2AEU3TSLEAKSensor device with wireless connection

LEAK USER INSTRUCTIONS 1. INTENDED USE OF LEAK LEAK is a sensor device to detect water leakage. The device reports the resistance value between the detecting pins and sends this information to a Wirepas protocol mesh network. The device has also sensors for temperature, ambient light, magnetism and acceleration and it includes an LED for indication purposes. It has also sensors for humidity and air pressure but this data is not useful because of the closed structure of the device. Typically LEAK is used together with MTXH Thingsee Gateway in use cases where the measurements are performed in several locations and this data is wirelessly collected and sent via 2G cellular connection to a data server / cloud. 2. GENERAL The device covers are ultra sonic welded together to get a robust structure against moisture and dust. Batteries cannot be changed. When delivered, the device is in a very low current consumption mode. When taken into use, it needs to be switched on with a magnet switch tool: Once the device is switched on, it wakes up and starts scanning for nearby Wirepas devices having the same network ID. 3. PRECAUTIONS Operating temperature range for the device is -20...+50 °C due to battery specifications. 4. LEGAL NOTICES Hereby, Haltian Products Oy declares that the radio equipment type LEAK is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://haltian.com Haltian Products Oy vakuuttaa, etta radiolaitetyyppi LEAK on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://haltian.com LEAK operates at Bluetooth® 2.4 GHz frequency band. Maximum radio-frequency power transmitted is +4.0 dBm. Manufacturer name and address: Haltian Products Oy Yrttipellontie 1 D 90230 Oulu Finland FCC REQUIREMENTS FOR OPERATION IN THE UNITED STATES FCC Information for the User This product does not contain any user serviceable components and is to be used with approved, internal antennas only. Any product changes of modifications will invalidate all applicable regulatory certifications and approvals. FCC Guidelines for human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 10 mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communications Commission Statement This device complies with Part 15 Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods: • Increase the separation between the equipment and the receiver. • Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected • Consult the dealer or and experienced radio/TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la nor me RSS-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable Radiation Exposure Statement : This device complies with ISED radiation exposure limits set forth for an uncontrolled environment. NOTE IMPORTANTE: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10 mm entre le radiateur et votre corps. FCC ID: 2AEU3TSLEAK IC ID: 20236-TSLEAK

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 15.10.2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: 2AEU3TSLEAK We, Haltian Products Oy Yrttipellontie 1 D 90230 Oulu, Finland hereby authorize Grant4Com Oy Yrttipellontie 6 90230 Oulu, Finland Mr. Jukka Ollila e-mail: [email protected] Phone: +358405433264 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Jyrki Okkonen Title: CTO, COB Company: Haltian Products Oy Telephone: +358405459870 e-mail: [email protected] DocuSign Envelope ID: EEE22164-0EE3-44C9-B1A3-AC11BBB02E92

APPLICANT LETTERHEAD FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 15.10.2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: 2AEU3TSLEAK To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Haltian Products Oy hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. DocuSign Envelope ID: EEE22164-0EE3-44C9-B1A3-AC11BBB02E92 APPLICANT LETTERHEAD FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Sincerely, __________________________ By: Jyrki Okkonen Title: CTO, COB Company: Haltian Products Oy Telephone: +358405459870 e-mail: [email protected] DocuSign Envelope ID: EEE22164-0EE3-44C9-B1A3-AC11BBB02E92

LEAK photos 1 PWB bottom 2 PWB top 3 Product general 4 Product top 5 Product bottom

LEAK Type label markings for FCC/ISED

LEAK photos 1 PWB bottom 2 PWB top 3 Product general 4 Product top 5 Product bottom

Copyright©Verkotan FCC SAR test report_Thingsee Leakage Rugged_ID4476_21102020_2.docx SAR Compliance Test Report Date of Report 21/10/2020 Client’s Contact person: Juha Pikkarainen Number of pages: 4 Responsible Test engineer: Kirsi Kyllönen Testing laboratory: Verkotan Oy Elektroniikkatie 17 90590 Oulu Finland Client: Haltian Products Oy Yrttipellontie 1D 90230 Oulu Finland Tested devices Thingsee Leakage Rugged Related reports: - Testing has been carried out in accordance with: 47CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices FCC published RF exposure KDB procedures Documentation: The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory Test Results: The DUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document Date and signatures: 21.10.2020 For the contents: Laboratory Manager Copyright©Verkotan FCC SAR test report_Thingsee Leakage Rugged_ID4476_21102020_2.docx TABLE OF CONTENTS 1. SUMMARY OF SAR TEST REPORT ............................................................................................... 4 1.1 TEST DETAILS ........................................................................................................................... 4 1.2 EVALUATION RESULTS ............................................................................................................ 4 2. DESCRIPTION OF THE DEVICE UNDER TEST (DUT) .................................................................... 4 2.1 SUPPORTED FREQUENCY BANDS AND OPERATIONAL MODES ............................................. 4 2.2 TEST EXCLUSIONS ................................................................................................................... 5 3. OUTPUT POWER ............................................................................................................................ 5 3.1 MAXIMUM DEFINED OUTPUT POWER .................................................................................... 5 4. RESULTS.......................................................................................................................................... 5 Copyright©Verkotan FCC SAR test report_Thingsee Leakage Rugged_ID4476_21102020_2.docx 1. SUMMARY OF SAR TEST REPORT 1.1 Test Details Device under Test (DUT): Product: Thingsee Leakage Rugged Manufacturer: Haltian Products Oy Model: LEAK Hardware Version: PD2_03 FCC ID: 2AEU3TSLEAK Document ID: FCC SAR test report_Thingsee Leakage Rugged_ID4476_21102020_2.docx 1.2 Evaluation Results The device conforms to the requirements of the standards when the maximum output power is less than or equal to the Test Exclusion Threshold Limit. 2. DESCRIPTION OF THE DEVICE UNDER TEST (DUT) Thingsee Leakage Rugged is primarily used for water leakage detection and resulting data is sent wirelessly to a Wirepas protocol mesh network. The device has also sensors for temperature, ambient light, magnetism and acceleration measurement. Exposure Environment General population, uncontrolled 2.1 Supported Frequency Bands and Operational Modes Bands Modes of Operation Transmitter Frequency Range (MHz) 2.4 Wirepas 2.402- 2.480 Regulator System Equipment Class Test Exclusion Threshold/ Exemption Limit at 10mm separation [mW] Maximum Output Power [mW] Result FCC BT DTS 19 2.5 PASS Copyright©Verkotan FCC SAR test report_Thingsee Leakage Rugged_ID4476_21102020_2.docx 2.2 Test Exclusions FCC SAR test exclusion thresholds in 447498D01 are shown in a table below. 3. OUTPUT POWER 3.1 Maximum defined Output Power Transmission mode Output power [dBm] Output power [mW] Wirepass 4.0 2.5 4. RESULTS According Appendix A in 447498D01 the SAR test exclusion power threshold for 2450MHz is 19mW at 10 mm separation distance. The maximum output power of the DUT is 2.51mW thus it is below the test exclusion threshold.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66212REM.001 2020-10-23 Test report No: NIE: 66212REM.001 Test report FCC Rules and Regulations CFR 47, Part 15, Subpart B (10-1-19 Edition) & ICES-003 Issue 6 (Updated 2019-04) (*) Identification of item tested Sensor device with Wirepas mesh network connectivity (*) Trademark Thingsee Leakage Rugged (*) Model and /or type reference LEAK Other identification of the product HW version: PD2_03 SW version: 2020.06.16.3_ts_pod4leakage FCC ID: 2AEU3TSLEAK IC: 20236-TSLEAK (*) Features Measurement of resistance, temperature, ambient light, magnetism and acceleration. Wirepas protocol stack using BT LE radio. Manufacturer HALTIAN PRODUCTS OY Yrttipellontie 1 D, 90230 Oulu, Finland Test method requested, standard FCC CFR 47, Part 15, Subpart B (10-1-19 Edition) & ICES-003 Issue 6 (Updated 2019-04) Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López Martín EMC Consumer & RF Lab. Manager Date of issue 2020-10-23 Report template No FDT08_22 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66212REM.001 Page 2 of 16 2020-10-23 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 4 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 5 Identification of the client............................................................................................................. 6 Testing period and place ............................................................................................................. 6 Document history ........................................................................................................................ 6 List of equipment used during the test......................................................................................... 6 Environmental conditions ............................................................................................................ 7 Remarks and comments ............................................................................................................. 8 Testing verdicts ........................................................................................................................... 8 Summary .................................................................................................................................... 8 Appendix A: Test results ............................................................................................................. 9 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66212REM.001 Page 3 of 16 2020-10-23 Competences and guarantees DEKRA Testing and Certification is a testing laboratory accredited by the National Accreditation Body (ENAC - Entidad Nacional de Acreditación), to perform the tests indicated in the Certificate No. 51/LE 147. DEKRA Testing and Certification is a FCC recognized accredited testing laboratory with appropriate scope of accreditation that include testing performed in this test report, FCC designation number ES0004. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification at the time of performance of the test. DEKRA Testing and Certification is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the DEKRA Testing and Certification internal document PODT000. The total uncertainty of the measurement system for the measured radio disturbance characteristics of EUT from 30 MHz to 1000…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66212REM.001 2020-10-15 Appendix B: Photographs DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66212REM.001 Page 2 of 2 2020-10-15