2AENY348-212816 LED PUFF LIGHT 3CCT SPEAKER

Questions, problems, missing par ts? Bef or e ret ur ni ng to your ret ai ler , call our customer service at 1-800-887-6326 Monday – Friday 9: 00 a. m. – 5:00 p. m. CST SKU Number: 348-2128 LED BLUETOOTH SPEAKER Model Number: C7260 HARDWARE CONTENTS Note: Hardware not shown actual size. PACKAGE CONTENTS A B Page 1 of 6 200713 AA Mounting Strap X1 Short Screw X2 Mounting Screw X2 Wire Connector X3 BB DD CC FLUSH MOUNT 3CCT SAFETY INFORMATION ASSEMBLY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock. • LED electronics can be damaged by electro static discharge (ESD)shock. Before installation, discharge yourself by touching a grounded bare metal surface to remove this hazard. To avoid damage, do not touch the LED module. CAUTION • All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact your municipal building department to learn about your local codes, permits and/or inspections. • Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician before installation. • Do not connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. If you are not sure your lighting system has a grounding means, do not attempt to install this fixture. Contact a qualified, licensed electrician for information with regards to proper grounding methods as required by the local electrical code in your area. Turn off the power at fuse or circuit box. 1. Attach two short screws (CC) to the holes on the mounting strap (AA). Thread them in part way: 2 to 3 turns only. 3. Connect fixture black wire to house black wire and fixture white wire to house white wire using wire connectors (DD) provided. Connect the copper wire or green/yellow wire on the light fixture to the mounting strap (AA) by securing it with the preinstalled grounding screw, then connect it to the house grounding wire with wire connectors (DD). Tuck all the wires into outlet box. AA CC 1 2. Attach the mounting strap (AA) to the outlet box using two mounting screws (BB). 4 . Remove the insulated paper before installing the fixture. Page 2 of 6 200713 2 AA BB Insulated Paper 4 Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Tools Required for Assembly (not included): Screwdriver, Phillips Screwdriver, Pliers, Electrical Tape, Wire Cutters, Safety Glasses, Ladder. This fixture is dimmable with a forward phase electronic dimmer. Dimmers tested to be compatible with this fixture are the Lutron: TGCL-153PH, MACL-153MH, SCL-153P, DVWCL-153PH. If you are unfamiliar with electrical installation, it is recommended to use a qualified electrician for your installation(s). PREPARATION 3 AA DD Page 3 of 6 200713 Turn on the power at fuse or circuit box. 6. Attach the plastic shade (B) to the ceiling pan (A) by aligning studs and slots, then turn it clockwise until it is locked in place. Stud A 6 Slot B ASSEMBLY INSTRUCTIONS (continued) 5. Attach the ceiling pan(A) to the monnting strap (AA) by inserting two screw (CC) heads into the key holes and rotate the ceiling pan (A) until it is locked in place. Then secure the screws tightly. A 5 CC CHANGING BATTERIES Replacing Battery Steps 1. Remove the battery cover from the fixture with screwdriver. 2. Replace the old battery with a new battery 7188BB. 3. Re-attach the battery cover to the fixture with screwdriver. 8 Battery Cover Battery Fixture Adjus�ng the color Temperature of the Light Customizing the color temperature of LED light by moving toggle switch. 7-a7-b View Fig.1-b a. Move the toggle switch to 3000K, the color temperature is set at 3000K. b. Move the toggle switch to 4000K, the color temperature is set at 4000K. c. Move the toggle switch to 5000K, the color temperature is set at 5000K. Notice: Please move the toggle switch to make your selection before attaching plastic shade (B) to the ceiling pan (A). A B Color Temperature Toggle Switch OPERATING THE DOWNLIGHT AND BLUETOOTH SPEAKERS Bluetooth Connection Steps: 1. Once turn on power , t he Bluet ooth Speakers a re enabled and r eady to c onn ect. 2. Enabl e Bluet ooth on your smart device. 3. Wai t for the smart dev ic e to detect the ceiling light and then select it to pa ir the device t o the speakers. When suc cessful ly pa ir ed, the speaker will response "Connected". 4. Pla y mus ic fr om your device while conn ected to the ceiling light to enjoy soun d from the Bluet ooth speakers. 5. Disconnect the ceiling light from Bluet ooth on your smart de vice, or di sab le Bluet ooth functiona lity on your smart device when soun d is not w an ted from t he ceiling light speakers. NOTICE: 1. Bluetooth enabled smart devices typically have a range of approximately 33 ft. (10 m). Attempting to pair your smart device to the Bluetooth speakers beyond the intended range can result in poor audio quality, drop-outs, or failure to connect. 2. Only one device can be connected to the Bluetooth speakers at a time. 3. The speaker includes a battery (18650 type 2000mAh). The speakers can continue working even turn off the light by dimmer or switch. If the speaker battery run out of power, it will blue indic…

Text truncated - open the document above for the full version.

SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage1of2Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] ProjectandProduct Certification Representative AuthorizationLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 Revisedwording(obsolete)1.02.0Sept–25-2007 Updatedcompanytemplate(obsolete)2.03.0Jan-31-2012 Updatedletterinformation(obsolete)3.04.0May-23-2014 AddedFCCIDfield(obsolete)4.05.0Sep-16-2014 Updatedcompanyname&logo(current)5.06.0Jun-27-2018 SCS-F18:ProjectandProductCertificationRepresentativeAuthorizationLetterPage2of2Rev6.0 LuminexInternationalCo.,Ltd (2020-07-21) To:BVCPS,INC. 775MontagueExpressway, Milpitas,CA95035 USA DearSir/Madam, Re:ProductCertificationRepresentativeAuthorizationLetter We,_____LuminexInternationalCo.,Ltd___herebyauthorizeBVCPS,Inc.toact asaCertificationBodyforcertifyingforthefollowingproject(s): Product::16"LEDPUFFLIGHT3CCTSPEAKER M/N:3348-2128,C7260 FCCID:2AENY348-2128 Sincerely, AvianDai Manager LuminexInternationalCo.,Ltd 5F,No.30,YeeShienRd.,Taipei,Taiwan

SCS-F19:ConfidentialityRequestLetterPage 1 of 2 Rev6.0 775MontagueExpressway Milpitas,CA95035 Tel:408-526-1188 Fax:408-526-1088 Email: [email protected] m Confidentiality RequestLetter ReasonforAmendment(current/obsolete) RevisionHistory ApprovedDate FromTo InitialRelease(obsolete)1.01.0Nov-14-2006 AddingCFR2.459(obsolete)1.02.0August–11-2008 Updatedcompanytemplate&Addedtext box(obsolete) 2.03.0Jan-31-2012 AddedICconfidentialityletterform (obsolete) 3.04.0March-26-2015 CorrectionstoSTCform.Addedreference toKDB(obsolete) 4.05.0Nov-19-2015 Updatedcompanylogo(current)5.06.0Jun-26-2019 SCS-F19:ConfidentialityRequestLetterPage 2 of 2 Rev6.0 LuminexInternationalCo.,Ltd (2020-7-21) To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD Subject:PermanentConfidentialityRequestforFCCID:2AENY348-2128 Pursuanttosections0.457and0.459ofCFR47,werespectfullyrequestpermanent confidentialtreatmentofthefollowingExhibitsaccompanyingthisapplicationas: -BlockDiagram -Schematics -OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanying documentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, AvianDai Manager LuminexInternationalCo.,Ltd 5F,No.30,YeeShienRd.,Taipei,Taiwan

LuminexInternationalCo.,Ltd Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent. ProductionnameTrademarkFCCIDModelno. 16"LEDPUFF LIGHT3CCT SPEAKER Luminex,Vaxcel, PatriotLighting, SmartElectrician 2AENY348-2128348-2128,C7260 Sincerely, AvianDai Manager LuminexInternationalCo.,Ltd 5F,No.30,YeeShienRd.,Taipei,Taiwan

Label: LabelLocation:

ANTENNA

RFEXPOSUREEVALUATION EUTSpecification EUT16"LEDPUFFLIGHT3CCTSPEAKER ModelNumber348-2128,C7260 FCCID2AENY348-2128 Antennagain(Max)0dBi OperationFrequency2402-2480MHz InputRatingAC120V/60Hz,0.15A Modulation GFSK,π/4-DQPSK Max.outputpower3.27dBm(0.0021W) TestRequirement: AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 11.1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotal powerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. 11.2MeasurementResult Antennagain:0dBi BR+EDR: Mode Channe lFreq. (MHz) Measu red power (dBm) Tune- up power (dBm) Max tune-up power (dBm) Antenn a Gain Numeri c Evaluation result (mW/cm2) Power density Limits (mW/c m2) GFSK24022.823±1410.00051 GFSK24412.773±1410.00051 GFSK24802.773±1410.00051 π/4- DQPSK 24023.273±1410.00051 π/4- DQPSK 24413.043±1410.00051 π/4- DQPSK 24803.043±1410.00051 Signature: AlanHe Date:2020-07-20

