ZK8-HB001CHubbell SpectraSAFE

1.Loginandpress+intheupperrightcorner.Select"AddDevice". 2.Tap√toproceed(Ifyou’resettingupmultiplecamerasatonce,tap+to addadditionalunits). 3.Followtheon-screeninstructionsandselect“Tapheretobeginsetup”togo totheWiFisettingspageonyoursmartphone. Note:IfyouareusinganiOSdevice,youwillneedtomanuallygototheWiFisettingspageonyour smartphone. 4.Selectthenetworknamed“HUB_SAP”andconnecttoit. Note:Ifyouseea"NoInternetConnection"errormessage,pleaseignoreitandconnectanyway. 5.ReturntotheHUBapppageandselectorentertheSSIDandpasswordoftheWiFi networkthatyouwantyourcameratoconnectto. Note:TheWiFinameandpasswordarecasesensitive. Tap√√toproceed. 6.Ifyouseethisscreen,theappwillconnectyourcameratoyourWiFinetwork.This maytakeafewminutes. Note:Ifyouareconnectingmultipledevices,youwillneedtowaitfortheapptofindandconnectall devices. 7.Nameyourcameraandsetapasswordforit.Tap√√toproceed. Note:Thepasswordprovidesanadditionallayerofsecurityforyourdevices.Youwillnotneedtouse thispasswordwhenaccessingyourdevicesfromtheHUBapp.Itisnotrequired,butitishighly recommended. 8. 云存储相关内容。可以引导客户体验和开通。 9.Yourcamerahasbeensuccessfullyconfigured!Youcannowshareorviewyour camera. FCC STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2)this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separatio n between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. The distance between user and products should be no less than 20cm

DATE : 2020-05-21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: ZK8-HB001C Product Name: Hubbell SpectraSAFE Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>: Name: Jason Zuo Title: Quality Engineer Applicant Company: ZMODO Technology Shenzhen Corp. Ltd.

DATE: 2020-05-21 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint DONGGUAN SHUOXIN ELECTRONIC TECHNOLOGY CO., LTD. Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with ZMODO Technology Shenzhen Corp. Ltd. 25/F, Office Tower A, Financial Technology Building,11 Keyuan Road, Nanshan District, Shenzhen, Guangdong, China (Applicant Name and address) <Signature>: Name: Jason Zuo Title: Quality Engineer Applicant Company: ZMODO Technology Shenzhen Corp. Ltd.

External photo

Error: No reference Error: No reference Error: No reference P1 valonso 05/01/20 SR- - VA- PV:1 REVDATERECORDDESNCHCKEC # P004/16/20Initial RleaseETH P105/04/20Mods + addition of FCC ID & Mfg. IDVA LBL-UL DATA SpectraSAFE NOTES: UNLESS OTHERWISE SPECIFIED 1. DEBURR AND BREAK SHARP CORNERS. 2. FOR DIMENSIONS NOT SHOWN REFER TO 3D MODEL. Error: No reference D C B A 12 876543 2 D C B A 12 876543 SHT 1 1 SHTS 93130682 This document contains confidential and proprietary information of Columbia Lighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rights to reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, without the specific written authorization of HLI, may violate the intellectual property rights of HLI. CRITICAL DIMENSIONS UNSPECIFED TOLERANCES: INCHES X.X=u0.030 X.XX=u0.015 X.XXX=u0.005 FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v REV. SIMILAR TO: FINISH:MATERIAL: THIRD ANGLE PROJECTION DRAWN: DO NOT SCALE PRINT CONFORMS TO ASME Y14.5M DIMENSIONS IN [ ] IN MM DIMENSIONS IN INCHES CHECKED BY: ENGINEERING: CATALOG NO. SCALE B SIZEDRAWING NO. Class 2 FCC ID: ZK8-HB001C INPUT: 5 VDC , 5 W Model Name: SAF E515112 93124134 A Hubbell Lighting Inc. SpectraSAFE LISTED AV Equipment NOTES: UNLESS OTHERWISE SPECIFIED 1. LABEL TO BE ANY PGJI2 LABEL TRANSFER MATERIAL MEETING THESE REQUIREMENTS: A. RATED FOR 150°C B. RATED FOR OUTDOOR USE C. RATED FOR PLACEMENT ON STAINLESS STEEL, GALVANIZED STEEL, ALUMINUM, ALKYD ENAMEL, ACRYLIC PAINT, POLYESTER PAINT OR EPOXY. 2. FONT: LETTER HEIGHT TO BE 0.040 UPPERCASE, UNIVERSAL BOLD, ARIAL BOLD, HELVETICA BOLD OR ZURICH BT BOLD ARE THE ONLY ACCEPTABLE FONTS ALLOWED. PRINTING TO BE BLACK ON WHITE 25.0 17.0 R 3.2

Label Location FCC LABLE Label Location (34.7mm x 23.2mm PGJI2 Paster)

Internal photo

FCC RF EXPOSURE REPORT FCC ID: ZK8-HB001C The report concerns: Original Grant Testing Laboratory ...................... : DongGuan ShuoXin Electronic Technology Co., Ltd. Address ...................................... : Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China Applicant’s name ........................ : ZMODO Technology Shenzhen Corp. Ltd Address ...................................... : 25/F, Office Tower A, Financial Technology Building, 11 Keyuan Road, Nanshan District, Shenzh en, Guangdong, China Manufacturer .............................. : ZMODO Technology Shenzhen Corp. Ltd Equipment .................................. :
Hubbell SpectraSAFE Trade Mark ................................. : N/A Model ........................................ : 93124134 Ratings ....................................... : I/P: DC 5V Responsible Engineer : Smile Wang Authorized Signatory: King Wang MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain(dBi) Note 1 N/A N/A PCB AntennaIpex 3 TEST RESULTS EUT： HubbellSpectraSAFE Model Name : 93124134 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : DC 5V 2.4G WIFI Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 3 1.9953 19.03 79.98 0.03177 1 Complies For 2.4G MPE: 0.03177/1 Note: the calculated distance is 20 cm.

Report No.: 20EFAS04126 2951 Page 1 of 75 FCC Radio Test Report FCC ID: ZK8-HB001C The report concerns: Original Grant Report Reference No. ................. : 20EFAS04126 2951 Date Sample(s) Received ........... : 2020-04-15 Date of Tested ............................. : 2020-04-15 to 2020-05-06 Date of issue ............................... : 2020-05-06 Testing Laboratory ...................... : DongGuan ShuoXin Electronic Technology Co., Ltd. Address ...................................... : Zone A, 1F, No. 6, XinGang Road YuanGang Street, XinAn District, ChangAn Town, DongGuan City, GuangDong, China Applicant’s name ........................ : ZMODO Technology Shenzhen Corp. Ltd. Address ...................................... : 25/F, Office Tower A, Financial Technology Building, 11 Keyuan Road, Nanshan District, Shenzhen, Guangdong, China Manufacturer............................... : ZMODO Technology Shenzhen Corp. Ltd. Equipment................................... :
Hubbell SpectraSAFE Trade Mark ................................. : N/A Model ........................................ : 93124134 Ratings ....................................... : I/P: DC 5V Responsible Engineer : Smile Wang Authorized Signatory: King Wang Report No.: 20EFAS04126 2951 Page 2 of 75 Table of Contents Page 1 . TEST REPORT DECLARE 4 2 . SUMMARY OF TEST RESULTS 5 2.1 MEASUREMENT UNCERTAINTY 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 8 3.3 PARAMETERS OF TEST SOFTWARE 9 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.5 SUPPORT UNITS 10 3.6 TEST ENVIRONMENT CONDITIONS 10 3.7 DUTY CYCLE 11 4 . AC POWER LINE CONDUCTED EMISSIONS TEST 12 4.1 LIMIT 12 4.2 TEST PROCEDURE 12 4.3 MEASUREMENT INSTRUMENTS LIST 12 4.4 TESTSETUP 13 4.5 EUT OPERATION CONDITIONS 13 4.6 TEST RESULTS 14 5 . RADIATED EMISSIONSTEST 16 5.1 LIMIT 16 5.2 TEST PROCEDURE 17 5.3 MEASUREMENT INSTRUMENTS LIST 18 5.4 TESTSETUP 18 5.5 EUT OPERATIONCONDITIONS 19 5.6 TEST RESULTS - 9KHZ TO 30MHZ 20 5.7 TEST RESULTS - 30MHZTO 1000MHZ 21 5.8 TEST RESULTS- ABOVE 1000MHZ(BAND EDGE) 23 5.9 TEST RESULTS- ABOVE 1000MHZ(HARMONIC) 39 6 . BANDWIDTH TEST 63 6.1 LIMIT 63 6.2 TEST PROCEDURE AND SETTING 63 6.3 MEASUREMENT INSTRUMENTS LIST 63 6.4 TEST SETUP 63 Report No.: 20EFAS04126 2951 Page 3 of 75 Table of Contents Page 6.5 EUT OPERATION CONDITIONS 63 6.6 TESTRESULTS 64 7 . MAXIMUM OUTPUT POWER TEST 68 7.1 LIMIT 68 7.2 TEST PROCEDURE AND SETTING 68 7.3 MEASUREMENT INSTRUMENTS LIST 68 7.4 TEST SETUP 68 7.5 EUT OPERATION CONDITIONS 68 7.6 TESTRESULTS 69 8 . CONDUCTED SPURIOUS EMISSIONS 70 8.1 LIMIT 70 8.2 TEST PROCEDURE AND SETTING 70 8.3 MEASUREMENT INSTRUMENTS LIST 70 8.4 TEST SETUP 70 8.5 EUT OPERATION CONDITIONS 70 8.6 TESTRESULTS 71 9 . POWER SPECTRAL DENSITY TEST 73 9.1 LIMIT 73 9.2 TEST PROCEDURE AND SETTING 73 9.3 MEASUREMENT INSTRUMENTS LIST 73 9.4 TEST SETUP 73 9.5 EUT OPERATION CONDITIONS 73 9.6 TESTRESULTS 74 Report No.: 20EFAS04126 2951 Page 4 of 75 1. TEST REPORT DECLARE Applicant ZMODO Technology Shenzhen Corp. Ltd. Address 25/F, Office Tower A, Financial Technology Building, 11 Keyuan Road, Nanshan District, Shenzhen, Guangdong, China Manufacturer ZMODO Technology Shenzhen Corp. Ltd. Address 25/F, Office Tower A, Financial Technology Building, 11 Keyuan Road, Nanshan District, Shenzhen, Guangdong, China Factory ZMODO Technology Shenzhen Corp. Ltd. Address 25/F, Office Tower A, Financial Technology Building, 11 Keyuan Road, Nanshan District, Shenzhen, Guangdong, China Equipment
Hubbell SpectraSAFE Model No. 93124134 Trade Mark N/A Standard FCC Part15, Subpart C (15.247) ANSI C63.10-2013 We Declare: The equipment described above is tested by DongGuan ShuoXin Electronic Technology Co., Ltd. and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and DongGuan ShuoXin Electronic Technology Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests. Report No.: 20EFAS04126 2951 Page 5 of 75 2. SUMMARY OF TEST RESULTS The EUT have been tested according to the applicable standards as referenced below: Standard(s) Section Test Item Judgment Remark FCC ISED 15.207 -- AC Power Line Conducted Emissions PASS ------ 15.247(d) 15.205(a) 15.209(a) -- Radiated Emissions PASS ------ 15.247(a)(2) -- Bandwidth PASS ------ 15.247(b)(3) -- Maximum Output Power PASS ------ 15.247(d) -- Conducted Spurious EmissionPASS ------ 15.247(e) -- Power Spectral Density PASS ------ 15.203 -- Antenna Requirement PASS Note(2) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The device what use a permanently attached antenna were considered sufficient tocomply with the provisions of 15.203. Report No.: 20EFAS04126 2951 Page 6 of 75 2.1 MEASUREMENT UNCERTAINTY Test Item Uncertainty Uncertainty for Conduction emission test (9kHz-150kHz) 3.7 dB Uncertainty for Conduction emission test (150kHz-30MHz) 3.3 dB Uncertainty for Radiation Emission test (30MHz-200MHz) 4.60 dB (Polarize: V) 4.60 dB (Polarize: H) Uncertainty for Radiation Emission test (200MHz-1GHz) 6.10 dB (Polarize: V) 5.08 dB (Polarize: H) Uncertainty for Radiation Emission test (1GHz-6GHz) 5.01 dB (Polarize: V) 5.01 dB (Polarize: H) Uncertainty for Radiation Emission test (6GHz-18GHz) 5.26 dB (Polarize: V) 5.26 dB (Polarize: H) Uncertainty for Radiation Emission test (18GHz-40GHz) 5.06 dB (Polarize: V) 5.06 dB (Polarize: H) Uncertainty for radio frequency ±0.048kHz Uncertainty for conducted RF Power ±0.32dB Note: This uncertainty represents an expanded uncertainty expressed at approximately the 95%confidence level using a coverage factor of k=2. Report No.: 20EFAS04126 2951 Page 7 of 75 3. GENERAL INFORMATION 3.1 GENE RAL DESCRIPTION OF EUT EquipmentHubbell SpectraSAFE Brand Name N/A Test Model 93124134 Series Model N/A Model Difference(s) N/A Hardware Version V1.0 Software Version V1.0 PowerSource Supplied from USB. Power Rati…

Text truncated - open the document above for the full version.

Setup photo Radiated Below 1G Radiated Above 1G Conduction