XU8TEW805UBAC1200 Dual Band USB Adapter

TRENDnet User’s Guide Cover Page © Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide Table of Contents i Contents Product Overview ........................................................................... 1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features........................................................................................... 2 Application Diagram ...................................................................................................... 2 Installation ...................................................................................... 3 Software Installation...................................................................................................... 3 Hardware Installation .................................................................................................... 3 Wireless Utility ............................................................................... 4 Wireless Utility Setting .................................................................................................. 4 General .......................................................................................................................... 4 Profile ............................................................................................................................ 4 Available Networks ........................................................................................................ 6 Status ............................................................................................................................. 6 Statistics ......................................................................................................................... 7 WiFi Protected Setup (WPS) .......................................................................................... 8 Pin Input Configuration (PIN) .................................................................................... 8 Push Button Configuration (PBC) .............................................................................. 9 About ........................................................................................................................... 10 Technical Specifications................................................................. 11 Troubleshooting ............................................................................ 12 Appendix ...................................................................................... 13 Federal Communication Commission Interference Statement ................................... 16 Europe – EU Declaration of Conformity ...................................................................... 17 Limited Warranty ......................................................................................................... 19 © Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TEW-805UB 1 Product Overview TEW-805UB Package Contents In addition to your wireless adapter, the package includes: • TEW-805UB • CD-ROM (Utility & Driver) • Multi-Language Quick Installation Guide If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor from which the product was purchased. Features TRENDnet's AC1200 Dual Band Wireless USB Adapter, model TEW-805UB, connects a laptop or desktop computer to a revolutionary Wireless AC network. Connect to a Wireless AC network at an amazing 867 Mbps or to a Wireless N network at up to 300 Mbps. A SuperSpeed 5 Gbps USB 3.0 port maintains a high speed connection to your computer. Quickly connect to a Wireless AC or N network at the touch of a button with the convenience of one-touch Wi-Fi Protected Setup (WPS). An LED on the front of the adapter conveys device status. Upgrade your computer's wireless connection to experience the speed of revolutionary Wireless AC. Wireless AC: Next generation Wireless AC Dual Band: Up to 867 Mbps Wireless AC or 300 Mbps Wireless N Compatible: Connects to standard Wireless N networks USB 3.0: SuperSpeed 5 Gbps USB 3.0 connection to computer Coverage: Expanded coverage with MIMO technology One Touch Connection: Connect to a router at the touch of the Wi-Fi Protected Setup (WPS) button • Wi-Fi compliant with IEEE 802.11ac and 802.11n standards • High-speed data rates up to 867 Mbps with 802.11ac technology and 300 Mbps with 802.11n technology • USB 3.0 connector • LED indicator • Backwards compatible with IEEE 802.11g, IEEE 802.11b, and IEEE 802.11a networks • Compatible with Windows 8 (32/64-bit), 7 (32/64-bit), Vista (32/64-bit), and XP(32/64-bit) operating systems • One-touch network connection with Wi-Fi Protected Setup (WPS) button • Dynamic Data Rate Scaling from 867 Mbps to 1 Mbps • Supports advanced wireless encryption up to WPA2-RADIUS • Easy user setup and diagnostic utilities • Coverage of up to 100 meters indoor (330 feet) and 300 meters outdoor (980 feet) • 3- year limited warranty © Copyright 2013 TRENDnet. All Rights Reserved. TRENDnet User’s Guide TEW-805UB 2 Product Hardware Features • Power/Status LED -This LED turns on when the USB adapter has power and ready for use and blinks during wireless data transmission. • WPS (Wi-Fi Protected Setup) button – Push and hold this button for 3 seconds to activate WPS. The Power/Status LED will blink blue when WPS is activated. Application Diagram A router is installed near the modem (typically supplied by your ISP “Internet Service Provider”) and physically connected to it from the router’s WAN port to the modem’s network port which connects to the Internet creating a wireless network. Wireless signals from the router are broadcasted to wireless clients such as laptops with wireless capabilities. The TEW-8…

Text truncated - open the document above for the full version.