Report No.: EA2005326F02001 1 of 71 DongGuan Anci Electronic Technology Co., Ltd 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. Phone: 86-769- 8507 5888; Fax: 86-769- 8507 5898 E-mail: [email protected] Rev. 1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF 16" LED PUFF LIGHT 3CCT SPEAKER Model No.: 348-2128, C7260 Trademark: Luminex, Vaxcel, Patriot Lighting, Smart Electrician FCC ID:2AENY348-2128 Report No.: EA2005326F02001 Issue Date: July 17, 2020 Prepared for Luminex International Co., Ltd 5F, No.30, Yee Shien Rd., Taipei, Taiwan Prepared by Dong Guan Anci Electronic Technology Co., Ltd. 1-2 Floor, Building A, No.11, Headquarters 2 Road, Songshan, Lake Hi-tech Industrial Development Zone, Dongguan City, Guangdong Pr., China. This report shall not be reproduced, except in full, without the written approval of Dong Guan Anci Electronic Technology Co., Ltd. Report No.: EA2005326F02001 2 of 71 TRF No.: FCC 15.247/A Rev. 1.0 VERIFICATION OF COMPLIANCE Applicant: Luminex International Co., Ltd 5F, No.30, Yee Shien Rd., Taipei, Taiwan Manufacturer: Luminex International Co., Ltd 5F, No.30, Yee Shien Rd., Taipei, Taiwan Product Description: 16" LED PUFF LIGHT 3CCT SPEAKER Trade Mark: Luminex, Vaxcel, Patriot Lighting Model Number: 348-2128, C7260 ( All models are identical except for the model and trademark, so we choose 348-2128 to do all the tests.) We hereby certify that: The above equipment was tested by Dong Guan Anci Electronic Technology Co., Ltd.The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2019). Date of Test : June 24, 2020 to July 16, 2020. Prepared by : Tomas Yang/Supervisor Reviewer & Authorized Signer : Alan He/Manager Report No.: EA2005326F02001 3 of 71 TRF No.: FCC 15.247/A Rev. 1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / EA2005326F02001 Report No.: EA2005326F02001 4 of 71 TRF No.: FCC 15.247/A Rev. 1.0 Table of Contents 1. GENERAL INFORMATION ......................................................................................................... 6 1.1 PRODUCT DESCRIPTION ............................................................................................................................. 6 1.2 TEST METHODOLOGY ................................................................................................................................. 6 1.3 TEST FACILITY ............................................................................................................................................. 7 2. SYSTEM TEST CONFIGURATION............................................................................................... 8 2.1EUT CONFIGURATION ................................................................................................................................. 8 2.2 EUT EXERCISE..................................................................................................................................... 8 2.3 TEST PROCEDURE..................................................................................................................................... 8 2.4CONFIGURATION OF TESTED SYSTEM ........................................................................................................ 9 3. SUMMARY OF TEST RESULTS ................................................................................................. 10 4. DESCRIPTION OF TEST MODES .............................................................................................. 11 5. TEST SYSTEM UNCERTAINTY .................................................................................................. 12 6. CONDUCTED EMISSIONS TEST ............................................................................................... 13 6.1MEASUREMENT PROCEDURE: ................................................................................................................... 13 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ......................................................................... 13 6.3MEASUREMENT EQUIPMENT USED: .......................................................................................................... 13 6.4 MEASUREMENT RESULT: .......................................................................................................................... 13 CONDUCTED MEASUREMENT PHOTOS: ......................................................................................................... 15 6.5 CONDUCTED MEASUREMENT PHOTOS: ................................................................................................... 16 7. RADIATED EMISSION TEST ....................................................................................................... 17 7.1MEASUREMENT PROCEDURE .................................................................................................................... 17 7.2TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .......................................................................... 19 7.3 MEASUREMENT EQUIPMENT USED: ......................................................................................................... 20 7..4 RADIATED EMISSION LIMIT ...................................................................................................................... 21 7.5 MEASUREMENT RESULT ......................................................................................................................... 22 7.5 RADIATED MEASUREMENT PHOTOS: ..........................................................................................…

Text truncated - open the document above for the full version.