2ADCB-BMODIT2BMODIT2 Bluetooth LE Module

ACUITY BRANDS LIGHTING – MUTUAL CONFIDENTIALITY AGREEMENT THIS AGREEMENT is entered into and is effective as of Insert Date (the “Effective Date”) between Acuity Brands Lighting, Inc., a Delaware corporation (“ABL”) and Insert Name of Company, a corporation/business organized under the laws of the state of Insert State or Country of Incorporation (“Company”). The parties acknowledge that ABL and Company are in discussions about a potential business relationship between them (the "Business Relationship") in connection with which certain Confidential Information (as defined below) of ABL and Company may be disclosed to the other party. In consideration of the mutual covenants set forth below, ABL and Company each agree as follows: 1. Confidential Information. As used in this Agreement, the term “Confidential Information” means all information, whether or not reduced to writing, related to the potential business relationship or to the business of either party or its Affiliates (as defined below) that (a) is disclosed by one party or its Representatives (as defined below) (the “Disclosing Party”) to the other party (the "Recipient") or observed by the Recipient on the Disclosing Party’s premises, and (b) is identified as confidential or with other similar designation(s) by the Disclosing Party, or would otherwise reasonably be understood to be confidential under the circumstances. Confidential Information includes but is not limited to data (technical and non-technical), formulas, patterns, compilations (including compilations of customer information), programs (including models), devices, methods (including design methods), techniques, drawings (including equipment drawings), processes, financial information (including sales forecasts), pricing, lists of actual or potential customers or suppliers (including identifying information about those customers), operational information, planning or strategy information, research and development information, information about existing and future products, and information about personnel matters of the Disclosing Party or its Affiliates. Confidential Information also includes information disclosed by a third party that otherwise meets the foregoing definition, and the fact that negotiations are taking place hereunder. An “Affiliate” means any legal entity that one of the parties hereto owns, that owns one of the parties or that is under common control with one of the parties. “Control” and “own” mean possessing a 50% or greater interest in an entity or the right to direct the management of the entity. 2. Exclusions. For purposes of this Agreement, the term “Confidential Information” does not include any data or information which: (a) the Recipient can establish was already known by the Recipient at the time of disclosure hereunder by the Disclosing Party; (b) is or becomes generally known to the public other than as a result of a disclosure by the Recipient; (c) is received by the Recipient from a third party, without restriction on disclosure, and without breaching any obligation of confidentiality about which the Recipient knew or should have known; or (d) is independently developed by the Recipient without use or reliance on, directly or indirectly, of Confidential Information received from Disclosing Party, as demonstrated from the written records of the Recipient. 3. Confidentiality and Non-Use of Confidential Information. Each of the parties hereto and its Representatives (a) must use the same care and discretion as it employs with its own confidential and proprietary information (but in no event less than reasonable care and discretion) to maintain in confidence, and prevent disclosures of, the Confidential Information of the other party, and (b) must not use the Confidential Information of the other party except to further the Business Relationship or as otherwise specifically authorized in writing by the Disclosing Party. Under no circumstances, except as expressly set forth below, shall the Recipient reproduce, distribute or otherwise provide, directly or indirectly, any Confidential Information of the other party to any person or entity outside of this Agreement without the consent of the Disclosing Party. Each party understands that in addition to its obligations to the other party under this Agreement, it may not use any Confidential Information of the other party in violation of any federal or state securities laws governing insider trading. Each party understands and will inform its Representatives that such laws prohibit any person, directly or indirectly, from buying or selling securities of any company while in possession of material non-public information regarding that company. 4. Permitted Disclosures. Disclosures of the Confidential Information of the Disclosing Party may be made only to Affiliates, employees, agents, advisors or independent contractors of the Recipient who are directly involved in performing or evaluating the Business Relationship, and who have a specific need to know such information, and who are obligated to hold the information in confidence and otherwise to comply with the terms of this Agreement (collectively, “Representatives”). The Recipient agrees to instruct each of its Representatives to maintain the confidentiality of all of the Confidential Information, and shall be liable for any unauthorized disclosures of Confidential Information by the Recipient's Representatives. Neither party shall directly or indirectly contact, or discuss the Business Relationship contemplated under this Agreement, with any person who is not a designated Representative of the other party. 5. Mandatory Disclosure. If Confidential Information is required to be produced by law, court order or governmental authority, the Recipient must promptly notify the Disclosing Party of that obligation. The Recipient shall not produce or disclose any such Confidential Information until the Disclosing Party has (a) requested protection from …

Text truncated - open the document above for the full version.

April 14, 2020 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Acuity Brands Lighting, Inc. FCC ID: 2ADCB-BMODIT2 To Whom It May Concern: We, Acuity Brands Lighting, Inc., hereby authorized Marlene Sealey of TUV SUD America, 10040 Mesa Rim Road, San Diego, CA 92121 and Alex Bahk of Acuity Brands, 1 Acuity Way, Decatur, GA, 30035, USA to act as our Agent for the purpose of preparing application for FCC ID number 2ADCB-BMODIT2 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is April 1, 2020. The Limited Agency Agreement expires on December 31, 2020, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Name: Fred Carpenter Title: VP, Standard and Testing

Figure 1: BMODIT Module with PIFA Antenna

Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 1 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. BMODIT2 Labeling Requirements Module Label A label will be silkscreened to the module. The size of this label will be no greater than 10x16mm. And will contain the following text: Module Label Picture FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Acuity Brands Lighting Inc. BMODIT2 Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 2 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. Host Label A label will be affixed to the host device with the following text: The label will be properly sized to fit the application. If the host device is smaller than the palm of a hand, the label will be: The label will be properly sized to fit the application. Example: Contains FCC ID: 2ADCB-BMODIT2 Contains IC: 6715C-BMODIT2 Acuity Brands Lighting Inc. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contains FCC ID: 2ADCB-BMODIT2 Contains IC: 6715C-BMODIT2 Acuity Brands Lighting Inc. Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 3 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. User Manual: The BMODIT2 user manual will contain all information required to create a label.

TÜV SÜD America 5610 West Sligh Ave., Suite 100 Tampa, FL 33634 Phone: 813-284-2715 www.tuv-sud-america.com TÜV SÜD Certification Exhibit FCC ID: 2ADCB-BMODIT2 FCC Rule Part: 47 CFR Part 2.1091 TÜV SÜD Project Number: 72158565 Manufacturer: Acuity Brands Lighting, Inc. Model: BMODIT2 RF Exposure Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 Project: 72158565 TÜV SÜD America Inc. Page 2 General Information: Applicant: Acuity Brands Lighting, Inc. Device Category: Mobile Environment: General Population/Uncontrolled Exposure Technical Information: Antenna Type: Multiple Antenna Gain(s): PCB Trace Antenna / 3.2 dBi Surface Mount Chip Antenna / 3 dBi Maximum Transmitter Conducted Power: 10.48 dBm, 11.1686 mW Maximum System EIRP: 13.68 dBm, 23.3346 mW Exposure Conditions: 20 centimeters or greater MPE Calculation The Power Density (mW/cm 2 ) is calculated as follows: S = 2 4R PG π Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Table 1: MPE Calculation Antenna Transmit Frequency (MHz) Radio Power (dBm) Power Density Limit (mW/Cm2) Radio Power (mW) Antenna Gain (dBi) Antenna Gain (mW eq.) Distance (cm) Power Density (mW/cm^2) Trace 2402 10.48 1.00 11.17 3.2 2.089 20 0.005 Chip 2402 10.48 1.00 11.17 3 1.995 20 0.004 Note: The device does not support simultaneous transmissions

