2AAWX-UNV107Incipio Universal Bluetooth Keyboard for 7 inch Tablet

UNIVERSAL KEYBOARD FOLIO USER MANUAL 2 WHAT’S IN THE BOX? _ MAIN FEATURES _ • Folio with Bluetooth wireless keyboard • USB to Micro-USB charging cable • User documentation • Auto standby to save energy. • Built-in rechargeable battery which can be charged through a standard Micro-USB interface. • Light-weight and compact design for ultimate portability. • Compatible with most iOS, Android and Windows systems. • Removable magnetic keyboard. • Pull out and foldable design allows for multiple viewing modes. 3 SAFETY _ MAINTENANCE _ • Clean only with a dry cloth. • Recharge the keyboard every couple of months when not in use. • Avoid excessive impact, physical shock, or vibration as they may damage the keyboard. Inspect the case carefully before each use, especially after any drop, bump or other impact, to identify any sign of damage. If the keyboard becomes damaged, swells, leaks, overheats, or functions abnormally, immediately discontinue use and contact Incipio. Avoid all contact with contents from a leaking battery. • The keyboard is designed to be charged many times. Use the included micro-USB cable and an approved battery charger. Never use a modified or damaged battery charger. • Do not reverse charge or reverse connect the battery. Please note the battery will normally be warm during charging. • Recycle or dispose of the keyboard batteries properly and in accordance with applicable federal, state, and local laws and regulations. Do not dispose of batteries in the trash or fire. 4 10 INCH KEYBOARD LAYOUT: CMD Ctrl Alt Alt Ctrl Q ` ~ ! 1 2 3 4 5 6 7 8 9 0 - - - - + @ # $ % & ( ) T a b W E R TY U I O P S A D F G H J K L C a p s L o c k Shift Shift F n Z X C V B N M 12 4 3 6 5 1. Bluetooth pairing button 2. Power switch 3. Micro USB port 4. Capslock indicator 5. Charging indicator 6. Bluetooth indicator 5 7 INCH KEYBOARD LAYOUT: 1 2 4 3 6 5 1. Bluetooth pairing button 2. Power switch 3. Micro USB port 4. Capslock indicator 5. Charging indicator 6. Bluetooth indicator 6 KEY FUNCTIONS _ To access the functions on the keyboard, press and hold the Function (Fn) key and combine with the desired hotkeys on keyboard. By default, the keyboard will search the last paired device. If there is no keyboard operation within 15 minutes or the external device is away from Bluetooth’s operating distance for more than 15 minutes, the keyboard will enter into standby mode. You can touch any key to wake the keyboard. Keyboard will be awake in 2-3 seconds (the external device must be in the valid connecting distance). BLUETOOTH OPERATION DESCRIPTION _ Language Selection: • iOS - CMD + Spacebar • Android system - Ctrl + Spacebar • Windows system - CMD + Spacebar Note: • Lock screen function key is not supported by Windows systems. • Email function key is not supported by iOS systems. HOME COPY VOLUME+ SEARCHSELECT ALL CUTVOLUME- PLAY/PAUSE/PREVIOUS TRACK/NEXT TRACK PASTE EMAIL 7 CHARGING GUIDE _ BATTERY CHARGING • Connect the Micro-USB cable to the keyboard charging interface. • Connect USB-A to the power adaptor or USB interface of computer or other power sources. • The red LED indicator will be lit steady during charging and turn off once charging is complete. 8 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ IOS 1. Turn on the keyboard by sliding the power button to the ON position. 2. Press the Bluetooth pairing button to place the keyboard in pairing mode. The bluetooth indicator will begin blinking until the keyboard has been successfully paired. 3. On your iPad, tap Settings > Bluetooth, verify that the switch is in the ON position. SLIDE ON 9 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ IOS CONT’D 4. When Bluetooth Keyboard appears under the available devices, tap on it to begin connecting. 5. Success! Once your screen shows Connected next to Bluetooth Keyboard the pairing process has been completed. 10 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ ANDROID 1. Turn on the keyboard by sliding the power button to the ON position. 2. Press the Bluetooth pairing button to place the keyboard in pairing mode. The bluetooth indicator will begin blinking until the keyboard has been successfully paired. 3. On your tablet, tap Settings > Bluetooth, verify that the switch is in the ON position. SLIDE ON Bluetooth ON 11 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ ANDROID CONT’D 4. When Bluetooth Keyboard appears under the available devices, tap on it to begin connecting. 5. Success! Once your screen shows Connected next to Bluetooth Keyboard the pairing process has been completed. PAIRED DEVICES Bluetooth Keyboard Connected 12 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ WINDOWS 1. Turn on the keyboard by sliding the power button to the ON position. 2. Press the Bluetooth pairing button to place the keyboard in pairing mode. The bluetooth indicator will begin blinking until the keyboard has been successfully paired. 3. On your tablet, tap Settings > Change PC settings, verify that the switch is in the ON position. SLIDE ON 13 BLUETOOTH KEYBOARD PAIRING & CONNECTING _ WINDOWS CONT’D 4. Tap Devices, Windows will now begin searching for available devices. When Bluetooth Keyboard appears under the available devices, tap on it to begin connecting. 5. Success! Once your screen shows Connected next to Bluetooth Keyboard the pairing process has been completed. Connected 14 TROUBLESHOOTING _ UNABLE TO CONNECT 1. Make sure the power switch is ON position. 2. Make sure the keyboard is within the operating distance. 3. Make sure the battery is charged. 4. Make sure the device’s Bluetooth is enabled. 5. Clear the paired record of external device and close the bluetooth function, then pair again. UNABLE TO CHARGE KEYBOARD 1. Make sure the USB power cord is connected properly to the keyboard and the power source. 2. Make sure the power source is working properly. 15 FCC STATEMENT _ WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.…

