Z2HMS100Digitx Mushroom Bluetooth Speaker

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

DATE：April 26, 2013 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint SHENHEN Shenzhen HCT Technology Co.,Ltd. / Room104， Number3，Lane14，Shangshatangyan Village, Futian District, Shenzhen _,. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with ADDON Technology / 1F.,NO.14,Ln.,53,Sec.4,XinYi Rd.,TaiPei,Taiwan Dated this April 26, 2013 Agency agreement expiration date: Usually Give 8 - 12 Months By: Chi-Liang Chen Signature Printed Title: CTO On behalf of : ADDON Technology Telephone: +886-2-2706-9692

DATE : April 26, 2013 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_ Z2HMS100__ Product Name:_ Digitx/Mushroom Bluetooth Speaker __ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this April 26, 2013 Agency agreement expiration date: Usually Give 8 - 12 Months By: Chi-Liang Chen Signature Printed Title: CTO On behalf of : ADDON Technology Telephone: +886-2-2706-9692

Statement DATE : April 26, 2013 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:_Z2 HMS100__ Product Name:_ Digitx/Mushroom Bluetooth Speaker __ We ADDON Technology Hereby confirm that The Model numbers of Mushroom , BT-100, BT-200 and MS-100A are all identical in interior structure, electrical circuits and components, and just model names and appearance color are different for the marketing requirement. Dated this April 26, 2013 Agency agreement expiration date: Usually Give 8 - 12 Months By: Chi-Liang Chen Signature Printed Title: CTO On behalf of : ADDON Technology Telephone: +886-2-2706-9692

Mark Location: FCC ID Label Location

RF Exposure Applicable Standard According to §1.1307(b)(5), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. This is a Portable device. The Section 4.3.1 and Appendix A of KDB447498 D01 V05 was used as the guidance. Calculation Result (Worse Case): [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] =0.84/5 * 1.6= 0.3, this value is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. The SAR measurement is not necessary.

Report No. : HCT1304069FCC Applicant: ADDON Technology Product: Digitx/Mushroom Bluetooth Speaker Model No: Mushroom, BT-100, MS-100A, BT-200 Trademark: N/A Test Standards: FCC Part 15 Subpart C, Paragraph 15.247 Test result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4&FCC Part 15 Subpart C, Paragraph 15.247 regulations for the evaluation of electromagnetic compatibility Approved By Eric Lin Manager Dated: April 25, 2013 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at Shenzhen HCT Technology Co.,Ltd. Room104，Number3，Lane14，Shangshatangyan Village, Futian District, Shenzhen Report No: HCT1304069FCC Page 2 of 81 Date: 2013-04-25 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the. Shenzhen HCT Technology Co.,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the Shenzhen HCT Technology Co.,Ltd . to his customer. Supplier or others persons directly concerned. Shenzhen HCT Technology Co.,Ltd . will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The Shenzhen HCT Technology Co.,Ltd . reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 3 1.1 Applicant Details.............................................................................................. 3 1.2 Description of EUT .......................................................................................... 3 1.3 Submitted Sample............................................................................................. 3 1.4 Test Duration.................................................................................................... 3 1.5 Test Uncertainty.................................................................................................3 1.6 Test By.......................................................................................................... 3 2.0 List of Measurement Equipment......................................................................... 4 3.0 Technical Details............................................................................................. 5 3.1 Summary of Test Results..................................................................................... 5 3.2 Test Standards.................................................................................................. 5 4.0 Test Lab Details ............................................................................................... 5 5.0 Power Line Conducted Emission Test...................................................................... 6 5.1 Schematics of the Test........................................................................................ 6 5.2 Test Method and Test Procedure............................................................................ 6 5.3 Configuration of the EUT.................................................................................... 6 5.4 EUT Operating Condition....................................................................................7 5.5 Conducted Emission Limit................................................................................... 7 5.6 Test Result...................................................................................................... 7 6.0 Radiated Emission test...................................................................................... 10 6.1 Test Method and Test Procedure............................................................................ 10 6.2 Configuration of the EUT.................................................................................... 10 6.3 EUT Operation Condition....................................................................................10 6.4 Radiated Emission Limit..................................................................................... 11 7.0 20dB Bandwidth Measurement............................................................................... 19 8.0 Maximum Peak Output Power............................................................................... 32 9.0 Carrier Frequency Separation............................................................................... 34 10.0 Number of Hopping Channel................................................................................ 38 11.0 Time of Occupancy (Dwell Time).......................................................................... 42 12.0 Out of Band Measurement................................................................................... 55 13.0 Antenna Requirement........................................................................................ 68 14.0 RF Exposure................................................................................................... 69 15.0 FCC Label...................................................................................................... 70 16.0 Photo of Test Setup and EUT View......................................................................... 71 Report No: HCT1304069FCC Page 3 of 81 Date: 2013-04-25 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the. Shenzhen HCT Technology Co.,Ltd. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client t…

Text truncated - open the document above for the full version.

Conducted Emissions: Emission Radiated test View