2AD8UASMR28FA3UANokia AWEUA/B Airscale mmWave Radio 2T2R 28G + FA3UA Airscale mmWave Extension Module 28G

Date: 1/11/2021 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, R&D Engineer, Regulatory Compliance Nokia Solutions and Networks OY 2000 Lucent Lane Naperville IL 60563

Date: 1/11/2021 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: 2AD8UASMR28FA3UA To Whom It May Concern: Pursuant to FCC 47 CRF 0.457(d) and 0.459, Nokia Solutions and Networks requests that a part of the subject FCC application listed below be held permanently confidential and permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public • Tune-Up Procedure and Drive levels • Operating Description • Circuit Diagrams (Schematics) • Block Diagrams • Instruction Book/Manual • Internal Photographs of the Equipment • NDA- Operational Description NDA • Antenna Specification Confidentiality of the User Manual is maintained by requiring that any party that is supplied a user manual must first sign a non-disclosure agreement. Currently only cellular system operators have access to these manuals. Internal photos are kept confidential by virtue of the fact that the end product is a non-consumer product, certified and housed in a sealed enclosure, and is only accessible by trained /approved maintenance personnel. Further, the Applicant has spent substantial effort in developing this product, some aspects of which are deemed to be trade secret and proprietary. Having the subject information easily available to our competitors in this market would negate the advantage we have achieved by developing this product. Not protecting the details of the design will result in financial hardship It is our understanding that all measurement test reports, FCC ID label/format, and correspondence during certification review process cannot be granted as confidential documents and will be available for public review once the grant of equipment authorization is issued. Regards Terry Schwenk Title: R&D Engineer – Regulatory Compliance Nokia Solutions and Networks, OY

Date: 1/11/2021 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: NDA Exhibit - LONG-TERM CONFIDENTIALITY FOR INTERNAL PHOTOS AND USER’S MANUAL FCC ID: 2AD8UASMR28FA3UA To Whom It May Concern: KDB 726920 D01 “Equipment Authorization Confidentiality Request Procedures” Section II 3) The internal photos and/or user’s manual exhibits may be given Long-Term Confidentiality under the following special conditions: a) Internal photos 1. May be held Confidential if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2. Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. b) User’s manual may be held Confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. c) In the application cover letter requesting Long-Term Confidentiality the following additional description (in item 7) and the NDA exhibit is required: 1. Describe in detail how internal photos and/or user’s manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for Confidentiality must include the key terms of the NDA to ensure consistency between the two. Response The internal photos and user’s manual were requested for the long-term Confidentiality in the letter for Request of Permanent Confidentiality submitted in this application. The rationales for such request have been stated in the letter. In accordance with the procedures specified above, a sample generic copy of the Nokia NDA between the grantee and a purchaser is attached. Additionally, The Nokia product, the subject of this application, is not subject to third party sales. The final user of the device is always a License holder/cellular operator. Regards Terry Schwenk Title: R&D Engineer – Regulatory Compliance Nokia Solutions and Networks, OY

Date: 1/11/2021 SECTION 2.1033 (c) (12) EXTERNAL PHOTOS FCC ID: 2AD8UASMR28FA3UA The external photographs of the Nokia AWEUA/B and FA3UA 5G AirScale 28 GHz mmWave Radio, FCC ID: 2AD8UASMR28FA3UA are attached.are covered below Front View AWEUC/D (Base Unit) Front View FA3UA (Extension Module) Back View AWEUC/D (Base Unit) Back View FA3UA (Extension Module) Right Side AWEUC/D (Base Unit) Right Side FA3UA (Extension Module) Left Side AWEUC/D (Base Unit) Left Side FA3UA (Extension Module) Top View AWEUC/D (Base Unit) Top View FA3UA (Extension Module) Bottom View AWEUC/D (Base Unit) Bottom View FA3UA (Extension Module)

Date: 1/11/2021 SECTION 2.1033(c) (11) also SECTION 2.925 (a) (1) FCC ID LABEL SAMPLE AND LOCATION INFORMATION FCC ID: 2AD8UASMR28FA3UA The drawing of the equipment identification labels to be placed on the Nokia AWEUA/B 5G AirScale 28 GHz mmWave Radio, FCC ID: 2AD8UASMR28FA3UA are below. A drawing showing label location and drawings of the equipment identification label(s) is attached. Both the main units and extension units are covered below AWEUA/B Label Location FA3UA Label Location

1 / 15 LPITPN2I4Q5L-1109616211-1717 PUBLIC © Nokia 2021 RF exposure compliance assessment 5G Airscale mmWave Radio Solution – AWEUA/B + FA3UA US - FCC ID: 2AD8UASMR28FA3UA Canada - 109D-ASMR28FA3UA Author Kamil Bechta Owner Christophe Grangeat Organization MN 5G&SC Arch Approver Terry Schwenk Document Type Preliminary test report Document ID LPITPN2I4Q5L-1109616211-1717 Document location https://nokia.sharepoint.com/:f:/r/sites/EMFProductManagement/Shared%20Documents/General/Products- RF-exposure-assessment/AWEUA?csf=1&web=1&e=Z7oUnw Change History Version Status Date Author Owner Reviewed by Reviewed date Approver Approval date Description of changes 1.0 Final 05-02-2021 K. Bechta C. Grangeat C. Grangeat 05-02-2021 T. Schwenk 05-02-2021 2.0 Final 09-02-2021 K. Bechta C. Grangeat C. Grangeat 05-02-2021 T. Schwenk 09-02-2021 Update of antenna gain, simulation results and compliance distances This material, including documentation and any related computer programs, is protected by copyright controlled by Nokia. All rights are reserved. Copying, including reproducing, storing, adapting or translating, any or all of this material requires the prior written consent of Nokia. This material also contains confidential information, which may not be disclosed to others without the prior written consent of Nokia. 2 / 15 LPITPN2I4Q5L-1109616211-1717 PUBLIC © Nokia 2021 Contents 1 General content .................................................................................................................... 4 2 References ............................................................................................................................. 4 Applicable RF exposure standards and regulations ........................................................ 4 Product and assessment method ...................................................................................... 5 3 RF exposure limits ................................................................................................................ 5 4 Description of the equipment under test (EUT) .............................................................. 6 5 RF exposure assessment method...................................................................................... 10 6 RF exposure computation results ...................................................................................... 10 Regions of application: EU/ICNIRP, Australia/NZ, Canada and US/related .................. 10 7 Conclusion and installation recommendations ................................................................ 14 List of Tables Table 1 – Applicable RF exposure levels in n261 band expressed in power density .......................... 5 Table 2 – AWEUA/B and FA3UA product general technical characteristics.......................................... 6 Table 3 - Reference system used in this report (from NGMN white paper [15]) ......................................... 7 Table 4 – Antenna pattern models for RF exposure assessment ......................................................... 8 Table 5 – Antenna gain characteristics for various beam steering directions used during EMF evaluation9 Table 6 - Validation of the antenna model at 28000 MHz ......................................................................... 10 Table 7 – AWEUA/B and FA3UA RF exposure compliance distances based on the time-averaged maximum transmitted power of 0.713 W (corresponding to 0.631 W rated max transmitted power) .......................................................................................................................................................... 14 Table 8 – AWEUA/B and FA3UA RF exposure compliance distances based on the time-averaged actual maximum transmitted power of 0.178 W (corresponding to 0.631 W rated max transmitted power) .................................................................................................................................... 15 List of Figures Figure 1 – Shape of the compliance boundary used for the RF exposure compliance assessment (from [4]). ...................................................................................................................................................... 9 3 / 15 LPITPN2I4Q5L-1109616211-1717 PUBLIC © Nokia 2021 Figure 2 – Example 3D exposure with the shape of compliance boundaries.................................... 11 Figure 3 – Top view of the power density for the time-averaged maximum transmitted power of 0.713 W and the beam oriented in azimuth = 0° & elevation = 0° .................................................... 11 Figure 4 – Top view of the power density for the time-averaged actual maximum transmitted power of 0.178 W and the beam oriented in azimuth = 0° & elevation = 0° .................................... 11 Figure 5 – Side view of the power density for the time-averaged maximum transmitted power of 0.713 W and the beam oriented in azimuth = 0° & elevation = +15° ................................................ 12 Figure 6 – Side view of the power density for the time-averaged actual maximum transmitted power of 0.178 W and the beam oriented in azimuth = 0° & elevation = +15° ............................... 12 Figure 7 – Side view of the power density for the time-averaged maximum transmitted power of 0.713 W and the beam oriented in azimuth = 0° & elevation = -15° ................................................ 12 Figure 8 – Side view of the power density for the time-averaged actual maximum transmitted power of 0.178 W and the beam oriented in azimuth = 0° & elevation = -15° ................................ 12 Figure 9 – Top view of the power density for the time-averaged maximum transmitted power of 0.713 W and the beam oriented in azimuth = -45°/+45° & elevation = 0° ...................................... 13 Figure 10 – Top view of the power density for the time-averaged actual maximum transmitted power of 0.178 W and the beam oriented in azimuth = -45°/+45° &…

Text truncated - open the document above for the full version.

