2AGA5-F213-in-1 Wireless Charger

3-in-1 Wireless ChargerV1.0 USER MANUAL Model: F21 Specifications Package Contents Wireless Charger x 1Charging Cable x1User Manual x1 Type-C Input12V⎓2.5A,9V⎓3A,5V⎓3A Wireless Output for Phone 15W（Max） Wireless Output for Earphones3W Wireless Output for Watch2.5W Dimensions236.1x59.8x9.8mm Product Features 1. Magnetic Wireless Charger for Phone 2. Wireless Charger for Earphones 3. Watch Charger 4. Wireless Charging Indicator 5.Type-C Input Operating Instructions Connect the Type-C cable (included) between the wireless charger and the wall charger/power adapter (not included), It's recommend to use the PD27W or above wall charger/power adapter to match the fast charging. Place the devices that need to be charged in the center of each wireless charger, The corresponding indicator light will light up, which means wireless charging is in progress. P.S.: 1. Make sure your device is fit for Qi standard receiving equipment. 2. The watch charger is for Apple watch or Samsung watch. Troubleshooting 1.Use only the approved wall charger/power adapter, otherwise, may it will cause danger. 2.Do not put any foreign objects including metal, magnetic absorbers, and IC cards in the charging detective area, which may cause abnormal charging or damage the unit because of too much heat. 3.Do not try to disassemble the product as it may get damaged if you are not professional. FAQs 1. What to do when my Qi-enabled phone can’t charge wirelessly? 1) Please make sure the charging cable is connected properly. 2) Please make sure the wireless charging receiving coil of your device is placed in the center of the wireless charger area. 2. What to do when my phone can't use fast charging? Please check the charging cable is provided by us or original accessories of mobile phone. And the input is connected through fast charging wall charger/power adapter (PD27W or above). FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Rev 1/26/2023 (SHENZHEN UGOOD TECHNOLOGY CO., LIMITED) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AGA5-F21 [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, By: Junxing Qiu Rev 1/26/2023 (SHENZHEN UGOOD TECHNOLOGY CO., LIMITED) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AGA5-F21 [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, By: Junxing Qiu

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 09-28-2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AGA5-F21 SHENZHEN UGOOD TECHNOLOGY CO., LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED FRN: 0024996142 Address: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China Signature: Contact Person: Junxing Qiu Tel: +86-755-89959209 Email: [email protected]

Shenzhen Ruitong Qianye Technology Co., LTD Customer/Ciient Zhuo Xingwang Name/TYPE Wireless charging transmitter coil Product model Model NO G42.5×5×0.8 Double-slot with Front and Back Adhesive, Lead Length 25MM / Inductance 6.5UH Product number Part numbering system Customer material number Cient p/NO Engineering Number Enginrer NO ZXW19 Date: 28 September 2025 Engineering Department of the company revise content Date of accreditation Formulation review approval Marie Wan Liu Marie Wan Liu Cheng-chao Customer acknowledges receipt engineering approve Date of approval/APProved 一、 Circuits process NO winding wire gage number of turns direction of winding remarks 1 N1 2UEW-B-0.08*24*2P 10TS CCW Shenzhen Ruitong Qianye Technology Co., LTD 2 II. Electrical properties: 1. Test conditions: 25°C, 65%RH@100KHz/1V 1.1 Inductance 1.12 L0A (coil + magnetic sheet) =6.5uH±5% 1.2 Q value =40MIN 1.3 DCR (Direct Current Resistance): 80mΩ MAX 1.4 Operating temperature: -25°C~85°C 2. Test instrument: Tonghui TH2830 3. List of materials III. Circuit diagram unit: MM III. Circuit diagram unit: MM N O project material 1 WIRE ￠0.08*56p 2UEW- 2 FERRITE 42.5*5*0.8 L type double groove with porous ferrite hard magnetic front and back glue 3 GLUE Water-based white glue 4 SOLDER HQ-996/JS-996 5 Tin Senju Junichi 6 High temperature adhesive 5MM high temperature tape 7 8 Shenzhen Ruitong Qianye Technology Co., LTD IV. Schematic diagram stand ard A B C D E F G STD 42.5±0.5 39±0.5 20.5±0.3 5.2±0.2 25±2 3±1 1.5±0.2 unit ：MM Shenzhen Ruitong Qianye Technology Co., LTD 5． pack 5.3 The packaging shall be based on the existing packaging plate as the reference standard and the actual shipping packaging as the standard. If there are special requirements, it can be customized. The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. Shenzhen Ruitong Qianye Technology Co., LTD 6、Storage and use conditions 7、6.1 Storage conditions 6.1.1 Recommended storage conditions: temperature-25°C~ 85°C, humidity 70% (Max.) 6.1.2 Storage period: within six months from the date of production 6.2 Conditions of use Usage conditions: temperature = -25°C~ 85°C, humidity ≤ 90%

