YIGDP-M12Digital microscope which connects to a PC via USB interface

尺寸: 297x400mm (折后尺寸: 99x200mm) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE ： THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

External Photos of DP-M12

Trademark FCC ID: YIGDP-M12 Model: DP-M12 Power: DC5V Manufacturer: Netop Industrial Company Limited : OiTEZ

Internal Photos of DP-M12

Report Number: 68.760.11.303.01 Page 1 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 FCC TEST REPORT Report Number : 68.760.11.303.01 Date of Issue: 17 November 2011 Model : DP-M12 Product Type : USB eScope Pro Applicant : Netop Industrial Company Limited Address : Dapu Industrial Zone, Gangzi Village, Changping Town, 523571 Dongguan City, Guangdong Province, P.R. China Production Facility : Netop Industrial Company Limited Address : Dapu Industrial Zone, Gangzi Village, Changping Town, 523571 Dongguan City, Guangdong Province, P.R. China Test Result :  Positive  Negative Total pages including Appendices : 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from Jiangsu TÜV Product Service Ltd. – Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.760.11.303.01 Page 2 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 1 Table of Contents 1 Table of Contents............................................................................................ 2 2 Details about the Test Laboratory..................................................................... 3 3 Description of the Equipment Under Test........................................................... 4 4 Summary of Test Standards............................................................................ 5 5 Summary of Test Results................................................................................ 6 6 General Remarks.......................................................................................... 7 7 Technical Requirements.............................................................................. 8 7.1 Conducted Emission AC Power Port........................................................ 8 7.2 Radiated emissions............................................................................ 12 8 System Measurement Uncertainty................................................................... 18 Report Number: 68.760.11.303.01 Page 3 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 2 Details about the Test Laboratory Details about the Test Laboratory Company name: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6th Floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District 518048, Shenzhen,P.R.C. Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Company name: Waltek Services (Shenzhen) Co., Ltd. 1/F, Fukangtai Building, Baima Road, Songgang, Baoan District Shenzhen, Guangdong China Telephone: 86 755 2755 3488 Fax: 86 755 2755 3868 Report Number: 68.760.11.303.01 Page 4 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 3 Description of the Equipment Under Test Description of the Equipment Under Test Product: USB eScope Pro Model no.: DP-M12 Options and accessories: NIL Rating: DC 5V, Less than 300mA Description of the EUT: NIL Auxiliary Equipment and Cable Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) Personal Computer Lenovo T4900V 0100640332 LCD monitor View Sonic VA521 922050101551 Keyboard Shuangfeiyan KB-3 - Mouse JEEJA M-01 - Report Number: 68.760.11.303.01 Page 5 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 4 Summary of Test Standards Test Standards FCC Part 15 Subpart B PART 15 - RADIO FREQUENCY DEVICES Subpart B - Unintentional Radiators Report Number: 68.760.11.303.01 Page 6 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart B Test Condition Pages Test Result Pass Fail N/A 15.107 Conducted Emission AC Power Port 8 15.109 Spurious radiated emissions 12 Report Number: 68.760.11.303.01 Page 7 of 18 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 6 General Remarks Remarks This submittal(s) (test report) is intended for FCC ID: YIGDP-M12 filing to comply with Sec…

Text truncated - open the document above for the full version.

Page 1 of 2 Test setup photos of DP-M12 1. Conducted Emission Test setup Front View Rear View Page 2 of 2 2. Radiated Emission Test Front View Rear View