Y9E-IAD16001Digital Signage Media Appliance

XMP Hard P‐7300 dwar U 0 User MManuaal i Contents 1. Introduction 1 1.1. Package contents 1 1.2. Installation 1 1.3. Physical view 2 2. Technical Data 3 2.1. Specifications 3 i 1. Intro This do 1.1. P NOT I N 1.2. I Attach Attach Mou n built in Med Vel oduction ocument desc Package c NCLUDED: A U Installatio h wireless a h the wireless nting Option n VESA MIS‐D ia Player Unit lcro (2 sets) n cribes the har contents USB mouse is on ntenna s antenna as : [VESA Mo u 100 (100mmx (with dware of the required for s shown below unt] The playe x100mm) com AC Adapter h select powe XMP‐6200. system setup w, and then sc er can be atta mpatible moun r plug) crew antenna ached to moun nting flange(sc Wi‐Fi Ante a clockwise o nting posts on crew thread : enna nto the post. n the back of s M4) HDMI screens with t Cable the i 1.3. P Physi            Physical v ical features Reset butt USB ports f Power(gre HDMI 2.0 c Ethernet p Wireless a VESA mou n Micro SD c HDMI port DC input p Micro USB view (left to righ on to perform for USB conte en) and Statu connector for port for netwo ntenna post nt card slot t ort for ADB , An d ht in above il m factory reset ent update an s(orange) LE D digital video ork content up droid debug c lustration) t d configurati o D indicator and audio co m pdate onsole port on mbined outpuut i 2. Technical Data 2.1. Specifications XMP‐7300 Video format support POPAI Screen Media Standards S6 (MPEG‐1 SIF, 3Mbps CBR) S7 (MPEG‐1 480p, 10Mbps CBR) S8 (MPEG‐1 720p, 15Mbps CBR) S9 (MPEG‐2 480p, 6Mbps CBR) S10 (MPEG‐2 720p, 12Mbps CBR) S11 (MPEG‐4 AVC, 480p, 6Mbps CBR) S12 (MPEG‐4 AVC, 720p, 10Mbps CBR) E4 (VC‐1/WMV9, MP@ML, 720p) E7 (MPEG‐4 ASP, 480p, 10Mbps CBR) E8 (MPEG‐4 AVC, 1080p, 10Mbps CBR) H.265/HEVC Image format support POPAI Screen Media Standards S1 (JPEG 480p baseline) S2 (JPEG 720p baseline) S3 (JPEG 1080p baseline) E1 (PNG 24bpp+alpha, 480p) E2 (PNG 24bpp+alpha, 720p) E3 (PNG 24bpp+alpha, 1080p) Audio codec support POPAI Screen Media Standards S4 (MPEG L2 audio) S5 (MP3 audio, 320Kbps) Dynamic content W3C HTML5 (HTML, CSS, JavaScript) W3C SMIL 3.0 instructions (sub‐set) Physical I/O connectors HDMI 2.0 USB 2.0 x 2 RJ45 Ethernet port (Giga LAN) Wi‐Fi antenna port Micro USB for ADB Micro SD card slot Audio out (3.5mm Analog, S/PDIF) LED: Power(green)/Status(orange) Local storage 8 GB on‐board flash memory (up to 6 hrs of typical 720p video @ 3 Mbps) Micro SD card expansion slot Accessories AC adapter HDMI cable Wi‐Fi antenna Velcro ( 2 sets ) MicroSD card slot stopper/screw x1 DC jack protection stopper/screw x1 Power requirement 12V 1.5A DC Power consumption 7.5 W Environmental Top housing: 143.60x100.66x33.65mm (5.65x 3.96x1.32 inches) Base: 143.60x128.13x33.65mm (5.65x5.04x1.32 inches) Dimensions 167x118.8x24.5 mm ( 6.57x4.67x0.96 inches) Weight 500 g 1.10 lbs Safety UL/FCC/CE/CCC/C‐Tick/VCCI certified power supplies Certifications CE/FCC i Warra Fir Fir Me anty rmwa mwar dia Pla XMP One are U re vers ayers: ‐6200 ‐year limited User M sion – M parts & labor Manu – 1.2 MBR‐1100 ual 0 XMP‐73000 i Contents Firmware User Manual 4 1. Introduction 1 1.1. Features 1 2. Configuring the Player 1 2.1. System connections 1 2.2. Basic settings 2 2.3. Connect the player to your network 3 2.4. Time zone settings 7 2.5. Content settings 8 2.6. Player Information 9 2.7. Content configuration – AppStart 10 2.8. Content configuration – FailSafe 10 2.9. Content configuration – EasyPlay 10 2.10. Display settings 13 2.11. Sound settings 16 2.12. System configuration – Player name 17 2.13. System configuration – Security 18 2.14. System configuration – Time Server 18 2.15. System configuration – Scheduled reboot 19 2.16. System configuration ‐ Firmware update 19 2.17. System configuration – Expansion storage 20 2.18. System configuration ‐ Factory reset 22 2.19. System configuration – Power save 23 3. Content Management 23 4. Authoring in HTML5 23 5. Working with SMIL 23 5.1. Introduction 24 5.2. www.a‐smil.org for developers 24 6. Appendix: FAQ 24 1 3. Introduction This document describes the basic operation of the player and frequently asked questions. 3.1. Features This is a Full HD 1080p high definition digital signage player featuring industrial grade mechanical design and versatile open‐standard HTML5 and SMIL programmability.  Support for HTML5 widgets for dynamic content (W3C Widgets standard)  Industry leading W3C SMIL support for developers  Full HD 1080p hardware decoding of MPEG1/2/4, H.264, and VC‐1 media formats  Supports full POPAI Screen Media Formats Standards profiles S1 to S12, and E1 to E8  Multiple 3 rd party software solution compatibility 4. Configuring the Player 4.1. System connections If it is a media player, connect it to a monitor via an HDMI cable. If it is a signboard (with built‐in screen), no monitor is required. However, a signboard player can still be connected to a monitor via HDMI for larger display area. When using an HDMI connection, audio is sent along with video over the HDMI cable, so no additional cables are required. 1 Attach the AC power adapter to power on the unit. After approximately 15 seconds, the booting animation will be displayed on screen as shown below : 2 The boot‐up process takes approximately 40 seconds to complete. Troubleshooting Tips for media players The operation indicators light up, but no video is displayed on screen  Ensure that your video cable (HDMI) is securely connected. When using an HDMI connection, choose high quality, certified HDMI cables or try using shorter length cables  Check if your monitor is turned on and the correct video input source is selected 2 After boot‐up completes, player will stay in Basic settings menu if no content service has been configured (i.e. first boot‐up for brand new unit or after a factory reset).If you have already set content into the player, contents will play back automatically after 15 seconds after boot‐up. 4.2. Basic settings You must attach a USB mouse to the player…

Text truncated - open the document above for the full version.

IAdea Corporation Date: July 14, 2015 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: Y9E-IAD16001 To Whom It May Concern: This letter is to ascertain that IAdea Corporation Product IAD-16001, has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, 3F., No 33, Lane 77, Xing-ai Road., Neihu Dist, Taipei City. +886-2-2791-1110 / [email protected]

SCS-F18: Project and Product Certification Representative Authorization LetterPage 1 of 3Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date FromTo Initial Release (obsolete)1.01.0Nov-14-2006 Revised wording(obsolete)1.02.0Sept–25-2007 Updated company template(obsolete)2.03.0Jan-31-2012 Updated letter information (obsolete)3.04.0May-23-2014 Added FCC ID field (current)4.05.0Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization LetterPage 2 of 3Rev 5.0 IAdea Corporation 2015/07/07 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We,IAdea Corporationhereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Product description, model name):Digital Signage Media Appliance, IAD-16001 FCC ID:Y9E-IAD16001 Sincerely, Client’s signature Client’s name / titleWenny Wang / Product Manager Contact information / address 3F., No 33, Lane 77, Xing-ai Road., Neihu Dist., Taipei City 11469 , Taiwan. R.O.C. Tel: 886-2-2791-1110/ Fax: 886-2-2791-1170 2015/07/07 To: SIEMIC, Inc. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, IAdea Corporation hereby authorize SIEMIC, Inc. to act as Certification Body for certifying for the following project(s): (Product description, model name) FCC ID : Y9E-IAD16001 We affirm that between SIEMIC, Inc. and IAdea Corporation , any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client's signature �-/ _z)� Client's name I title Wenny �ng I Profuct Manager Contact information I address 3F., No. 33, Lane 77, Xing-ai Road., Neihu Dist., Taipei City 11469 , Taiwan. R.O.C. Tel: 886-2-2791-1110/Fax: 886-2-2791-1170 SCS-F18: Project and Product Certification Representative Authorization Letter Page 3 of 3 Rev 5.0 IAdea Corporation

SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 2015/07/07 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: Y9E-IAD16001 We hereby request confidential treatment o f information accompanying this application as outlined below: -Block Diagram -Schematics -Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title Wenny Wang / Product Manager Contact information / address 3F., No. 33 , Lane 77 , Xing-ai Road., Neihu Dist., Taipei City 11469 , Taiwan. R.O.C. Tel : 886-2-2791-1110/ Fax: 886-2-2791-1170 IAdea Corporation 2015/07/07 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: Y9E-IAD16001 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period ot 45 Dor 1ao rgJ days (p1easecheckone ) . User Manual Internal photo External photo - Test setup photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client's signature ;-J / I J4 Client's name I title Wenny w,ng I Proc(uct Manager Contact information I address 3F., No. 33, Lane 77, Xing-ai Road., Neihu Dist., Taipei City 11469, Taiwan. R.O.C. Tel: 886-2-2791-1110/ Fax: 886-2-2791-1170 SCS-Fl 9: Confidentiality Request Letter Page 3 of3 Rev 3.0 IAdea Corporation

Issue Date: Jun. 23, 2015 Page: 1 of 5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group PHOTOGRAPHS OF EUT All View of EUT Front View of EUT Issue Date: Jun. 23, 2015 Page: 2 of 5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 Issue Date: Jun. 23, 2015 Page: 3 of 5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 2 Side View of EUT – 3 Issue Date: Jun. 23, 2015 Page: 4 of 5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 4 Adapter-1(…

Text truncated - open the document above for the full version.

Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 107 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group MAXIMUM PERMISSIBLE EXPOSURE (MPE) Standard Applicable According to 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Com- mission’s guideline. This is a Mobile device, the MPE is required. According to 1.1310 and 2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 108 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Maximum Permissible Exposure (MPE) Evaluation Max. Rated Avg. Power + Max. Tolerance (± 0.92dBm): 15 dBm Frequency (MHz) Output Power (dBm) Output Power (mW) Limit (mW) 2412 14.06 25.47 1000 2437 14.08 25.59 1000 2462 14.07 25.53 1000 MPE Prediction (802.11b 2412~2462) Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4R 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum average output power at antenna input terminal: 15.00 (dBm) Maximum average output power at antenna input terminal: 31.6227766 (mW) Duty cycle: 100 (%) Maximum Pav : 31.6227766 (mW) Antenna gain (Maximum): 3.92 (dBi) Antenna gain (linear): 2.466039337 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2462 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm2) Power density at predication frequency at 20 (cm) distance 0.0155221 (mW/cm^2) Measurement Result The predicted power density level at 20 cm is 0.016 mW/cm 2 . This is below the uncontrolled exposure limit of 1 mW/cm 2 at 2437MHz. Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 109 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties …

Text truncated - open the document above for the full version.

Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 1 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: Digital Signage Media Appliance Brand Name: IAdea Corporation Marketing Name: XMP7 series Model No.: IAD-16001 Model Difference: N/A FCC ID: Y9E-IAD16001 Report No.: E2/2015/50045 Issue Date: Jun. 23, 2015 FCC Rule Part: §15.247, Cat: DTS Prepared for: IAdea Corporation 3F., No. 33 , Lane 77 , Xing-ai Road., Neihu Dist., Taipei City 11469 , Taiwan. R.O.C. Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.2, Keji 1st Rd., Guishan District, Taoyuan City, Taiwan 333 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This doc- ument may be altered or revised by SGS Taiwan Ltd. per- sonnel only, and shall be noted in the revision section of the document. Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 2 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE Applicant: IAdea Corporation 3F., No. 33 , Lane 77 , Xing-ai Road., Neihu Dist., Taipei City 11469 , Taiwan. R.O.C. Product Name: Digital Signage Media Appliance Brand Name: IAdea Corporation Marketing Name: XMP7 series Model No.: IAD-16001 Model Difference: N/A FCC ID: Y9E-IAD16001 File Number: E2/2015/50045 Date of test: May. 18, 2015 ~ Jun. 23, 2015 Date of EUT Received: May. 18, 2015 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2009 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits. The test results of this report relate only to the tested sample identified in this report. Test By: Date Jun. 23, 2015 Aken Huang / Engineer Prepared By: Date Jun. 23, 2015 Allen Tsai / Engineer Approved By: Date Jun. 23, 2015 Jim Chang / Asst. Manager Report No.: E2/2015/50045 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 3 of 116 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under …

Text truncated - open the document above for the full version.

Report No.: E2/2015/50047 FCC ID: Y9E-IAD16001 Issue Date: Jun. 23, 2015 Page: 1 of 63 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Clien…

Text truncated - open the document above for the full version.