Z64-WL1835COMWIFI AND BLUETOOTH EVALUATION BOARD

WL1835MODCOM8BWLANMIMOand Bluetooth ® ModuleEvaluationBoardfor TI Sitara™ Platform User's Guide LiteratureNumber:SWRU359C September2013–RevisedJanuary2014 Contents Preface.......................................................................................................................................3 1Introduction........................................................................................................................4 1.1Features..................................................................................................................4 1.2Applications..............................................................................................................5 1.3TI ModuleKey Benefits.................................................................................................5 2BoardPin Assignment.........................................................................................................6 2.1Pin Descriptions.........................................................................................................7 3ElectricalCharacteristics.....................................................................................................9 4AntennaCharacteristics.......................................................................................................9 4.1VSWR.....................................................................................................................9 4.2Efficiency................................................................................................................10 5AntennaCharacteristics.....................................................................................................10 5.1RadioPattern...........................................................................................................10 6CircuitDesign...................................................................................................................14 6.1Schematic...............................................................................................................14 6.2Bill of Materials(BOM)................................................................................................15 7LayoutGuidelines.............................................................................................................16 7.1BoardLayout...........................................................................................................16 2 Tableof ContentsSWRU359C–September2013–RevisedJanuary2014 SubmitDocumentationFeedback Copyright© 2013–2014,TexasInstrumentsIncorporated Preface SWRU359C–September2013–RevisedJanuary2014 ReadThisFirst AboutThisManual This user'sguidedescribeshow to use the TI WL1835MODCOM8Bboardto evaluatethe performanceof the TI WL18MODGBmodule. RelatedDocumentationFromTexasInstruments • TI WiLink8Single-BandComboModule– Wi-Fi,Bluetooth, and BLE (SWRS152) • WiLink8 Wiki:http://www.ti.com/wilink8wiki If You NeedAssistance The primarysourcesof WL18MODGBinformationare the device-specificdatasheetsand user’s guides. For the mostup-to-dateversionof the user’s guideand datasheets,go to http://www.ti.com/product/wl1835mod. Warning The WL1835MODCOM8Bboardis testedto complywith ETSI/R&TTE overtemperaturesfrom–20 to +70°C. This boardshouldnot be modifiedto operatein otherfrequencybandsotherthanwhatthey are designed for. FCCLicensingRequirementsfor EVM’s Wifi and BluetoothRadioModule: For evaluationonly;not FCCapprovedfor resale.This kit is designedto allow: 1. Productdevelopersto evaluateelectroniccomponents,circuitry,or softwareassociatedwith the kit to determinewhetherto incorporatesuchitemsin a finishedproduct 2. Softwaredevelopersto writesoftwareapplicationsfor use with the end product.This kit is not a finishedproductand whenassembledmay not be resoldor otherwisemarketedunlessall required FCCequipmentauthorizationsare first obtained.Operationis subjectto the conditionthat this product not causeharmfulinterferenceto licensedradiostationsand that this productacceptharmful interference.Unlessthe assembledkit is designedto operateunderpart 15, part 18, or part 95 of this chapter,the operatorof the kit mustoperateunderthe authorityof an FCClicenseholderor must securean experimentalauthorizationunderpart 5 of this chapter.” Per TI’s RegulatoryComplianceInformationlocatedin the WL1835ModCOMB8AUser’s Guide’s “EvaluationBoard/Kit/Module(EVM)AdditionalTerms,” this EVMcannotbe usedfor productionpurposes and is explicitlyrestrictedfromend-productintroduction. Use of this EVMrequiresthe developerto providea minimumdistanceof at least20 cm fromthe antenna to all personsin orderto minimizerisk of potentialradiationhazards. IndustryCanadaLicensingRequirements: The radiomoduleis IndustryCanadacertified,but doesnot applyto the EVM.This EVMis not authorized for sale or use inCanadaunlessspecialprovisionsare arrangedbetweendeveloperand IndustryCanada. CAUTION Do not leavethe EVMpoweredwhenunattended. 3 SWRU359C–September2013–RevisedJanuary2014Preface SubmitDocumentationFeedback Copyright© 2013–2014,TexasInstrumentsIncorporated User's Guide SWRU359C–September2013–RevisedJanuary2014 WL1835MODCOM8BWLANMIMOand Bluetooth ® Module EvaluationBoardfor TI Sitara™ Platform 1Introduction The WL1835MODCOM8Bdeviceis a WiFi ® MIMO,Bluetooth, andBluetoothLow Energy(BLE)module boardwith the TI WL18MODGBmodule.WL18MODGBis built-inTI WL1835IEEE802.11b/g/nand Bluetooth4.0 solutionsto providethe best WiFiandBluetoothcoexistenceinteroperabilityand power- savingtechnologiesfromTI. Figure1. WL1835MODCOM8BTop View 1.1Features • WLAN,Bluetooth, BLE on a moduleboard • 100-pinboardcard • Dimension76.0mm(L)x 31.0mm(W) • WLAN2.4 GHzSISO(20- and 40-MHzchannels),2.4-GHzMIMO(20-MHzchannels) • Supportfor BLE dual mode • Seamlessintegrationwith TI Sitaraand otherapplicationprocessors • Designfor TI AM335Xgeneral-purposeEVM • WLANandBluetooth, BLE coresare softwareand hardwarecompatiblewith priorWL127x,WL128x and CC256xofferings,for smoot…

Text truncated - open the document above for the full version.

