ZWYBM-6018AM2.4 GHz Baby Monitor Receiver

婴儿监护器简易说明手册 Baby Monitor Operating Instructions 使用前请仔细阅读本说明书 以确保安全和正确使用 并请妥善保管以供日后参考 Please read the user manual carefully before you use for your safety and correct operation, and please keep it properly for reference in future. 135x90mm 封面 135x90mm 内页 FCC Statement Radiation Exposure Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The camera should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with FCC radiation exposure limits 135x90mm 内页 Declaration of Conformity Hereby,Shinwa Industries(China) Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Caution! 135x90mm 内页 The product can not be used as a children's toy. Keep the product out of reach from children. The cable may cause potential safety hazard to children. Use only approved accessories and batteries. Do not connect incompatible products. Your device is not water-resistant.keep it dry. Follow any restrictions. switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas. All wireless devices may be susceptible to interference, which could affect performance. Power adaptor warning: “Use only provided power adaptor Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions Do not dispose of electrical products in the general waste and ensure the used product or batteries are disposed safely according to your local authority and regulations. Please do not use the product for illegal monitoring or recording. Our company will not undertake any relative legal liability that caused by illegal use. WARNING: 135x90mm 内页 勿将本产品作为儿童玩具玩耍。 请保持一定距离或放置儿童不易拿取到的地方。 电线可能会对儿童带来潜在的安全隐患。 本产品不防水，请保持干燥。 请遵守限制使用的规定：在医院/加油站/飞机/化学品易 燃易爆品周围请保持关机。 请使用原装适配器和电池。 废旧电池的处理及产品报废处理请遵守当地法律法规。 请勿将本品用于非法监控或录像。由非法使用引发的法 律问题，本司不负任何责任！ 警 告: 目 录 Contencs 摄像端 监控端 如何开关机 如何注册/注销 如何充电 电池如何安装拆除 Micro Sd卡如何安装拆除 按键说明 135x90mm 内页 Camera Receiver Power on/off Register/Logout Recharge Installed and remove the batteries Place/Remove Micro SD card Operate instruction 10 11 12 12 12 12 13 13 01 02 03 03 04 04 04 05 135x90mm 内页 Operating Instructions The care for children from family is the most considerate for every family. Shinwa baby monitor is designed specially for your children. It will give you unlimited free space and let you take care of your children’s every action. It supports the function of video recording (AVI), which can record children’s every funny action in their happy growth. It will help your children grow-up under your protection in a comfortable environment without any influence by any interference. 2.4GHz wireless digital signal transmission, with 2.4” colorful LCD, portable and small, easy to carry; Microphone equipped inside of camera, which help you hear your children’s voice, it can monitor multiple images simultaneously and play music（e.g. lullaby） by remote control. 01 Baby Monitor 01 02 03 04 Power Switch Register USB port Reset Camera 03 04 0201 02 01 02 03 04 05 06 07 Baby Monitor Operating Instructions Receiver VOX/Delete Power/ESC Five direction key (up/down/left/right/OK) Micro SD card slot (on the underside of the battery) USB port Earphone jack Reset 135x90mm 内页 0102 03 06 07 05 04 03 Baby Monitor Operating Instructions II. Power on/off Camera: Press the switch to power ON/OFF. When the power indicator LED is green, the product is ready to be operated. If the LED doesn’t light please replace the battery or recharge. Receiver: Press the Power switch to Power on/off. When the power indicator LED is blue means the receiver is now ready to operate, if not, please replace the batteries or recharge the receiver. The first time to power on, you should to register the camera to the receiver successfully. Ch1 Intensity of the single Battery capacity of the camera Battery capacity of the receiver III.Register/Logout Video monitoring status: Register: Power on the transmitter and the receiver. Press “Ok” button of the receiver, choose “setting” and then choose “register”. Select the transmission number a…

Text truncated - open the document above for the full version.