Shenzhen Ruitong Qianye Technology Co., LTD Customer/Ciient Zhuo Xingwang Name/TYPE Wireless charging transmitter coil Product model Model NO Model NO G42.5*5*0.8 double groove front and back adhesive line length 35MM/6.5UH Product number Part numbering system Customer material number Cient p/NO Engineering Number Enginrer NO ZXW23 Date: 28 September 2025 This position is for the Engineering Department/For Enginer Department only Modified content/Rrvised Cintent APRProved Date Formulation review approval Marie Wan Liu Marie Wan Liu Cheng-chao Customer acknowledges to re-sign/Authorixed Signaturture Company Chop Engineering/ Enginrer Accredited/QC APProved Date of approval/APProved 一、 Winding process: NO winding wire gage number of turns direction of winding remarks 1 N1 2UEW-B-0.08*24*2P 10TS CCW 2 II. Electrical Performance/FEATURES: Shenzhen Ruitong Qianye Technology Co., LTD 1. Test conditions (Test conditions): 25°C, 65%RH@100KHz/1V 1.1 Inductance (Inductance) 1.12 L0A (coil + magnetic sheet) = 6.5uH±5% 1.2 Q value =40MIN 1.3 DCR (Direct Current Resistance): 80mΩ MAX 1.4 Operating temperature (Operating Temperature): -25°C~85°C 2. Test instrument (Test instrument): Tonghui TH2830 3. List of materials III. Circuit diagram/CIRCUIT DIAGRAM Unit: MM IV. Exterior Diagram/OUTSIDE DIAGRAM N O project material 1 WIRE ￠0.08*56p 2UEW- 2 FERRITE 42.5*5*0.8 L type double groove with porous ferrite hard magnetic front and back glue 3 GLUE Water-based white glue 4 SOLDER HQ-996/JS-996 5 Tin Senju Junichi 6 High temperature adhesive 5MM high temperature tape 7 8 Shenzhen Ruitong Qianye Technology Co., LTD stand ard A B C D E F G STD 42.5±0.5 39±0.5 20.5±0.3 5.2±0.2 35±2 3±1 1.5±0.2 unit ：MM 5．Packaging/PACKAGE Shenzhen Ruitong Qianye Technology Co., LTD 5.3 The packaging shall be based on the existing packaging plate as the reference standard and the actual shipping packaging as the standard. If there are special requirements, it can be customized. The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. Shenzhen Ruitong Qianye Technology Co., LTD Six, storage and use conditions Storage and Use condition 6.1 Storage conditions Storage conditions 6.1.1 Recommended storage conditions: temperature-25°C~ 85°C, humidity 70% (Max.) Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 6.1.2 Storage period: within six months from the date of production Storage life : Within the limits of six months from being produced. 6.2 Use conditions Use condition Usage conditions: temperature = -25°C~ 85°C, humidity ≤ 90% Use condition limit: T=-25°C~85°C, RH≤ 90%.

