YHEP2798AFM Transmitter

NOTE: Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The max. audio input signal is 500mV. The FCC ID/IC Certification number is affixed inside the battery compartment. You can find the numbers when inserting the battery

PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT REAR VIEW OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT LEFT VIEW OF THE PRODUCT RIGHT VIEW OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT TOP VIEW OF THE PRODUCT BTTOM VIEW OF THE PRODUCT

P2798_Bottom engraved artwork P/N: Body: Glossy black The texts will be engraved on bottom cabinet Convex:0.15mm Scale 1:1 2014.05.29 2014.07.04 Add FCC ID . A A A 1 . 5 V A A A 1 . 5 V 6 4 . 2 9 37.29 1 . 1 5 m m 15.54 mm

PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT BOTTOM VIEW PHOTOGRAPH OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT

STC Test Report Date: 2014-03-05 Page 1 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre Ltd. For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of Homepage. Applicant (ANH001): Ablelink Electronics Limited Flat 1004, 10/F, Kodak House II, 39 Healthy Street East, North Point, Hong Kong Description of Sample(s): Submitted sample(s) said to be Product: P2798 Brand Name: Griffin Model Number: P2798 FCC ID: YHEP2798A Date Sample(s) Received: 2014-02-26 Date Tested: 2014-02-27 to 2014-03-04 Investigation Requested: Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15: 2012 and ANSI C63.4: 2009 for FCC Certification. Conclusion(s): The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remark(s): --- LONG Yun Jian, Along Authorized Signatory ElectroMagnetic Compatibility Department For and on behalf of STC (Dongguan) Company Limited STC Test Report Date: 2014-03-05 Page 2 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage CONTENT: Cover Page 1 of 18 Content Page 2-3 of 18 1.0 General Details 1.1 Equipment Under Test [EUT] Page 4 of 18 Description of EUT operation 1.2 Date of Order Page 4 of 18 1.3 Submitted Sample(s) Page 4 of 18 1.4 Test Duration Page 4 of 18 1.5 Country of Origin Page 4 of 18 2.0 Technical Details 2.1 Investigations Requested Page 5 of 18 2.2 Test Standards and Results Summary Page 5 of 18 3.0 Test Results 3.1 Emission Page 6-10 of 18 3.2 Emission Bandwidth Page 11-14 of 18 STC Test Report Date: 2014-03-05 Page 3 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage Appendix A A description of the device Page 15 of 18 Appendix B List of Measurement Equipment Page 16 of 18 Appendix C Ancillary Equipment Page 16 of 18 Appendix D Photographs Page 17-18 of 18 STC Test Report Date: 2014-03-05 Page 4 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.0 General Details 1.1 Equipment Under Test [EUT] Description of Sample(s) Submitted sample(s) said to be Product: P2798 Manufacturer: ANFAIR ELECTRONICS PLASTIC FACTORY CHANGSANTOU VILLAGE, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA . Brand Name: Griffin Model Number: P2798 Rating: 3Vd.c. (“AAA” size battery x 2) 1.1.1 Description of EUT Operation The Equipment Under Test (EUT) is a P2798 of ANFAIR ELECTRONICS PLASTIC FACTORY. The transmitter is a manually operated transmitter. It is FM transmitter. Modulation by IC; and type is FM modulation. The maximum tuning range 88.1MHz-107.9MHz. 1.2 Date of Order 2014-02-26 1.3 Submitted Sample(s): 1 Sample 1.4 Test Duration 2014-02-27 to 2014-03-04 1.5 Country of Origin China STC Test Report Date: 2014-03-05 Page 5 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 2.0 Technical Details 2.1 Investigations Requested Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15: 2013 and ANSI C63.4: 2009 for FCC Certification. 2.2 Test Standards and Results Summary Tables EMISSION Results Summary Test Condition Test Requirement Test Method Class / Test Result Severity Pass Failed N/A Field Strength of Fundamental Emissions FCC 47CFR 15.239 ANSI C63.4: 2009 N/A Radiated Emissions FCC 47CFR 15.209 ANSI C63.4: 2009 N/A Emission Bandwidth FCC 47CFR 15.239 ANSI C63.4: 2009 N/A Note: N/A - Not Applicable STC Test Report Date: 2014-03-05 Page 6 of 18 No. : DM114382 T h e H o n g K o n g S t a n d a r d s a n d T e s t i n g C e n t r e L t d . 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 3.0 Test Re…

Text truncated - open the document above for the full version.

PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP