
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
בב ❐ 広 㢝 Product Instruction Manual ӗ૱〠˖ LEDᇱ⚟ Product Name:LED downlight රਧ㕆⸱˖ 53166161 Model No.˖53166161 ⭏ӗ୶˖ᒯьᗧ䊚⏖䗮⭥≄㛑ԭᴹ䲀ޜਨ Manufacturer: Elec-tech International.,Co.Ltd ൠ ൰˖ᒯьⴱ⨐⎧ᐲୀᇦ(s)䭷䠁ࠔ䐟1ਧ Address: Guangdong Province Zhihai City, Tanjiawan, No.1 Jinfeng Rd ⭥䈍Tel˖0756-3390990 ՐⵏFax˖0756-3390778 㖁൰We b˖www.electech.com.cn ⴞⴞᖅ 1.ӗ૱ㆰӻProduct Introduction----------------------------------------------------------------------3 1.1. ӗ૱᧿䘠˖Product Description ----------------------------------------------------------3 1.2 . ӗ૱皮മ---------------------------------------------------------------------------------------3 2. ӗ૱⢩ᙗ-------------------------------------------------------------------------------------------------3 2.1ˊ ӗ૱⢩⛩Product characteristic ---------------------------------------------------------3 2.2ˊ ᢰᵟ৲ᮠSpecification--------------------------------------------------------------------4 2.3. 䝽ݹᙗ㜭Light Distribution -------------------------------------------------------------4 3.֯⭘ᯩ⌅Method of application---------------------------------------------------------------5 3.1ˊ ᆹ㻵䈤᰾Installation instruction--------------------------------------------------------5 3.2ˊ ᆹ㻵皮മInstallation schematic diagram-------------------------------------------6 3.3ˊ 㔤ᣔ䈤᰾Maintenance Instruction-----------------------------------------------------7 4.⧟ໍາ㾱≲Environmental requirement-------------------------------------------------------7 5.ӗ૱ᢗ㹼ḷ߶Product carried standard----------------------------------------------------7 6.व㻵䈤᰾Package instruction-----------------------------------------------------------------7 6.1ˊ व㻵㿴ṬPackage specification--------------------------------------------------------7 6.2ˊ व㻵অPackage list -------------------------------------------------------------------7 1.ӗӗ૱ㆰӻProduct Introduction 1.1.ӗ૱᧿䘠˖Product Description ˖ ˄䝽ᇎ⢙മwith physical map˅ 1.2.ӗ૱皮മ˖ Product schematic diagram˖ 1ˊཆᖒቪረ:190*83mm. Dimension: 190*83mm. 2ˊཆ༣ѪAL+PBT Housing AL+PBT 3ˊཆ㖞⭥Ⓚ. Remote driver 4ˊ儈ӞLED⚟⨐. High efficacy LED 2.ӗӗ૱⢩ᙗProduct features 2.1.ӗ૱⢩⛩Product characteristic ˖ a.䮯ሯભ5зሿᰦԕк˗ Long lifetime (above 30,000hrs) b.儈᭸㢲㜭⧟؍˗ High efficiency, energy saving, environmental friendly c.ࠫߢ㙀,ᣇ䴷㜭࣋ᕪ,ᰐ3点ཆ㓯઼㓒ཆ㓯䗀ሴ ˗ Impact resistant, shock resistant, no UV and IR radiation d.㔯㢢⧟؍ˈᰐᴹᇣ≄փᧂ᭮ˈ֯⭘✝䟿վˈᆹޘਟ䶐DŽ Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable . e.ݹ㢢㓟↓ˈ֯⭘䗷〻ѝᰐ仁䰚ˈᨀᴤྭⲴ㿶㿹ᝏਇˈ؍ᣔӪ㿶࣋DŽ Authentic and pure light color, no flicker, protecting your eyes while providing better visual enjoyment. 