Shenzhen Ruitong Qianye Technology Co., LTD Customer/Ciient Zhuo Xingwang Name/TYPE Apple Watch transmitting coil Product model Model NO soft magnetic coil 6.5UH reverse back glue/ Product number Part numbering system Customer material number Cient p/NO Engineering Number Enginrer NO ZXW24 Date: 28 September 2025 This position is for the Engineering Department/For Enginer Only Modified content/Rrvised Cintent APRProved Date Prepared Prepared Reviewed Approved Huang Wu Liu Xiaoxiao Ng Yuen Long Customer acknowledges to re-sign/Authorixed Signaturture Company Chop Engineering / Enginrer Accredited/QC APProved Date of approval/APProved 一、 Winding process: NO winding wire gage number of turns direction of winding remarks 1 N1 2UEW-B-0.08*24P 12TS CCW 2 Shenzhen Ruitong Qianye Technology Co., LTD II. Electrical Performance/FEATURES: 1. Test conditions (Test conditions): 25°C, 65%RH@100KHz/1V 1.1 Inductance (Inductance) 1.12 L0A (coil + magnetic sheet) = 6.5uH±5% 1.2 Q value =30MIN±5% 1.3 DCR: 110mΩ±5% 1.4 Operating temperature (Operating Temperature): -25°C~85°C 2. Test instrument (Test instrument): Tonghui TH2830/100KHZ/1VCallipers 3. List of materials Unit: MM III. Exterior Diagram/OUTSIDE DIAGRA N O project material 1 WIRE ￠0.08*24p 2UEW- 2 FERRITE 25mm outer diameter * 7.8mm hole diameter * 2.5mm thickness-tank-type rubber magnetic soft magnet 3 GLUE Water-based white glue 4 SOLDER HQ-996/JS-996 5 Tin Senju Junichi 6 7 8 Shenzhen Ruitong Qianye Technology Co., LTD Note: The magnetic sheet has double-sided adhesive backing on the back. The central hole contains a 7.8 mm outer diameter magnet with a thickness of 3 mm and a high strength of 3,400 Gauss (S-grade). stand ard A B C D E F STD 14.25±0.2 23.3±0.2 24.9±0.2 25±2 3±1 3.2±0.3 unit ：MM IV. Packaging/PACKAGE Shenzhen Ruitong Qianye Technology Co., LTD 5.3 The packaging shall be based on the existing packaging plate and the actual shipping packaging. If there are special requirements, it can be customized. The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. Shenzhen Ruitong Qianye Technology Co., LTD V. Storage and use conditions 5.1 Storage conditions Storage condition 5.1.1 Recommended storage conditions: temperature-25°C~ 85°C, humidity 70% (Max.) Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 5.1.2 Storage period: within six months from the date of production Storage life : Within the limits of six months from being produced. 5.2 Use condition Use condition Usage conditions: temperature = -25°C~ 85°C, humidity ≤ 90% Use condition limit: T=-25°C~85°C, RH≤ 90%.

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Date：September 28, 2025 Product Model Number: F21, QC210, QC210WT, QC210BK FCC ID: 2AGA5-F21 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Junxing Qiu Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +86-755-89959209 On behalf of: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 28, 2025 Subject; Request for Confidentiality FCC ID: 2AGA5-F21 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Junxing Qiu Title: CEO

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Model Difference Statement Dear Sir/Madam, FCC ID: 2AGA5-F21 Added models QC210, QC210WT, QC210BK. basis of the original product F21 The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Junxing Qiu Title: CEO Date: September 28, 2025 Company name: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China

Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report Annex A. EUT External Photos Model: F21 EUT View 1 EUT View 2 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report Annex B. EUT Internal Photos Model: F21 EUT Internal View 1 EUT Internal View 2 Watch Coil ANT1 Phone Coil ANT1 Earphone Coil ANT1 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT Internal View 5 EUT Internal View 6 Report No: SSP25090217-1E FCC ID: 2AGA5-F21 Annex of Test Report EUT Internal View 7

