2ADTG-ARC800CAR DASH CAM

User Guide This product records videos while the vehicle is operating. Read and follow the instructions in this guide to properly use and maintain the product. Before using the product About the product This product records videos while the vehicle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record all events. The device may not record accidents with impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the vehicle’s battery voltage to deviate. Please read the user guide thoroughly before using this product. The manufacturer is not responsible for any accidents that occur due to not reading the user guide thoroughly. A PC meeting the minimum OS requirements is necessary for using all of this product's functions. Please check the "Using the mobile viewer" and "Using the PC viewer" sections later for details. Video recording does not begin until the product is completely turned on (booted up). To ensure that all vehicle events are recorded, wait until the product is completely booted up after turning it on, and then begin operating the vehicle. This product currently displays the product's status with LEDs. People who have difficulty distinguishing the colors of LEDs, such as those with color blindness or another color vision deficiency, should use it with caution. Depending on the vehicle's configuration or operating conditions, such as the installation of remote door lock devices, ECU settings, or TPMS settings, some product features may not be supported, and different firmware versions may influence the product's performance or features. About the user guide The information provided in the guide may change when the manufacturer updates its service policy. If the information provided changes, the THINKWARE website (www.thinkware.com) and its app will provide separate guidance. This user guide is intended for THINKWARE ARC 800 models only, and it may contain technical errors, editorial errors, or missing information. Copyrights All rights for the content and maps in this guide are reserved by THINKWARE and are protected under copyright laws. All unauthorized duplication, revision, publication, or distribution of this guide without written consent from THINKWARE is prohibited and is eligible for criminal charges. Registered trademarks THINKWARE ARC 800 is a registered trademark of THINKWARE. Other product logos and service names in this guide are trademarks of the relevant companies. Turning voice recording ON or OFF Some jurisdictions may prohibit recording voice in the vehicle or may require that all passengers have knowledge of the recording and provide consent before you record voice in the vehicle. It is your responsibility to know and follow all laws and restrictions for your jurisdiction. The device can record voice using the integrated microphone while recording video. Voice recording is ON by default. Please refer to the manual to turn voice recording on or off at any time. 3 Contents Safety information 4 1. Product overview 6 1.1 Included items 6 1.1.1 Standard items 6 1.1.2 Accessories (sold separately) 6 1.2 Part names 7 1.2.1 Front camera (main unit) - front view 7 1.2.2 Front camera (main unit) - rear view 8 1.2.3 Rear camera 8 1.3 Removing and inserting the memory card 9 1.4 Accessing recorded videos using a USB-C data cable 9 2. Installing the product 10 2.1 Installing the front camera (main unit) 10 2.1.1 Selecting an installation location 10 2.1.2 Securing the product 10 2.1.3 Connecting the power cable 12 2.2 Installing the rear camera 15 2.2.1 Selecting an installation location 15 2.2.2 Securing the rear camera 15 2.2.3 Connecting the rear camera cable 16 3. Using recording features 18 3.1 Turning the product on or off 18 3.2 Using the LCD display 18 3.3 Learning about the LED indicator and file storage locations 18 3.4 Using the continuous recording feature 19 3.5 Recording manually 19 3.6 Using the SOS recording feature (optional) 20 3.7 Using parking mode 20 3.8 Using the Night Vision 21 3.9 Using the High Dynamic Range (HDR) 22 3.10 About the screen layout 22 3.10.1 Live view screen 22 3.10.2 Quick menu screen 23 3.11 Playing videos 24 4. Using the road safety and ADAS features 26 4.1 Road safety features 26 4.2 ADAS features 26 4.2.1 Identifying the vehicle type 26 4.2.2 ADAS safety features 27 5. Settings 28 5.1 Setting the Camera 28 5.2 Setting road safety features and ADAS features 28 5.3 Setting recording features 29 5.4 Configuring the system settings 30 5.5 Managing the memory card 31 6. Using the mobile viewer 32 6.1 Connect the product to a smartphone 32 7. Using THINKWARE CONNECTED (optional) 33 7.1 Installing the THINKWARE CONNECTED LTE Module (optional) 33 7.2 Connecting the product to THINKWARE CONNECTED 34 8. Using the PC viewer 35 8.1 System requirements 35 8.2 Learning about the PC viewer 35 8.2.1 Downloading the PC viewer 35 8.2.2 PC viewer screen layout 36 9. Upgrading the firmware 37 10. Troubleshooting 38 11. Specifications 39 4 Safety information Read the following safety information to properly use the product. Safety symbols in this guide "Warning" - Indicates a potential hazard which, if not avoided, may result in injury or death. "Caution" - Indicates a potential hazard which, if not avoided, may result in minor injury or property damage. "Note" - Provides useful information to help users better utilize the product’s features. Safety information for proper use Driving and product operation • Do not operate the product while driving a vehicle. Distraction while driving may cause accidents and result in injury or death. • Install the product in places where the driver’s view is not obstructed. Obstruction of the driver’s vision may cause accidents and result in injury or death. Check with your state and municipal laws before mounting the product to the windshield. Power supply • Do not operate or handle the po…