Thank you for purchasing this Texas Instruments SimpleLink ™ Wi-Fi ® CC3000 Evaluation Module To get started, and for questions, please visit: Wireless Connectivity Wiki: www.ti.com/cc3000wiki User guides, sample applications, software available E2E Forum: www.ti.com/cc3000forum Engineer-to-engineer technical support EVALUATION BOARD/KIT/MODULE (EVM) WARNINGS, RESTRICTIONS AND DISCLAIMERS For Feasibility Evaluation Only, in Laboratory/Development Environments. Unless otherwise indicated, this EVM is not a fin- ished electrical equipment and not intended for consumer use. It is intended solely for use for preliminary feasibility evaluation in laboratory/development environments by technically qualified electronics experts who are familiar with the dangers and application risks associated with handling electrical mechanical components, systems and subsystems. It should not be used as all or part of a finished end product Your Sole Responsibility and Risk. You acknowledge, represent and agree that: 1. You have unique knowledge concerning Federal, State and local regulatory requirements (including but not limited to Food and Drug Administration regulations, if applicable) which relate to your products and which relate to your use (and/or that of your employees, affiliates, contractors or designees) of the EVM for evaluation, testing and other purposes. 2. You have full and exclusive responsibility to assure the safety and compliance of your products with all such laws and other ap- plicable regulatory requirements, and also to assure the safety of any activities to be conducted by you and/or your employees, affiliates, contractors or designees, using the EVM. Further, you are responsible to assure that any interfaces (electronic and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely limit accessible leakage currents to minimize the risk of electrical shock hazard. 3. You will employ reasonable safeguards to ensure that your use of the EVM will not result in any property damage, injury or death, even if the EVM should fail to perform as described or expected. 4. You will take care of proper disposal and recycling of the EVM’s electronic components and packing materials. Certain Instructions. It is important to operate this EVM within TI’s recommended specifications and environmental considerations per the user guidelines. Exceeding the specified EVM ratings (including but not limited to input and output voltage, current, power, and environmental ranges) may cause property damage, personal injury or death. If there are questions concerning these ratings please contact a TI field representative prior to connecting interface electronics including input power and intended loads. Any loads applied outside of the specified output range may result in unintended and/or inaccurate operation and/or possible permanent damage to the EVM and/or interface electronics. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative. During normal operation, some circuit components may have case temperatures greater than 60oC as long as the input and output are maintained at a normal ambient operating temperature. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors which can be identified using the EVM schematic located in the EVM User’s Guide. When placing measurement probes near these devices during normal operation, please be aware that these devices may be very warm to the touch. As with all electronic evaluation tools, only qualified personnel knowledgeable in electronic measurement and diagnostics normally found in development environments should use these EVMs Agreement to Defend, Indemnify and Hold Harmless. You agree to defend, indemnify and hold TI, its licensors and their represen- tatives harmless from and against any and all claims, damages, losses, expenses, costs and liabilities (collectively, “Claims”) arising out of or in connection with any use of the EVM that is not in accordance with the terms of the agreement. This obligation shall apply wheth- er Claims arise under law of tort or contract or any other legal theory, and even if the EVM fails to perform as described or expected. Safety-Critical or Life-Critical Applications. If you intend to evaluate the components for possible use in safety critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, such as devices which are classified as FDA Class III or similar classification, then you must specifically notify TI of such intent and enter into a separate Assurance and Indemnity Agreement. The platform bar is a trademark of Texas Instruments. © 2012 Texas Instruments Incorporated. 9 Printed on recycled paper SZZZ078 TI Worldwide Technical Support INTERNET TI Semiconductor Product Information Center Home Page www.support.ti.com TI Semiconductor Knowledge Base Home Page www.support.ti.com/sc/knowledgebase PRODUCT INFORMATION CENTERS Americas Phone +1 (972) 644-5580 Brazil Phone 0800-891-2616 Mexico Phone 0800-670-7544 Fax +1 (972) 927-6377 Internet/Email www.ti.com/ww/en/pic/PIC-Americas.htm Europe, Middle East, and Africa Phone European Free Call 00800-ASK TEXAS (00800 275 83927) International +49 (0) 8161 80 2121 Russian Support +7 (4) 95 98 10 701 NOTE: The European Free Call (Toll Free) number is not active in all countries. If you have technical difficulty calling the free call number please use the international number above. Fax +(49) (0) 8161 80 2045 Internet www.ti.com/ww/eu/customer_support/index.htm Asia Phone International +91-80-41381665 Domestic Toll Free Number Australia 1-800-999-084 China 800-820-8682 Hong Kong 800-96-5941 India 1-800-425-7888 Korea 080-551-2804 Malaysia 1-800-80-3973…

Text truncated - open the document above for the full version.

WL18MOD Product Certification 1 WL18MOD Product Certification Introduction The TI WL1835MODGB Module is now certified for FCC, IC, CE and TELEC. TI Customers that build products based on the TI WL1835MODGB module can save, in testing cost, and time per product family. •This feature can realize customers savings of over $60K per model family along with avoidance of test cycling and support resources. •For more details please refer to the information below. Certifications & Compliance •Certified for United States •Tests reports recognized by other countries for filing •Certified for Canada •Accepts FCC test reports for filing certifications •CE Radio Approval •ETSI testing is recognized by 40+ countries for filing •Certified for Japan •TELEC Test reports are available FCC [1] Certification Module The TI WL1835MODGB module is now certified for FCC as a single-modular transmitter. •The TI WL1835MODGB is a FCC certified radio module that carries a “Modular” grant. •Certified radio modules complies to the “Intentional Radiator” portion (Part 15c) for FCC certification: Part 15.247 Transmitter tests. •Part 15.247 transmitter tests consists of •AC Power Conducted Emissions •Radiated Emissions •Band Edge Measurements •6dB bandwidth •Conducted Power •Power Spectral Density •Meeting Antenna Requirements •The customer can refer to TI's [FCC certification], once available •“Modular” certified radio modules are allowed for integration into multiple host end products by the FCC Useful Links: WL1835MODGB FCC modular grant App note on modular FCC certification [2] WL18MOD Product Certification 2 LS Reserach App Note for FCC Permessive Change (LSR is TI's recommended Partner for any services related to Regulatory Certification or Permessive changes) [3] Host End Products •An end product, incorporating WL1835MODGB module, does not require additional testing or authorization for the WiFi transmitter as long as •An antenna of the same or similar type and equal or less gain to the antenna used in the WL1835MODGB COM8 Board (WL1835MODCOM8B [4] ) is used on the product •Any restrictions found in the grants are followed in the OEM’s end product integrating the TI module. •Host end products can use the FCC ID of the certified module as the FCC ID of the host end product •A label displaying the module’s FCC ID must be affixed and visible on the host end product for approval •FCC IDs are required for host end products with radio transmitters Customer's Responsibilities •The manufacturer of the host end products are still responsible for any additional testing covered by the Class of the product. Device Class A and B. •Customers still need to take their products through other FCC/IC testing such as unintentional radiators (FCC sub part 15B) including any other required regionally driven end product certifications including but not limited to EU directives. FCC Part 15 Cert. Process/Flow Step 1Step 2Step 3Step 4 Sub Part A •General Provisions & Definitions Sub Part B •Unintentional Radiators •Devices, whose purpose is not to produce radio waves, but which do anyway, such as computers. Sub Part C •Intentional Radiators •Devices designed to produce coherent radio waves, such as small transmitters •Customers can reuse TI's Certifications Device Class A and B •Additional testing for intended use Additional testing maybe required for Host end product type. •Class A: Digital Device for use in a commercial, industrial or business environment. •Class B: Digital Device for use in a residential environment not withstanding use in commercial, business and industrial environments. •The FCC allows for self-declaration for Part B so the process should be relatively painless The customer can refer to the Electronic Code of Federal Regulation for Telecommunications, Part 15: Radio Frequencies Devices [5] for more details on each sub part. Frequently Asked Questions 1. Can the customer change the Antenna Gain? Answer: Customers that copy the TI Reference Layout and modify it to use a lower gain antenna, can generally leverage TI FCC ID through a Permissive Class 1 change. 2. Can the customer change the Layout or use diffeerent type of Antenna? Answer: Customers that modify the antenna or layout in a way that changes the power (higher gain, shorter traces) are not able to leverage TI FCC ID through a Permissive Class 1 change. Such changes generally require additional testing and certification approval through a regulatory lab. 3. How can I get additional information on what is and is not permitted? Answers: Changes to a modular radio or product will result in either a Permissive Change or a new FCC filing and WL18MOD Product Certification 3 ID number. The degree of change is the determining factor for both the process and the amount of supporting data required to illustrate compliance. LS Research is TI recommended partner and takes pride in helping customers evaluate and develop the most beneficial test plan to properly address these changes. IC [6] Certification The TI WL1835MODGB module is now certified for Industry Canada (IC) as a single-modular transmitter •For Industry Canada, the TI WL1835MODGB module meets modular approval and labeling requirements. •Industry Canada follows the same testing and rules as the FCC in regards to certified modules in authorized equipment. Host Product •The IC ID of TI WL1835MODGB can be used on the Host End Product with a label that is visible, and displays the IC ID of the WL1835MODGA module •The customer can refer to TI's [WL1835MODGB IC certification], once available. Useful Links: WL1835MODGB IC modular grant App note on IC modular certification (see section 3.2 inside) [7] ETSI [8] /CE Certification WL1835MODGB is designed to CE Certified The TI WL1835MODGB module has certifications to the appropriate EU radio and EMC directives summarized in TI’s Declaration of Conformity ) and evidenced by the CE Mark. This certification eliminates EU RTTE based retesting efforts, resulting in savings of m…

Text truncated - open the document above for the full version.

Rev. 1/1/03 Sporton International Inc. No.52, HwaYa 1st Rd., Kwei-Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-327-3456 ; Fax: 886-3-328-4978 Date: January 27, 2014 Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request regarding application for certification of FCC ID: Z64-WL1835COM Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request Permanent Confidential treatment of information accompanying this application as outlined below:  Schematics  Block Diagram  Parts List  Operation Description  Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ________________________ Jones Tsai

1/1 Sporton International Inc. No.52, HwaYa 1st Rd., Kwei-Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-327-3456 ; Fax: 886-3-328-4978 Date: January 27, 2014 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : Z64-WL1835COM To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test Setup Photos  User Manual The application contains technical information, which the applicant deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Jones Tsai

Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 1 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 1. External Photograph of EUT Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 2 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510

Front of the EUT Label Location

Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 3 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 2. Internal Photograph of EUT 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 4 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 5 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 6 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 7 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 8 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Bluetooth & WLAN Antenna 1 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 9 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 10 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510 WLAN Antenna 2 Photographs of EUT Report No.: EP3N2752 Brand Name: Texas Instruments / Model Name: WL1835MODCOM8B SPORTON INTERNATIONAL INC. Page Number : 11 of 11 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM IC : 451I-WL1835COM 720510

SPORTON INTERNATIONAL INC. Page Number : 1 of 72 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM FCC RF Test Report Report No. : FR3N2752A FCC RF Test Report APPLICANT : Texas Instruments Incorporated EQUIPMENT : WiFi and Bluetooth Evaluation Board BRAND NAME : Texas Instruments MODEL NAME : WL1835MODCOM8B FCC ID : Z64-WL1835COM STANDARD : FCC Part 15 Subpart C §15.247 CLASSIFICATION : (DSS) Spread Spectrum Transmitter The product was received on Nov. 27, 2013 and testing was completed on Dec. 12, 2013. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown to be compliant with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 72 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM FCC RF Test Report Report No. : FR3N2752A TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Feature of Equipment Under Test ..................................................................................................... 5 1.4 Product Specification of Equipment Under Test ................................................................................ 5 1.5 Modification of EUT ........................................................................................................................... 6 1.6 Testing Site ........................................................................................................................................ 6 1.7 Applied Standards ............................................................................................................................. 6 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 7 2.1 Descriptions of Test Mode ................................................................................................................. 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 10 3 TEST RESULT .......................................................................................................................................... 11 3.1 Number of Channel Measurement .................................................................................................. 11 3.2 Hopping Channel Separation Measurement ................................................................................... 13 3.3 Dwell Time Measurement ................................................................................................................ 20 3.4 20dB and 99% Bandwidth Measurement ........................................................................................ 23 3.5 Peak Output Power Measurement .................................................................................................. 36 3.6 Conducted Band Edges Measurement ........................................................................................... 38 3.7 Conducted Spurious Emission Measurement ................................................................................. 45 3.8 Radiated Band Edges and Spurious Emission Measurement ........................................................ 55 3.9 AC Conducted Emission Measurement........................................................................................... 66 3.10 Antenna Requirements .................................................................................................................... 70 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 71 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 72 APPENDIX A. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 3 of 72 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM FCC RF Test Report Report No. : FR3N2752A REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR3N2752A Rev. 01 Initial issue of report Jan. 22, 2014 SPORTON INT…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : A1 of A2 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM FCC RF Test Report Report No. : FR3N2752A Appendix A. Setup Photographs <Conducted Emission> SPORTON INTERNATIONAL INC. Page Number : A2 of A2 TEL : 886-3-327-3456 Report Issued Date : Jan. 22, 2014 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : Z64-WL1835COM FCC RF Test Report Report No. : FR3N2752A <Radiated Emission> LF HF