TÜV SÜD America 5610 West Sligh Ave., Suite 100 Tampa, FL 33634 Phone: 813-284-2715 www.tuv-sud-america.com TÜV SÜD RESPONSIBLE FOR NAME DATE SIGNATURE Authorized Signatory Peter Walsh 2020 -May-01 Testing Thierry Jean Charles 2020-May-01 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD Product Service document control rules. FCC Accreditation Designation Number US1063 Tampa, FL Test Laboratory Innovation, Science, and Economic Development Canada Accreditation Site Number 2087A-2 Tampa, FL Test Laboratory EXECUTIVE SUMMARY Samples of this product were tested and found to be in compliance with 15.247 and ISED Canada’s RSS-247. A2LA Cert. No. 2955.15 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD America with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD America. No part of this document may be reproduced without the prior written approval of TÜV SÜD America. © TÜV SÜD. DISCLAIMER AND COPYRIGHT Our A2LA Accreditation does not cover opinions and interpretations and any expressed are outside the scope of our A2LA Accreditation. Results of test not covered by our A2LA Accreditation Schedule are marked NUA (Not A2LA Accredited). FCC and ISED Canada Testing of the Acuity Brands Lighting, Inc. BMODIT2 In accordance with FCC 47 CFR part 15.247 and ISED Canada’s Radio Standards Specifications RSS-247 Prepared for: Acuity Brands Lighting, Inc. One Lithonia Way Conyers GA, 30012 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 COMMERCIAL-IN-CONFIDENCE Document Number: TP72158565.102| Version Number: 03 Document Number: TP72158565.102 | Version Number: 03 COMMERCIAL-IN-CONFIDENCE Page 2 of 46 Contents 1Report Summary .........................................................................................................................3 1.1Report Modification Record ...........................................................................................................3 1.2Introduction ....................................................................................................................................3 1.3Brief Summary of Results .............................................................................................................5 1.4Product Information .......................................................................................................................6 1.5Deviations from the Standard ........................................................................................................8 1.6EUT Modification Record ..............................................................................................................9 1.7Test Location .................................................................................................................................9 2Test Details ............................................................................................................................... 10 2.1Antenna Requirements............................................................................................................... 10 2.26 dB Bandwidth .......................................................................................................................... 11 2.399% Bandwidth .......................................................................................................................... 14 2.4Peak Output Power .................................................................................................................... 17 2.5Band-Edge Compliance of RF Conducted Emissions ............................................................... 20 2.6RF Conducted Spurious Emissions ........................................................................................... 23 2.7Radiated Spurious Emissions into Restricted Frequency Bands ............................................... 26 2.8Power Spectral Density .............................................................................................................. 34 2.9Power Line Conducted Emissions ............................................................................................. 37 3Test Equipment Information ................................................................................................... 41 3.1General Test Equipment Used ................................................................................................... 41 4Diagram of Test Set-ups .......................................................................................................... 42 5Measurement Uncertainty ....................................................................................................... 45 6Accreditation, Disclaimers and Copyright............................................................................. 46 Document Number: TP72158565.102 | Version Number: 03 COMMERCIAL-IN-CONFIDENCE Page 3 of 46 1 Report Summary 1.1 Report Modification Record Alterations and additions to this report will be issued to the holders of each copy in the form of a complete document. Issue Description of Change Date of Issue 1 First Issue 2020-April-16 2 Corrected typos in Sections 2.5.6 and 2.6.6 2020-April-20 3 Corrected typos in Sections 2.2.6 and 2.3.6 2020-May-01 1.2 Introduction The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations Section 15.247 and Innovation Science and Economic Development Canada’s Radio Standards Specification RSS-247 for the tests documented herein. Document Number: TP72158565.102 | Version Number: 03 COMMERCIAL-IN-CONFIDENCE Page 4 of 46 Applicant Acuity Brands Lighting, Inc. Manufacturer Acuity Brands Lighting, Inc. Applicant’s Email Address [email protected] Model Number(s) BMODIT2 Serial Number(s) N/A FCC ID 2ADCB-BMODIT2 ISED Certification Number 6715C-BMODIT2 Hardware Version(s) N/A Software Version(s) N/A Number of Samples Test…

Text truncated - open the document above for the full version.

TÜV SÜD America 5610 West Sligh Ave., Suite 100 Tampa, FL 33634 Phone: 813-284-2715 www.tuv-sud-america.com TÜV SÜD Certification Exhibit FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 FCC Rule Part: 15.247 ISED Canada’s Radio Standards Specification: RSS-247 Project: 72158565 Manufacturer: Acuity Brands Lighting, Inc. Model: BMODIT2 Test Setup Photos Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 2 Figure 1: Radiated Emissions – Front View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 3 Figure 2: Radiated Emissions – Front View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 4 Figure 3: Radiated Emissions – Back View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 5 Figure 4: Radiated Emissions – Back View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 6 Figure 5: Radiated Emissions – Front View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 7 Figure 6: Radiated Emissions – Back View – PCB Trace Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 8 Figure 7: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 9 Figure 8: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 10 Figure 9: Radiated Emissions – Back View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 11 Figure 10: Radiated Emissions – Back View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 12 Figure 11: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 13 Figure 12: Radiated Emissions – Back View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 14 Figure 13: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 15 Figure 14: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 16 Figure 15: Radiated Emissions – Back View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 17 Figure 16: Radiated Emissions – Back V View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 18 Figure 17: Radiated Emissions – Front View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 19 Figure 18: Radiated Emissions – Back View – Chip Antenna Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 20 Figure 19: RF Conducted Emissions Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 21 Figure 20: Power Line Conducted Emissions – Front View Model: BMODIT2 FCC ID: 2ADCB-BMODIT2 IC: 6715C-BMODIT2 Project: 72158565 TÜV SÜD America, Inc. Page 22 Figure 21: Power Line Conducted Emissions – Side View