (mW/m 2 ) High CH 2475.63MHz 29.81 dBm 0.1985 1. Co‐Located Transmitters transmission table: Transmitter type Transmitter type that can transmit at the same time Sectorized AP Sectorized AP Note.‐ The EUT Consist of 2 AP’s with a directional antenna for sectorization (FCC ID#: XTE‐ULPAP210). Directional Antenna gain is = 17 dBi model HG2417P‐090). 2. Simultaneous Transmission MPE (worst‐case): Transmitter type MPE (mw/cm 2 ) Limit (mW/cm 2 ) MPE ratio (MPE/Limit) 2402 MHz to 2475.63 MHz 0.9036 1.0 0.9036 Sum of the ratios (should be <1.0) 0.9036 TÜV SÜD AMERICA INC 10040 Mesa Rim Road San Diego, CA 92121‐2912 Phone: 858 678 1400 FAX: 858 546 0364 3. Mobile MPE Calculation using a 65cm separation distance (: Using Power Density formula: Sൌ PG 4πR ଶ where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to isotropic R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 29.81 (dBm) Maximum peak output power at antenna input terminal: 957.19 (mW) Antenna gain(typical): 17 (dBi) Maximum antenna gain: 50.119 (numeric) Prediction distance: 65 (cm) Sourse Based Time Average Duty Cycle: 100 (%) Prediction frequency: 2400 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1.000 (mW/cm 2 ) Power density at prediction frequency: 0.9036 (mW/cm 2 ) Power density at prediction frequency: 9.036 (W/m 2 ) Margin of Compliance: 0.44 (dB) Sincerely, Juan Manuel Gonzalez Name Authorized Signatory Title: Commercial/ Wireless EMC Lab Manager

Report No. SC1411653 March 2015 America Summary Report On On Ramp Wireless Sectorized RPMA Access Point Model TRN AP‐1000 FCC Part 15 Subpart C §15.247 IC RSS‐210 Issue 8 December 2010 Note. ‐ Radiated power and radiated Spurious Emissions Only. FCC ID * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC: 8655A‐ULPAP110 Report No. SC1411653 REPORT ON TEST REPORT NUMBER PREPARED FOR On Ramp Wireless Sectorized RPMA Access Point SC1411653 On Ramp Wireless 10920 Via Frontera #200 San Diego, CA 92127‐1729 USA CONTACT PERSON Alain Charles Hardware Engineer (858) 592‐6008 [email protected] PREPARED BY Juan Manuel Gonzalez Name Authorized Signatory Title: Commercial/Wireless EMC Lab manager APPROVED BY Chip R. Fleury Name Authorized Signatory Title: EMC West Cost General Manager DATED March02, 2015 FCC ID * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC: 8655A‐ULPAP110 Report No. SC1411653 Page 3 of 39 Revision History SC1411653 On Ramp Wireless Sectorized AP Sectorized RPMA Access Point DATE OLD REVISION NEW REVISION REASON PAGES AFFECTED APPROVED BY 03/02/15 Initial Release Juan M Gonzalez FCC ID * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC: 8655A‐ULPAP110 Report No. SC1411653 Page 4 of 39 CONTENTS Section Page No 1 REPORT SUMMARY ................................................................................................................. 5 1.1 Introduction ................................................................................................................................ 6 1.2 Brief Summary of Results ........................................................................................................... 7 1.3 Product Information .................................................................................................................... 8 1.4 EUT Test configuration ............................................................................................................. 10 1.5 Deviations from the Standard ................................................................................................... 11 1.6 Modification Record ................................................................................................................. 11 1.7 Test methodology ..................................................................................................................... 11 1.8 Test facility location .................................................................................................................. 11 1.9 Test facility Registration ........................................................................................................... 11 2 TEST DETAILS ........................................................................................................................ 13 2.1 Peak output power ................................................................................................................... 14 2.2 Spurious radiated emissions .................................................................................................... 20 2.3 Radiated Immediate restricted bands ....................................................................................... 26 3 TEST EQUIPMENT USED ....................................................................................................... 29 3.1 Test Equipment Used ............................................................................................................... 30 4 Uncertainty ............................................................................................................................. 31 4.1 Measurement Uncertainty ........................................................................................................ 32 5 Diagram of test setup ............................................................................................................. 33 5.1 Test setup diagram .................................................................................................................. 34 6 ACCREDITATION, DISCLAIMERS AND COPYRIGHT .......................................................... 36 6.1 Accreditation, Disclaimers and Copyright ................................................................................. 37 7 KDB RESPONSE (09/22/2014) ............................................................................................... 38 FCC ID * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC: 8655A‐ULPAP110 Report No. SC1411653 Page 5 of 39 SECTION 1 REPORT SUMMARY Radio Testing of the On Ramp Wireless Sectorized RPMA Access Point. FCC ID * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC: 8655A‐ULPAP110 Report No. SC1411653 Page 6 of 39 1.1 INTRODUCTION The information contained in this report is intended to show limited* verification of the On Ramp Wireless Sectorized RPMA Access Point to the requirements of FCC Part 15 Subpart C §15.247 and IC RSS‐210 Issue 8 December 2010. (*Radiated power and radiated Spurious Emissions Only) Objective To perform Radio Testing to determine the Equipment Under Test's (EUT’s) compliance with the Test Specification, for the series of tests carried out. Manufacturer On Ramp Wireless Model Number(s) TRN AP‐1000 (Tested) FCC ID Number * The Sectorized AP FCC ID#: XTE‐ULPAP210 * The APs by themselves are certified as FCC: XTE‐ULPAP110 IC Number 8655A‐ULPAP110 Serial Number(s) Engineering Sample Number of Samples Tested 2 Test Specification/Issue/Date  FCC Part 15 Subpart C §15.247 (December 23, 2014).  RSS‐210 ‐ Licence‐exempt Radio Apparatus (All Frequency Bands): Category I Equipment (Issue 8, December 2010).  RSS‐Gen ‐ General Requirements and Information for the Certification of Radio Apparatus (Issue 4, November…

