2ADCB-RES7CDnLightAir RES7CD RF Module

ACUITY BRANDS LIGHTING – MUTUAL CONFIDENTIALITY AGREEMENT THIS AGREEMENT is entered into and is effective as of Insert Date (the “Effective Date”) between Acuity Brands Lighting, Inc., a Delaware corporation (“ABL”) and Insert Name of Company, a corporation/business organized under the laws of the state of Insert State or Country of Incorporation (“Company”). The parties acknowledge that ABL and Company are in discussions about a potential business relationship between them (the "Business Relationship") in connection with which certain Confidential Information (as defined below) of ABL and Company may be disclosed to the other party. In consideration of the mutual covenants set forth below, ABL and Company each agree as follows: 1. Confidential Information. As used in this Agreement, the term “Confidential Information” means all information, whether or not reduced to writing, related to the potential business relationship or to the business of either party or its Affiliates (as defined below) that (a) is disclosed by one party or its Representatives (as defined below) (the “Disclosing Party”) to the other party (the "Recipient") or observed by the Recipient on the Disclosing Party’s premises, and (b) is identified as confidential or with other similar designation(s) by the Disclosing Party, or would otherwise reasonably be understood to be confidential under the circumstances. Confidential Information includes but is not limited to data (technical and non-technical), formulas, patterns, compilations (including compilations of customer information), programs (including models), devices, methods (inc luding design methods), techniques, drawings (including equipment drawings), processes, financial information (including sales forecasts), pricing, lists of actual or potential customers or suppliers (including identifying information about those customers), operational information, planning or strategy information, research and development information, information about existing and future products, and information about personnel matters of the Disclosing Party or its Affiliates. Confidential Information also includes information disclosed by a third party that otherwise meets the foregoing definition, and the fact that negotiations are taking place hereunder. An “Affiliate” means any legal entity that one of the parties hereto owns, that owns one of the parties or that is under common control with one of the parties. “Control” and “own” mean possessing a 50% or greater interest in an entity or the right to direct the management of the entity. 2. Exclusions. For purposes of this Agreement, the term “Confidential Information” does not include any data or information which: (a) the Recipient can establish was already known by the Recipient at the time of disclosure hereunder by the Disclosing Party; (b) is or becomes generally known to the public other than as a result of a disclosure by the Recipient; (c) is received by the Recipient from a third party, without restriction on disclosure, and without breaching any obligation of confidentiality about which the Recipient knew or should have known; or (d) is independently developed by the Recipient without use or reliance on, directly or indirectly, of Confidential Information received from Disclosing Party, as demonstrated from the written records of the Recipient. 3. Confidentiality and Non-Use of Confidential Information. Each of the parties hereto and its Representatives (a) must use the same care and discretion as it employs with its own confidential and proprietary information (but in no event less than reasonable care and discretion) to maintain in confidence, and prevent disclosures of, the Confidential Information of the other party, and (b) must not use the Confidential Information of the other party except to further the Business Relationship or as otherwise specifically authorized in writing by the Disclosing Party. Under no circumstances, except as expressly set forth below, shall the Recipient reproduce, distribute or otherwise provide, directly or indirectly, any Confidential Information of the other party to any person or entity outside of this Agreement without the consent of the Disclosing Party. Each party understands that in addition to its obligations to the other party under this Agreement, it may not use any Confidential Information of the other party in violation of any federal or state securities laws governing insider trading. Each party understands and will inform its Representatives that such laws prohibit any person, directly or indirectly, from buying or selling securities of any company while in possession of material non-public information regarding that company. 4. Permitted Disclosures. Disclosures of the Confidential Information of the Disclosing Party may be made only to Affiliates, employees, agents, advisors or independent contractors of the Recipient who are directly involved in performing or evaluating the Business Relationship, and who have a specific need to know such information, and who are obligated to hold the information in confidence and otherwise to comply with the terms of this Agreement (collectively, “Representatives”). The Recipient agrees to instruct each of its Representatives to maintain the confidentiality of all of the Confidential Information, and shall be liable for any unauthorized disclosures of Confidential Information by the Recipient's Representatives. Neither party shall directly or indirectly contact, or discuss the Business Relationship contemplated under this Agreement, with any person who is not a designated Representative of the other party. 5. Mandatory Disclosure. If Confidential Information is required to be produced by law, court order or governmental authority, the Recipient must promptly notify the Disclosing Party of that obligation. The Recipient shall not produce or disclose any such Confidential Information until the Disclosing Party has (a) requested protection from…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST Federal Communications Commission Date: December 14, 2020 Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: Acuity Brands Lighting, Inc. respectfully requests confidentiality of certain materials provided with the submission of the RES7CD under FCC ID: 2ADCB-RES7CD in accordance with 47 CFR 0.457(d) and 47 CFR 0.459. The confidentiality request applies to the 1) Schematic, 2) Detailed block diagram, 3) Theory of operation, 4) Parts list, 5) User Guide/Manual contained in this filing and included in the following files. 16-3027 – System Block Diagram.pdf 16-3027 – Theory of Operation.pdf 16-3027 – Schematics.pdf 16-3027 – Parts List.pdf 16-3027 – User Manual.pdf 16-3027 – Internal Photos.pdf The RES7CD has been developed at considerable effort and expense by Acuity Brands Lighting, Inc. This item is one of the first of its kind in the industry and these exhibits contain the working and functional operation formation about the item which includes how the item is constructed. Public access to the proprietary material would negate the competitive advantage that we have achieved by developing this item. Not protecting the details of the design could severely damage the company's business advantage. The User Manual and internal Photos for RES7CD will be held confidential and not released to any third party without NDA. The User Manual and internal Photos contains proprietary technical information intended for Acuity Brands employees only. Sincerely, Name: Alex Bahk Signature: Title: Lead RF Engineer

December 14, 2020 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Acuity Brands Lighting, Inc. FCC ID: 2ADCB-RES7CD To Whom It May Concern: We, Acuity Brands Lighting, Inc., hereby authorized Stan Mushyakov of TUV SUD America, 5945 Cabot Parkway, Suit 100, Alpharetta, GA, 30005 and Alex Bahk of Acuity Brands, 1 Acuity Way, Decatur, GA, 30035, USA to act as our Agent for the purpose of preparing application for FCC ID number 2ADCB-RES7CD under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is December 14, 2020. The Limited Agency Agreement expires on December 31, 2021, unless sooner terminated or extended by written notice to TUV SUD America and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Name: Fred Carpenter Title: VP, Standard and Testing

Request for FCC Modular Approval December 14, 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: I certify that all exhibits contained within this filing properly describe the device or system for which certification is sought. I further certify that all requirements for modular approval have been met. At this time, I would like to request formal approval for Equipment Certification of the Modular Device, RES7CD. For reference, the Modular Approval Checklist is attached. Sincerely, Name: Alex Bahk Title: Lead RF Engineer Modular Approval Requirement Yes No Details (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. x (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. x (iii) The modular transmitter must have its own power supply regulation. x (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. x (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see § 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see § 15.31(i)). x (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. x (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. x (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. x

The device is a modular approved radio in which the internal photos are kept permanent confidential. Because the internal and external photos are the same, there will not be an external photos exhibit.

Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 1 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. RES7CD Labeling Requirements Module Label A label will be silkscreened to the module. The size of this label will be no greater than 10x16mm. And will contain the following text: Module Label Picture FCC ID: 2ADCB-RES7CD IC: 6715C-RES7CD Acuity Brands Lighting Inc. RES7CD Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 2 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. Host Label A label will be affixed to the host device with the following text: The label will be properly sized to fit the application. If the host device is smaller than the palm of a hand, the label will be: The label will be properly sized to fit the application. Example: Contains FCC ID: 2ADCB-RES7CD Contains IC: 6715C-RES7CD Acuity Brands Lighting Inc. RES7CD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contains FCC ID: 2ADCB-RES7CD Contains IC: 6715C-RES7CD Acuity Brands Lighting Inc. RES7CD Acuity Brands Lighting, INC One Lithonia Way Conyers, GA 30012-3957 Tel: 770 922 9000 www.acuitybrands.com 3 | Page Confidentiality Notice: The information in this document is a property of Acuity Brands Lighting and is to be held in complete confidence. Any reproduction or redistribution of this document without the written consent of Acuity Brands Lighting is prohibited. User Manual: The RES7CD user manual will contain all information required to create a label.

