YJV-VST500WFB2

WGD00169 Revision Revision A (Draft) ii Important Notice Copyright © 2020 WatchGuard.Inc.All rights reserved.This document andsupporting data are the exclusive property of WatchGuard.Inc.andmay not be copiedand/or reproducedwithout permission. Software updates WatchGuardis committedto the continual testingandimprovement of our software. As new software revisions become available,these updates will be made available to your agency;fees may apply dependingon your licensingagreement. Manufacturer contact information WatchGuard.Inc. 415 E.Exchange,Allen,TX 75002-2616 Customer Service:1-800-605-6734 Customer Service webportal:https://support.watchguardvideo.com/ Send us your suggestions We want to hear from you.Tell us about your experience andhow you are usingthe V300.We will do our best to accommodate any suggestions you may have in future revisions. International customers,please contact your local distributor. Trademarknotices Bluetooth is a registeredtrademark of Bluetooth SIG,Inc. Wi-Fi is a trademark of the non-profit Wi-Fi Alliance RAM is a registeredtrademark of National Products Inc.in the UnitedStates and/or other countries. iPhone® is a trademark of Apple Inc.,registeredin the U.S.andother countries. SAMSUNG is a trademark of SamsungGroup,SamsungElectronics,andit's listed subsidiaries. Oakley andFlak Jacket® are trademarks or registeredtrademarks of Oakley,Inc.in the U.S.andother countries. Littelfuse® is a registeredtrademark of Littelfuse,Inc.in the UnitedStates andother countries. Sierra Wireless® andAirLink® are registeredtrademarks of Sierra Wireless. All other marks,names,andlogos mentionedherein are the property of their respective owners. iii WGD00169 Revision Revision A (Draft) FCC and IC notices This equipment complies with Part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). This equipment should only be used with the antenna supplied by WatchGuard Video. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. WatchGuard V300contains the following IDs: FCC ID: YJV-VST400 IC: 9073A-VST-400 WatchGuard WiFi base contains the following IDs: FCC ID: YJV-VST500 IC: 9073A-VST500 Cet appareil est conforme à la Partie 15 des règlements de la FCC et Industrie Canada exempts de licence standard RSS. Cet appareil doit être utilisé uniquement avec l'antenne fournie par WatchGuard Video. Tout changement ou modification non expressément approuvée par le fabricant pourrait annuler l'autorité de l'utilisateur de faire fonctionner l'appareil. WatchGuard V300 contient les identifiants suivants: FCC ID: YJV-VST400 IC: 9073A-VST400 WatchGuard WiFi Base contient les identifiants suivants: FCC ID: YJV-VST500 IC: 9073A-VST500 The device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s) subject to the following two conditions: 1. The device may not cause harmful interference. 2. The device must accept all interference received, including interference that may cause undesired operation. Cet appareil est conforme à la Partie 15 des règlements de la FCC et Industrie Canada exempts de licence standard RSS soumis aux deux conditions suivantes: 1. Cet appareil ne peut causer des interférences nuisibles. 2. Cet appareil doit accepter toutes les interférences reçues, y compris les interférences qui peuvent perturber le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, cet émetteur radio ne peut fonctionner à l'aide d'une antenne d'un type et maximum (ou moins) Gain approuvé pour l'émetteur par Industrie Canada. Pour réduire le risque d'interférence avec d'autres utilisateurs, le type d'antenne et son gain doivent être choisis afin que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. The radio transmitters IC: 9073A-5 have been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna type (radio transmitter): WatchGuard part number WGP02541, 4.6 dbi gain, 50 Ohm impedance. Ces émetteurs radios IC: 9073A-VST500 ont été approuvés par “Industry Canada” pour fonctionner avec les types d'antennes énumérés ci-dessous avec le gain maximal admissible et l'impédance d'antenne requise pour WGD00169 Revision Revision A (Draft) iv chaque type d'antenne indiqué. Les types d'antennes ne figurant pas dans cette liste, ayant un gain supérieur au gain maximum indiqué pour ce type, sont strictement interdits pour une utilisation avec cet appareil. Type d'antenne (émetteur radio): WatchGuard Video part number WGP02451, 4.6 dBi gain, 50 Ohm impedance. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Les antennes utilisées pour cet émetteur ne doivent pas être co- Les antennes utilisées pour cet émetteur ne doivent pas être co-localisées ou fonctionner conjointement avec une autre antenne ou un autre émetteur. This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at https://www.canada.ca/en/health-canada/services/environmental-workplace-health/reports- publications/radiation/safety-code-6-health-c…

Text truncated - open the document above for the full version.

