2AAMXWMS1200Smart Switch

Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 1 www.idealindustries.com PRODUCT DESCRIPTION The Audacy WMS1200 Smart Switch is a battery powered device specially designed to allow a building occupant to turn on, turn off, or dim light fixtures assigned to it. The product has a 25-year battery life design and will not require AC or DC line power, providing building owners and occupants placement flexibility. The Smart Switch wirelessly communicates with the light fixtures via the Audacy Smart Connector which resides at the fixture and also physically performs the corresponding control of the fixture(s). KEY FEATURES FCC and IC approved Flexible wall mounting options 25+ year battery life Small form factor with internal antenna RoHS compliant Factory configurable for custom applications PRODUCT CONTENTS The following items are included inside the package: Qty Description 1 Smart Switch WMS1200 1 Instruction card Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES. All other trademarks are the property of their respective owners. Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 2 www.idealindustries.com SET-UP AND OPERATION 1. Press the button located on the bottom side of the Smart Switch WMS1200 to activate device. 2. Mount the WMS1200 cradle in the desired. 3. When the green LED illuminates during switch actions, the WMS1200 is active and transmitting radio frequency (RF) energy. Data is automatically included in the transmission and can be received by one of the Audacy line smart connectors and/or Gateway. SPECIFICATIONS Item Description Radio 915 MHz Internal Antenna Regulatory Approvals FCC Part 15 and Industry Canada Contains FCC ID: 2AAMXWMS1200 Contains IC: 11250A-WMS1200 Transmit Range 100 ft. indoors to an Audacy Gateway or Smart Connector in a typical commercial office building Power 25+ year Li battery, non-replaceable Operating Temperature 10°C to 32°C Storage Temperature -20°C to 50°C Installation Environment Indoor use only Color White or Black Dimensions 4.14” x 1.75” x 0.92” Weight 2.7 oz Warranty 1 year Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 3 www.idealindustries.com MECHANICAL (REAR VIEW) *Dimensions in inches Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 4 www.idealindustries.com MECHANICAL (TOP VIEW) *Dimensions in inches Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 5 www.idealindustries.com SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: [email protected] Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 6 www.idealindustries.com COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. WARNING! FCC and IC Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions: 1. This equipment should be installed and operated such that a minimum separation distance of 20cm is maintained between the radiator (antenna) & user’s/nearby person’s body at all times. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complied with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif conformé à Industrie Canada exempts de licence standard RSS (s) et la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent entraîner un mauvais fonctionnement de l'appareil. Product Manual WMS1200 – Smart Switch ND8077-1 11/2014 Users Manual – WMS1200 Smart Switch Page 7 www.idealindustries.com IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from it…

Text truncated - open the document above for the full version.

