2AB6UACR1August Connect

Terms and Conditions 1 Terms and Conditions Terms and Conditions 2 Limited Warranty Statement IMPORTANT: By using the August Connect hardware (the “Device”) you are agreeing to be bound by the terms of this Limited Warranty set forth below. If you do not agree to the terms of this Limited Warranty you may return the Device (in its original, unused condition) within thirty days of the date of purchase (or the return period provided by your place of purchase, whichever is longer) for a refund in accordance with our returns policy as set forth in Section 3 of this Limited Warranty. This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province or jurisdiction. The disclaimers, exclusions, and limitations of liability under this Limited Warranty will not apply to the extent prohibited by applicable law. For a full description of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service. 1. Duration and Coverage. One (1) year Limited Hardware Warranty. Subject to the additional terms and conditions set forth below, August provides the following Limited Warranty: • Only to the person or entity that originally purchased the Device from August or from one of its authorized resellers or distributors; and • Only for Devices purchased and delivered to the end user within the United States, Canada, or Mexico. 2. Limited Warranty. August warrants the Device against defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase (“Warranty Period”). If a Device is returned to August during the Warranty Period as provided below, and August determines that the Device is defective, August will either repair or replace the unit with either a new or a refurbished August Connect, or refund the original purchase price in return for the Device, at its option. If the Warranty Period has expired or is otherwise not applicable as per the Scope and Limitation on Warranty (below), we will return the Device to you. More information about this warranty can be found at www.august.com/support. 3. Return and Warranty Service Process. Please review the online help resources at www.august.com/support prior to seeking warranty service. To obtain warranty service, you must first obtain a Return Merchandise Authorization (RMA) number from a Customer Support Representative (CSR) at August. Customer Support contact information can be found by visiting www.august.com/ support. August may attempt to troubleshoot a warranty-related problem prior to issuing a RMA number. August may ask for additional information upon request. Issued RMA numbers remain valid for thirty days from issuance. Once an RMA number is obtained, your Device must be shipped freight prepaid; together with proof of purchase and all accessories, either its original packaging or packaging affording an equal degree of protection, to the August authorized distribution facility identified by the CSR. Failure to return any of the accessories may result in a delay and/or result in a credit to August or an invoice for the missing accessories. 3 In performing warranty service, August may furnish replacement parts on an exchange basis and replaced parts will become the property of August. Replacement parts provided by August shall be new or refurbished and of comparable quality, and may be a different part that contains compatible features and functions. You will reimburse August for the inspection, testing and repair of returned equipment determined by August not to be defective or which falls under one of the warranty exclusions described below (as well as pay all shipping and handling charges). In all cases, August’s determination as to whether or not the equipment is defective and covered by warranty will be final. Any replacement equipment will be warranted hereunder for a period of one (1) year from shipment. August reserves the right to change the method by which August may provide warranty service to you, and your Device’s eligibility to receive a particular method of service. 4. Scope of and Limitation of Warranty. The warranty on this Device is limited to the repair or replacement of defective Devices as described in the Limited Warranty section above. This warranty does not cover customer training and education, installation, set up or adjustment, signal or reception problems. The August Smart Lock is not an ANSI or BHMA certified door lock and must be correctly installed and used with a certified door lock that is operating in good condition. You assume all risk associated with the suitability, installation and performance of the door lock and other third party components, hardware, software and services that you select. This warranty does not cover damage (i) due to acts of God, other forces beyond our reasonable control, such as internet or power outages, wars, riots, terrorism, labor disputes, earthquakes, floods or other events of “force majeure,” accident, misuse, abuse, negligence, commercial use or modification of, or to any part of your Device; (ii) caused by any third party product, service or system, use of the Device for purposes other than for which the Device was designed or intended, or use in improper temperature, humidity or other environmental conditions, or use of the Device in violation of written instructions provided by August (which may be provided at the time of purchase or on its website at www.august.com/ support). This warranty does not cover defects due to normal wear and tear or aging. This warranty does not cover damage due to improper repair, operation or maintenance or connections to improper voltage supply or, to the extent allowed by law, attempted repair by anyone other than a facility authorized by August to service your August Device. This warranty does not cover consumable parts (such as batteries). This warranty gives you specific leg…

Text truncated - open the document above for the full version.