2.2ᢰᵟ৲ᮠSpecification 亩ⴞঅս৲ᮠ ⭥≄৲ᮠElectronic ratings ᮤ⚟࣏⦷:Rated Power/W: 䗃ޕ⭥9Rated Input voltage/V$&9 ᐕ仁⦷+]Frequency/Hz+] ⭥Ⓚ᭸⦷Rated Power efficiency! ࣏⦷ഐᮠ˄3)˅Rated Power Factor! 䈳ݹᯩᔿ'LPPLQJPHWKRG=LJEHH䈳ݹ䈳㢢 ݹⓀ৲ᮠPhotometric ratings /('㊫රᮠ䟿/('7\SH4XDQWLW\SFV ᮤ⚟ݹ䙊䟿/P/XPHQOP 㢢.7HPSUDWXUH... ᱮ㢢ᤷᮠ/Ra CRI ı ⢙⢙⨶৲ᮠPhysical information ᶀ䍘 Material $/ǃ3%7 ᐕᓖ operating temperature ćać ۘᆈᓖ storage temperature ̚ćDŽ 䱢ᣔᄬ㓗 IP rating ,3 ⚟ާ㿴Ṭ(L×W×H)/mm Luminaire dimension(L×W×H)/mm PP 䟽߰/g Net weight .J 䇮䇑ሯભ /hrs Lifetime/hrs K 3֯֯⭘ᯩ⌅Method of application 3.1֯⭘ᯩ⌅ A.ሶ⚟ާ઼㖁ޣ਼ᰦ䙊⭥. B.䘋㹼䝽ሩ˄䝽ሩᡀ࣏ˈ⚟ާ䰚⛱ࠐл˅ C.䝽ሩᡀ࣏ˈᢃᔰAPP⭼䶒ਟ䘋㹼ᔰޣˈ䈳ݹˈ䈳㢢 3.2ᆹ㻵皮മ(A) Installation schematic diagram(A) A࠷ᯝ⭥ⓀˈỰḕᆹ㻵ᇱቪረDŽ A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit kit can fit the luminaire. B:ሶE26⚟ཤ䘋ᒦ㍗ B: crew clockwise the E26 adaptor into the lamp holder. Tighten. C:䙊䗷ᆹ㻵ᇱ䘹ᤙᕩ㉗പᇊ⡷Ⲵᆄսˈ5ረᇱᆄսྲᐖлമˈ6ረᇱྲਣлമDŽ 5ረᇱ 6ረᇱ D:䘎᧕ྭ䘎᧕ಘDŽ D: Connect the male to the female connector. E:ሶᇱ⚟㻵䘋ᆹ㻵ᇱᒦ㍗DŽ E: Squeeze the “V shape” clips to match the grooves on the inside of the can, and slide the luminaire up into the can firmly. F:ሬ䙊⭥Ⓚ F: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status. 3.2ᆹ㻵皮മ(B) Installation schematic diagram(B) A࠷ᯝ⭥ⓀˈỰḕᆹ㻵ᇱቪረDŽ A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit kit can fit the luminaire. Picture 1 B:ሶE26⚟ཤ䘋ᒦ㍗ B: crew clockwise the E26 adaptor into the lamp holder. Tighten. C:䙊䗷ᆹ㻵ᇱ䘹ᤙᕩ㉗പᇊ⡷Ⲵᆄսˈ5ረᇱᆄսྲᐖлമˈ6ረᇱྲਣлമDŽ 5ረᇱ 6ረᇱ D:䘎᧕ྭ䘎᧕ಘDŽ D: Connect the male to the female connector. E:ሶᇱ⚟᤹㇝ཤᯩੁ㻵䘋ᆹ㻵ᇱѝDŽ E: slide the luminaire up into the can firmly. E:ሬ䙊⭥Ⓚ E: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status. 3.3㔤ᣔ䈤᰾Maintenance Instruction *Ѫᔦ䮯֯⭘ሯભ䈧य֯⭘䞂㋮ᄬᥕਁᙗⓦࡲᬖᤝ⚟փ˗ *Do Not use volatile solvent such as alcohol to clean the troffer. *⌱ᰦਟԕ֯⭘Ḅỹᐳ⋮㛕Ⲳ≤ᤗᒢਾᬖᤝ⚟փ˗ *Use soft cotton cloth with suds to clean the troffer . *䶎уъӪ༛䈧य؞⚟ާ˗ *Non-profecssional do Not attempt to take apart and repair the troffer . *нਟন䖟㔶ᡆ䖟㓯ˈྲ᷌ᦏൿ享䈧уъӪ༛ᡆࡦ䙐ল୶ᴤᦒDŽ *No disassemble the soft cord, if broken, please invite professional personnel or ask the manufacturer to change 4⧟⧟ໍາ㾱≲Environmental requirement ֯⭘⧟ໍາᓖOperating temperature˖-25̚40ć˗ ᆈ䍞⧟ໍາᓖStorage temperature˖-40̚80ćDŽ 5ӗ૱ᢗ㹼ḷ߶Product carried standard UL1598-2008 UL8750 6व㻵䈤᰾Package instruction 6.2व㻵㿴ṬPackage specification व㻵ⴂቪረPackage sizeL215*W92*H217mm ⚟ާᮠ䟿/㇡Lamp Qty./box1྇/㇡ 1set/CTN ߰ 䟽 Net weight 0.38Kg ∋ 䟽 Gross weight 0.45Kg 6.3व㻵অPackage list ˖ ⢙૱〠Itemᮠ䟿Quantity ᇱ⚟Ceiling light 1 ӗ૱䝽ԦवAccessories1 䈤᰾ҖManual1 9 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does c…
Text truncated - open the document above for the full version.