MN:WMS1200 MN:WMS1200 MN:WMS1200

DURABLE PORTFOLIO Product Data Sheet Fasson® 2 Mil White Polyester TC/S8015/50#SCK Spec#: 76656 Facestock Facestock physical properties 2 Mil White Polyester TC is a homogeneously pigmented white facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. Imperial ValueUnitsMetric ValueUnits Caliper: ASTM D1000 0.0020inches50.80micron Tensile: ASTM D882 MD21,300PSI1,497kg/cm2 CD28,400PSI1,997kg/cm2 Adhesive Adhesive physical properties S8015 adhesive is a high strength clear adhesive featuring high initial tack, adhesion and shear. Offers strong permanent bonding to a wide variety of substrates including high surface energy (HSE), low surface energy (LSE) and powder coat substrates. Excellent chemical and UV resistance. Imperial ValueUnitsMetric ValueUnits Type:Solvent Acrylic Caliper: ASTM D1000 0.0010inches25.40micron Standard Coat Wt:32g/sq m Minimum Appl Temp:45F7C Service Temp Range: Min-30F-34C Max300F149C Loop Tack Stainless Steel: PSTC11 96.0oz/in105.6N/100mm Liner Liner physical properties 50#SCK is a bleached, super- calendered paper stock with very good diecutting and matrix stripping properties. Suitable for back-printing with standard inks. Imperial ValueUnitsMetric ValueUnits Caliper: ASTM D1000 0.0032inches81.2800microns Basis Wt: TAPPI T410 * (24" x 36" 500 sheets) 53.9lb/ream86.2g/sq m Tensile: ASTM D882 MD48.0lb/inch211.2N/25 mm CD26.0lb/inch114.4N/25 mm Tear: TAPPI T414 MD1.8ounces51.1grams CD2.0ounces56.8grams Liner Release: TMLI 90 o removal of Liner from Facestock. Total Construction Caliper (approximate): Rate of RemovalGrams/2" Width 400 inches/min.600.0060 inches Page 1 of 7Durable Form 1/29/2014http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F... Features and Benefits
Opaque white facestock with very good hiding power and physical strength
Glossy clear top coat that accepts most flexographic, letterpress, and rotary screen inks
Excellent thermal transfer printability with most wax/resin and resin ribbons
Topcoat and adhesive have excellent chemical resistance Applications and Uses This product is suitable for wide variety of durable labeling applications such as:
Product identification labels
Barcodes and rating plates
Work in progress labels (WIP)
Property identifcation and asset tags
Durable goods labeling
Automotive exterior or underhood labels. Meets GM6121M Type A & B; Daimler Chrysler MS-CG121 Type A, B, & D; Ford WSS-M99P34 Types A, A2, A3, & A4
UL Rating plates. This product is UL and UL-c recognized for indoor and outdoor use (see appendix). For specific information, see UL file # MH17205 for conditions of recognitions Printing and Converting The topcoat is designed for printing by flexography with most solvent and some water based inks. Specially formulated inks are normally not needed, however, testing is recommend prior to final ink selection. Suitable for thermal transfer printing applications with select ribbons and printer models. This product can be diecut and stripped at high speeds on standard web-fed presses. Sample labels in a variety of shapes have been successfully dispensed and applied with standard labeling systems. RoHS/Regulation 2002/95/EU The substances listed in article 4 lid 1 of 2002/95/EU (RoHS) are not intentionally used in this product. The concentration limits of these substances will not exceed the set maximum concentration limits as provided in the proposed amendment for 2002/95/EU. Shelf Life Unless specified otherwise in this document, one year when stored at 72°F at 50% RH Note: The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application. DURABLE PORTFOLIO Product Data Sheet Page 2 of 7Durable Form 1/29/2014http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F... DURABLE PORTFOLIO Product Data Sheet Appendix Performance Data: The following technical data should be considered representative or typical only and should not be used for specification purposes. Initial (15 minute dwell) 72 Hours at Room Temperature 72 Hours at 120 0 F96 Hours at 150 0 F (65 0 C) & 80% Relative Humidity Surface oz/inN/100mmoz/inN/100mmoz/inN/100mmoz/inN/100mm 1. Stainless Steel 2. Aluminum 3. Polypropylene 4. HDPE 5. LDPE 6. ABS Plastic 82.1 83.7 52.2 43.2 42.1 73 90.3 92.1 57.4 47.5 46.3 80.3 73.7 54.8 23.9 40.4 74.5 82.4 81.1 60.3 26.3 44.4 82 90.6 77.4 60.5 65.4 41.7 21.4 78.5 85.1 66.6 71.9 45.9 23.5 86.4 83.7 81.1 59.2 46.4 2.2 23.2 92.1 89.2 65.1 51 2.4 25.5 Environmental Performance: Chemical Resistance test results The performance results are based on 4 hour immersions at room temperature unless otherwise noted (gasoline is 1 hour). Samples were applied to stainless steel panels and conditioned for 24 hours before immersion and evaluated immediately upon removal. Adhesion measured at 180° peel. Adhesion to Stainless SteelVisualEdge Chemical oz/inN/100mmAppearancePenetration mm 1. 70% IPA 2. Tide® Detergent 3. Engine Oil (10W30) 4. Water 5. Ammonia - pH 11 6. 409® Cleaner 7. Toluene 8. Brake Fluid 9. Reference Fuel C 10. Kerosene K1 73.4 58.5 62.5 66.7 27.3 28.9 17.8 68.3 35.2 46.2 80.7 64.4 68.8 73.4 30 31.8 19.6 75.1 38.7 50.8 No Change No Change No Change No Change No Change No Change No Change No Change No Change No Change 0 0 0 0 0 0 8.9 0 6.4 3.3 Page 3 of 7Durable Form 1/29/2014http://na1.fasson.com/frna/Prod_sht.nsf/frna/Prod_sht.nsf/E0CCBFF8A68E33D2852570F... Compliance Recognition:UL, C-U 11. Heptane12.914.2No Change3.6 Underwriters Laboratories, Inc. Minimum TemperatureMaximum Temperature Substrates o F o C o F o C (I=Indoor Only I/O=Indoor & Outdoor) 1. Stainless Steel 2. Galvanized Steel 3. Polyurethane Powder Paint 4. Epoxy Paint 5. Porcelain 6. Alkyd Enam…

Text truncated - open the document above for the full version.