Text truncated - open the document above for the full version.

Certification Attestation Statements Attn: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 22, 2026 FCC ID: 2ADTG-ARC800 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing THINKWARE CORPORATION certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. THINKWARE CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing THINKWARE CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature Name: Musung, Kim. Title: Manager Company: THINKWARE CORPORATION Tel # : +82-02-589-9425

Rev 1/26/2023 Attn: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 22, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: FCC ID : 2ADTG-ARC800 Applicant’s FRN : 0024149957 THINKWARE CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, Thinkware Systems USA Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. THINKWARE CORPORATION accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Thinkware Systems USA Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Thinkware Systems USA Inc. FRN: 0033574567 Address: 18019 Sky Park Circle, Suite L, Irvine, CA 92614 Contact Person: Patrick Bong Email: [email protected] Sincerely, THINKWARE CORPORATION Thinkware Systems USA Inc. Musung, Kim. Patrick Bong [Insert Applicant signature] [U.S. Agent signature]

THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 Date:June 22, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 Regarding FCC & IC Application FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 We, THINKWARE CORPORATION, declare that the device does not support channel 12 ~ 13 in 2.4 GHz band. The firmware setting is not accessible by end users and/or unauthorized 3rd parties. Signature: Mr Mu Sung Kim / manager THINKWARE CORPORATION

THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 Date: June 22, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Regarding Application FCC ID : 2ADTG-ARC800 Reuse of test reports of FCC ID : 2AATL-6221ASRC for new Certification We, THINKWARE CORPORATION, here by declare our product Model name: ARC 800 (FCC ID : 2ADTG-ARC800 ) will reuse test reports of product Module Model name: FG6221ASRC-0L (FCC ID : 2AATL-6221ASRC) as difference declaration as follow; 1. Our product integrated Bluetooth & WLAN Module (FCC ID : 2AATL-6221ASRC), And the version is identical to that specified in the module test report. So conducted test data re-used (FCC Report No. E04A24070678F00103, E04A24070678F00104) 2. Radiation emission re-tested and reported in Report (Report Number: KES-RF260201, KES-RF260202, KES-RF260203) 3. The module installed in our product operates only in WLAN mode. 4. The applicant hereby confirms that the certified module, FCC ID: 2AC7Z-ESPS3WROOM1, has been integrated into the host device in full complia nce with the module grantee’s installation and integration instructions. The module has been implemented without any hardware modifications or software chang es that would affect the RF characteristics or compliance performance. The power supply conditions, and operating configurations are consistent with those descr ibed in the original module certification. Therefore, the applicant confirms that the conducted test data from the original module ce rtification remain applicable and valid for this host integration. THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 Sincerely Yours, Mr Mu Sung Kim / manager THINKWARE CORPORATION

THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 Date: June 22, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 Confidentiality Request regarding application for certification of FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules and IC regulation, we hereby request confidential treatment of information accompanying this application as outlined below: PERMANENT Exhibit Type File Name Part List Part List.pdf Schematics Diagram(s) Schematic.pdf Operation description Operation description.pdf Block diagram Block diagram.pdf And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mr Mu Sung Kim / manager THINKWARE CORPORATION

THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 Date: June 22, 2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Chief, Certification and Engineering Bureau Industry Canada 1241 Clyde Avenue Ottawa, Ontario Canada K2C 1Y3 FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 To whom it may concern: I, the undersigned, hereby authorize Young-Jin, Lee of KES Co., Ltd. and hereafter referred to as KES Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Young-Jin, Lee of KES Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KES Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product THINKWARE CORPORATION A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Tel: +82-2-589-9425 / Fax: +82-2-589-9600 certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mr Mu Sung Kim / manager THINKWARE CORPORATION REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 1 of 3 External photos FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 2 of 3 FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 3 of 3 Blank

FCC ID : 2ADTG-ARC800 IC Number : 12594A-ARC800 Page 1 of 1 Label & Label Location The device is so small that it is not practicable to place the statement specified under 15.19 statement request, the information required by this paragraph shall be placed in a prominent location in the User’s Manual.

FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 1 of 5 Internal photos FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 2 of 5 FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 3 of 5 FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 4 of 5 FCC ID : 2ADTG-ARC800 IC number : 12594A-ARC800 Page 5 of 5

FCC ID : 2ADTG-ARC800 Page 1 of 1 RF exposure According to FCC part 1.1310 : The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in § 1.1307(b) Limits for Maximum Permissible Exposure (MPE) f= frequency in ㎒ Friis transmission formula: Pd = (Pout×G)/(4×pi×R 2 ) Where, Pd = power density in ㎽/㎠ Pout = output power to antenna in ㎽ G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd the limit of MPE, 1 ㎽/㎠. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Results Operation mode Frequency (㎒) Max Tune-up Average Power(㏈m) Antenna gain (㏈i) Power density at 20 ㎝(㎽/㎠) Limit (㎽/㎠) 802.11b 2 412 ~ 2 462 14.0 1.47 0.007 01 1 802.11g 13.0 0.005 57 802.11n_HT20 13.0 0.005 57 802.11n_HT40 2 422 ~ 2 452 13.0 0.005 57 802.11a 5 180 ~ 5 240 10.0 2.54 0.003 57 802.11n_HT20 8.0 0.002 25 802.11ac_VHT20 8.0 0.002 25 802.11n_HT40 5 190 ~ 5 230 9.0 0.002 84 802.11ac_VHT40 8.0 0.002 25 802.11ac_VHT80 5 210 9.0 0.002 84 Frequency range (㎒) Electric field strength(V/m) Magnetic field strength (A/m) Power density (㎽/㎠) Average time (A) Limits for Occupational / Control Exposures 300 – 1 500 -- -- f/300 6 1 500 - 100000 -- -- 5 6 (B) Limits for General Population / Uncontrol Exposures 300 – 1 500 -- -- f/1500 6 1 500 – 100 000 -- -- 1 30

