YIGDP-C02BBaby Monitor

User Manual DP-C02 Baby Monitor EN Attentions Warning Oriental Inspiration Limited reserves the right to the interpretation of the product and correlative contents. Please stop using the product if any abnormal phenomena. Please use neutral solvent to clean the blot, do not use organic solvent. Do not modify any accessories, or our company won't responsible for any malfunctions and calamities may cause. Do not put the product into fire, or our company won't responsible for any malfunctions and calamities may cause. Power supply accessories must be operated in the right way as user manual, or our company won't responsible for any malfunctions and calamites may cause. Class B digital device, pursuant to part 15 of the FCC Rules. These limits This equipment has been tested and found to comply with the limits for a are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC Hereby, Netop Industrial Co.Ltd declares that this device is in Part List 2 1 Contents 1 Product Overview 5 Warranty Terms and Conditions 4 Screen Display 3 Setup before Use 3 4 Specifications 5 Contents Product Overview Please check and confirm all the accessories are available before use. Parent Unit X 1 a Baby Unit x 1 b c d Main Unit x 1 Output：DC 6.0V= 500mA DP-C02 Baby Monitor -1- ※ ※ ※ ※ ※ ※ ※ ※ ※ meters (at line of sign).It is compact, lightweight,easy to setup and use. To guarantee all the functions into fully play and prolong the service specifications and the manual without prior notification. Thank you for buying our baby minitor 'DP-C02'.It enables you to see and hear your infant just about anywhere in your house within 300 life, please read the user manual carefully before installations and keep the product under well cleaning and maintenance. In line with the policy of continued development, if there are any amendments on the appearance,color or assemblies, please refer to the realobject.Our company reserves the right to amend on the Installations Parent Unit LED Indicators Adapter X 2 Part List 6 7 5 2 4 3 8 9 7 8 1 2 3 4 5 6 1 2 4 3 8 7 5 6 1.Parent Unit 2.Baby Unit -2- 1 LED Indication Red/Yellow/Blue/Green/Red) ( Up Down Enter Left Right DC Jack DC Jack Power switch (Up side is on / down side is off) Power switch (Up side is on / down side is off) Night Vision IR LED Power On LED indicators While disconnecting , hold on this key to pair BU and PU, till paired successfully , the release . While connecting, press this key to turn on/off night light. Microphone hole Night Light Red/Yellow) LED Indicators ( 1.8" Color TFT Display 128 x 160 Parent Unit LED Indicators Parent Unit Night Light Function Key 1 2 3 5 6 7 4 9 8 Setting Before Use 1. 2. * × 3 3 4 4 1 1 2 2 * × 1 2 3 4 5 4 + 1 6 7 8 9 12 10 11 -3- 2 Brightness setting: 5 levels adjustable 3 and thereis a smile face display on LCD. VOX function ON/OFF: While this VOX is on ,Parent unit will go to sleep mode to save power automatically , It can be powered on by Baby unit microphone , 9 Battery capacity *First time use the product, please pair baby unit and parent unit. Light press on parent unit <Enter> to enter into menu for data setting, all the data will be factory default if not set up. Press on <Enter> to enter into menu setting. Use <Up > or <Down > to select setting and then Use <Left > or <Right > to select setting. * After entering into menu, there are baby unit selection, brightness setting, VOX function on/off, and pairing function. Screen Display Menu Functions 1 Baby unit selection: Up to 4 baby units selectable, the selected baby unit number will display on the lower right corner. 4 Pairing function: Pair baby unit and parent unit, up to 4 baby units can be paired . 5 Enter : Enter / Quit Menu 6 Signal strength 7 Volume: Press on <Left > to volume down and press on <Right > to volume up. 8 Night light: Press on <Down > to turn on / off. 10 VOX function on 11 Zoom in / Out, press on <Up > to adjust to X2, X4 12 The paring baby unit no Yellow ON Working Status RedRed Green Blue ONONON ON ON ON ON ON ON FLASH FLASH OFFOFFOFFOFF OFF OFF OFF OFFOFFOFF OFFOFF OFF (Off under battery in full charge) 2. 1. * 3 4 12 -4- Installations Please enter into men…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1211C125 Page 2 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 3 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 4 of 10

