YPG-011813MEEP X2

C M Y CM MY CY CMY K 112233 4 4 556677 (a) Select your language and time zone (b) Choose an available Wi-Fi network on your MEEP!X2. If you skip this process, you can later visit the Settings page on the right hand menu bar to setup the Wi-Fi. (c) You can then choose to set up the parental controls on the MEEP!X2 (please refer to the “On-device parental settings” section for details). If you skip this process, you can tap on the “Parental Settings” icon on the left hand menu bar to set the parental controls. When new features and/or new functionalities are available, we will provide you with a software upgrade (Over the Air upgrade, known as OTA). We strongly recommend you proceed with it. Tap on the Games & Apps icon on the right hand menu bar of the MEEP!X2 and open the MEEP! OTA App. Tap on the ‘Download and install on the MEEP!’ button to download the OTA. You can also download the new SW upgrade through PC. Visit http://www.meeptablet.com/ota/ for details. If you need further assistance, please access the Online User Manual by tapping the Help icon on the right hand scroll menu and selecting User Manual or contact us at 1-800-853-8883. You can now enjoy the MEEP!X2 and its preloaded content! The following steps will help you setup your MEEP!X2 quickly for your child. 2 Make sure that your MEEP!X2 is connected to the internet by checking the blue Wi-Fi icon on the bottom right corner of the screen. In addition, make sure that the MEEP!X2 is connected to the adaptor before to proceed with the OTA update. 2 Press on the power button until the screen turns on. This may take a few seconds. 1 Start up your 111 1 Your MEEP!X2 will automatically reboot after the OTA installation. 222 How to do the OTA upgrade? 3 On-device Parental Settings 333 The MEEP!X2 must be registered by an adult in order for the child to gain online access. This is to ensure parents can set up the MEEP!X2 with as much restriction or allowance as they desire for their child. Please note that even if you don't set the parent controls, your MEEP!X2 will still be protected against improper usage (bad word ltering, black listed web sites). Make sure that your MEEP!X2 is connected to the internet. If you don’t own a parent account, select NO so that you can setup a new account. 1 2 Enter your personal information as well as your child information. 3 3 Open the conrmation email that has been sent to you to conrm your new account. 4 4 5 5 6 6 7 7 Remember to set your parental settings before leaving. If you already own a parent account, select YES so that you can synchronize the new MEEP!X2 to your account. Log into the Parental Settings and follow the dierent steps in order to set up the parental controls. You can also adjust the parental settings by (a) Visiting https://portal.meeptablet.com using a browser on PC, Mac ® , iPad ® which support html5. (b) Using our iOS TM or Android TM ‘MEEP! Together’ apps downloadable from the Apps Store SM and Google Play™. Enter your child’s information C M Y CM MY CY CMY K How to Connect the Microphone Connect the microphone (not included / sold separately) to the MEEP!X2 as shown. 1 How to Connect the Headphone Connect the headphone (not included / sold separately) to the MEEP!X2 as shown. 1 How to Handle Memory Cards Insert the memory card (Not included) into the memory card slot under the silicone skin of the MEEP!X2 1 The memory card is exchangeable with any other memory card up to 32 GB. Ask your parents to replace it by pressing the card. 2 How to charge Connect the adaptor to the MEEP!X2 as shown. 1 Ask your parents to plug the other end of the adaptor to a wall outlet. 2 If you charge the MEEP!X2 when it is ON, you should see a battery icon on the screen. 3 4 If you charge the MEEP!X2 when it is OFF, a charging icon will be shown on the screen promptly. Adaptor connected How to connect to a TV or a Display Ask your parents to connect a HDMI® cable (not included) to the MEEP!X2 before connecting it to a TV or a display that supports HDMI® functions. 1 Troubleshooting At Oregon Scientic, we are continually optimizing our information so as to bring the best possible experience. Every eort has been made to ensure the accuracy and appropriateness of the information behind the core of every product. Nonetheless, errors can sometimes occur. We stand behind our innovations, and we encourage you to call our Consumer Services Department with any problems and/or suggestions you might have. Our service representatives are always on hand to respond to your needs. For the most updated guidelines and support, please visit: http://www.meeptablet.com or contact us at our hotline below. Conforms to safety requirements of ASTM F963, EN71 Parts 1, 2 & 3 and EN62115. In an eort to continually improve our products, the actual screen display on the product may dier slightly from the diagrams shown. Please retain this quick start guide for future reference. Oregon Scientif i c, Inc. 19861 SW 95th Avenue Tualatin, OR 97062, USA Hotline: 1-800-853-8883 Service: http://us.oregonscientif i c.com/service Website: http://us.oregonscientif i c.com Warning: Changes or modif i cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Not suitable for children under 3 years as small parts may be generated. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed…

Text truncated - open the document above for the full version.

AM L 8726-MX S DUAL Cotex-A9 DC5V IN Battery Power PMU HDMI Micro-USB Headphone Speaker MIC TF-Card Interface KEY Power Reset Camera Back/ 2.0M Front/ 0.3M LCD LVDS Touch WIFI BT FLASH (4GB/8GB/16GB DD3 (512MB/1GB) Codec Host Device SDIO G-sensor Upgrade SDIO UART PCM GPIO ADC 24Mhz 32.768Khz 26Mhz
 BT Xcvr & BB Processor December 16, 2011 • 20710-DS106-R Page 10
Block Diagram BCM20710 Preliminary Data Sheet Figure 2: Functional Block Diagram ARM7TDMI-S DMA Scan JTAG Address Decoder Bus Arb Trap & Patch AHB2APB WD Timer Remap & Pause 32-bit APB 32-bit AHB AHB2MEM AHB2EBI External Bus I/F ROM 384 KB AHB2MEM RAM 112 KB PMU Control UART Debug UART PTU PMU LPO POR Buffer APU BT Clk/ Hopper Blue RF I/F Rx/Tx Buffer Digital Modulator Calibration & Control Digital Demod Bit Sync Bluetooth Radio RF Flash I/F JTAG DigitalI/O SPI/EMPSPI (Spiffy) I2C_Master Interrupt Controller PCM USB GPIO+Aux SW Timers JTAG Master LCU FIFO 1FIFO 2 OTP (128 bytes) SPIM SECI COEX Low Power Scan Blue RF Registers C O N F I DE N T IA L F O R G E M T E K T E C H N O L O G Y C O L T D 7/14/2011 B0QMR BCM43362 Overview BROADCOM IEEE 802.11 b/g/n MAC/Baseband/Radio + SDIO March 28, 2011 • 43362-DS102-RPage 11 ® BCM43362 Advance Data Sheet Section 1: BCM43362 Overview Overview The Broadcom® BCM43362 provides the highest level of integration for a mobile or handheld wireless system, with integrated IEEE 802.11 b/g/n. It provides a small form-factor solution with minimal external components to drive down cost for mass volumes and allows for handheld device flexibility in size, form, and function. The BCM43362 is designed to address the needs of highly mobile devices that require minimal power consumption and reliable operation. Figure 2 shows the interconnect of all the major physical blocks in the BCM43362 and their associated external interfaces, which are described in greater detail in the following sections. Figure 2: BCM43362 Block Diagram Backplane RAM (240 KB) ROM (448 KB) PMU Ctrl LPO SWREG LDO SLEEP CLK 2.4 GHz PA (Int) GPIO UART JTAG JTAG ARM processor SDIOD gSPI MAC Single-stream 802.11n PHY RADIO 802.11 b/g/n GPIO UART JTAG OTP WDog timer BT COEX EXT LNA/RF Switch Control Power supply SDIO/SPI POR WL_RST_N XTAL OSC Dedicated crystal or TCXO Always ON Buffer TCXO signal shared with BT/FM/GPS chip

INTERTEK TESTING SERVICE Report No.: 13061078HKG-001 FCC ID: YPG-0011813 Equipment Photographs Model: OP0118-13 (External)

PMS144C PMS427C PN#: Meep-CAB-FNT-1 Plastic Color: Black TPU Silkscreen Color: OS LOGO Meep -OP0118-13 DATE : 28-5-2013Silkscreen Specication 17.6mm 6mm PMS1565C PN#: Meep-CAB-REAR-1 Plastic Color: ORANGE1655U Silkscreen Color: 8.6mm 1.2mm FUNCTION LOGO PN#: Meep-CAB-FNT-1 Engrave ( FCC/CE/C TICK LOGO PN#: Meep-CAB-FNT-1 Engrave ( POWER / mic LOGO PN#: Meep-CAB-FNT-1 Engrave ( 6mm 4.2mm Meep -OP0118-13 DATE : 28-5-2013Silkscreen Specication

INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal) INTERTEK TESTING SERVICE Report No.: 13061080HKG-001 FCC ID: YPG-011813 Equipment Photographs Model: OP0118-13 (Internal)

Technical Description: The Equipment Under Test (EUT) is a tablet, equipped with HDMI, WiFi, Bluetooth 3.0 & 4.0 and SD Interface. The EUT operates in the frequency range from 2412MHz to 2462MHz at 802.11b,g,n HT20 (11 channels with 5MHz spacing) and The EUT operates in the frequency 2402MHz to 2480MHz at Bluetooth 3.0 (79 channels with 1MHz spacing) while 2402MHz to 2480MHz at Bluetooth 4.0 (40 channels with 2MHz spacing). The EUT is powered by an external AC/DC adaptor or USB 5.0VDC or / and 3.7 VDC (1 x 3.7V rechargeable battery). The adaptor accepts 100-120VAC only. An internal, integral antenna has been used. 1. WiFi & Bluetooth RF module (AP6210) AP6210 is a WLAN USB module which fully supports the features and functional compliance of IEEE 802.11b/g/n(HT20) and Bluetooth 3.0 and Bluetooth 4.0 standards. This module operates in 2.4GHz frequency bands. Ap6210 consists of: 1) U5 (BCM43362) is a single-chip IEEE802.11b/g/n(HT20) 1T1R WLAN controller. 2) U6 (BCM20710) is a single-chip Bluetooth 4.0 + EDR compliant processor. 3) Y3 is 26MHz crystal oscillator providing clock for U5 and U6. 2. Main Processor Portion 1) U1 (AML8726-MXS) is main processor. 2) Y1 is 24MHz crystal oscillator for U1. 3) Y2 is 32.768kHz crystal oscillator for U1. 3. Memory Portion 1) U5, U6, U7, U8 (H5TQ2G83EFR) are 2Gbit DDR3 memories. 2) U19 (TC58TEG5DCJTA00) is 4GB flash memory. 4. Video Portion 1) U26 and U28 (SPE6V8UDFN10RGB) is HDMI Transceiver. Average Power Specifications Time-averaged Output Power Operating Mode / Band Date Rate ChannelFreq. (MHz) Nominal (dBm) Maximum (dBm) 1 2412 6 2437 1Mbps 11 2462 1 2412 6 2437 2Mbps 11 2462 1 2412 6 2437 5.5Mbps 11 2462 1 2412 6 2437 IEEE 802.11b (2.4GHz) 11Mbps 11 2462 +13.0 dBm +13.5 dBm 1 2412 6 2437 6Mbps 11 2462 1 2412 6 2437 9Mbps 11 2462 1 2412 6 2437 12Mbps 11 2462 +13 dBm +13.5 dBm 1 2412 6 2437 18Mbps 11 2462 1 2412 6 2437 24Mbps 11 2462 +11.5 dBm +12 dBm 1 2412 6 2437 36Mbps 11 2462 1 2412 6 2437 48Mbps 11 2462 1 2412 6 2437 IEEE 802.11g (2.4GHz) 54Mbps 11 2462 +9.5 dBm +10 dBm Time-averaged Output Power Operating Mode / Band MCS Index ChannelFreq. (MHz) Nominal (dBm) Maximum (dBm) 1 2412 6 2437 MCS0 11 2462 1 2412 6 2437 MCS1 11 2462 1 2412 6 2437 MCS2 11 2462 +12 dBm +13 dBm 1 2412 6 2437 MCS3 11 2462 1 2412 6 2437 MCS4 11 2462 +10.5 dBm +11.5 dBm 1 2412 6 2437 MCS5 11 2462 1 2412 6 2437 MCS6 11 2462 1 2412 6 2437 IEEE 802.11n (HT20) (2.4GHz) MCS7 11 2462 +8.5 dBm +9.5 dBm Time-averaged Output Power Operating Mode / Band Channel Freq. (MHz) Nominal (dBm) Maximum (dBm) 0 2402 19 2440 Bluetooth 4.0 LE 39 2480 +7 dBm +8 dBm 0 2402 39 2441 Bluetooth 78 2480 -6 dBm -5 dBm AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 正基科技股份有限公司 SPECIFICATION SPEC. NO.： REV： 1.2 DATE： 12. 26.2012 PRODUCT NAME： AP6210 APPROVED CHECKED PREPARED DCC ISSUE NAME AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: AMPAK AP6210 WiFi 802.11b/g/n + BT4.0 SIP Module Spec Sheet AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 1 Revision History Date Revision Content Revised By Version 2012/09/18 - Preliminary Bart 1.0 2012/09/25 - Modify Pin Definition Bart 1.1 2012/12/26 - Modify Pin name 10,11 Brian 1.2 AP6210 Datasheet AMPAK Technology Inc. www.ampak.com.tw Proprietary & Confidential Information Doc. NO: 2 Contents Contents ................................................................................................................... 2 1. Introduction ......................................................................................................... 3 2. Features ............................................................................................................... 4 3. Deliverables ........................................................................................................ 5 3.1 Deliverables .................................................................................................... 5 3.2 Regulatory certifications ................................................................................. 5 4. General Specification ......................................................................................... 6 4.1 General Specification ...................................................................................... 6 4.2 Voltages .......................................................................................................... 6 4.2.1 Absolute Maximum Ratings .................................................................... 6 4.2.2 Recommended Operating Rating ........................................................... 6 5. WiFi RF Specification ......................................................................................... 7 5.1 2.4GHz RF Specification ................................................................................. 7 6. Bluetooth Specification ...................................................................................... 9 6.1 Bluetooth Specification ................................................................................... 9 7. Pin Assignments ............................................................................................... 10 7.1 Pin Outline .................................................................................................... 10 7.2 Pin Definition ................................................................................................ 10 8. Dimensions ....................................................................................................... 12 8.1 Physical Dimensions..................................................................................... 12 8.2 Layout Recommendation .............................................................................. 13 9. External clock reference .................................................................................. 14 9.1 SDIO Pin Description ....................…