NVLAP LAB CODE 200065-0 (FREMONT) CERTIFICATION TEST REPORT Report Number : 13415473-E2V2 Applicant : Nokia Solutions and Networks US LLC 6000 Connection Drive Irving, Texas 75039, USA Product : 5G AirScale 28 GHz 2T2R n261 mmWave Radio Models : AWEUA / AWEUB / FA3UA FCC ID : 2AD8UASMR28FA3UA EUT Description : Nokia AWEUA/B Airscale mmWave Radio 2T2R 28G + FA3UA Airscale mmWave Extension Module 28G Test Standard : 47 CFR FCC PART 30 §2.1046 RF Power Output, §2.1049 OBW, §2.1051 Antenna Spurious (Radiated), §2.1053 Cabinet Spurious Date Of Issue: February 05, 2021 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 2 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By V1 01/27/2021 Initial Issue Michael Heckrotte V2 02/05/2021 Updated EUT Description Updated Model Number of Extension Unit on Section 6.1 GP Chin REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 3 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................5 2. SCOPE AND SUMMARY .....................................................................................................6 3. TEST METHODOLOGY ......................................................................................................6 4. FACILITIES AND ACCREDITATION ..................................................................................6 5. CALIBRATION AND UNCERTAINTY .................................................................................7 5.1. METROLOGICAL TRACEABILITY ...............................................................................7 5.2. DECISION RULES ........................................................................................................7 5.3. MEASUREMENT UNCERTAINTY ................................................................................7 6. EQUIPMENT UNDER TEST ................................................................................................8 6.1. DESCRIPTION OF EUT ...............................................................................................8 6.2. DESCRIPTION OF AVAILABLE ANTENNA ................................................................10 6.3. DESCRIPTION OF TEST SETUP ...............................................................................10 6.3.1. EUT AND SUPPORT EQUIPMENT .....................................................................10 6.3.2. I/O PORTS ..........................................................................................................10 6.3.3. TEST SETUP DIAGRAMS ...................................................................................11 7. TEST AND MEASUREMENT EQUIPMENT ......................................................................15 8. APPLICABLE LIMITS AND TEST RESULTS ...................................................................16 8.1. OCCUPIED BANDWITH .............................................................................................16 8.2. RF POWER OUTPUT .................................................................................................32 8.3. BAND EDGE EMISSIONS ..........................................................................................44 8.4. SPURIOUS EMISSIONS ............................................................................................64 8.4.1. RADIATED EMISSIONS, 30 MHz - 1 GHz ...........................................................66 8.4.2. RADIATED EMISSIONS, 1 - 18 GHz ...................................................................67 8.4.3. RADIATED EMISSIONS, 18 - 20 GHz .................................................................68 8.4.4. RADIATED EMISSIONS, 20 – 24 GHz ................................................................69 8.4.5. RADIATED EMISSIONS, 24 – 27.49 GHz ...........................................................71 8.4.6. RADIATED EMISSIONS, 28.36 - 30 GHz ............................................................74 8.4.7. RADIATED EMISSIONS, 30 - 40 GHz .................................................................77 8.4.8. RADIATED EMISSIONS, 40 - 50 GHz .................................................................79 8.4.9. RADIATED EMISSIONS, 50 - 75 GHz .................................................................80 8.4.10. RADIATED EMISSIONS, 75 - 100 GHz ...........................................................81 9. SETUP PHOTOS ...............................................................................................................82 APPENDIX A ............................................................................................................................89 1. 50-75 GHz VDI WR15.0SAX ..........................................................................................89 2. 75-110 GHz VDI WR10.0SAX ........................................................................................90 REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 4 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services I…

Text truncated - open the document above for the full version.

REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 44 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 8.3. BAND EDGE EMISSIONS RULE PART(S) FCC: §2.1051 (Radiated with Antenna), §2.1053 (Cabinet Radiated), §30.203 LIMITS 30.203 (a) - The conductive power or the total radiated power of any emission outside a licensee's frequency block shall be −13 dBm/MHz or lower. However, in the bands immediately outside and adjacent to the licensee's frequency block, having a bandwidth equal to 10 percent of the channel bandwidth, the conductive power or the total radiated power of any emission shall be −5 dBm/MHz or lower. TEST PROCEDURE • RBW = 1 MHz • VBW ≥ 3 x RBW • Number of measurement points in sweep > 2 x span / RBW • Sweep time = auto-couple • Detector = RMS, Gated • Trace mode = Average KDB 842590 D01 Upper Microwave Flexible Use Service v01 Section 4.2 ANSI C63.26-2015 Clause 5.2, Clause 5.5, Clause 6.4, and Annex C.5.2 Band Edge measurements were measured as EIRP for direct comparison to the 30.203 TRP limit to demonstrate compliance. Band Edge measurements were performed at 4.5 m test distance. EIRP of BE emission was calculated using the equations on ANSI C63.26-2015 Annex C.5.2. The total correction factors from the receive horn antenna gain ranging 26 – 40 GHz, cable loss and far-field path loss @ 4.5 m and the EUT antenna gain were calculated using equations C.8 and C.9, and pre-loaded into spectrum analyzer. Sample calculation of EIRP: Total Correction Factor = Cbl Loss (dB) – Horn Ant Gain (dBi) + Path Loss @ 4.5m (dB) + EUT Ant Gain (dBi) = 4 - 23 + 74.5 + 27 = 82.5 dB EIRP = P measured (dBm), where Total Correction Factor preloaded. In order to properly display of signal level on the plots, the pre-loaded correction factors were intentional lowered by 45 dB and an offset factor of 45 dB was applied on spectrum analyzer to compensate the true correction factors across 26 - 40 GHz frequency range. Radiated power levels are investigated while the receive horn antenna was rotated through all angles to determine the worst case polarization/positioning. REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 45 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RESULTS See the following pages. Employee IDs: 19296 & 19437 Location: Chamber 1 Test Date: 10/1/2020 – 10/6/2020 REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 46 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1 Carrier Configuration, Left Tx Main Unit - QPSK, Horizontal Tx Main Unit - QPSK, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 47 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1 Carrier Configuration, Left Tx Extension Unit – 16QAM, Horizontal Tx Extension Unit - 16QAM, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 48 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1 Carrier Configuration, Right Tx Main Unit - QPSK, Horizontal Tx Main Unit - QPSK, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 49 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1 Carrier Configuration, Right Tx Extension Unit - QPSK, Horizontal Tx Extension Unit - QPSK, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 50 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 2 Carrier Configuration, Left Tx Extension Unit – 64QAM, Horizontal Tx Extension Unit – 64QAM, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 51 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 2 Carrier Configuration, Right Tx Extension Unit – 16QAM, Horizontal Tx Extension Unit – 16QAM, Vertical REPORT NO: 13415473-E2V2 DATE: FEBRUARY 05, 2021 MODELS: AWEUA/AWEUB/FA3UA FCC ID: 2AD8UASMR28FA3UA Page 52 of 93 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 3 Carrier Configuration, Left Tx Main U…

Text truncated - open the document above for the full version.

Global Product Compliance Laboratory 600-700 Mountain Avenue Room 5B-108 Murray Hill, New Jersey 07974-0636 USA TESTING NVLAP LAB CODE: 100275-0 FCC Certification Part 2/30 Test Report 2.1047 Modulation 2.1053 Frequency Stability Product Evaluated 5G AirScale 28 GHz 2T2R n261 mmWave Radio FCC ID: 2AD8UASMR28FA3UA Customer Nokia Solutions and Networks US LLC 6000 Connection Drive Irving, Texas 75039 USA Test Laboratory Nokia Bell Labs Nokia, Global Product Compliance Laboratory 600-700 Mountain Avenue, Rm 5B-108 Murray Hill, New Jersey 07974-0636 USA Date: February 5, 2021 This report shall not be reproduced, in whole or in part without the approval of Nokia Global Product Compliance Laboratory. This report must not be used by the recipient to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. NOKIA – Public 2 Revisions Date Revision Section Change 11/13/2020 0 Initial Release 02/05/2021 1 Modified product name. Modified KDB 842590 D01 test standard reference to latest version. Nokia Global Product Compliance Laboratory represents to the client that testing was done in accordance with standard procedures as applicable, and that reported test results are accurate within generally accepted commercial ranges of accuracy in accordance with the scope of our NVLAP Accreditation. Nokia Global Product Compliance reports only apply to the specific samples tested. This report is the property of the client. This report shall not be reproduced except in full without the written approval of the Nokia Global Product Compliance Laboratory. Nokia Global Product Compliance Laboratory is accredited with the US Department of Commerce National Institute of Standards and Technology's National Voluntary Laboratory Accreditation Program (NVLAP) for satisfactory compliance with criteria established in Title 15, Part 7 Code of Federal Regulations for offering test services for selected test methods in Electromagnetic Compatibility; Voluntary Control Council for Interference (VCCI), Japan; Australian Communications and Media Authority (ACMA). Nokia Global Product Compliance Laboratory represents to the client that the laboratory’s accreditation or any of its calibration or test reports in no way constitutes or implies product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Prepared By: W. Steve Majkowski NCE Approved By: Ray Johnson 02/05/2021 02/05/2021 Product Certification Filing Lead Nokia Bell Labs Nokia, Global Product Compliance Laboratory Technical Manager Nokia Bell Labs Nokia, Global Product Compliance Laboratory Prepared By: Mark Nguyen 02/05/2021 Compliance Engineer Nokia Bell Labs Nokia, Global Product Compliance Laboratory NOKIA – Public 3 Table of Cont…

Text truncated - open the document above for the full version.