Report No: SSP25090217-2E FCC Test Report Page 1 of 12 RF Exposure Report FCC ID: 2AGA5-F21 Report No. : SSP25090217-2E Applicant : SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Product Name : 3-in-1 Wireless Charger Model Name : F21 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2025-09-27 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090217-2E FCC Test Report Page 2 of 12 Test Report Basic Information Applicant..................................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Applicant...............: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer..........................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Manufacturer........: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China Product Name.........................: 3-in-1 Wireless Charger Brand Name.............................: MIABOO, UGOOD Main Model..............................: F21 Series Models..........................: QC210, QC210WT, QC210BK Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2025-08-30 to 2025-09-26 Test Result...............................: PASS Tested By ................................: (Leonis Cai) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090217-2E FCC Test Report Page 3 of 12 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................6 1.4 List of Measurement Instruments ..........................................................................................................................8 1.5 Measurement Uncertainty .....................................................................................................................................8 2. RF Exposure .................................................................................................................................................................9 2.1 Standard and Limit................................................................................................................................................9 2.2 Test Procedures ....................................................................................................................................................9 2.3 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 13 Report No: SSP25090217-2E FCC Test Report Page 4 of 12 Revision History Revision Issue Date Description Revised By V1.0 2025-09-27 Initial Release Lahm Peng Report No: SSP25090217-2E FCC Test Report Page 5 of 12 1. General Information 1.1 Product Information Product Name: 3-in-1 Wireless Charger Trade Name: MIABOO, UGOOD Test Model: F21 Series Models: QC210, QC210WT, QC210BK Rated Voltage: Input USB-C: 5V⎓3A, 9V⎓3A, 12V⎓2.5A Wireless Output: 5W, 7.5W, 10W, 15W Apple Watch Wireless charging: 2.5W Earphone Wireless charging: 3W Test Sample No: SSP25090217-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC Operating Frequency: Wireless charging Output (Phone/Earphone):110.5kHz-205kHz Wireless charging Output (Watch):310kHz-340kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Report No: SSP25090217-2E FCC Test Report Page 6 of 12 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless Charging 15W (Mobile Phone) + 3W (Earphone) + 2.5W (Apple Watch) TM2 Wireless Charging 15W (Mobile Phone) TM3 Wireless Charging 10W (Mobile Phone) TM4 Wireless Charging 7.5W (Mobile Phone) TM5 Wireless Charging 5W (Mobile Phone) TM6 Wireless Charging 3W (Earphone) TM7 Wireless Charging 2.5W (Watch) TM8 Wireless Charging 15W (Mobile Phone) + 3W (Earphone) TM9 Wireless Charging 10W (Mobile Phone) + 3W (Earphone) TM10 Wireless Charging 7.5W (Mobile Phone) +3W (Earphone) TM11 Wireless Charging 5W (Mobile Phone) + 3W (Earphone) TM12 Wireless Charging 15W (Mobile Phone) + 2.5W (Appl…

Text truncated - open the document above for the full version.

Report No: SSP25090217-1E FCC Test Report Page 1 of 25 FCC TEST REPORT FCC ID: 2AGA5-F21 Report No. : SSP25090217-1E Applicant : SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Product Name : 3-in-1 Wireless Charger Model Name : F21 Test Standard : FCC Part 15 Subpart C Date of Issue : 2025-09-27 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090217-1E FCC Test Report Page 2 of 25 Test Report Basic Information Applicant..................................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Applicant...............: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer..........................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Manufacturer........: 302, Building 22, Lianchuang Technology Park, No. 21 Bulan Road, Xia li lang Community, Nanwan Street, Longgang District, Shenzhen, China Product Name.........................: 3-in-1 Wireless Charger Brand Name.............................: MIABOO, UGOOD Main Model..............................: F21 Series Models..........................: QC210, QC210WT, QC210BK Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2025-08-30 to 2025-09-26 Test Result...............................: PASS Tested By ................................: (Leonis Cai) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090217-1E FCC Test Report Page 3 of 25 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .....................................................................................................................................…

Text truncated - open the document above for the full version.