Z5JREACH-EQ823RMID

FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested when worn on the body, as described in this user guide, is 0.198 W/Kg(Body-worn measurements dier among phone models, depending upon available accessories and FCC requirements). While there may be dierences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on le with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: Z5JREACH-EQ823R Additional information on Specic Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value for this model phone when tested when worn on the body is 0.497W/Kg. Ce dispositif est conforme aux normes autoriser-exemptes du Canada RSS d'industrie L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Cet équipement est conforme avec l'exposition aux radiations IC dénies pour un environnement non contrôlé. L'utilisateur nal doit respecter les instructions de fonctionnement spéciques pour satisfaire la conformité aux expositions RF. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou transmetteur.Ces exigences dénissent la valeur SAR limite à 1.6 W / kg en moyenne par gramme de tissu.La valeur SAR la plus élevée pour ce modèl…

Text truncated - open the document above for the full version.

68-6~8609-Z698):auoqdala pn "0:) (uθωe!χ)Lpθ'1Hο3 :JO Jleqaquo Jamenb:am palu μd Uθ/oe!xuel :tfg OZ-H-~OZ:alepUO!le!dxaluawaa6e JUa6 OZ-H-~OZ S!ql paleσ 3 80019£')WC!X'IICd acOSpeOM11uenDM#YOE-MEihplIh03(uame!X) q;}a~H:)VIDIliM sap!saJ!lS :>UI epeue80ωaNAq pa pads·se UO!le:>Ja:> JOj SUO!l!PUO:>pue sωJala!M OU!Aldω0:>JOj Al!l!q!suodsaJlie le l aopaIMou:>e I 'jle aq Jno uo UO!le:>!μa:>JOJUO!le:>dde al SUO!Sluaoepazpolne mo aJaM sa:>uelsu!JO 'UO!le:>!lddeS!!M leoJddeJOJpan!ωqnsle Olle:>!lUap!laqele l! Ol pax!.ueaeII!M SUO!lelnoaJsUOlsslωsuolle:>lun leJapaal U! pau!Japse pala JeωJOpaμodω!paJnpejnueωl!unea le l AJ!a:>oSle I 'l4onosS! UO!le:>!J!a:>luaωd!nbaM JOJwalsAsJOa:>!ap al aq!J:>sap ApadoJdsluaωn:>oppaωqnsle l Aj!a:> I 'uO!le:>!J!μa:>luaωd!nbaJOj UO!le:>dde S!l JOUO!leJedaJdal U!luaoeJno se pe Ol 'oue a:>nJ8!BUf4J'llllOPllUBO 'u~4zu~4S P! S!G UBOBa PBOllUB!X!XlBd IB!llSnpul'CONllUOPOB'z llU!Pl!na'J- oN Ola 'looI.:!lSI :'pn"08OU!lSa1oueJueNue!fouoZ ua4zua4SlU!oddeI JIq Jno uO luaO se P0l AllJ nn UO!le:>98 JOJopaJ!O:un ZH~ epeue8'opeluo'eMeno peo~Ja£0£ :>UIepeue80ωaN OZ-~~-£~OZ:310 ·PIl'·O~(uaωe!x):>a1H~"3

Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 56 of 66 8 EUT Constructional Details Exterior Photo Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 57 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 58 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 66

Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 66 Interior photo Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 66 Report No: CCIS14030010801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 66 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS14040010901 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: REACH Tech (Xiamen) Co., Ltd. Address of Applicant: RM.303, #18, Guanri Road, Software Park II, Xiamen, 361008, China Equipment Under Test (EUT) Product Name: Smart Phone Model No.: EQ823R FCC ID: Z5JREACH-EQ823R Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 17 April., 2014 ~ 29 April., 2014 Test Result: Maximum Reported 1-g SAR Body: 0.198 W/kg Report No: CCIS14040010901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140400109RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 109 2 Version Version No. Date Description 00 30 April., 2014 Original Prepared by: Date: 30 April., 2014 Report Clerk Reviewed by: Date: 30 April., 2014 Project Engineer Report No: CCIS14040010901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140400109RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 109 3 Contents 1 COVER PAGE ................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 CONTENTS ....................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ............................................................................................................................. 5 5 GENERAL INFORMATION .............................................................................................................................. 6 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 6 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 6 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 7 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 7 5.5 TEST LOCATION ............................................................................................................................................................................. 7 6 INTRODUCTION ............................................................................................................................................... 8 6.1 INTRODUCTION ............................................................................................................................................................................... 8 6.2 SAR DEFINITION ............................................................................................................................................................................ 8 7 RF EXPOSURE LIMITS .................................................................................................................................... 9 7.1 UNCONTROLLED ENVIRONMENT ..................................................................................................................................................... 9 7.2 CONTROLLED ENVIRONMENT ......................................................................................................................................................... 9 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................... 9 8 SAR MEASUREMENT SYSTEM ................................................................................................................... 10 8.1 E-FIELD PROBE ........................................................................................................................................................................... 11 8.2 DATA ACQUISITION ELECTRONICS (DAE) .................................................................................................................................... 11 8.3 ROBOT ..............................................................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS14030010803 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT (WIFI) Applicant: REACH Tech (Xiamen) Co., Ltd. Address of Applicant: RM.303, #18, Guanri Road, Software Park II, Xiamen, 361008, China Equipment Under Test (EUT) Product Name: MID Model No.: EQ823R FCC ID: Z5JREACH-EQ823R Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 12 Mar., 2014 Date of Test: 21 Mar., to 13 May., 2014 Date of report issued: 13 May., 2014 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 72 2 Version Version No. Date Description 00 13 May.,2014 Original Prepared by: Date: 13 May.,2014 Report Clerk Reviewed by: Date: 13 May.,2014 Project Engineer Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 72 3 Contents Page 1 COVER PAGE ................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 CONTENTS ....................................................................................................................................................... 3 4 TEST SUMMARY .............................................................................................................................................. 4 5 GENERAL INFORMATION .............................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE ............................................................................................................................ 7 5.4 LABORATORY FACILITY.......................................................................................................................................... 7 5.5 LABORATORY LOCATION ....................................................................................................................................... 7 5.6 TEST INSTRUMENTS LIST ....................................................................................................................................... 8 6 TEST RESULTS AND MEASUREMENT DATA ............................................................................................. 9 6.1 ANTENNA REQUIREMENT: ...................................................................................................................................... 9 6.2 CONDUCTED EMISSION ....................................................................................................................................... 10 6.3 CONDUCTED OUTPUT POWER ............................................................................................................................ 13 6.4 OCCUPY BANDWIDTH .......................................................................................................................................... 17 6.5 POWER SPECTRAL DENSITY ............................................................................................................................... 24 6.6 BAND EDGE ......................................................................................................................................................... 28 6.6.1 Conducted Emission Method ..................................................................................................................... 28 6.6.2 Radiated Emission Method ......................................................................................................................... 30 6.7 SPURIOUS EMISSION ........................................................................................................................................... 43 6.7.1 Conducted Emission Method ..................................................................................................................... 43 6.7.2 Radiated Emission Method .................…

