YJV-VST400V300

Documentrevision:RevisionA(Draft) ImportantNotice Copyright©2020WatchGuard.Inc.Allrightsreserved.Thisdocumentandsupporting dataaretheexclusivepropertyofWatchGuard.Inc.andmaynotbecopiedand/or reproducedwithoutpermission. Softwareupdates WatchGuardiscommittedtothecontinualtestingandimprovementofoursoftware. Asnewsoftwarerevisionsbecomeavailable,theseupdateswillbemadeavailableto youragency;feesmayapplydependingonyourlicensingagreement. Manufacturercontactinformation WatchGuard.Inc. 415E.Exchange,Allen,TX75002-2616 CustomerService:1-800-605-6734 CustomerServicewebportal:https://support.watchguardvideo.com/ Sendusyoursuggestions Wewanttohearfromyou.Tellusaboutyourexperienceandhowyouareusingthe V300.Wewilldoourbesttoaccommodateanysuggestionsyoumayhaveinfuture revisions. Internationalcustomers,pleasecontactyourlocaldistributor. Trademarknotices BluetoothisaregisteredtrademarkofBluetoothSIG,Inc. Wi-Fiisatrademarkofthenon-profitWi-FiAlliance RAMisaregisteredtrademarkofNationalProductsInc.intheUnitedStatesand/or othercountries. iPhone®isatrademarkofAppleInc.,registeredintheU.S.andothercountries. SAMSUNGisatrademarkofSamsungGroup,SamsungElectronics,andit'slisted subsidiaries. OakleyandFlakJacket®aretrademarksorregisteredtrademarksofOakley,Inc.inthe U.S.andothercountries. Littelfuse®isaregisteredtrademarkofLittelfuse,Inc.intheUnitedStatesandother countries. SierraWireless®andAirLink®areregisteredtrademarksofSierraWireless. Allothermarks,names,andlogosmentionedhereinarethepropertyoftheir respectiveowners. RevisionRevisionA(Draft)WGD00169 FCC and IC notices This equipment complies with Part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). This equipment should only be used with the antenna supplied by WatchGuard Video. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. WatchGuard V300contains the following IDs: FCC ID: YJV-VST400 IC: 9073A-VST-400 WatchGuardWiFi basecontains the following IDs: FCC ID YJV-VST500 IC: 9073A-VST500 Cet appareil est conforme à la Partie 15 des règlements de la FCC et Industrie Canada exempts de licence standard RSS. Cet appareil doit être utilisé uniquement avec l'antenne fournie par WatchGuard Video. Tout changement ou modification non expressément approuvée par le fabricant pourrait annuler l'autorité de l'utilisateur de faire fonctionner l'appareil. WatchGuard V300contient les identifiants suivants: FCC ID: YJV-VST400 IC: 9073A-VST400 WatchGuard WiFi Basecontient les identifiants suivants: FCC ID YJV-VST500 IC: 9073A-VST500 The device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s) subject to the following two conditions: 1. The device may not cause harmful interference. 2. The device must accept all interference received, including interference that may cause undesired operation. Cet appareil est conforme à la Partie 15 des règlements de la FCC et Industrie Canada exempts de licence standard RSS soumis aux deux conditions suivantes: 1. Cet appareil ne peut causer des interférences nuisibles. 2. Cet appareil doit accepter toutes les interférences reçues, y compris les interférences qui peuvent perturber le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, cet émetteur radio ne peut fonctionner à l'aide d'une antenne d'un type et maximum (ou moins) Gain approuvé pour l'émetteur par Industrie Canada. Pour réduire le risque d'interférence avec d'autres utilisateurs, le type d'antenne et son gain doivent être choisis afin que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. The radio transmitters IC: 9073A-5 have been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type (radio transmitter): WatchGuard part number WGP02541, 4.6 dbi gain, 50 Ohm impedance. Ces émetteurs radios IC: 9073A-VST500 ont été approuvés par “Industry Canada” pour fonctionner avec les types d'antennes énumérés ci-dessous avec le gain maximal admissible et l'impédance d'antenne requise pour Revision Revision A (Draft)WGD00169 chaquetyped'antenneindiqué.Lestypesd'antennesnefigurantpasdanscetteliste,ayantungainsupérieur augainmaximumindiquépourcetype,sontstrictementinterditspouruneutilisationaveccetappareil. Typed'antenne(émetteurradio):WatchGuardVideopartnumberWGP02451,4.6dBigain,50Ohmimpedance. Theantennasusedforthistransmittermustnotbeco-locatedoroperatinginconjunctionwithanyother antennaortransmitter. Lesantennesutiliséespourcetémetteurnedoiventpasêtreco-Lesantennesutiliséespourcetémetteurne doiventpasêtreco-localiséesoufonctionnerconjointementavecuneautreantenneouunautreémetteur. ThisdevicecomplieswithHealthCanada’sSafetyCode.TheinstallerofthisdeviceshouldensurethatRF radiationisnotemittedinexcessoftheHealthCanada’srequirement.Informationcanbeobtainedat https://www.canada.ca/en/health-canada/services/environmental-workplace-health/reports- publications/radiation/safety-code-6-health-canada-radiofrequency-exposure-guidelines-environmental- workplace-health-health-canada.html CetappareilestconformeavecSantéCanadaCodedesécurité6.Leprogrammed’installationdecetappareil doits’assurerquelesrayonnementsRFn’estpasémisau-delàdel’exigencedeSantéCanada.Les informationspeuventêtreobtenues:https://w…