Neutron Engineering Inc. Project No.: 1211C125 Page 5 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 6 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 7 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 8 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 9 of 10 Neutron Engineering Inc. Project No.: 1211C125 Page 10 of 10

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 1 of 65 FCC Radio Test Report FCC ID: YIGDP-C02B This report concerns (check one) : Original Grant Class II Change Issued Date : Dec. 26, 2012 Project No. : 1211C125 Equipment : Baby Monitor Model Name : DP-C02 (Camera) Applicant : NETOP INDUSTRIAL CO., LTD. Address : Dapu Industrial Zone, gangzi Village, Changping Town,Dongguan City, Guangdong, China Manufacturer : NETOP INDUSTRIAL CO., LTD. Address : Dapu Industrial Zone, gangzi Village, Changping Town,Dongguan City, Guangdong, China Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Nov. 20, 2012 Date of Test: Nov. 20, 2012 ~ Dec. 26, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 2 of 65 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 3 of 65 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 28 5 . NUMBER OF HOPPING CHANNEL 40 5.1 APPLIED PROCEDURES / LIMIT 40 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 40 5.1.2 TEST PROCEDURE 40 5.1.3 DEVIATION FROM STANDARD 40 5.1.4 TEST SETUP 40 5.1.5 EUT OPERATION CONDITIONS 40 5.1.6 TEST RESULTS 41 6 . AVERAGE TIME OF OCCUPANCY 42 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 4 of 65 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 42 6.1.1 MEASUREMENT INSTRUMENTS LIST 42 6.1.2 TEST PROCEDURE 42 6.1.3. TEST SETUP LAYOUT 42 6.1.4. TEST DEVIATION 42 6.1.5. EUT OPERATION DURING TEST 42 6.1.6. TEST RESULTS 43 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 46 7.1 APPLIED PROCEDURES / LIMIT 46 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 46 7.1.2 TEST PROCEDURE 46 7.1.3 DEVIATION FROM STANDARD 46 7.1.4 TEST SETUP 46 7.1.5 EUT OPERATION CONDITIONS 46 7.1.6 TEST RESULTS 47 8 . BANDWIDTH TEST 49 8.1 APPLIED PROCEDURES / LIMIT 49 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 49 8.1.2 TEST PROCEDURE 49 8.1.3 DEVIATION FROM STANDARD 49 8.1.4 TEST SETUP 49 8.1.5 EUT OPERATION CONDITIONS 49 8.1.6 TEST RESULTS 50 9 . PEAK OUTPUT POWER TEST 52 9.1 APPLIED PROCEDURES / LIMIT 52 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 52 9.1.2 TEST PROCEDURE 52 9.1.3 DEVIATION FROM STANDARD 52 9.1.4 TEST SETUP 52 9.1.5 EUT OPERATION CONDITIONS 52 9.1.6 TEST RESULTS 53 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 55 10.1 APPLIED PROCEDURES / LIMIT 55 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 10.1.2 TEST PROCEDURE 55 10.1.3 DEVIATION FROM STANDARD 55 10.1.4 TEST SETUP 55 10.1.5 EUT OPERATION CONDITIONS 55 10.1.6 TEST RESULTS 56 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 5 of 65 1. CERTIFICATION E q u i p m e n t : Baby Monitor Brand Name : OITEZ Model Name : DP-C02 (Camera) A p p l i c a n t : NETOP INDUSTRIAL CO., LTD. F a c t o r y : Netop Industrial Company Limited Address : Dapu Industrial Zone, gangzi Village, Changping Town,Dongguan City, Guangdong, China Date of Test : Nov. 20, 2012 ~ Dec. 14, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1211C125) were obtained utilizing the test procedures, test instruments, test sites th…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 62 of 65 10.1.7. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 63 of 65 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 64 of 65 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1211C125 Page 65 of 65 Radiated Measurement Photos