Text truncated - open the document above for the full version.

Nemko USA, Inc. 11696 Sorrento Valley Rd., Suite F San Diego, CA 92121-1024 Phone (858) 755-5525 Fax (858) 452-1810 FCC Part 15 Subpart C, 15.247 : 05/11/2010 CERTIFICATION TEST REPORT Report Number: 2010 10157899 FCC Project Number: 61586-1 Nex Number: 157899 Applicant: O N-RAMP WIRELESS 10920 V IA FRONTERA SUITE 200 San Diego, CA 92127 Equipment Under Test (EUT): ON-RAMP WIRELESS ACCESS POINT Model: ULPAP110 FCC ID: XTE-ULPAP110 IC: 8655A-ULPAP100 In Accordance With: FCC Part 15 Subpart C, 15.247 IC RSS-210 Issue 7 June 2007 IC RSS-Gen Issue 2 June 2007 Tested By: Nemko USA Inc. 11696 Sorrento Valley Road, Suite F San Diego, CA 92121 Authorized By: Alan Laudani, EMC/RF Test Engineer Date: October 18, 2010 Total Number of Pages: 41 Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: XTE-ULPAP100 Report Number: 2010 10157899 FCC IC: 8655A-ULPAP100 Specification: FCC Part 15 Subpart C, 15.247 Page 2 of 41 Section1: Summary of Test Results General All measurements are traceable to national standards These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 15; Subpart C and IC RSS-210. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC and IC. The assessment summary is as follows: Apparatus Assessed: On-Ramp Wireless Access Point Model: ULPAP110 Specification: FCC Part 15 Subpart C, 15.247 IC RSS-210 Issue 7 June 2007 Date Received in Laboratory: October 4, 2010 Compliance Status: Complies Exclusions: None Non-compliances: None Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: XTE-ULPAP100 Report Number: 2010 10157899 FCC IC: 8655A-ULPAP100 Specification: FCC Part 15 Subpart C, 15.247 Page 3 of 41 1.1 Report Release History REVISION DATE COMMENTS - October 18, 2010 Prepared By: Alan Laudani - October 18, 2010 Initial Release: Alan Laudani Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. TESTED BY: _ _ Date: October 18, 2010 Alan Laudani, EMC Test Engineer Nemko USA, Inc. 11696 Sorrento Valley Road, Suite F, San Diego, CA 92121 Phone (858) 755-5525 Fax (858) 452-1810 FCC ID: XTE-ULPAP100 Report Number: 2010 10157899 FCC IC: 8655A-ULPAP100 Specification: FCC Part 15 Subpart C, 15.247 Page 4 of 41 TABLE OF CONTENTS Section1: Summary of Test Results ............................................................................ 2 1.1 Report Release History ........................................................................................ 3 Section 2: Equipment Under Test ................................................................................ 5 2.1 Product Identification ............................................................................................ 5 2.2 Samples Submitted for Assessment ..................................................................... 5 2.3 Theory of Operation.............................................................................................. 6 2.4 Technical Specifications of the EUT ..................................................................... 6 Section 3: Test Conditions ........................................................................................... 7 3.1 Specifications ....................................................................................................... 7 3.2 Deviations From Laboratory Test Procedures...................................................... 7 3.3 Test Environment ................................................................................................. 7 3.4 Test Equipment .................................................................................................... 8 Section 4: Observations ............................................................................................... 9 4.1 Modifications Performed During Assessment....................................................... 9 4.2 Record Of Technical Judgements ........................................................................ 9 4.3 EUT Parameters Affecting Compliance ................................................................ 9 4.4 Test Deleted ......................................................................................................... 9 4.5 Additional Observations........................................................................................ 9 Section 5: Results Summary ...................................................................................... 10 5.1 Test Results........................................................................................................ 10 Appendix A: Test Results........................................................................................... 11 Section 15.207(a) – Power Line Conducted Emissions................................................. 11 Section 15.215(c) – 20 dB / 99% Bandwidth ................................................................. 16 Section 15.247(a)(2) – Minimum 6dB RF Bandwidth .................................................... 19 Section 15.247(b)(1) – Peak Output Power..............................…

Text truncated - open the document above for the full version.

FCC ID: XTE-ULP210 Report No.: SC1411653 Page 1 of 2 Test Set Up Pictures Figure 1(30MHz-1GHz Front Picture) FCC ID: XTE-ULP210 Report No.: SC1411653 Page 2 of 2 Figure 2 (1GHz-18GHz Back Picture)