Shin wa Industries (China) Ltd. Date: 01-09-201 1 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Name: Shinwa lndustries (China) Ltd. Address: No.26, Huifeng West 2 Road, Zhongkai High -tech Park, Huizhou, Guangdong, China hereby authorize Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China Tel No.: +86-769-83183000 ext 11 9 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires bn September 01, 2012. Sincerely, Signature: Company Officer: ~ek/ghui Zuo Telephone Number: +86-0752-2602373 Email: [email protected]

Shinwa Industries (China) Ltd. Date: 01-09-2011 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: ZWYBM-6018A M Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Shinwa Industries (China) Ltd. hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Signature: Company Officer: Penghui Zuo Telephone Number: +86-0752-2602373 Email: [email protected]

Neutron Engineering Inc. Project No.: 1108C160A Page 2 of 14 1108C160A 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 2 of 14 1108C160A 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 3 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 3 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 4 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 4 of 14 1108C160A 1108C160A

Neutron Engineering Inc. Project No.: 1108C160A Page 5 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 5 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 6 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 6 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 7 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 7 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 8 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 8 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 9 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 9 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 10 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 10 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 11 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 11 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 12 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 12 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 13 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 13 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 14 of 14 1108C160A 1108C160A Neutron Engineering Inc. Project No.: 1108C160A Page 14 of 14 1108C160A 1108C160A

- 2 - FCC Part 2.1093 (2009-10-1), FCC OET 65C (01-01) Equipment: Baby Monitor REPORT NO.: I11GC9296-FCC-SAR Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 2 of 51 China Telecommunication Technology Labs. ® FCC ID: ZWYBM-6018AM Report Date: 2011-09-13 Test Firm Name: China Telecommunication Technology Labs Registration Number: 840587 Statement The measurements shown in this report were made in accordance with the procedures described on test pages. All reported tests were carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Part 2.1093. The sample tested was found to comply with the requirements defined in the applied rules. - 3 - FCC Part 2.1093 (2009-10-1), FCC OET 65C (01-01) Equipment: Baby Monitor REPORT NO.: I11GC9296-FCC-SAR Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 3 of 51 China Telecommunication Technology Labs. ® Table of Contents 1. General Information ....................................................................... 4 1.1 NOTES ............................................................................................... 4 1.2 TESTERS ............................................................................................. 5 1.3 TESTING LABORATORY INFORMATION ............................................................ 6 1.4 DETAILS OF APPLICANT OR MANUFACTURER ..................................................... 7 2 Test Item ......................................................................................... 8 2.1 GENERAL INFORMATION ........................................................................... 8 2.2 OUTLINE OF EUT ................................................................................... 8 2.3 MODIFICATIONS INCORPORATED IN EUT ........................................................ 8 2.4 EQUIPMENT CONFIGURATION ...................................................................... 8 2.5 OTHER INFORMATION .............................................................................. 8 2.6 EUT PHOTOGRAPHS ................................................................................ 8 2.7 REFERENCES ........................................................................................ 9 3 Measurement Systems ................................................................... 10 3.1 SAR MEASUREMENT SYSTEMS SETUP ......................................................... 10 3.2 E-FIELD PROBE ................................................................................... 11 3.3 PHANTOM .......................................................................................... 12 3.4 DEVICE HOLDER .................................................................................. 13 4 Test Results ................................................................................... 14 4.1 OPERATIONAL CONDITION ....................................................................... 14 4.2 TEST EQUIPMENT USED .......................................................................... 14 4.3 APPLICABLE LIMIT REGULATIONS ............................................................... 14 4.4 TEST RESULTS .................................................................................... 15 4.5 TEST SETUP AND PROCEDURES ................................................................. 15 4.6 TEST ENVIRONMENT AND LIQUID INFORMATION .............................................. 16 4.7 SYSTEM VALIDATION CHECK .................................................................... 17 4.8 MAXIMUM OUTPUT POWER STAND-ALONE TEST DETERMINATION ........................... 18 4.9 TEST DATA ........................................................................................ 19 4.10 MEASUREMENT UNCERTAINTY .................................................................. 20 Annex A EUT External Photos ........................................................... 21 Annex B EUT Internal Photos............................................................ 23 Annex C EUT Test Setup Photos ........................................................ 28 Annex D Graphical Measurement Results ......................................... 29 Annex E System Performance Check Graphical Results .................... 37 Annex F Probes Calibration Certificates ............................................ 39 Annex G Deviations from Prescribed Test Methods ........................... 51 - 4 - FCC Part 2.1093 (2009-10-1), FCC OET 65C (01-01) Equipment: Baby Monitor REPORT NO.: I11GC9296-FCC-SAR Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 4 of 51 China Telecommunication Technology Labs. ® 1. General Information 1.1 Notes All reported tests were carried out on a sample equipment to demonstrate limited compliance with the requirements of FCC CFR 47 Part 2.1093. The test results of this test report relate exclusively to the item(s) tested as specified in section 2. The following deviations from, additions to, or exclusions from the test specifications have been made. See Annex G. China Telecommunication Technology Labs.(CTTL) authorizes the applicant or manufacturer (see section 1.4) to reproduce this report provided, and the test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CTTL Mr. He Guili. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. CTTL accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. - 6 - FCC Part 2.1093 (2009-10-1), FCC OET 65C (01-01) Equipment: Baby Monitor REPORT NO.: I11GC9296-FCC-SAR Address：11 YUE TAN NAN JIE, BEIJ…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 1 of 60 6 FCC Radio Test Report FCC ID: ZWYBM-6018AM This report concerns (check one) : Original Grant Class II Change Issued Date : Sep. 01, 2011 Project No. : 1108C160A Equipment : Baby Monitor Model Name : BM-6018 Applicant : Shinwa industries(China) Ltd. Address : NO.26, Huifeng West 2 Road,Zhongkai High-tech Park,Huizhou,Guangdong,China Manufacturer : Shinwa industries(China) Ltd. Address : NO.26, Huifeng West 2 Road,Zhongkai High-tech Park,Huizhou,Guangdong,China Testing Engineer : (Ares Liu) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Aug. 16, 2011 Date of Test: Aug. 16, 2011 ~ Aug. 31, 2011 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 2 of 60 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 3 of 60 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 23 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 25 5 . NUMBER OF HOPPING CHANNEL 37 5.1 APPLIED PROCEDURES / LIMIT 37 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 37 5.1.2 TEST PROCEDURE 37 5.1.3 DEVIATION FROM STANDARD 37 5.1.4 TEST SETUP 37 5.1.5 EUT OPERATION CONDITIONS 37 5.1.6 TEST RESULTS 38 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 4 of 60 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 39 6.1 APPLIED PROCEDURES / LIMIT 39 6.1.1 MEASUREMENT INSTRUMENTS LIST 39 6.1.2. TEST PROCEDURES 39 6.1.3. TEST SETUP LAYOUT 39 6.1.4. TEST DEVIATION 39 6.1.5. EUT OPERATION DURING TEST 39 6.1.6. TEST RESULTS 40 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 42 7.1 APPLIED PROCEDURES / LIMIT 42 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 42 7.1.2 TEST PROCEDURE 42 7.1.3 DEVIATION FROM STANDARD 42 7.1.4 TEST SETUP 42 7.1.5 EUT OPERATION CONDITIONS 42 7.1.6 TEST RESULTS 43 8 . BANDWIDTH TEST 45 8.1 APPLIED PROCEDURES / LIMIT 45 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 45 8.1.2 TEST PROCEDURE 45 8.1.3 DEVIATION FROM STANDARD 45 8.1.4 TEST SETUP 45 8.1.5 EUT OPERATION CONDITIONS 45 8.1.6 TEST RESULTS 46 9 . PEAK OUTPUT POWER TEST 48 9.1 APPLIED PROCEDURES / LIMIT 48 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 48 9.1.2 TEST PROCEDURE 48 9.1.3 DEVIATION FROM STANDARD 48 9.1.4 TEST SETUP 48 9.1.5 EUT OPERATION CONDITIONS 48 9.1.6 TEST RESULTS 49 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 51 10.1 APPLIED PROCEDURES / LIMIT 51 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 51 10.1.2 TEST PROCEDURE 51 10.1.3 DEVIATION FROM STANDARD 51 10.1.4 TEST SETUP 51 10.1.5 EUT OPERATION CONDITIONS 51 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 5 of 60 Table of Contents Page 10.1.6 TEST RESULTS 52 11 . EUT TEST PHOTO 58 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 6 of 60 1. CERTIFICATION E q u i p m e n t : Baby Monitor Brand Name : shinwa Model Name : BM-6018 A p p l i c a n t : Shinwa industries(China) Ltd. Factory : Shinwa industries(China) Ltd. Address : NO.26, Huifeng West 2 Road,Zhongkai High-tech Park,Huizhou,Guangdong,China Date of Test : Aug. 16, 2011 ~ Aug. 31, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1108C160A) were obtained utilizing the te…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 58 of 60 11. EUT TEST PHOTO conducted Measurement Photos Normal link Mode Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 58 of 60 11. EUT TEST PHOTO conducted Measurement Photos Normal link Mode Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 59 of 60 Radiated Measurement Photos 30MHz~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 59 of 60 Radiated Measurement Photos 30MHz~1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 60 of 60 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FCCP-1-1108C160A Page 60 of 60 Radiated Measurement Photos Above 1000MHz