Text truncated - open the document above for the full version.

Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 72 Vertical : Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 37 of 72 Test channel: Highest Horizontal : Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 72 Vertical: Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 72 802.11n (H20) Test channel: Lowest Horizontal: Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 72 Vertical: Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 41 of 72 Test channel: Highest Horizontal: Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 42 of 72 Vertical: Remark: 1. Final Level =Receiver Read level + Antenna Factor + Cable Loss – Preamplifier Factor 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 72 6.7 Spurious Emission 6.7.1 Conducted Emission Method Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: ANSI C63.4:2003 and KDB558074 Limit: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Test setup: Test Instruments: Refer to section 5.6 for details Test mode: Refer to section 5.3 for details Test results: Passed Test plot as follows: Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 44 of 72 Test mode: 802.11b Lowest channel 30MHz~25GHz Middle channel 30MHz~25GHz A Offset 0.5 dB LVL * 3DB RBW 100 kHz SWT 2.5 s * VBW 300 kHz Att 20 dB * Ref 10 dBm MAXH 1 PK Start30 MHzStop25 GHz2.497 GHz/ -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] 1.31 dBm 2.377180000 GHz 2 Delta 2 [T1 ] -43.83 dB -1.747900000 GHz 3 Delta 3 [T1 ] -52.44 dB 11.336380000 GHz Date: 20.MAR.2014 23:10:19 A Offset 0.5 dB LVL * 3DB RBW 100 kHz SWT 2.5 s * VBW 300 kHz Att 20 dB * Ref 10 dBm Start30 MHzStop25 GHz2.497 GHz/ MAXH 1 PK -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] 0.42 dBm 2.427120000 GHz 2 Delta 2 [T1 ] -42.03 dB -1.747900000 GHz 3 Delta 3 [T1 ] -50.63 dB 11.236500000 GHz Date: 20.MAR.2014 23:10:50 Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 45 of 72 Highest channel 30MHz~25GHz Test mode: 802.11g Lowest channel 30MHz~25GHz A Offset 0.5 dB LVL * 3DB RBW 100 kHz SWT 2.5 s * VBW 300 kHz Att 20 dB * Ref 10 dBm Start30 MHzStop25 GHz2.497 GHz/ MAXH 1 PK -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] 0.48 dBm 2.427120000 GHz 2 Delta 2 [T1 ] -41.79 dB -1.747900000 GHz 3 Delta 3 [T1 ] -51.09 dB 11.286440000 GHz Date: 20.MAR.2014 23:11:19 A Offset 0.5 dB LVL * 3DB RBW 100 kHz SWT 2.5 s * VBW 300 kHz Att 20 dB * Ref 10 dBm Start30 MHzStop25 GHz2.497 GHz/ MAXH 1 PK -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -2.91 dBm 2.377180000 GHz 2 Delta 2 [T1 ] -48.60 dB -1.747900000 GHz 3 Delta 3 [T1 ] -47.95 dB 13.683560000 GHz Date: 20.MAR.2014 23:13:52 Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 46 of 72 Middle channel 30MHz~25GHz Highest channel 30MHz~25GHz A Offset 0.5 dB LVL * 3DB RBW 100 kHz SWT 2.5 s * VBW 300 kHz Att 20 dB * Ref 10 dBm Start30 MHzStop25 GHz2.497 GHz/ MAXH 1 PK -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1 Marker 1 [T1 ] -0.37 dBm 2.427120000 GHz 2 Delta 2 [T1 ] -50.99 dB 12.834580000 GHz 3 Delta 3 [T1 ] -53.30 dB -1.747900000 GHz Date…

Text truncated - open the document above for the full version.

Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 72 of 73 7 Test Setup Photo Radiated Spurious Emission Report No: CCIS14030010803 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300108RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 73 of 73 Conducted Emission 8 EUT Constructional Details Reference to the test report No. CCIS14030010801 ------End of report------