XU8TEW735APN300 High Power PoE Access Point

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

TEW-735AP User’s Guide © Copyright 2013 TRENDnet. All rights reserved. a TEW-735AP User’s GuideTable of Contents © Copyright 2013 TRENDnet. All rights reserved. Table of Contents Product Overview �������������������������������������������������������������������������������1 Package Contents ������������������������������������������������������������������������������1 Features ��������������������������������������������������������������������������������������������1 Front Panel ����������������������������������������������������������������������������������������2 Mounting Holes ��������������������������������������������������������������������������������2 Connectors ����������������������������������������������������������������������������������������2 Product Pre-set Information �������������������������������������������������������������3 Mounting Accessories �����������������������������������������������������������������������3 Hardware Installation �������������������������������������������������������������������������4 Mount on Wall or Ceiling ������������������������������������������������������������������4 Mount on T-Bar ���������������������������������������������������������������������������������4 Wireless Performance Considerations ����������������������������������������������5 Operation Modes �������������������������������������������������������������������������������5 Access Point ��������������������������������������������������������������������������������������5 WDS Bridge ���������������������������������������������������������������������������������������5 WDS AP ���������������������������������������������������������������������������������������������5 Universal Repeater����������������������������������������������������������������������������5 Application Diagram ���������������������������������������������������������������������������6 System configuration ��������������������������������������������������������������������������7 System Management and Default Settings ��������������������������������������7 Log-in System Management for the First Time ���������������������������������7 Setup Wizard �������������������������������������������������������������������������������������9 Status ����������������������������������������������������������������������������������������������10 System ��������������������������������������������������������������������������������������������13 Wireless ������������������������������������������������������������������������������������������16 Management ����������������������������������������������������������������������������������24 Federal Communication Commission Interference Statement �������32 Europe – EU Declaration of Conformity ������������������������������������������33 RoHS �����������������������������������������������������������������������������������������������33 Limited Warranty ����������������������������������������������������������������������������35 TEW-735AP User’s GuideProduct Overview © Copyright 2013 TRENDnet. All rights reserved. 1 Product Overview Package Contents TEW-735AP package includes: • TEW-735AP • Multi-Language Quick Installation Guide • CD-ROM ( User’s Guide) • Network Cable (1.5 m / 5 ft.) • Power Adapter (12 V, 1 A) If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. TEW-735AP Features TRENDnet’s plenum rated business class N300 High Power PoE Access Point, model TEW-735AP, greatly increases wireless coverage as compared to standard access points. A variety of installation scenarios are supported with Access Point, WDS AP, WDS Bridge, and Repeater modes. Save installation time and costs with PoE. • High power radio greatly expands coverage. Wi-Fi compliant with IEEE 802.11n and IEEE 802.11b/g standards. • Power device by an Ethernet cable using standard IEEE802.3af Power over Ethernet (PoE) protocol • Support Wi-Fi Protected Setup (WPS) for easy configuration • Proven 300 Mbps wireless n • Supports multiple SSID (up to 4 SSIDs) with 802.1q VLAN tagging (AP mode) • Features Access Point, WDS AP, WDS Bridge, and Repeater modes • Advance wireless security with 64/128-bit WEP, WPA/WPA2 Radius and WPA-PSK/WPA2-PSK • Remote network management and SNMP support (v1, v2c) • Off-white housing blends into environment • Plenum rated • 3-year limited warranty *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. TEW-735AP User’s GuideProduct Overview © Copyright 2013 TRENDnet. All rights reserved. 2 Front Panel Wireless Network Power Mounting Holes Connectors DC Power 12V DC 1A (Optional) 10/100 PoE Port Mounting holes Kensington security slot Reset Button Reset Button• Push and hold for 2 seconds to reset TEW-735AP • Push and hold for more than 10 seconds to reset configuration to factory default Power LEDOFFPowered off or LED display has been disabled ONPowered on Network LEDOFFNo network connected through Ethernet port (PoE) or LED display has been disabled ONNetwork connected through Ethernet port (PoE) FlashingNetwork activities are detected on Ethernet (PoE) port Wireless LEDOFFNo wireless network connection or LED display has been disabled FlashingWireless network activities are detected TEW-735AP User’s GuideProduct Overview © Copyright 2013 TRENDnet. All rights reserved. 3 Product Pre-set Information There are 2 product pre-set labels comes with the package. The first label is located on top of plastic wrap of TEW-735AP. The second label is on the bottom of TEW-735AP. You can find default SSID, wireless key, administrator account, and administrator password. The default static management IP has set to 192.168.10.100. Mounting Accessories The mounting accessories are provide…

Text truncated - open the document above for the full version.