MN:WMS1200 MN:WMS1200

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at the antenna terminal:10.80(dBm) Maximum peak output power at the antenna terminal:12.02264435(mW) Antenna gain(typical):-7(dBi) Maximum antenna gain:0.199526231(numeric) Prediction distance:20(cm) Prediction frequency:915(MHz) MPE limit for uncontrolled exposure at prediction frequency:0.6(mW/cm^2) Power density at prediction frequency:0.000477(mW/cm^2) Maximum allowable antenna gain:23.99421106(dBi) 2 4 R PG S p =

Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 1 of 31 Test Report Curtis-Straus LLC, a wholly owned subsidiary of BV CPS Report No EP1864-1 Client Ideal Industries Inc. Tim Tunnell Address Becker Place Sycamore, IL 60178 Phone (815) 899 - 7774 Items tested WMS1200 FCC ID IC ID 2AAMXWMS1200 11250A-WMS1200 FRN 0002862225 Equipment Type Part 15.247 Digitally Modulated Equipment Code DTS FCC/IC Rule Parts 47 CFR 15.247, RSS-247 Issue 1, Test Dates July 7, 10 and September 3, 2015 Results As detailed within this report Prepared by Tuyen A. Truong – Test Engineer Authorized by Christopher Reynolds – EMC Supervisor Issue Date 1/22/2016 Conditions of Issue This Test Report is issued subject to the conditions stated in the ‘Conditions of Testing’ section on page 30 of this report. Test Report for Ideal Industries Inc.  Report No. EP1864-1 January 22, 2016 ______________________________________________________________________ ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 2 of 31 Contents Contents .................................................................................................................................. 2 Summary ................................................................................................................................. 3 Test Methodology .................................................................................................................... 4 Product Tested - Configuration Documentation ....................................................................... 5 Statement of Conformity ...................................................................................................... 6 Test Results ............................................................................................................................ 7 Bandwidth ............................................................................................................................ 7 Fundamental Emission Output Power ................................................................................ 11 Radiated Spurious Emissions ............................................................................................ 14 Power Spectral Density ...................................................................................................... 20 AC Line Conducted Emissions ........................................................................................... 24 Occupied Bandwidth .......................................................................................................... 25 Measurement Uncertainty .................................................................................................. 29 Conditions Of Testing ............................................................................................................ 30 Form Final Report REV 7-20-07 (DW) Test Report for Ideal Industries Inc.  Report No. EP1864-1 January 22, 2016 ______________________________________________________________________ Issue No. Reason for change Date Issued 1 Original Release January 22, 2016 _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 3 of 31 Summary This test report supports an application for certification of a transmitter operating pursuant to 47 CFR 15.247. The product is the WMS1200. It is a digitally modulated transmitter that operates in the range 902.7-927.3MHz. Product was tested with a PCB trace antenna with a gain of - 7.0dBi. We found that the product met the above requirements without modification. The test sample was received in good condition. Test Report for Ideal Industries Inc.  Report No. EP1864-1 January 22, 2016 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 4 of 31 Test Methodology Radiated emission testing was performed according to DTS guidance document 558074D01 v03r03 specified in FCC Guidance for performing compliance measurement on DTS operating under section 15.247, April 19, 2013 and ANSI C63.10 (2009). Radiated Emissions were maximized by rotating the device around its axes as well as varying the test antenna’s height and polarity. The device antenna could not be maximized separately. Conducted emissions testing at the antenna port was not performed as the EUT has a non- removable integral antenna. AC Main conducted emission was not performed with a 50Ω/50μH since EUT is battery powered. Low operating channel frequency = 902.7MHz Mid operating channel frequency = 915MHz High operating channel frequency = 927.3MHz The following bandwidths were used during radiated spurious and line conducted emissions. Frequency RBW VBW 0.15-30MHz 9kHz 30kHz 30-1000MHz 120kHz 1MHz 1-10GHz 1MHz 3MHz Test Report for Ideal Industries Inc.  Report No. EP1864-1 January 22, 2016 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 5 of 31 Product Teste…

Text truncated - open the document above for the full version.

MN:WMS1200 Radiated Emission MN:WMS1200 MN:WMS1200