Text truncated - open the document above for the full version.

Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. ADD:1606/C6 , Hengfeng Industry Building, Baoan District, ShenZhen, China Email:[email protected] TEL:86-755-27474071FAX: 86-755-29976316 SPECIFICATIONS FOR APPROVAL Customer Name:IDT(万威) Product Name:WIFI天线 Product Model:0P0118-13 Part Number:N12-1104-R0A Write By :戴小燕 Issued Date:2013-05-14 CUSTOMER ENGINEER R&D DEPTBUSSINESS DEPTAPPROVED BY SOUTHSTAR R & D D E P TENGINEER R&D DEPTAPPROVAL Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. 目录 Index 一、 封面（Cover）··············································· 1 二、 目录 （ Index ）·············································· · 2 三、 规格（ Product Specification ）··································· 3 四、 工程图纸（ Product Drawing ）·································· 4 五、 测试设备（ Test Equipment & Conditions ）··················· ··· 5 六、 性能测试报告（ Test Report ）··································· 6 七、 天线图片（ Antenna Picture ）·································· 7 Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. Product Specification A. Electrical Characteristics Frequency2400 MHz ~2500 MHz VSWR< 2 @ 2400 MHz ~ 2500 MHz Efficiency>60% Impedance50 Ohm PolarizationLinear Gain3dbi B. Material & Mechanical Characteristics Material of RadiatorFPCB yellow Cable Type￠1.13mm black Connector Type Dimension C. Environmental Operation Temperature- 30 ̊C~+80 ̊C Storage Temperature- 30 ̊C~+85 ̊C dBi Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. Test Equipment & Conditions 1．Network Analyzers: Agilent 8753D 5071B 2 ． Communications Test Set: Agilent E5515C 3 ． 3D Chamber Test System Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. Antenna Impedance:S11 & Smith Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. Total Efficiency: 0 10 20 30 40 50 60 70 80 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 GAIN: 0 0.5 1 1.5 2 2.5 3 3.5 4 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Shenzhen South Star Technology Co., LTD South Star Proprietary & Confidential © 2010 South Star Corporation. All rights reserved. Antenna Type:

Report No.: 13061148HKG-001 Page 1 of 81 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Specific Absorption Rate (SAR) Evaluation Report For MEEP!X2 Model Number: OP0118-13 Brand Name: Oregon Scientific FCC ID: YPG-011813 Test Report: 13061148HKG-001 Date of Report: 16 August 2013 Prepared for Oregon Scientific Global Distribution Limited Block C, 9/F.,Kaiser Estate, Phase 1, 41 Man Yue Street., Hunghom, Kowloon, Hong Kong Prepared and Checked by: Approved by: Chan Chun Foo, Bike Senior Lead Engineer Date: 16 August, 2013 Nip Ming Fung, Melvin Assistant Manager Date: 16 August, 2013 2349 Report No.: 13061148HKG-001 Page 2 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Information.............................................................................................. 3 2.0 Measurement System Description and Procedure ............................................. 10 3.0 Tissue Verification .............................................................................................. 18 4.0 SAR Measurement System Verification ............................................................. 19 5.0 SAR Evaluation .................................................................................................. 21 6.0 Test Instruments ................................................................................................ 29 7.0 Measurement Uncertainty .................................................................................. 30 8.0 E-Field Probe and 2450 Dipole Antenna Calibration.......................................... 30 9.0 References ......................................................................................................... 30 APPENDIX A - System Verification Data .................................................................. 31 APPENDIX B - SAR Evaluation Data ....................................................................... 32 APPENDIX C - E-Field Probe and 2450MHz Dipole Antenna Calibration Data ....... 34 APPENDIX D - SAR Tissue Specification ................................................................ 80 APPENDIX E - SAR System Validation.................................................................... 81 Report No.: 13061148HKG-001 Page 3 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1.0 General information 1.1 Test Result Summary Applicant : Oregon Scientific Global Distribution Limited Applicant Address : Block C, 9/F., Kaiser Estate, Phase 1, 41 Man Yue Street., Hunghom, Kowloon, Hong Kong Model : OP0118-13 Brand Name : Oregon Scientific EUT Description : MEEP!X2 Exposure Category : General Population/Uncontrolled Exposure Test Device : Production Unit Date of Sample Received : 24 June, 2013 Date of Test: : 23 July, 2013 Date of Report: : 16 August, 2013 Place of Testing : Intertek Testing Services Hong Kong 5/F Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong Environmental Conidtions: : Temperature: +20 to 25°C Humidity: 30 to 70% Test Specification : ANSI/IEEE C95.1: 1992 IEEE Std 1528: 2003 IEEE Std 1528a: 2005 FCC KDB Publication 248227 D01 v01r02 FCC KDB Publication 447498 D01 v05r01 FCC KDB Publication 865664 D01 v01r01 FCC KDB Publication 865664 D02 v01r01 FCC KDB Publication 616217 D04 v01r01 The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: For Standalone transmission, Highest Reported SAR Band Operating Mode TX Frequency (MHz) 1 g Head 1g Body 2.4GHz IEEE 802.11b Data 2412 - 2462 N/A 0.174 W/kg For Simultaneous transmission Highest Reported SAR Operating Mode Measured WLAN SAR Estimated Bluetooth SAR Simultaneous SAR 2.4GHz WLAN + Bluetooth 0.174 W/kg 0.265 W/kg (Estimated) 0.439 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Report No.: 13061148HKG-001 Page 4 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1.2 Description of Equipment under test (EUT) EUT Description : MEEP!X2 Model : OP0118-13 Brand Name : Oregon Scientific FCC ID : YPG-011813 Serial Number : N/A Manufacturer : Same as Applicant Manufacturer Address : Same as Applicant Device dimension (L x W) : 196 (mm) x 135 (mm) Device thickness : 16 (mm) Operating Configuration(s) / mode : Body (Data Transmission) RF Exposure Condition(s) …

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES Back 0mm Separation Right 0mm Separation

INTERTEK TESTING SERVICES Page 1 of 1 EUT Photo Figure 1 - front view Figure 2 - back view