1 Getting Started with Connect FPO Getting Started 2 Follow Installation Guide included with your August Smart Lock before configuring August Connect. Plug your August Connect into a power outlet near your door and wait for the flashing green lights. Install LockPlug In (If you don’t see the flashing green light, press and hold the button for 15 seconds, then wait). FPO 3 On the Lock Settings screen in the August app, select “Connect to Wi-Fi” and follow the instructions. Operate your lock and view its status from anywhere you have an Internet connection using the August app. Connect Use FPO FPO Getting Started 4 Questions? If you have any questions or difficulties, visit august.com/support or call 844-AUGUST1 (284-8781) Lost your phone? Go to august.com to disable the August app running on your phone. ©2014 August Home Inc. 100X-0000-A Rev 0.2

August Home Inc Address: 665 3rd St #150, San Francisco, CA 94107 Date:11.7.2014 Subject: Ad Hoc Mode Function Declaration FCC ID: 2AB6UACR1 To Whom it may concern, We, August Home Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. Regards, ( Signature Here) ------------------------------------------------------------------- Joseph Aranda / Operations August Home Inc. Tel No.: 7608282067 Faz No: 7608282067 E-mail: [email protected]

August Home Inc Address: 665 3rd St #150, San Francisco, CA 94107 AUTHORIZATION LETTER Date: 11.7.2014 FCC ID: 2AB6UACR1 To whom it may concern: We, the undersigned, hereby authorize (name: Amanda Wu and Title: Senior Specialist) of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by (name: Amanda Wu and Title: Senior Specialist) of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Joseph Aranda / Operations August Home Inc. Tel No.: 7608282067 Faz No: 7608282067 E-mail: [email protected]

August Home Inc Address: 665 3rd St #150, San Francisco, CA 94107 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: 10/25/2014 Subject: Request for Confidentiality FCC ID: 2AB6UACR1 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 2015/1/30. External Photos Internal Photos User Manual Test Setup photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Sincerely yours, ------------------------------------------------------- Joseph Aranda / Operations August Home Inc. Tel No.: 7608282067 Faz No: 7608282067 E-mail: [email protected]

Report No.: 141030E09 Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT

(Fig.1) FCC ID: 2AB6UACR1 Label FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. D 11/05/14DSANDY CHEN 11/05/14SANDY CHEN 11/05/14 HSINYUN LIN NEW RELEASE LASER ETCHING PMS COOL GREY 4 C SHM4-81 PMS COOL GREY 4 C COLOR 25.7 39.0 2.3 15.0 44.9 EXXXXXX EXXXXXX

Report No.: 141030E09 Page No. 2 / 6 Report No.: 141030E09 Page No. 3 / 6 Report No.: 141030E09 Page No. 4 / 6 Report No.: 141030E09 Page No. 5 / 6 Report No.: 141030E09 Page No. 6 / 6

Report No.: SA141030E09 1 of 7 Report Format Version 5.0.1 RF EXPOSURE REPORT REPORT NO.: SA141030E09 MODEL NO.: AC-R1 FCC ID: 2AB6UACR1 RECEIVED:Oct. 30, 2014 TESTED:Nov. 06, 2014 ISSUED:Nov. 24, 2014 APPLICANT: August Home Inc ADDRESS: 665 3rd St #150, San Francisco, CA 94107 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA141030E09 2 of 7 Report Format Version 5.0.1 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 6 Report No.: SA141030E09 3 of 7 Report Format Version 5.0.1 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA141030E09 Original release Nov. 24, 2014 Report No.: SA141030E09 5 of 7 Report Format Version 5.0.1 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Brand Model Gain (dBi) Antenna Type Connecter Type Frequency range (GHz to GHz) Cable Loss (dB) NA NA 1.74 PCB NA 2.4~2.4835 NA Report No.: SA141030E09 6 of 7 Report Format Version 5.0.1 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) 802.11b FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 135.519 1.74 20 0.04025 1.00 802.11g FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 372.392 1.74 20 0.11059 1.00 802.11n (HT20) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 - 2462 352.371 1.74 20 0.10465 1.00 Report No.: SA141030E09 7 of 7 Report Format Version 5.0.1 For Bluetooth: GFSK FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 7.816 1.74 20 0.00232 1.00 8DPSK FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402-2480 14.825 1.74 20 0.00440 1.00 BT-LE (GFSK) FREQUENCY (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2402 - 2480 6.982 1.74 20 0.00207 1.00 --- END --- CONCLUSION: Both of the Bluetooth and WLAN can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density For WLAN (2.4GHz) and Bluetooth: Therefore, the worst-case situation is 0.01513 / 1 + 0.00015 / 1 = 0.015, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. For WLAN (5GHz) and Bluetooth: Therefore, the worst-case situation is 0.00312 / 1 + 0.00015 / 1 = 0.003, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: RF141030E09 1 of 52 Report Format Version 5.2.1 FCC TEST REPORT (WLAN) REPORT NO.: RF141030E09 MODEL NO.: AC-R1 FCC ID: 2AB6UACR1 RECEIVED: Oct. 30, 2014 TESTED: Nov. 06, 2014 ISSUED: Nov. 24, 2014 APPLICANT: August Home Inc ADDRESS: 665 3rd St #150, San Francisco, CA 94107 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF141030E09 2 of 52 Report Format Version 5.2.1 Table of Contents RELEASE CONTROL RECORD ............................................................................. 4 1. CERTIFICATION ........................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................ 7 3. GENERAL INFORMATION ........................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT(WLAN) ................................................. 8 3.2 DESCRIPTION OF TEST MODES ............................................................. 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............. 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................. 14 3.4 DUTY CYCLE OF TEST SIGNAL ............................................................... 15 3.5 DESCRIPTION OF SUPPORT UNITS ....................................................... 16 3.6 CONFIGURATION OF SYSTEM UNDER TEST ......................................... 16 4. TEST TYPES AND RESULTS .................................................................... 17 4.1 CONDUCTED EMISSION MEASUREMENT .............................................. 17 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................... 17 4.1.2 TEST INSTRUMENTS ................................................................................ 17 4.1.3 TEST PROCEDURES ................................................................................ 18 4.1.4 DEVIATION FROM TEST STANDARD ....................................................... 18 4.1.5 TEST SETUP .............................................................................................. 18 4.1.6 EUT OPERATING CONDITIONS ............................................................... 19 4.1.7 TEST RESULTS ......................................................................................... 20 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................... 22 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ... 22 4.2.2 TEST INSTRUMENTS ................................................................................ 23 4.2.3 TEST PROCEDURES ................................................................................ 24 4.2.4 DEVIATION FROM TEST STANDARD ....................................................... 24 4.2.5 TEST SETUP .............................................................................................. 25 4.2.6 EUT OPERATING CONDITIONS ............................................................... 25 4.2.7 TEST RESULTS ......................................................................................... 26 4.3 6dB BANDWIDTH MEASUREMENT .......................................................... 36 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ....................................... 36 4.3.2 TEST INSTRUMENTS ................................................................................ 36 4.3.3 TEST PROCEDURE ................................................................................... 36 4.3.4 DEVIATION FROM TEST STANDARD ....................................................... 36 4.3.5 TEST SETUP .............................................................................................. 36 4.3.6 EUT OPERATING CONDITIONS ............................................................... 36 4.3.7 TEST RESULTS ......................................................................................... 37 Report No.: RF141030E09 3 of 52 Report Format Version 5.2.1 4.4 CONDUCTED OUTPUT POWER MEASUREMENT .................................. 39 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREME…

Text truncated - open the document above for the full version.

Report No.: 140605E01 1 of 3 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 140605E01 2 of 3 RADIATED EMISSION TEST (Below 1GHz) Report No.: 140605E01 3 of 3 RADIATED EMISSION TEST (Above 1GHz)