Signed Date: Jan 29, 2020 January 29, 2020 To Whom It May Concern: Cover Letter for FCC Application Enforcement Video, LLC (d.b.a. WatchGuard Video) is seeking FCC certification for their WiFi based charger for on body camera, Model Name WFB2. Element Materials Technology has been authorized to carry out the submittal and certification process. WFB2 contains a Texas Instruments WL1837MOD, 2.4-GHz/5 GHz Wi-Fi, Bluetooth Module. The WFB2 uses only 2.4 GHz WiFi in the device. 5 GHz and Bluetooth are disabled and not functional. The module does not have a built-in antenna. We are seeking FCC approval using an off the shelf antenna under applicable rules of 47 CFR 15.247. The FCC ID will be YJV-VST500. WFB2 is functionally equivalent to WFB1 (FCC ID: YJV-VST300) with the addition of 802.11b modulation. The test report from the FCC ID: YJV-VST300 filing is submitted to support this application. Should you have any questions, please contact me. Navaid Karimi Sr. Staff Engineer WatchGuard Video 415 East Exchange Parkway Allen TX 75002 (469) 640-5217 [email protected] 415 East Exchange Parkway Allen TX 75002 Toll Free (800) 605-6734. Main (972) 423-9777. Fax (972) 423-9778 www.WatchGuardVideo.com

415 East Exchange Parkway Allen TX 75002 Toll Free (800) 605-6734. Main (972) 423-9777. Fax (972) 423-9778 www.WatchGuardVideo.com January 29, 2020 FCC Request for Confidentiality To Whom It May Concern: FCC ID: YJV-VST500 Product Name: WFB2 Request is hereby submitted by Enforcement Video, LLC (d.b.a. WatchGuard Video) to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Block diagram • Operational/Technical Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signed Date: January 29, 2020 Navaid Karimi Sr. Staff Engineer WatchGuard Video 415 East Exchange Parkway Allen TX 75002 +1 (469) 640-5217 [email protected]