55 44 33 22 11 D D C C B B A A SCL1SDA1 TCKTMSTDITDO RTC_XTORTC_XTI XI TDOTDI TMSTCK X0 VDD_3V3_AO AVDD2V5 HDMI_3V3 AVDD2V5 VDD_CORE VDD_3V3 VCC1V2_A0 VDD_3V3_AO VDD_3V3_AO VDD_3V3 VDD_3V3 VDD_CORE AVDD2V5 PWRRTC GND AVDD2V5 AVDD2V5 GND VDD_3V3 OTG_VBUS AVDD2V5 VCC1V2_A0 GND GND HDMI_3V3 VDD_3V3 LCD_3V3_ON 6 OTG_VBUSEN 9,12 PMU_IRQn 12 XI XO RTC_XTI RTC_XTO SDA1 6,10 SCL1 6,10 I2C_SDA2 7,8 I2C_SCL2 7,8 BL_ADJ 6 nRESET 12 I2C_SDA_PMU 12 I2C_SCL_PMU 12 I2C_SDA2 7,8 I2C_SCL2 7,8 HW01 KEY_IN 8 LCD_PWMON 6 UART_TXD0 8 UART_RXD0 8 I2C_SCL_PMU 12 I2C_SDA_PMU 12 SD_CD 9 5V_ENABLE 12 SD_CLK 9 SD_CMD 9 SD_D3 9 SD_D0 9 SD_D2 9 SD_D1 9 nPENIRQ 6 XOXI CAM0_PWDN 10 CAM1_PWDN 10 GSEN_INT 8 VGHL_CS1 12 OTG_ID 9 OTG_DP 9 OTG_DM 9 RTC_XTORTC_XTIPWR_KEY 12 I2S_DOUT 7 I2S_BCLK 7 I2S_MCLK 7 I2S_LRCK 7 I2S_DIN 7 LCD_CS 6 Touch_RST 6 HDMI_SCL 9 HDMI_HPD 9 HDMI_CECHDMI_SDA 9 HDMI_CKP 9 HDMI_TX1N 9 HDMI_TX0P 9 HDMI_TX0N 9 HDMI_CKN 9 HDMI_TX2P 9 HDMI_TX2N 9 HDMI_TX1P 9 HDMI_CEC HDMI_CECI 9 CAM_PWREN 10 BT_PCM_SYNC 11 BT_PCM_CLK 11BT_PCM_IN 11 BT_PCM_OUT 11 WIFI_PWREN 11 LCD_B2 6 LCD_B3 6 LCD_B4 6 LCD_B5 6 LCD_B6 6 LCD_B7 6 LCD_G2 6 LCD_G3 6 LCD_G4 6 LCD_G5 6 LCD_G6 6 LCD_G7 6 LCD_R2 6 LCD_R3 6 LCD_R4 6 LCD_R5 6 LCD_R6 6 LCD_R7 6 LCD_VS 6 LCD_CLK 6 LCD_DE 6 LCD_HS 6 LCD_RESET 6 TP_UART_TX 8 TP_UART_RX 8 TP_DEBUG_DATA 8 HW01 HP_DET 3 WIFI_SD_CLK 8 WIFI_SD_CMD 8 WIFI_SD_D0 8 WIFI_SD_D1 8 WIFI_SD_D2 8 WIFI_SD_D3 8 WIFI_32K 8 WIFI_WAKE 8 UART_A_RTS_N 8 UART_A_RX 8 UART_A_TX 8 UART_A_CTS_N 8 BT_EN [8] NFC_EN [7] CARD_EN 9 TP_PWR_EN 6 ECO No. DesignerReviewedApproved DO NOT REPRODUCE FOR INTERNAL USE ONLY SCHEMATIC Size Date: Title: Sheet of Rev. Drawing No. Http: www.emdoor.com A1 Monday, May 27, 2013 V1 13 3 ECO No. DesignerReviewedApproved DO NOT REPRODUCE FOR INTERNAL USE ONLY SCHEMATIC Size Date: Title: Sheet of Rev. Drawing No. Http: www.emdoor.com A1 Monday, May 27, 2013 V1 13 3 ECO No. DesignerReviewedApproved DO NOT REPRODUCE FOR INTERNAL USE ONLY SCHEMATIC Size Date: Title: Sheet of Rev. Drawing No. Http: www.emdoor.com A1 Monday, May 27, 2013 V1 13 3 CARD_EN TSXM0 I2C_1:For Touch Panel & Touch KEY & CAMERA I2C_2:For Sensor IR MAIN CLKRTC CLK (0 0) 3G_WAKEOUTVCC_SAVE#SYS_LED USB HOST TSYP0TSXP0TSYM0 3G_PWREN AUDIO_PAEN Reserved for BT_RST Reserved for BT_EN U1A AML8726-MXS U1E AML8726-MXS U1D AML8726-MXS TP4 TP_0_5MM TP4 TP_0_5MM C91C0402 0.1uF/16V C91C0402 0.1uF/16V R8 