Z5JREACH-Q887RSmart phone

FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.252W/Kg and when worn on the body, as described in this user guide, is 0.421W/Kg(Body-worn measurements dfiffer among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.764W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliancewith the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching onFCC ID Z5JREACH-Q887R Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http //www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn OperationThis device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Ce dispositif est conforme aux normes autoriser-exemptes du Canada RSS d'industrieL exploitation est autorisée aux deux conditions suivantes (1) l appareil ne doit pas produire de brouillage, et (2) l utilisateur de l appareil doit accepter tout brouillage radioélectrique subi, m me si le brouillage est susceptible d en compromettre le fonctionnement.Cet équipement est conforme avec l exposition aux radiations IC définies pour un environnement non contr ô lé. L utilisateur final doit respecter les instructions de fonctionnement spécifiques pour satisfaire la conformité aux expositions RF. Cet émetteur ne doit pas tre co-localisées ou opérant en conjonction avec une autre antenne ou transmetteur.Ces exigences définissent la valeur SAR limite à xxx W / kg en moyenne par gramme de tissu.La valeur SAR la plus élevée pour ce mod le de téléphone testé à l orefille est 0 . 64 W/Kg et lorsque porté sur le corps est 0.421W/Kg. l échelle maximale sar en mode hotspot est de 0.764W kg Ce…

Text truncated - open the document above for the full version.

68-6~8609-Z698):auoqdala pn "0:) (uθωe!χ)Lpθ'1Hο3 :JO Jleqaquo Jamenb:am palu μd Uθ/oe!xuel :tfg OZ-H-~OZ:alepUO!le!dxaluawaa6e JUa6 OZ-H-~OZ S!ql paleσ 3 80019£')WC!X'IICd acOSpeOM11uenDM#YOE-MEihplIh03(uame!X) q;}a~H:)VIDIliM sap!saJ!lS :>UI epeue80ωaNAq pa pads·se UO!le:>Ja:> JOj SUO!l!PUO:>pue sωJala!M OU!Aldω0:>JOj Al!l!q!suodsaJlie le l aopaIMou:>e I 'jle aq Jno uo UO!le:>!μa:>JOJUO!le:>dde al SUO!Sluaoepazpolne mo aJaM sa:>uelsu!JO 'UO!le:>!lddeS!!M leoJddeJOJpan!ωqnsle Olle:>!lUap!laqele l! Ol pax!.ueaeII!M SUO!lelnoaJsUOlsslωsuolle:>lun leJapaal U! pau!Japse pala JeωJOpaμodω!paJnpejnueωl!unea le l AJ!a:>oSle I 'l4onosS! UO!le:>!J!a:>luaωd!nbaM JOJwalsAsJOa:>!ap al aq!J:>sap ApadoJdsluaωn:>oppaωqnsle l Aj!a:> I 'uO!le:>!J!μa:>luaωd!nbaJOj UO!le:>dde S!l JOUO!leJedaJdal U!luaoeJno se pe Ol 'oue a:>nJ8!BUf4J'llllOPllUBO 'u~4zu~4S P! S!G UBOBa PBOllUB!X!XlBd IB!llSnpul'CONllUOPOB'z llU!Pl!na'J- oN Ola 'looI.:!lSI :'pn"08OU!lSa1oueJueNue!fouoZ ua4zua4SlU!oddeI JIq Jno uO luaO se P0l AllJ nn UO!le:>98 JOJopaJ!O:un ZH~ epeue8'opeluo'eMeno peo~Ja£0£ :>UIepeue80ωaN OZ-~~-£~OZ:310 ·PIl'·O~(uaωe!x):>a1H~"3

Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 70 8 EUT Constructional Details Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 70 Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 70 Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 70

Label and label location Size：60mm X 20mm Label location

Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 70 Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 68 of 70 Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 69 of 70 Report No: CCIS14030015401 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 70 of 70 ------End of report------