Text truncated - open the document above for the full version.

415 East Exchange Parkway Allen TX 75002 Toll Free (800) 605-6734. Main (972) 423-9777. Fax (972) 423-9778 www.WatchGuardVideo.com January 14, 2020 Cover Letter for FCC Application To Whom It May Concern: Enforcement Video, LLC (d.b.a. WatchGuard Video) is seeking FCC certification for their on-body camera, Model name V300. Element Materials Technology has been authorized as the FCC agent to carry out the submittal and certification process. The V300 contains a Murata LBEE5KL1DX chip (FCC ID : VPYLB1DX) which is a 2.4 GHz Wi-Fi and Bluetooth Module. The V300 uses 2.4 GHz WiFi and Bluetooth. The module does not have a built-in antenna. The device uses SISO configuration. We are seeking FCC approval using an off the shelf antenna under applicable rules of 47 CFR 15.247. The FCC ID will be YJV-VST400. Should you have any questions, please contact me. Signed Date: Jan 14, 2020 Navaid Karimi Sr. Staff Engineer WatchGuard Video 415 East Exchange Parkway Allen TX 75002 (469) 640-5217 [email protected]

February 6, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern, I hereby authorize Anthony Garcia of Murata Electronics to act on our behalf only for signing the Request for Confidentiality letter for this filing for FCC ID: YJV- VST400. The exhibits being held confidential are the intellectual property of Murata Electronics. This authorization is limited to only the signing of the Request for Confidentiality letter. This authorization shall expire 12 months from original date. Sincerely, Navaid Karimi Sr. Staff Engineer WatchGuard Video 415 East Exchange Parkway Allen TX 75002 +1 (469) 640-5217 [email protected]

415 East Exchange Parkway Allen TX 75002 Toll Free (800) 605-6734. Main (972) 423-9777. Fax (972) 423-9778 www.WatchGuardVideo.com January 14, 2020 FCC Request for Confidentiality To Whom It May Concern: FCC ID: YJV-VST400 Product Name: V300 Request is hereby submitted by Enforcement Video, LLC (d.b.a. WatchGuard Video) to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Block diagram • Operational/Technical Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signed Date: January 14, 2020 Navaid Karimi Sr. Staff Engineer WatchGuard Video 415 East Exchange Parkway Allen TX 75002 +1 (469) 640-5217 [email protected]

26.50 4X R2.38 2X 0.76 9.20 31.50 15.50 11.30 3.26 7.10 13.40 18.000 5.0 2.400 MODEL NUMBER UNIVERS CONDENSED 100% WIDTH SEE NOTE 5 7 POINT UNIVERS CONDENSED 100% WIDTH 0.26 MAX NOTES: ALL DIMENSIONS IN MILLIMETERS.1. MATERIAL: FLEXCON THERMLfilm 22970 SILVER MATTE WITH .003" MAXIMUM CLEAR GLOSS OVERLAMINATE.2. ARTWORK FOR LOGO TO BE PROVIDED BY WATCHGUARD.3. PRINTING TO BE BLACK ON BOTTOM, AND NON-PRINTED TEXT FOR REMAINDER (TEXT WILL BE SILVER).4. 2D BARCODE COMPLIES WITH ECC-200 AND ENCODES A 5-DIGIT PREFIX FOLLOWED BY A 6-DIGIT 5. SERIALIZATION REPRESENTED AS 123456, STARTING AT NUMER SPECIFIED BY WATCHGUARD PURCHASING. LABELS TO BE KISS CUT AND WEEDED TO RELEASE LINER AND PACKAGED IN ROLL FORM.6. QTY ON ROLL: 1,000. REVISIONS REV.DESCRIPTIONDATEAPPROVED AINITIAL PRODUCTION RELEASE, ECN 265809/13/2019J DULANEY B CHANGE OVERLAMINATE TO GLOSS, SHRINK SIZE, UPDATED FCC ID AND IC#, ECN 2631 01/14/2020J DULANEY WGA00625G2WEAR NEXT ASSEMBLYUSED ON APPLICATION SCALE : 4:1 SIZEDWG NO B OF REV DATE DRN CHK ENGR DES ENGR MGR Q.C. CAGE CODE 1 1 415 E. EXCHANGE PKWY ALLEN, TX 75002 DESCRIPTION B MFG/ PUR APPROVALS A-PROTO.06 ANGLES .XX .XXX PROPRIETARY INFORMATION THIS DRAWING AND SUPPORTING CAD DATA IS THE EXCLUSIVE PROPERTY OF WATCHGUARD, INC. AND MAY NOT BE COPIED AND/OR REPRODUCED WITHOUT PERMISSION .125 .080 .5 10/19/18 .. .. . . . . . SERIAL NUMBER LABEL, RECORDER, wgv_format_b_sht1.slddrt . Copyright © 2018 WATCHGUARD, INC. All rights reserved. PDM MODEL VERSION: J DULANEY UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS. DIMENSIONS AND TOLS PER ASME Y14.5M-2009 DIMENSIONAL LIMITS APPLY AFTER PROCESSES WGP02675 SHEET WGP02675 G2WEAR