Text truncated - open the document above for the full version.

Autho rity to Act as A gent October 21, 2015 To Whom It May Concern, We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Vicky Yuan at SGS-CSTC Standards Technical Services Co., Ltd (SGS) Shenzhen Branch to act on our behalf in all matters relating to all processes required in FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This agreement expires one year from the current date. Sincerely, Name Sally Namie Title Documentation and Compliance Specialist Company Name Incipio Technologies, Inc. Address 6001 Oak Canyon, Irvine, California, United States, 92618 Tel / Fax 949-556-3568 / 949-250-4928 E-Mail [email protected]

2AAWX-UNV107

1 Photographs - EUT Constructional Details Test model No.: BTKYB-009 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

1 Photographs - EUT Constructional Details Test model No.: BTKYB-009 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150700417202 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No: SZEM1507004172CR Applicant: Incipio Technologies, Inc. Manufacturer: SEENDA TECHNOLOGY CO., LTD Factory: SEENDA TECHNOLOGY CO., LTD Name: Incipio Universal Bluetooth Keyboard for 7 inch Tablet Model No.(EUT): BTKYB-009 Trade Mark： ：： ： Incipio FCC ID: 2AAWX-UNV107 Standards: 47 CFR Part 1.1307 (2014) 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r02 Date of Receipt: 2015-07-15 Date of Test: 2015-07-20 to 2015-07-21 Date of Issue: 2015-09-23 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150700417202 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-09-23 Original Authorized for issue by: Tested By 2015-07-21 (Owen Zhou) /Project Engineer Date Prepared By 2015-09-23 (Joyce Shi) /Clerk Date Checked By 2015-09-23 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150700417202 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Co…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM150700417201 Page: 1 of 68 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1507004172CR Applicant: Incipio Technologies, Inc. Manufacturer: SEENDA TECHNOLOGY CO., LTD Factory: SEENDA TECHNOLOGY CO., LTD Name: Incipio Universal Bluetooth Keyboard for 7 inch Tablet Model No.(EUT): BTKYB-009 Trade Mark： ：： ： Incipio FCC ID: 2AAWX-UNV107 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-07-15 Date of Test: 2015-07-20 to 2015-07-21 Date of Issue: 2015-09-23 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150700417201 Page: 2 of 68 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-09-23 Original Authorized for issue by: Tested By 2015-07-21 (Owen Zhou) /Project Engineer Date Prepared By 2015-09-23 (Joyce Shi) /Clerk Date Checked By 2015-09-23 (Eric Fu) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM150700417201 Page: 3 of 68 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: BTKYB-009 1.1 Conducted Emission 1.2 Radiated Emission 1.3 Radiated Spurious Emission