TRENDNET, Inc. 20675 Manhattan Place, Torrance, CA 90501 Date:2013/09/11 FCC ID: XU8TEW735AP Declaration for no non-US channel operation We, TRENDNET, Inc. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- TRENDNET, Inc. Wen Tsai / Sr. Product Manager TEL : 310-961-5500 E-mail: [email protected]

TRENDNET, Inc. 20675 Manhattan Place, Torrance, CA 90501 Date:2013/7/22 FCC ID: XU8TEW735AP Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----------------------------------------------------- TRENDNET, Inc. Wen Tsai / Sr. Product Manager TEL : 310-961-5500 E-mail: [email protected]

TRENDNET, Inc. 20675 Manhattan Place, Torrance, CA 90501 Date: 2013/7/22 AGENCY AUTHORIZATION LETTER We, the undersigned TRENDNET, Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15 and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------------------------- TRENDNET, Inc. Wen Tsai / Sr. Product Manager TEL : 310-961-5500 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

FCC ID:XU8TEW735AP

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

FCC ID: XU8TEW735AP Report No.: RF130701C07 Operational Description This device is an N300 High Power PoE Access Point, which operates in 2.4GHz band; the maximum data rate could be up to 300Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 300Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 48Vdc from POE or 12Vdc from power adapter. The antenna is PCB antenna with IPEX antenna connectors. The other instruction, please have a look at the users manual.

Report No.: RF110722C19C 1 of 5 Report Format Version 5.0.0 Reference No.: 130701C07 RF EXPOSURE REPORT REPORT NO.: RF110722C19C MODEL NO.: TEW-735AP FCC ID: XU8TEW735AP RECEIVED: Jul. 22, 2011 TESTED: Aug. 16 ~ Sep. 15, 2011 ISSUED: Aug. 05, 2013 APPLICANT: TRENDNET, Inc. ADDRESS: 20675 Manhattan Place, Torrance, CA 90501, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: RF110722C19C 2 of 5 Report Format Version 5.0.0 Reference No.: 130701C07 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. RF EXPOSURE ........................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ..................................... 5 2.2 MPE CALCULATION FORMULA................................................................................. 5 2.3 CLASSIFICATION ....................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .............................. 5 Report No.: RF110722C19C 3 of 5 Report Format Version 5.0.0 Reference No.: 130701C07 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF110722C19C Original release Aug. 05, 2013 Report No.: RF110722C19C 4 of 5 Report Format Version 5.0.0 Reference No.: 130701C07 1. CERTIFICATION PRODUCT: N300 High Power PoE Access Point MODEL NO.: TEW-735AP BRAND: TRENDnet APPLICANT: TRENDNET, Inc. TESTED: Aug. 16 ~ Sep. 15, 2011 (All tests except 6dB bandwidth and Power Spectral Density tests) Jul. 31, 2013 ( 6dB bandwidth and Power Spectral Density tests) TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: TEW-735AP) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Aug. 05, 2013 Ivy Lin / Specialist APPROVED BY: , DATE :Aug. 05, 2013 Ken Liu / Senior Manager Report No.: RF110722C19C 5 of 5 Report Format Version 5.0.0 Reference No.: 130701C07 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 28.6 4 20 0.362 1 ---END---

Report No.: RF110722C19C 1 of 77 Report Format Version 5.2.0 Reference No.: 110722C19, 130701C07 FCC TEST REPORT (15.247) REPORT NO.: RF110722C19C MODEL NO.: TEW-735AP FCC ID: XU8TEW735AP RECEIVED: Jul. 22, 2011 TESTED: Aug. 16 ~ Sep. 15, 2011 (All tests except 6dB bandwidth and Power Spectral Density tests) Jul. 31, 2013 ( 6dB bandwidth and Power Spectral Density tests ) ISSUED: Aug. 05, 2013 APPLICANT: TRENDNET, Inc. ADDRESS: 20675 Manhattan Place, Torrance, CA 90501, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF110722C19C 2 of 77 Report Format Version 5.2.0 Reference No.: 110722C19, 130701C07 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 4 1. CERTIFICATION .......................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 6 3. GENERAL INFORMATION .......................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................................. 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................. 9 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 14 4. TEST TYPES AND RESULTS ................................................................................... 15 4.1 RADIATED EMISSION MEASUREMENT ................................................................. 15 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ............................................... 15 4.1.2 TEST INSTRUMENTS ............................................................................................... 16 4.1.3 TEST PROCEDURES ............................................................................................... 17 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 17 4.1.5 TEST SETUP ............................................................................................................. 18 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 18 4.1.7 TEST RESULTS ........................................................................................................ 19 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 33 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 33 4.2.2 TEST INSTRUMENTS ............................................................................................... 33 4.2.3 TEST PROCEDURES ............................................................................................... 34 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 34 4.2.5 TEST SETUP ............................................................................................................. 34 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 34 4.2.7 TEST RESULTS ........................................................................................................ 35 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 39 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 39 4.3.2 TEST SETUP ............................................................................................................. 39 4.3.3 TEST INSTRUMENTS ............................................................................................... 39 4.3.4 TEST PROCEDURE .................................................................................................. 39 4…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (TEST MODE A) 2 CONDUCTED EMISSION TEST (TEST MODE B) 3 RADIATED EMISSION TEST (TEST MODE A) 4 RADIATED EMISSION TEST (TEST MODE B)