Part No. M830320 Wi-Fi / BT / Zigbee Ceramic Antenna 2.4 GHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, Zigbee, WLAN, Smart Home, Healthcare, Digital Signage DATASHEET Part No. M830320 Product: Wi-Fi/Bluetooth Ceramic Antenna 11/15/2018Proprietary www.ethertronics.com Electrical Specifications Typical performance on a 40 x 60 mm PCB Mechanical Specifications & Ordering Part Number KEY BENEFITS Stay-in-Tune IMD antenna technology provides superior RF field containment, resulting in less interaction with surrounding components. Quicker Time-to-Market By optimizing antenna size, performance and emissions, customer and regulatory specifications are more easily met. Reliability Products are the latest RoHS version compliant. Ceramic Wi-Fi / Bluetooth Antenna 2400 –2485 MHz •Embedded design •Cellular, Headsets, Tablets •Gateway, Access Point •Handheld •Telematics •Tracking •Healthcare •M2M, Industrial devices •Smart Grid •OBD-II APPLICATIONS Ordering Part NumberM830320 Size (mm)8.0 x 3.0x1.3 MountingSurface mounted Weight (grams)0.2 Packaging Tape & Reel, M830320–1,000 pieces per reel Demo BoardM830320-01 Ethertronics’ series of Ceramic Isolated Magnetic Dipole™ (IMD) antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for Bluetooth ® enabled mobile devices. Real-World Performance and Implementation Ceramic antennas may look alike on the outside, but the important difference is inside. Other antennas may contain simple PiFAor monopole designs that interact with their surroundings, complicating layout and compromising performance. Ethertronicsantennas utilize patented IMD technology to deliver optimum performance in a miniature size configuration. Greater Flexibility Ethertronics’ first-in-class IMD technology enables you to develop designs that are more advanced and that deliver superior performance in reception critical applications. Frequency (MHz)2400 –2485 Peak Gain1.39 dBi Average Efficiency78% VSWR Match2.0:1 max Feed Point Impedance50 ohms unbalanced PolarizationLinear Power Handling0.5 Watt CW tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: [email protected] 5501 OberlinDrive, Suite 100 San Diego, CA 92121 -USA © 2018 Ethertronics Return Loss, Efficiency Plots Typical performance on 40 x 60 mm PCB Return LossEfficiency Antenna Radiation Patterns Typical performance on 40 x 60 mm PCB Measured @ 2440 MHz 2.4 GHz Ethertronics’ Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Y X Y Z X Z DATASHEET | Part No. M830320 tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: [email protected] 5501 OberlinDrive, Suite 100 San Diego, CA 92121 -USA © 2018 Ethertronics Antenna Dimensions Typical antenna dimensions (mm) PinDescription 1 Feed 2 Ground 3 DummyPad 4 Tuning Pad 5 DummyPad 6 DummyPad Part NumberA (mm)B (mm)C (mm) M8303208.0 ±0.23.0 ±0.21.33 ±0.1 DATASHEET | Part No. M830320 2.4 GHz Ethertronics’ Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Pin #1 Pin #2 Pin #3 Pin #4 Pin #5 Pin #6 C A B tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: [email protected] 5501 OberlinDrive, Suite 100 San Diego, CA 92121 -USA © 2018 Ethertronics 2.4 GHz Ethertronics’ Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. DATASHEET | Part No. M830320 Antenna Layout Typical layout dimensions (mm) Pin #1 Pin#Description 1 Feed 2 Ground 3 Dummy Pad 4 TuningPad 5 Dummy Pad 6 DummyPad Pin Descriptions Matching Network (Demo Board) ComponentValueTolerance P1 0ΩN/A 50Ω Transmission line *Actual matching values depend on customer design •Additional VIAS: Diam. 0.2mm to be placed around antenna, (no viason transmission lines). •Via holes must be covered by solder mask Pin #2 Pin #3 Pin #4 Pin #5 Pin #6 Antenna Outline P1 Antenna Outline 50ohm P1 tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: [email protected] 5501 OberlinDrive, Suite 100 San Diego, CA 92121 -USA © 2018 Ethertronics 2.4 GHz Ethertronics’ Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. DATASHEET | Part No. M830320 Antenna Layout Tips (General reference) Important, layout guidelines for correct operation of Ethertronics Ceramic Antennas. Please read guidelines below before laying out the antenna in a device. Figure 1 shows the typical antenna layout. Figure 2 shows Ethertronics’ antenna layout. ShortingpinFeedpin Antennatuningloop: •Theantennatuningloopisformedbythe PCBlayout. •Thefeedpinandshortingpinare combinedbecause itrequiresveryclose proximitytoachievemoreband-width. Figure2 Ethertronics Antenna Layout (Required) Figure1 Typical Antenna Layout Shortingpinandfeedpinaresharedin Ethertronicsceramicantennas Other Ethertronics tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: [email protected] 5501 OberlinDrive, Suite 100 San Diego, CA 92121 -USA © 2018 Ethertronics Antenna Demo Board Typical layout dimensions (mm) Part NumberA (mm)B (mm)C (mm) M830320-0160.040.026.0 A B A DATASHEET | Part No. M830320 2.4 GHz Ethertronics’ Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. C

