XU8TVIP745SICWiFi HD Baby Cam

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: (310) 961-5500, Fax: (310) 961- 5511 To: Federal Communications Commission Authorization and Evaluation Division 08, 05, 2014 ATTESTATION FCC ID: XU8TVIP745SIC Product description: WiFi HD Baby Cam Model: TV-IP745SIC We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. We also promise that the end user or installer will not be able to change countries. For United States only channels 1-11 will be available. Best Regards Wen Tsai / Sr. Product Manager TRENDnet, INC Tel: (310) 961-5500 5474 Fax: (310) 961-5511 E-mail: [email protected]

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: (310) 961-5500, Fax: (310) 961- 5511 Attestation for FCC Declaration of Conformity Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2014/08/05 FCC ID: XU8TVIP745SIC To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Regards, Wen Tsai / Sr. Product Manager TRENDnet, INC Tel: (310) 961-5500 5474 Fax: (310) 961-5511 E-mail: [email protected]

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: (310) 961-5500, Fax: (310) 961-5511 Request for Confidentiality Date: __2014/08/05__ Subject: Confidentiality Request for: ______ XU8TVIP745SIC ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term  Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term  Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual ______TRENDnet, INC____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: ____Wen Tsai / Sr. Product Manager__________________ (Signature/Title) (Print name)

20675 Manhattan Place, Torrance, CA 90501, USA. Tel: (310) 961-5500, Fax: (310) 961-5511 Declaration of Authorization We Name: TRENDnet, INC Address: 20675 Manhattan Place City: Torrance, CA 90501 Country: U.S.A. Declare that: Name Representative of agent: Gene Chang Agent Company name: QuieTek Corporation Address: 2F, No. 345, Xinhu 2nd Rd., Neihu District, City: Taipei City 114, Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s): Product description: WiFi HD Baby Cam Type designation: TV-IP745SIC Trademark: TRENDnet FCC ID: XU8TVIP745SIC on our behalf. Date: 08/05/2014 City: Torrance Signature: Wen Tsai / Sr. Product Manager TRENDnet, INC Tel: (310) 961-5500 5474 Fax: (310) 961-5511 E-mail: [email protected]

Report No： 1470566R-RFUSP26V00 Page: 147 of 161 Attachement EUT Photograph (1) EUT Photo (2) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 148 of 161 (3) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 149 of 161 (4) EUT Photo (5) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 150 of 161 (6) EUT Photo (7) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 151 of 161 (8) EUT Photo (9) EUT Photo

TRENDnet, INC 20675 Manhattan Place, Torrance, CA 90501 U.S.A. FCC ID.: XU8TVIP745SIC FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below.

Report No： 1470566R-RFUSP26V00 Page: 152 of 161 (10) EUT Photo (11) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 153 of 161 (12) EUT Photo (13) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 154 of 161 (14) EUT Photo (15) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 155 of 161 (16) EUT Photo (17) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 156 of 161 (18) EUT Photo (19) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 157 of 161 (20) EUT Photo (21) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 158 of 161 (22) EUT Photo (23) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 159 of 161 (24) EUT Photo (25) EUT Photo Report No： 1470566R-RFUSP26V00 Page: 160 of 161 (26) EUT Photo (27) EUT Photo (MB) Report No： 1470566R-RFUSP26V00 Page: 161 of 161 (28) EUT Photo (Antenna)

Report No. 1470566R-RF-US-Exp Page: 1 of 4 RF Exposure Evaluation Declaration Product Name：WiFi HD Baby Cam Model No. ：TV-IP745SIC FCC ID. ：XU8TVIP745SIC Applicant : TRENDnet, INC Address : 20675 Manhattan Place, Torrance, CA 90501 U.S.A. Date of Receipt : 2014/07/25 Date of Declaration : 2014/09/10 Report No. : 1470566R-RF-US-Exp Report Version : V1.0 The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No. 1470566R-RF-US-Exp Page: 2 of 4 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 1470566R-RF-US-Exp Page: 3 of 4 1.3. Test Result of RF Exposure Evaluation Product WiFi HD Baby Cam Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.93dBi or 1.96 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11b WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412 73.2825 0.02887 6 2437 69.3426 0.02731 11 2462 72.1107 0.02840 IEEE 802.11g WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412 28.7078 0.01131 6 2437 73.1139 0.02880 11 2462 20.9411 0.00825 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 . Report No. 1470566R-RF-US-Exp Page: 4 of 4 Product WiFi HD Baby Cam Test Mode Transmit Test Condition RF Exposure Evaluation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.93dBi or 1.96 in linear scale. Output Power into Antenna & RF Exposure Evaluation Distance: IEEE 802.11n (20MHz) ANT 0 WLAN Function Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412 19.9526 0.00786 6 2437 48.1948 0.01898 11 2462 18.3231 0.00722 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 .