20675 Manhattan Place, Torrance, CA 90501, USA TEL.: (310961-5500 FAX: (310)961-5511 Date: 2013-03-08 FCC ID: XU8TEW805UB Declaration for DFS client devices We, TRENDNET, Inc., declare that the device does not support any non-US channels in all the operational mode(s), like Ad-Hoc...etc, for the following product. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Wen Tsai /Sr. Product Manager TRENDNET, Inc. TEL.: (310)961-5500 ext.5474 FAX: (310)961-5511 [email protected]

20675 Manhattan Place, Torrance, CA 90501, USA TEL.: (310961-5500 FAX: (310)961-5511 Declaration for DFS client devices Date: 2013-03-08 FCC ID: XU8TEW805UB Dear Examiner: Per KDB# 848637, We, TRENDNET, Inc., declare that following description truly represent our product in consideration. Please do not hesitate to contact us, if further info is required. Thanks. a). A channel/frequency plan for the device showing the channels that have active scanning or passive scanning. Active scanning is where the device can transmit a probe (beacon) and passive scanning is where the device can listen only without probes. Below is the channel / frequency plan for the device b). For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) or in different bands (devices with multiple equipment classes or those that operate on non‐DFS frequencies), or modular devices that configure the modes of operations through software; the applicant must provide in the application software and operations description that discuss how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by an end user or an installer. Also, include an attestation that the device complies with the CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 245224572462 Scan Type Active Active Active Active Active Active Active Active ActiveActiveActive CH 36 40 44 48 52 56 60 64 Frequency (MHz) 5180 5200 5220 5240 5260 5280 5300 5320 Scan Type Active Active Active Active PassivePassivePassive Passive CH 100 104 108 112 116 132 136 140 Frequency (MHz) 5500 5520 5540 5560 5580 5660 5680 5700 Scan Type Passive Passive PassivePassivePassivePassivePassive Passive CH 149 153 157 161 165 Frequency (MHz) 5745 5765 5785 5805 5825 Scan Type Active Active Active Active Active requirements for software configuration control as discussed in KDB #594280. On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad‐hoc mode, on US non‐DFS channels. As described in the answer to question a, the device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be changed or modified by end user. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Wen Tsai /Sr. Product Manager TRENDNET, Inc. TEL.: (310)961-5500 ext.5474 FAX: (310)961-5511 [email protected]

2013-03-01 FCC ID: XU8TEW805UB Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ___________________________________ Wen Tsai /Sr. Product Manager TRENDNET, Inc. TEL.: (310)961-5500 ext.5474 FAX: (310)961-5511 [email protected] 20675 Manhattan Place, Torrance, CA 90501, USA TEL.: (310961-5500 FAX: (310)961-5511

20675 Manhattan Place, Torrance, CA 90501, USA TEL.: (310)961-5500 FAX: (310)961-5511 AUTHORIZATION LETTER Date:2013-03-01 To whom it may concern: We, the undersigned TRENDNET, Inc. hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15C/E and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------- Wen Tsai /Sr. Product Manager TRENDNET, Inc. TEL.: (310)961-5500 ext.5474 FAX: (310)961-5511 [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Label location

備註 日期 產品機種 產品料號 客戶名稱 申請者設計者 6450T805UB1*xA1 2013.01.22 TRENDnet 確認簽名 備註 FCC ID:XU8TEW805UB "See Caution in Manual" 1 8 . 0 0 m m 45.00 mm Vicki X:規格 TEW-805UB #為半成品規格 A規 /FCC E規 /ETSI 半成品料號請對工單 TRENDware指定MAC ID 彭美芳 **注意事項** 客戶序號編碼原則 C2YYWW5UXXXXX C2:友勁代碼(固定) YY : 西元年份, ex~13:2013年 WW: 週數, ex~06:第六週 5U:客戶產品名稱 XXXXX: 流水號 半成品版本由客戶指定 FCC ID: XU8TEW805UB 字型:Arial MAC：XXXXXXXXXXXX/# S/N:客戶序號 Made in China Model: TEW-805UB H/W:V1.0R

Page 4 Page 5 Page 6 Page 7 Page 8

FCC ID: XU8TEW805UB Report No.: RF130107C12 Operational Description This device is a AC1200 Dual Band USB Adapter, which operates in both of 2.4GHz and 5GHz bands; the maximum data rate could be up to 867Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 867Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 5Vdc from host equipment. The antenna is Printed antenna with UFL antenna connector. For more detailed instruction, please take a look at the user’s manual. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of how this requirement is met” Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted.