TEST REPORT Report No. : KES-RF260201 Page1/41 KES Co., Ltd. #3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si,Gyeonggi-do, 14057, Republic ofKorea Tel : +82-31-425-6200, Fax : +82-31-341-3838 KES-QP16-F01(00-23-01-01)KES Co., Ltd. You can check the authenticity of this test report on the authenticity verification page on our website (www.kes.co.kr). FCC & IC TEST REPORT 1. Client ○ Name : THINKWARE CORPORATION ○ Address : A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea 2. Sample Description ○ Product item : CAR DASH CAM ○ Model name : ARC 800 ○ Manufacturer etc. : THINKWARE CORPORATION 3. Date of test :2026.06.16 ~ 2026.06.18 4. Location of Test :Permanent Testing LabOn Site Testing ○ Address : 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, 12658, Rep. of Korea 5. Test method used :Part 15 Subpart C 15.247, RSS-247 (Issue 4), RSS-Gen (Issue 5) 6. Test result :PASS The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced and copied without permission without the written consent of KES Co., Ltd. This laboratory is not accredited for the test results marked *. This test report is not related to KOLAS accreditation. Affirmation Tested byTechnical Manager Name : Myeong-Ho, Lee(Signature) Name :Yeong-Jun Cho(Signature) 2026. 06. 24. KES Co., Ltd. Report No. : KES-RF260201 Page2/41 KES-QP16-F01(00-23-01-01)KES Co., Ltd. You can check the authenticity of this test report on the authenticity verification page on our website (www.kes.co.kr). REPORT REVISION HISTORY DateTest Report No.Revision History 2026.06.24KES-RF260201Initial This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. Report No. : KES-RF260201 Page3/41 KES-QP16-F01(00-23-01-01)KES Co., Ltd. You can check the authenticity of this test report on the authenticity verification page on our website (www.kes.co.kr). TABLE OF CONTENTS 1.General information ................................................................................................................................... 4 1.1.EUT description .......................................................................................................................... 4 1.2.Test configuration........................................................................................................................ 5 1.3.Information about derivative model ............................................................................................ 5 1.4.Accessory information ................................................................................................................ 5 1.5.Device modifications................................................................................................................... 5 1.6.Sample calculation ..................................................................................................................... 5 1.7.Worst case data rate................................................................................................................... 5 1.8.Measurement Uncertainty .......................................................................................................... 6 1.9.Frequency/channel operations ................................................................................................... 6 2.Summary of tests ....................................................................................................................................... 8 3.Test results ................................................................................................................................................. 9 3.1.Output power .............................................................................................................................. 9 3.2.Radiated restricted band and emissions ...................................................................................11 3.3.Antenna Requirement............................................................................................................... 40 Appendix A. Measurement equipment.......................................................................................................... 41 Report No. : KES-RF260201 Page4/41 KES-QP16-F01(00-23-01-01)KES Co., Ltd. You can check the authenticity of this test report on the authenticity verification page on our website (www.kes.co.kr). 1.General information Applicant:THINKWARE CORPORATION Applicant address:A, 9FL., Samwhan Hipex, 240, Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Test site:KES Co., Ltd. Test site address:#3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Rep. of Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, 12658, Rep. of Korea Test FacilityFCC Accreditation Designation No.: KR0100, Registration No.: 444148 ISED Registration No.: 23298 FCC rule part(s):15.247 FCC ID:2ADTG-ARC800 IC rule part(s):RSS-247 (Issue 4), RSS-Gen (Issue 5) IC Number:12594A-ARC800 Test device serial No.:ProductionPre-productionEngineering 1.1.EUT description Equipment under testCAR DASH CAM Frequency range & Number of channels 2 412㎒~ 2 462㎒(802.11b/g/n_HT20) : 11 ch 2 422㎒~ 2 452㎒(802.11n_HT40) : 7 ch UNII-1 for FCC 5 180㎒~ 5 240㎒(802.11a/n_HT20/ac_VHT20) : 4 ch 5 190㎒~ 5 230㎒(802.11n_HT40/ac_VHT40) : 2 ch 5 210㎒(802.11ac_VHT80) : 1 ch UNII-3 for IC 5 745㎒~ 5 825㎒(802.11a/n_HT20/ac_VHT20) : 5 ch 5 755㎒~ 5 795㎒(802.11n_HT40/ac_VHT40) : 2 ch 5 775㎒(802.11ac_VHT80) : 1 ch ModelARC 800 Modulation techniqueDSSS, OFDM Antenna specification 2.4㎓bandChip Antenna // Peak gain: 1.47㏈i UNII-1 Chip Antenna // Peak gain: 2.54㏈i U…

Text truncated - open the document above for the full version.

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C ISED RSS-247 ISSUE 3 (DTS) TEST REPORT For WIFI+BT module MODEL NUMBER: FG6221ASRC-0L REPORT NUMBER: E04A24070678F00103 ISSUE DATE: September 30, 2024 FCC ID: 2AATL-6221ASRC IC: 12425A-6221ASRC Prepared for FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned Product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A24070678F00103 Page 2 of 47 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 September 30, 2024 Initial Issue Jok Yang REPORT NO.: E04A24070678F00103 Page 3 of 47 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2013, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 N/A Conducted Output Power ANSI C63.10-2013, Clause 11.9.1.3 FCC Part 15.247 (b)(3) RSS-247 Clause 5.4 (d) Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2013, Clause 11.8.1 FCC Part 15.247 (a)(2) RSS-247 Clause 5.2 (a) ISED RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2013, Clause 11.10.2 FCC Part 15.247 (e) RSS-247 Clause 5.2 (b) Pass Conducted Band edge and spurious emission ANSI C63.10-2013, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 5.5 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2013, Clause 11.11 & Clause 11.12 FCC Part 15.247 (d) FCC Part 15.205/15.209 RSS-247 Clause 5.5 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2013, Clause 11.6 None; for reporting purposes only. Pass *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C, ISED RSS-247 ISSUE 3 (DTS)> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A24070678F00103 Page 4 of 47 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 8 5.3. Maximum Peak Output Power ................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................ 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ......................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 10 5.8. SETUP DIAGRAM .................................................................................................. 10 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 12 7. ANTENNA PORT TEST RESULTS ..................................................................................... 14 7.1. Conducted Output Power ........................................................................................ 14 7.2. 6dB Bandwidth and 99% Occupied Bandwidth ....................................................... 15 7.3. Power Spectral Density ........................................................................................... 17 7.4. Conducted Band edge and spurious emission ........................................................ 18 7.5. Duty Cycle .............................................................................................................. 20 8. RADIATED TEST RESULTS ............................................................................................... 21 8.1. Radiated Band edge and Spurious Emission ............…

Text truncated - open the document above for the full version.