Report File #: 7169008821R-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Exhibit: RF Exposure – FCC Colocated Transmitters FCC ID: 2ADCB-RES7CD Client Acuity Brands Lighting, Inc Product rES7CD Module Standard(s) FCC Part 15 Subpart 15.247 FCC KDB 447498:2015 Page 2 of 3 Report Issued: 12/14/2020 Report File #: 7169008821R-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. RF Exposure – FCC The device is a mobile device containing a 902 – 928 MHz proprietary transmitter and a 2400 – 2483.5 MHz BLE transmitter. It is intended to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure and the body of the user or nearby persons. Radiofrequency Radiation Exposure Evaluation: Mobile Devices Mobile devices shall be evaluated for RF radiation exposure according to the provisions of FCC §2.1091 and the MPE guidelines identified in FCC §1.1310. As per FCC §1.1310 Table 1(B), the limit for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields for General Population/Uncontrolled Exposure in the frequency range of 300 MHz to 1.5 GHz is f/1500 mW/cm 2 and in the frequency range of 1.5GHz to 100GHz is 1.0 mW/cm 2 . Where f = frequency in MHz. The power density formula is given by: P d = (P out *G) / (4*pi*R 2 ) Where, P d = Power density in mW/cm 2 P out = Conducted output power to antenna in mW G = Numeric Antenna Gain Pi = 3.1416 R = Separation distance in cm MPE Calculation: 904 – 926 MHz transmitter The DTS transmitter has a maximum conducted output power of 19.70dBm or 93.33mW and the highest antenna gain is 1.5dBi or 1.41 numerically. For a distance of 20cm, the power density is: P d = (93.33mW * 1.41) / (4 * 3.1416 * (20cm) 2 ) P d = 0.0262 mW/cm 2 The device passes the requirement. The calculated power density of 0.0262mW/cm 2 is below the (904/1500) = 0.6 mW/cm 2 limit. Client Acuity Brands Lighting, Inc Product rES7CD Module Standard(s) FCC Part 15 Subpart 15.247 FCC KDB 447498:2015 Page 3 of 3 Report Issued: 12/14/2020 Report File #: 7169008821R-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. MPE Calculation: 2402 – 2480 MHz transmitter The DTS transmitter has a maximum conducted output power of 13.98dBm or 25mW and the highest antenna gain is 3.0dBi or 2.0 numerically. For a distance of 20cm, the power density is: P d = (25mW * 2.0) / (4 * 3.1416 * (20cm) 2 ) P d = 0.0099 mW/cm 2 The device passes the requirement. The calculated power density of 0.0099mW/cm 2 is below the 1.0 mW/cm 2 limit. Calculations for Simultaneous Transmission As per FCC KDB447498 7.2: Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. MPE ratio = Ratio of power density to MPE limit, at the test frequency = P d / (MPE limit) Max MPE ratio for 915MHz = 0.0262 mW/cm 2 / 0.60 mW/cm 2 = 0.0437 Max MPE ratio for 2.4GHz = 0.0099 mW/cm 2 / 1.0 mW/cm 2 (worst case) = 0.0099 0.0099 + 0.0437 = 0.0536< 1.0 The EUT passed the requirements. Sum of power density ratio is < 1.0.

Registration # 6844A-3 Testing Laboratory Certificate #2955.02 R-14023, G-20072 C-14498, T-20060 Registration # CA6844 Page 1 of 119 Report Issued: 12/16/2020 Report File #: 7169008821RA-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. FCC 15 247 Rev3 EMC & RF Test Report As per RSS-247 Issue 2:2017 & FCC Part 15 Subpart 15.247 Unlicensed Intentional Radiators on the rES7CD Module BLE Transmitter Issued by: TÜV SÜD Canada Inc. 11 Gordon Collins Dr, Gormley, ON, L0H 1G0 Canada Ph: (905) 883-7255 Testing produced for See Appendix A for full client & EUT details. Prepared by: Raymond Au, Project Engineer Reviewed by: Amir Emami, Project Engineer Client Acuity Brands Lighting, Inc Product rES7CD Module – 2.4GHz BLE Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 2 of 119 Report Issued: 12/16/2020 Report File #: 7169008821RA-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Notes, Justifications, or Deviations ................................................................................... 6 Sample Calculation(s) ........................................................................................................ 7 Applicable Standards, Specifications and Methods ............................................................... 8 Document Revision Status ..................................................................................................... 9 Definitions and Acronyms ................................................................................................... 10 Testing Facility .................................................................................................................... 11 Calibrations and Accreditations ....................................................................................... 11 Testing Environmental Conditions and Dates ................................................................. 12 Detailed Test Results Section .............................................................................................. 13 6dB Bandwidth of Digitally Modulated Systems ............................................................ 14 Maximum Peak Envelope Conducted Power .................................................................. 20 Antenna Spurious Conducted Emissions (-20 dBc Requirement) ................................... 28 Transmitter Spurious Radiated Emissions ....................................................................... 46 Power Spectral Density .................................................................................................. 101 Power Line Conducted Emissions ................................................................................. 109 Appendix A – EUT Summary ............................................................................................ 115 Appendix B – EUT and Test Setup Photos ........................................................................ 119 Client Acuity Brands Lighting, Inc Product rES7CD Module – 2.4GHz BLE Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 3 of 119 Report Issued: 12/16/2020 Report File #: 7169008821RA-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Report Scope This report addresses the EMC verification testing and test results of the rES7CD Module, with 2.4 GHz BLE Transmitter. This unit is herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: RSS-247 Issue 2:2017 FCC Part 15 Subpart C 15.247 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc. accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc., unless otherwise stated. Client Acuity Brands Lighting, Inc Product rES7CD Module – 2.4GHz BLE Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 4 of 119 Report Issued: 12/16/2020 Report File #: 7169008821RA-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Summary The results contained in this report relate only to the item(s) tested. EUT: rES7CD Module – BLE FCC Certification #, FCC ID: 2ADCB-RES7CD Industry Canada Certification #, IC: 6715C-RES7CD EUT passed all tests performed Yes Tests conducted by Raymond Au Report reviewed by Amir Emami For testing dates, see "Testing Environmental Conditions and Dates". Client Acuity Brands Lighting, Inc Product rES7CD Module – 2.4GHz BLE Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 5 of 119 Report Issued: 12/16/2020 Report File #: 7169008821RA-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 15.203 Antenna Requirement Unique Pass See Justification FCC 15.205 RSS-GEN (Table 6) Restricted Bands for Intentional Operation QuasiPeak Average Pass See…