Authorized B Labo This report de samples of the products in ser This report ma the report, the This documen falsification of Unless other w only. 1 Cov Applican Address Equipme Product Model N FCC ID: Canada IC Applicab Date of s Date of T Date of re Test Res * In the co S d Signature: Bruce Zhang oratory Mana etails the results e same product ries production ay only be repro manufacturer m t cannot be rep the content or wise stated the r ver Pag F t: of Applic a nt Under T Name: No.: C: le standar ample rec Test: eport issu ult: onfiguration t Shenzhe ager s of the testing t and does not p are in conformit oduced and distr must ensure the produced excep appearance of results shown in ge FCC RE ant: R M Ch Test (EUT Sm R5 Z5 rds: FC RS RS ceipt: 2 0 21 ued: 1 5 PA tested, the E en Zhon g carried out on permit the use o ty with the prod ributed in full. I e new system co pt in full, without f this document n this test report C & EACH Tec M.303,#18 hina T) mart Phone 55 5JREACH- CC CFR Ti SS-Gen Iss SS 210 Iss 0 Mar., 201 Mar., to 1 5 Apr., 201 ASS * UT complied ngjian N n one sample. of the CCIS pro uct sample deta f the product in omplies with all t prior written a t is unlawful an t refer only to th IC R h (Xiamen ,Guanri R o e -Q887R tle 47 Part sue 3, Dec sue 8, Dece 4 4 Apr., 20 4 d with the sta Nanfang The results co oduct certificatio ailed in this repo this report is us relevant standa pproval of the C nd offenders ma he sample(s) te REP ) Co., Ltd. oad, Softw t 15 Subpa cember 20 ember 201 14 andards spec Testing Report N ontained in this on mark. The m ort. sed in any confi ards. Company. Any ay be prosecute sted and such s POR ware Park II art C Sectio 10 10 cified above. g Co., L No: CCIS1 test report do manufacturer sh iguration other t unauthorized a ed to the fulles sample(s) are r RT I, Xiamen,3 on 15.247 Ltd. 140300154 not relate to o ould ensure tha than that detaile alteration, forger t extent of the retained for 90 d 361008, 402 other at all ed in ry or law. days 11908A-Q887R Shenzhen Zh No.B-C, 1/F. Bao’an Distri Telephone: + 2 Ver Versi Prepar e Review hongjian Nanfa , Building 2, L ct, Shenzhen , +86 (0) 755 23 rsion ion No. 00 ed by: wed by: ang Testing C aodong No.2 , Guangdong, 3118282 Fax: 15 Pr Co., Ltd. Industrial Par China +86 (0) 755 2 Date 5 Apr.,2014 Report C roject En k, Xixiang Roa 23116366 4 Clerk ngineer ad, Date: Date: Report N P Descri Orig No: CCIS1 roject No.: CC iption inal 15 Apr.,2 15 Apr.,2 140300154 CIS140300154 Page 2 of 6 2014 2014 402 4RF 68 Report No: CCIS14030015402 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 68 3 Contents Page 1 COVER PAGE ................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 CONTENTS ....................................................................................................................................................... 3 4 TEST SUMMARY .............................................................................................................................................. 4 5 GENERAL INFORMATION .............................................................................................................................. 5 5.1 CLIENT INFORMATION ...................................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................................... 5 5.3 TEST MODE .................................................................................................................................................................... 7 5.4 LABORATORY FACILITY ...................................................................................................................................................... 7 5.5 LABORATORY LOCATION ................................................................................................................................................... 7 5.6 TEST INSTRUMENTS LIST .................................................................................................................................................... 8 6 TEST RESULTS AND MEASUREMENT DATA ............................................................................................. 9 6.1 ANTENNA REQUIREMENT .................................................................................................................................................. 9 6.2 CONDUCTED EMISSIONS ................................................................................................................................................. 11 6.3 CONDUCTED OUTPUT POWER .......................................................................................................................................... 14 6.4 OCCUPY BANDWIDTH ..................................................................................................................................................... 18 6.5 CARRIER FREQUENCIES SEPARATION .................................................................................................................................. 25 6.6 HOPPING CHANNEL NUMBER .......................................................................................................................................... 30 6.7 DWELL TIME ...............................................................................................................................…

Text truncated - open the document above for the full version.

Report No: CCIS14030015402 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 61 7 Test Setup Photo Radiated Spurious Emission Report No: CCIS14030015402 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 61 Conducted Emission Report No: CCIS14030015402 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS140300154RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 61 8 EUT Constructional Details Reference to the test report No. CCIS14030015401 ----- -End of report------