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 25 Report No. : SA130107C12 Issued Date : Mar. 07, 2013 Revision : R01 FCC SAR Test Report Report No. : SA130107C12 Applicant : TRENDNET, Inc. Address : 20675 Manhattan Place, Torrance, CA 90501, USA Product : AC1200 Dual Band USB Adapter FCC ID : XU8TEW805UB Brand : TRENDnet Model No. : TEW-805UB Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 / KDB 447498 D01 v05 / KDB 447498 D02 v02 Date of Testing : Feb. 23, 2013 ~ Mar. 01, 2013 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 25 Report No. : SA130107C12 Issued Date : Mar. 07, 2013 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 14 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods ..........................…

Text truncated - open the document above for the full version.

Report No.: RF130107C12-2 1 of 24 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF130107C12-2 MODEL NO.: TEW-805UB FCC ID: XU8TEW805UB RECEIVED: Jan. 07, 2013 TESTED: Mar. 18, 2013 ISSUED: Mar.19, 2013 APPLICANT: TRENDNET, Inc. ADDRESS: 20675 Manhattan Place, Torrance, CA 90501, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130107C12-2 2 of 24 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 3 1. CERTIFICATION ....................................................................................................................... 4 3. EUT INFORMATION ................................................................................................................. 5 3.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ...................................................... 5 3.2 EUT SOFTWARE AND FIRMWARE VERSION ....................................................................... 5 3.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ..................................................... 5 3.4 EUT MAXIMUM CONDUCTED POWER .................................................................................. 6 3.5 EUT MAXIMUM E.I.R.P. POWER ............................................................................................. 7 3.6 TRANSMIT POWER CONTROL (TPC) .................................................................................... 8 3.7 STATEMENT OF MAUNFACTURER ........................................................................................ 8 4. U-NII DFS RULE REQUIREMENTS ......................................................................................... 9 4.1 WORKING MODES AND REQUIRED TEST ITEMS ................................................................ 9 4.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................................................. 10 5. TEST & SUPPORT EQUIPMENT LIST .................................................................................. 12 5.1 TEST INSTRUMENTS ............................................................................................................ 12 5.2 DESCRIPTION OF SUPPORT UNITS ................................................................................... 12 6. TEST PROCEDURE ............................................................................................................... 13 6.1 ADT DFS MEASUREMENT SYSTEM .................................................................................... 13 6.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ................................................ 14 6.3 DEVIATION FROM TEST STANDARD ................................................................................... 14 6.4 CONDUCTED TEST SETUP CONFIGURATION ................................................................... 15 6.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................................................. 15 7. TEST RESULTS ...................................................................................................................... 16 7.1 SUMMARY OF TEST RESULTS ............................................................................................ 16 7.2 DETELED TEST RESULTS .................................................................................................... 17 7.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. . 17 7.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME.................................. 18 7.2.3 NON-OCCUPANCY PERIOD ................................................................................................. 20 7.2.4 NON-ASSOCIATED TEST ...................................................................................................... 22 7.2.5 NON- CO-CHANNEL TEST .................................................................................................... 22 8. INFORMATION ON THE TESTING LABORATORIES ........................................................... 23 9. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGI NEERING CHANGES TO THE EUT BY THE LAB ................................................................................................................... 24 Report No.: RF130107C12-2 3 of 24 Report Format Ve…

Text truncated - open the document above for the full version.

Report No.: RF130107C12 1 of 86 Report Format Version 5.1.0 FCC TEST REPORT (15.247) REPORT NO.: RF130107C12 MODEL NO.: TEW-805UB FCC ID: XU8TEW805UB RECEIVED: Jan. 07, 2013 TESTED: Jan. 10 ~ Jan. 15, 2013 ISSUED: Feb. 25, 2013 APPLICANT: TRENDNET, Inc. ADDRESS: 20675 Manhattan Place, Torrance, CA 90501, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130107C12 2 of 86 Report Format Version 5.1.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 5 1. CERTIFICATION ....................................................................................................................... 6 2. SUMMARY OF TEST RESULTS .............................................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ............................................................................................ 7 3. GENERAL INFORMATION ....................................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................................... 11 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................................... 15 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................ 16 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ............................................................. 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................. 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............................. 17 4.1.2 TEST INSTRUMENTS ............................................................................................................ 18 4.1.3 TEST PROCEDURES ............................................................................................................. 19 4.1.4 DEVIATION FROM TEST STANDARD ................................................................................... 19 4.1.5 TEST SETUP .......................................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ........................................................................................... 20 4.1.7 TEST RESULTS ...................................................................................................................... 21 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................…

Text truncated - open the document above for the full version.