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. WatchGuard Video V300 802.11bgn radio SAR Evaluation Report # WTVD0027.13 Evaluated to the following SAR specification: FCC 2.1093:2019 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 201049-0 CERTIFICATE OF TEST 2018-07-17 Last Date of Test: December 5, 2019 WatchGuard Video EUT: V300 Applicable Standard Test Description Specification Test Method Pass/Fail SAR Evaluation FCC 15.247:2019 FCC 2.1093:2019 FCC KDB 865664 D01 v01r04 FCC KDB 865664 D02 v01r02 FCC KDB 248227 D01 V02r02 FCC KDB 447498 D01 v06 IEEE Std 1528:2013 Pass Highest SAR Values: Frequency Bands (GHz) Body (W/kg) Limit (W/kg) Exposure Environment 1g 1g 2.4 0.06 1.6 General Population Deviations From Test Standards None Approved By: Don Facteau, Systems Architect Report No. WTVD0027.132/46 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. WTVD0027.133/46 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. WTVD0027.134/46 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. WTVD0027.135/46 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: WatchGuard Video Address: 415 East Exchange Pkwy City, State, Zip: Allen, TX 75002 Test Requested By: Navaid Karimi Model: V300 First Date of Test: August 11, 2019 Last Date of Test: December 5, 2019 Receipt Date of Samples: August 11, 2019 Equipment Design Stage: Production Equipment Condition: No Damage Purchase Authorization: Verified Information Provided by the Party Requesting the Test Functional Description of the EUT: The device is a chest-worn camera containing a combination radio modules with 802.11bgn and Bluetooth capability. The Bluetooth supports both BR/EDR and LE usage cases. FCC ID: YJV-VST400 Frequency Ranges: a) Bluetooth: 2402-2480 b) 802.11bgn: 2412-2462 (SISO, 20 MHz channel bandwidth) Location of transmit antenna(s): Report No. WTVD0027.136/46 PRODUCT DESCRIPTION 2014-12-10 Testing Locations Testing was performed on the front and the back side of the EUT. In normal operation the EUT will be mounted with the back side being closest to the human body. The EUT will sit in a chest mount assembly when in close proximity to the body for non-transient periods of time. It is not possible to mount the EUT to be seated in the chest mount assembly in any other orientations. The chest mount assembly contains metal. Testing was done with 0 cm of spacing between the chest mount assembly and the phantom. Simultaneous Transmission The EUT cannot simultaneously transmit from the 802.11bgn and Bluetooth radios. Testing Objective: To demonstrate compliance of the 802.11bgn radio with the SAR requirements of FCC 2.1093:2019. The RF exposure compliance of the Bluetooth radio is documented in a separate report, Element Report # WTVD0027.17. Scaling: Max Power: The EUT was transmitting near 100% duty cycle. Per FCC KDB 447498, the measured SAR values were scaled to the maximum tune-up tolerance limit. The results are referred to as the “Reported SAR” values. The following formula was used to calculate the linear SAR scaling factor: SAR scaling factor = 10^((Maximum Rated Power (dBm) - Measured Power (dBm)) / 10) 802.11bgn SAR scaling factor = 10^ (( 12.5 – 12.5 ) / 10) = 1.00 802.11bgn Test Reduction: The highest reported SAR for DSSS was adjusted by the ratio of OFDM to DSSS specified maximum output power. If this adjusted SAR is ≤ 1.2 W/kg, test exclusion app…

Text truncated - open the document above for the full version.

Report No. WTVD0027.1328/46 Report No. WTVD0027.1329/46 Report No. WTVD0027.1330/46 Report No. WTVD0027.1331/46 Report No. WTVD0027.1332/46 Report No. WTVD0027.1333/46 Report No. WTVD0027.1334/46 Report No. WTVD0027.1335/46

Report No. WTVD0027.1336/46 Report No. WTVD0027.1337/46 Report No. WTVD0027.1338/46 Report No. WTVD0027.1339/46 Report No. WTVD0027.1340/46 Report No. WTVD0027.1341/46 Report No. WTVD0027.1342/46 Report No. WTVD0027.1343/46 Report No. WTVD0027.1344/46 Report No. WTVD0027.1345/46 Report No. WTVD0027.1346/46

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT WatchGuard Video V300 FCC 2.1093:2020 Bluetooth & Bluetooth Low Energy Report # WTVD0027.17 NVLAP Lab Code: 200630 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: Tuesday, January 28, 2020 WatchGuard Video EUT: V300 RF Exposure Evaluation Standards Specification Method FCC 2.1093:2020 FCC 447498 D01 General RF Exposure Guidance v06 Results Method Clause Description Applied Results Comments 4.3.1 SAR Test Exclusion Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. WTVD0027.17EAR-Controlled Data2/9 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. WTVD0027.17EAR-Controlled Data3/9 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. WTVD0027.17EAR-Controlled Data4/9 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. WTVD0027.17EAR-Controlled Data5/9 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: WatchGuard Video Address: 415 East Exchange Pkwy City, State, Zip: Allen, TX 75002 Evaluation Requested By: Navaid Karimi EUT: V300 Date of Evaluation: Tuesday, January 28, 2020 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: The V300 is a body camera which can be paired with Bluetooth devices and WiFi access points. The V300 supports 802.11bgn, Bluetooth and Bluetooth Low Energy technology as standalone radios, with no simultaneous transmission capability. SAR measurements of the 802.11bgn radio are documented in Element report #WTVD0027.13. Objective: To demonstrate compliance with FCC RF exposure requirements for 2.1093 portable devices. Report No. WTVD0027.17EAR-Controlled Data6/9 RF Exposure Condition 2018-07-17 The following RF Exposure conditions were used for the …

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. WatchGuard Video V300 FCC 15.247:2019 Bluetooth Radio Report # WTVD0027.4 NVLAP LAB CODE: 201049-0 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is…

Text truncated - open the document above for the full version.