200R/1% R0402 R8 200R/1% R0402 R28R04021K2/5%R28R04021K2/5% R23 R0402 22R/5% R23 R0402 22R/5% C27C0402 0.1uF/16V C27C0402 0.1uF/16V C52 C0402 15pF/50V C52 C0402 15pF/50V C48C0402 0.1uF/16V C48C0402 0.1uF/16V Q2SOT_23MI2302 NC Q2SOT_23MI2302 NC 2 3 1 R21 R0402 1M/5%0402 R21 R0402 1M/5%0402 R35 R04026.2M/5% NC R35 R04026.2M/5% NC TP1 TP_0_5MM TP1 TP_0_5MM R211 1.5K/1% R0402 R211 1.5K/1% R0402 R20 R0402 1K/5% R20 R0402 1K/5% C36C0402 2.2uF/10V C36C0402 2.2uF/10V C32 C04021uF/6.3V C32 C04021uF/6.3V Y2 GX7015-0.032NXM1251 SMD7X1_5X1_5 Y2 GX7015-0.032NXM1251 SMD7X1_5X1_5 R36 R0402 10K/5% NC R36 R0402 10K/5% NC C87 C04021uF/6.3V C87 C04021uF/6.3V C9 C0402 10PF/50V NC C9 C0402 10PF/50V NC C8C0402 1nF/16V C8C0402 1nF/16V TP11 TP_0_5MM TP11 TP_0_5MM TP3 TP_0_5MM TP3 TP_0_5MM C34C0402 0.1uF/16V C34C0402 0.1uF/16V C39 C0402 0.1uF/16V C39 C0402 0.1uF/16V R2 560R/1% R0402 R2 560R/1% R0402 C54 C04021uF/6.3V C54 C04021uF/6.3V C37 C04020.1uF/16V C37 C04020.1uF/16V C14C0402 0.1uF/16V C14C0402 0.1uF/16V R17 0R/5% R0603 R17 0R/5% R0603 R103 R0402100R/5% R103 R0402100R/5% C49C0402 0.1uF/16V C49C0402 0.1uF/16V R32 R0402 22R/5% R32 R0402 22R/5% C1C0402 2.2uF/10V C1C0402 2.2uF/10V R10 200R/1% R0402 NC R10 200R/1% R0402 NC R25R0402680R/5%R25R0402680R/5% C47C0402 0.1uF/16V C47C0402 0.1uF/16V C16C0805 10uF/10V C16C0805 10uF/10V C56C040215pF/50VC56C040215pF/50V R24R0402680R/5%R24R0402680R/5% C40C0402 0.1uF/16V C40C0402 0.1uF/16V R26R04021K2/5%R26R04021K2/5% R30 R0402 10K/5% NC R30 R0402 10K/5% NC C35C0402 0.1uF/16V C35C0402 0.1uF/16V R16R04021K/5%R16R04021K/5% R15R04021K/5%NCR15R04021K/5%NC C53C040220pF/50VC53C040220pF/50V TP2 TP_0_5MM TP2 TP_0_5MM C95C0402 0.1uF/16V C95C0402 0.1uF/16V C106 C0402 0.1uF/16VC106 C0402 0.1uF/16V R19 R0402 0R/5% R19 R0402 0R/5% Y1 GX321S-24.000KKZ1201 TCXO_3225 Y1 GX321S-24.000KKZ1201 TCXO_3225 1 2 3 4 R27R04021K2/5%R27R04021K2/5% C86C04021uF/6.3VC86C04021uF/6.3V R22 R0402100R/5% R22 R0402100R/5% C44 C04020.1uF/16V C44 C04020.1uF/16V C57C040215pF/50VC57C040215pF/50V C28C0402 0.1uF/16V C28C0402 0.1uF/16V TP10 TP_0_5MM TP10 TP_0_5MM R29R04021K2/5%R29R04021K2/5% R14R0402 10K/5% R14R0402 10K/5% 55 44 33 22 11 D D C C B B A A DRAM_D25 DRAM_A13 DRAM_A12DRAM_A0DRAM_A1DRAM_A9DRAM_A10DRAM_A2DRAM_A11DRAM_A3DRAM_A4DRAM_A5DRAM_A6 DRAM_D23DRAM_D22 DRAM_A7DRAM_A8 DRAM_D18DRAM_D17DRAM_D16DRAM_D21DRAM_D19DRAM…

Text truncated - open the document above for the full version.