20.32 50.50 5X R1.50 NOTES: (UNLESS OTHERWISE SPECIFIED) DRAWING PREPARED IN ACCORDANCE WITH ASME Y14.8-20091. ALL DIMENSIONS ARE IN MILLIMETERS2. OVERALL CUT TOLERANCE +/-0.25.3. MATERIALS: 4. BASE MATERIAL: 2.0 MIL FLEXCON THERMfilm 22970 SILVER MATE ADHESIVE: 0.85MIL 0.15 THICK ACRYLIC PSA 50# KRAFT RELEASE LINER PRINTING TO BE IN BLACK.5. INCREMENTAL SERIAL NUMBER WHERE INDICATED IN HUMAN READABLE AND 2D BARCODE STARTING AT 6. NUMBER SPECIFIED BY WATCHGUARD PURCHASING. 2D BARCODE COMPLIES WITH GS1 DATA MATRIX AND ENCODES A 5 DIGIT PREFIX (WFB2-) FOLLOWED BY A 6 7. DIGIT SERIALIZATION REPRESENTED AS XXXXXX AND SPECIFIED IN PURCHASE ORDER. CE MARKING COMPLIES WITH 93/68EEC OR EQUIVOLENT.8. FCC MARK SHALL BE AS SHOWN OR AS APPEARS IN 784748 D03 LABELING GUIDE.9. FONT: UNIVERS CONDENSED BOLD. WATCHGUARD IN 2.4. MODEL NUMBER, PRODUCT NAME, SERIAL NUMBER 10. AND ASSEMBLY PART NUMBER IN 1.8. FCC ID, IC NUMBERS AND ASSEMBLED IN USA IN 1.4. LABELS TO BE KISS CUT ON RELEASE LINER AND PACKAGED IN ROLL FORM.11. QUANTITIES PER ROLL IS 500 PIECES.12. REVISIONS REV.ECN #DESCRIPTIONDATEAPPROVED A2631INITIAL RELEASE08/18/19F. LARA SIZE TITLE DWG NO REV SCALE: 3:1 DO NOT SCALE DRAWINGSHEET 1 OF 1 THIRD ANGLE PROJECTION B WATCHGUARD 415 EAST EXCHANGE PARKWAY ALLEN, TEXAS 75002 USA WGP02736 A ENGINEER F. LARA DATE THIS DRAWING AND SUPPORTING CAD DATA ARE THE EXCLUSIVE PROPERTY OF WATCHGUARD, INC. AND MAY NOT BE COPIED OR REPRODUCED WITHOUT PRIOR WRITTEN CONSENT OF WATCHGUARD, INC. COPYRIGHT © 2019 WATCHGUARD, INC. 07/17/19 DIMENSIONS ARE IN MILLIMETERS. INTERPRET DIM AND TOL PER ASME Y14.5-2009. DIM AND TOL APPLY AFTER PROCESSES. ±0.3 ±0.13 ±0.080 ±0.5° .X .XX .XXX ANGLES GENERAL TOL DIA. 0 - 6.00 6.01 - 14.00 14.01 - 40.00 TOL ±0.05 ±0.08 ±0.10 HOLE DIA TOL AA BB 4 4 3 3 2 2 1 1 PDM DRW VERSION: A-PROTO.02 G2WEAR, WIFI BASE PRODUCT LABEL

PCTEL, Inc. WEB: www.antenna.com MOBILE ANTENNAS WGP02541 Low Profile Glass Mount Covert Antenna •Wideband operation (no field tuning required) •IP67 rated, overmolded design suitable for outdoor installations •Glass mount installation, inside or outside the vehicle •Low-profile design for covert applications Covert Wi-Fi Glass Mount Antenna This Wi-Fi dipole antenna is an excellent choice for 2.4 GHz Bluetooth, and Wi-Fi hotspot mobile or Industrial IoT networks requiring a discreet, low profile antenna solution. The overmolded indoor/outdoor rated antenna is tape mounted for maximum placement flexibility. It can be installed almost anywhere, including vehicle windows, factory floors, and utility cabinets. For compliance with FCC 15.203, this antenna can be used as a permissible change for a device qualified with a dipole type antenna with a peak gain of 4.6 dBi or higher, operating in the stated frequency range. Features WGP02541 STANDARD CONFIGURATION ModelMounting MethodCableConnector 3 ft RG316 WGP02541 Glass Mount (VHB Tape) Reverse Polarity SMA Male ELECTRICAL SPECIFICATIONS - RF ANTENNA ModelFrequency RangeNominal ImpedanceVSWRMaximum Power Peak Gain 50 Ohm≤2.0:110 watts < 4.6 dBi WGP02541 2.3-2.5 GHz MECHANICAL & ENVIRONMENTAL SPECIFICATIONS (ALL MODELS) DimensionsWeightHousing MaterialTemperature RangeIngress Protection* 2.25 L x .75 W x .17 D in (57.1 x 19 x 4.4 mm) .054 lbs (0.87 oz) Black, overmolded Polyamide thermoplastic -40°C to +85°C operating IP67 (except for the connector which must be routed inside of the vehicle) RoHS COMPLIANT 12

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT WatchGuard Video WFB2 FCC 2.1091:2020 802.11bgn Report # WTVD0028.7 NVLAP Lab Code: 200630 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: Monday, February 24, 2020 WatchGuard Video EUT: WFB2 RF Exposure Evaluation Standards Specification Method FCC 2.1091:2020 FCC 447498 D01 General RF Exposure Guidance v06 Results Method Clause Description Applied Results Comments 7.1 Maximum Permissible Exposure Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. WTVD0028.7EAR-Controlled Data2/9 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. WTVD0028.7EAR-Controlled Data3/9 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. WTVD0028.7EAR-Controlled Data4/9 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. WTVD0028.7EAR-Controlled Data5/9 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: WatchGuard Video Address: 415 East Exchange Pkwy City, State, Zip: Allen, TX 75002 Evaluation Requested By: Navaid Karimi EUT: WFB2 Date of Evaluation: Monday, February 24, 2020 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: The WFB2 (FCC ID: YJV-VST500) is an access point to pair with body cameras. Paired devices share trigger and time stamp information between each other and allow for group recordings to initiate. Objective: To demonstrate compliance with FCC requirements for RF exposure for 2.1091 mobile/fixed devices. Report No. WTVD0028.7EAR-Controlled Data6/9 RF Exposure Condition 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Mobile Location on Body (if applicable) NA How is the Device Used The WFB2 is used at a di…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. WatchGuard Video WFB2 FCC 15:247:2020 802.11bgn Report # WTVD0028.1 NVLAP LAB CODE: 201049-0 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: January 24, 2020 WatchGuard Video EUT: WFB2 Radio Equipment Testing Standards Specification Method FCC 15.247:2020 ANSI C63.10:2013, KDB 558074 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions No N/A Not required for a battery powered EUT. 11.6 Duty Cycle Yes Pass 11.8.2 Occupied Bandwidth Yes Pass 11.9.2.2.4 Output Power Yes Pass 11.9.2.2.4 Equivalent Isotropic Radiated Power Yes Pass 11.10.2 Power Spectral Density Yes Pass 11.11 Band Edge Compliance No N/A Not required for a single channel radio. 11.11 Spurious Conducted Emissions Yes Pass 11.12.1, 11.13.2, 6.5, 6.6 Spurious Radiated Emissions Yes Pass Deviations From Test Standards None Approved By: Jeremiah Darden, Operations Manager Report No. WTVD0028.12/39 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. WTVD0028.13/39 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. WTVD0028.14/39 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. WTVD0028.15/39 EMISSIONS MEASUREMENTS 2017.1.25 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document QM205.4.6. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) can be found included as part …

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. WatchGuard Video VISTA Wi-Fi Base FCC 15.247:2019 802.11gn SISO Radio Report # WTVD0015.1 Rev. 1 NVLAP LAB CODE: 201049-0 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: June 10, 2019 WatchGuard Video Model: VISTA Wi-Fi Base Radio Equipment Testing Standards Specification Method FCC 15.247:2019 ANSI C63.10:2013, KDB 558074 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions No N/A Not required for a battery powered EUT. 6.5, 6.6, 11.12.1, 11.13.3 Spurious Radiated Emissions Yes Pass 11.6 Duty Cycle Yes Pass 11.8.2 Occupied Bandwidth Yes Pass 11.9.1.1 Output Power Yes Pass 11.9.1.1 Equivalent Isotropic Radiated Power Yes Pass 11.10.2 Power Spectral Density Yes Pass 11.11 Band Edge Compliance Yes Pass 11.11 Spurious Conducted Emissions Yes Pass Deviations From Test Standards None Approved By: Jeremiah Darden, Operations Manager Report No. WTVD0015.1 Rev. 12/61 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None 01 Updated the Spurious Radiated Emissions graph y-axis to show all data points. 2019-07-31 14 Report No. WTVD0015.1 Rev. 13/61 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. WTVD0015.1 Rev. 14/61 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. WTVD0015.1 Rev. 15/61 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document QM205.4.6. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) can be found included as part of the applicable test description page. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 02…

Text truncated - open the document above for the full version.

XMit 2019.05.15 Direct Connect (1).JPG Direct Connect (2).JPG DIRECT CONNECT photo PSA-ESCI 2019.05.10 photos PSA-ESCI 2019.05.10 SRE (1).JPG SRE (2).JPG -2 SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2019.05.10 photos PS…

Text truncated - open the document above for the full version.