Report No： 1470566R-RFUSP26V00 Page: 1 of 161 FCC Test Report Product Name：WiFi HD Baby Cam Model No. ：TV-IP745SIC FCC ID. ：XU8TVIP745SIC Applicant ： TRENDnet, INC Address ： 20675 Manhattan Place, Torrance, CA 90501 U.S.A. Date of Receipt： 2014/07/25 Issued Date ：2014/09/10 Report No. ：1470566R-RFUSP26V00 Report Version ： V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No： 1470566R-RFUSP26V00 Page: 2 of 161 Test Report Certification Issued Date : 2014/09/10 Report No. : 1470566R-RFUSP26V00 Product Name ： WiFi HD Baby Cam Applicant ： TRENDnet, INC Address ： 20675 Manhattan Place, Torrance, CA 90501 U.S.A. Model No. ： TV-IP745SIC FCC ID. ： XU8TVIP745SIC EUT Test Voltage : AC 100-240V, 50/60Hz Trade Name ： TRENDnet Applicable Standard ： FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2013 ANSI C63.4: 2009 Test Result ： Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Documented By : ( Fonbo Fang / Engineering Adm. Assistant ) Reviewed By : ( JuBo Shen / Engineer) Approved By : ( Roy Wang / Director ) Report No： 1470566R-RFUSP26V00 Page: 3 of 161 Laboratory Information We, QuieTek Corporation, are an independent RF consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025 specified testing scopes: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site:http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory: No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory: No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Taiwan R.O.C. : TAF, Accreditation Number: 1313 NCC, Certificate No : NCC-RCB-07 USA : FCC, Registration Number: 365520 Canada : IC, Submission No: 150981 Report No： 1470566R-RFUSP26V00 Page: 4 of 161 TABLE OF CONTENTS Description Page 1. General Information.............................................................................................................. 6 1.1. EUT Description ............................................................................................................. 6 1.2. Test Mode ..................................................................................................................... 10 1.3. Tested System Details .................................................................................................. 11 1.4. Configuration of tested System .................................................................................... 11 1.5. EUT Exercise Software ................................................................................................ 12 1.6. Test Facility...................................................................................................................13 2. Conducted Emission .......................................................................................................... 14 2.1. Test Equipment............................................................................................................. 14 2.2. Test Setup .................................................................................................................... 14 2.3. Limits ............................................................................................................................ 15 2.4. Test Procedure ............................................................................................................. 15 2.5. Test Specification.......................................................................................................... 15 2.6. Uncertainty ................................................................................................................... 15 2.7. Test Result....................................................................................................................16 2.8. Test Photo .................................................................................................................... 18 3. Peak Power Output ............................................................................................................ 19 3.1. Test Equipment............................................................................................................. 19 3.2. Test Setup .................................................................................................................... 19 3.3. Test procedures ............................................................................................................ 19 3.4. Limits ............................................................................................................................ 19 3.5. Test Specification.......................................................................................................... 19 3.6. Uncertainty ................................................................................................................... 19 3.7. Test Result....................................................................................................................20 4. Radiated Emission ............................................................................................................. 32 4.1. Test Equipment.....…

Text truncated - open the document above for the full version.

Report No： 1470566R-RFUSP26V00 Page: 18 of 161 2.8. Test Photo Test Mode ： Mode 1: Transmit Description： Front View of Conducted Emission Test Setup Test Mode ： Mode 1: Transmit Description： Back View of Conducted Emission Test Setup Report No： 1470566R-RFUSP26V00 Page: 59 of 161 4.8. Test Photo Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Bi-Log) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Bi-Log) Report No： 1470566R-RFUSP26V00 Page: 60 of 161 Test Mode ： Mode 1: Transmit Description： Front View of Radiated Emission Test Setup (Horn) Test Mode ： Mode 1: Transmit Description： Back View of Radiated Emission Test Setup (Horn)