Text truncated - open the document above for the full version.

Registration # 6844A-3 Testing Laboratory Certificate #2955.02 R-14023, G-20072 C-14498, T-20060 Registration # CA6844 Page 1 of 103 Report Issued: 12/16/2020 Report File #: 7169008821RB-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. FCC 15 247 Rev3 EMC & RF Test Report As per RSS-247 Issue 2:2017 & FCC Part 15 Subpart 15.247 Unlicensed Intentional Radiators on the rES7CD Module 915MHz Proprietary Transmitter Issued by: TÜV SÜD Canada Inc. 11 Gordon Collins Dr, Gormley, ON, L0H 1G0 Canada Ph: (905) 883-7255 Testing produced for See Appendix A for full client & EUT details. Prepared by: Amir Emami, Project Engineer Reviewed by: Raymond Au, Project Engineer Client Acuity Brands Lighting, Inc Product rES7CD Module – 915MHz Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 2 of 103 Report Issued: 12/16/2020 Report File #: 7169008821RB-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Notes, Justifications, or Deviations ................................................................................... 6 Sample Calculation(s) ........................................................................................................ 7 Applicable Standards, Specifications and Methods ............................................................... 8 Document Revision Status ..................................................................................................... 9 Definitions and Acronyms ................................................................................................... 10 Testing Facility .................................................................................................................... 11 Calibrations and Accreditations ....................................................................................... 11 Testing Environmental Conditions and Dates ................................................................. 12 Detailed Test Results Section .............................................................................................. 13 6dB Bandwidth of Digitally Modulated Systems ............................................................ 14 Maximum Peak Envelope Conducted Power .................................................................. 18 Antenna Spurious Conducted Emissions (-20 dBc Requirement) ................................... 23 Transmitter Spurious Radiated Emissions ....................................................................... 31 Power Spectral Density .................................................................................................... 88 Power Line Conducted Emissions ................................................................................... 93 Appendix A – EUT Summary .............................................................................................. 99 Appendix B – EUT and Test Setup Photos ........................................................................ 103 Client Acuity Brands Lighting, Inc Product rES7CD Module – 915MHz Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 3 of 103 Report Issued: 12/16/2020 Report File #: 7169008821RB-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Report Scope This report addresses the EMC verification testing and test results of the rES7CD Module, with Proprietary 915MHz Transmitter. This unit is herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: RSS-247 Issue 2:2017 FCC Part 15 Subpart C 15.247 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc. accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc., unless otherwise stated. Client Acuity Brands Lighting, Inc Product rES7CD Module – 915MHz Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 4 of 103 Report Issued: 12/16/2020 Report File #: 7169008821RB-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Summary The results contained in this report relate only to the item(s) tested. EUT: rES7CD Module – 915MHz Proprietary FCC Certification #, FCC ID: 2ADCB-RES7CD Industry Canada Certification #, IC: 6715C-RES7CD EUT passed all tests performed Yes Tests conducted by Amir Emami Report reviewed by Raymond Au For testing dates, see "Testing Environmental Conditions and Dates". Client Acuity Brands Lighting, Inc Product rES7CD Module – 915MHz Standard(s) RSS 247 Issue 2:2017 FCC Part 15 Subpart 15.247 Page 5 of 103 Report Issued: 12/16/2020 Report File #: 7169008821RB-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Test Results Summary Standard/Method Description Class/Limit Result FCC 15.203 Antenna Requirement Unique Pass See Justification FCC 15.205 RSS-GEN (Table 6) Restricted Bands for Intentional Operation Qu…

Text truncated - open the document above for the full version.

Report File #: 7169008821R-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc. Exhibit: Test Set…

Text truncated - open the document above for the full version.