Tony yang
Tony yang
Elec-tech International.,Co.Ltd Model:531661XX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: Text is Black in color and justified. Labels are printed in indelible ink on permanent adhesive silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Proposed Label Location on EUT FCC ID Label Location REPORT NO.: FCC PART 15.249 FCC ID: XZH-531661XX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including
MPE Calculation Method E (V/m) = (30*P*G) 0.5 /d Power Density: Pd (W/m2) = E 2 /377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Calculated Result and Limit (WORSE CASE IS AS BELOW) Antenna Gain (Numeric) Peak Output Power (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 1(0dBi) 63.97 (18.06dBm) 0.0127 1 Compiles
Test Report Number:LCZE1503003701 Total Page(s): 36 Applicant Name: Elec-Tech International Co., Ltd. Applicant Address: No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R. China Test item: LED Downlight remote control Model / Type Reference: 531661XX(XX=00-99) FCC ID: XZH-531661XX Date of Issue: 2015-4-03 Testing Laboratory: Global United Technology Services Co., Ltd. Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China Test Specification: FCC CFR Title 47 Part 15 Subpart C Section 15.247:2014 Test Result: Passed Compiled by:Reviewed by: 2015-4-03Joe Zhou DateNameSignature 2015-4-03Gordon Xie DateNameSignature Remark: N/A The duplication of this report or parts of it and its use for advertising purposes is only allowed with permission of the testing laboratory. This report contains the result of the examination of the product sample submitted by the applicant. A general statement concerning the quality of the products from the series manufacture cannot be derived therefore. Page 2 of 36Report No.:LCZE1503003701 2Contents Page 1COVER PAGE ...........................................................................................................................................1 2 CONTENTS .............................................................................................................................................. 2 3 TEST SUMMARY ..................................................................................................................................... 3 4 GENERAL INFORMATION ...................................................................................................................... 4 4.1 CLIENT INFORMATION......................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.3 TEST MODE........................................................................................................................................ 5 4.4 DESCRIPTION OF SUPPORT UNITS....................................................................................................... 5 4.5 TEST FACILITY.................................................................................................................................... 6 4.6 TEST LOCATION................................................................................................................................. 6 5 TEST INSTRUMENTS LIST ..................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA...................................................................................... 8 6.1 ANTENNA REQUIREMENT..................................................................................................................... 8 6.2 CONDUCTED EMISSIONS..................................................................................................................... 9 6.3 CONDUCTED PEAK OUTPUT POWER.................................................................................................. 12 6.4 CHANNEL BANDWIDTH...................................................................................................................... 14 6.5 POWER SPECTRAL DENSITY............................................................................................................. 16 6.6 BAND EDGES.................................................................................................................................... 18 6.6.1 Conducted Emission Method ..................................................................................................... 18 6.6.2 Radiated Emission Method ........................................................................................................19 6.7 SPURIOUS EMISSION......................................................................................................................... 21 6.7.1 Conducted Emission Method ..................................................................................................... 21 6.7.2 Radiated Emission Method ........................................................................................................23 7 TEST SETUP PHOTO ............................................................................................................................ 29 8 EUT CONSTRUCTIONAL DETAILS .....................................................................................................31 LCTECH (Zhongshan) Testing Service Co.,Ltd Add: 2/F.,Technology and Enterprise Development Center, Guangyuan Road, Xiaolan, Zhongshan, Guangdong, China Tel:+86-760-22833366 Fax:+86-760-22833399E-mail:[email protected] http://www.lccert.com Page 3 of 36Report No.:LCZE1503003701 3Test Summary Test ItemSection in CFR 47Result Antenna requirement15.203/15.247 (c)Pass AC Power Line Conducted Emission15.207Pass Conducted Peak Output Power15.247 (b)(3)Pass Channel Bandwidth15.247 (a)(2)Pass Power Spectral Density15.247 (e)Pass Band Edge15.247(d)Pass Spurious Emission15.205/15.209Pass Pass: The EUT complies with the essential requirements in the standard. LCTECH (Zhongshan) Testing Service Co.,Ltd Add: 2/F.,Technology and Enterprise Development Center, Guangyuan Road, Xiaolan, Zhongshan, Guangdong, China Tel:+86-760-22833366 Fax:+86-760-22833399E-mail:[email protected] http://www.lccert.com Page 4 of 36Report No.:LCZE1503003701 4General Information 4.1 Client Information Applicant: Elec-Tech International Co., Ltd. Address of Applicant:No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guangdong Province, P.R. China Manufacturer: Elec-Tech International Co., Ltd. Address of Manufacturer:No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou District, Zhuhai City, Guang…
Text truncated - open the document above for the full version.
Radiated Emission Conducted Emissions
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 63.97 mW |

Remote control
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Shoplight audio lighting
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Motion Sensor
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Motion Sensor
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
FLUSH MOUNT CEILING LIGHT WITH MOTION SENSOR
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter