Y8PSSPIMB03Immobilizer

Immobilizer Model SSPIMB03 Photographs of Immobilizer Model SSPIMB03 (Representative) Appearances Top View Front View Side View Side View Printed Circuit Board Top View Bottom View NOTE: Design, shape, and/or color may be changed.

12. Approval Label

Immobilizer Model SSPIMB03 Photographs of Immobilizer Model SSPIMB03 (Representative) Appearances Top View Front View Side View Side View Printed Circuit Board Top View Bottom View NOTE: Design, shape, and/or color may be changed.

Test report No. : 31DE0258-HO-02-A Page : 1 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 RADIO TEST REPORT Test Report No. : 31DE0258-HO-02-A Applicant : Fuji Heavy Industries Ltd. Type of Equipment : Immobilizer Model No. : SSPIMB03 FCC ID : Y8PSSPIMB03 Test regulation : FCC Part 15 Subpart C: 2010 Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with above regulation. 4. The test results in this report are traceable to the national or international standards. 5. This test report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. Date of test: _________________________________ Representative test engineer: _________________________________ Keisuke Kawamura Engineer of WiSE Japan ULVerification Service Approved by: _________________________________ Shinya Watanabe Leader of WiSE Japan ULVerification Service MF058b (12.01.11) NVLAP LAB CODE: 200572-0 This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://www.ul.com/japan/jpn/pages/services/emc/about/ma rk1/index.jsp#nvlap December 1 and 2, 2010 Test report No. : 31DE0258-HO-02-A Page : 2 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ..................................................................................................... 3 SECTION 2: Equipment under test (E.U.T.) ........................................................................................ 3 SECTION 3: Test specification, procedures & results ........................................................................ 4 SECTION 4: Operation of E.U.T. during testing ................................................................................. 7 SECTION 5: Radiated emission (Fundamental and Spurious Emission) .......................................... 8 SECTION 6: -26dB Bandwidth ............................................................................................................ 10 SECTION 7: 99% Occupied Bandwidth ............................................................................................. 10 APPENDIX 1: Photographs of test setup ............................................................................................ 11 Radiated Emission ............................................................................................................................. 11 Worst Case Position .......................................................................................................................... 12 APPENDIX 2: Data of EMI test........................................................................................................... 13 Radiated Emission below 30MHz (Fundamental and Spurious Emission) ................................. 13 Radiated Emission above 30MHz (Spurious Emission) ................................................................. 14 -26dB Bandwidth and 99% Occupied Bandwidth ......................................................................... 15 APPENDIX 3: Test instruments .......................................................................................................... 16 Test report No. : 31DE0258-HO-02-A Page : 3 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : Fuji Heavy Industries Ltd. Address : 1-7-2, Nishishinjuku, Shinjuku, Tokyo, 160-8316 Japan Contact Person : Takashi Nishida SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Immobilizer Model No. : SSPIMB03 Serial No. : Refer to Section 4, Clause 4.2 Rating : DC5.0V Receipt Date of Sample : November 26, 2010 Country of Mass-production : Japan Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description Model: SSPIMB03 (referred to as the EUT in this test report) is the Immobilizer. Radio Specification Radio Type : Transceiver Frequency of Operation : 134.2kHz Modulation : ASK Method of Frequency Genenration : Oscillator circuit with Ceramic Resonator Antenna type : Coil Antenna Duty Cycle : up to 100 % Test report No. : 31DE0258-HO-02-A Page : 4 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2010, final revised on October 13, 2010 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.209 Radiated emission limits, general requirements FCC 15.31 (e) This EUT provides stable voltage (DC5.0V) constantly to RF Module regardless of input voltage. Therefore, this EUT complies with the requirement. FCC Part 15.203 Antenna requirement It is impossible for end users to replace the antenna, because the antenna is mounted inside of the vehicle. Therefore, the equipment complies with the antenna requirement of Section 15.203. 3.2 Procedures and results No. Item Test Pro…

Text truncated - open the document above for the full version.

Test report No. : 31DE0258-HO-02-A Page : 11 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 APPENDIX 1: Photographs of test setup Radiated Emission Photo 1 Photo 2 Test report No. : 31DE0258-HO-02-A Page : 12 of 16 Issued date : February 2, 2011 FCC ID : Y8PSSPIMB03 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Worst Case Position Below 30MHz Z-axis Above 30MHz Horizontal:X-axis / Vertical:X-axis X-axis Y-axis Z-axis