2AGA5-F5Pen Holder with Wireless Charger

Pen Holder with Wireless Charger & tĂƌŶŝŶŐ ^ƚĂƚĞŵĞŶƚ ŚĂŶŐĞƐ Žƌ ŵŽĚŝĨŝĐĂƚŝŽŶƐ ŶŽƚ ĞdžƉƌĞƐƐůLJ ĂƉƉƌŽǀĞĚ ďLJ ƚŚĞ ƉĂƌƚLJ ƌĞƐƉŽŶƐŝďůĞ ĨŽƌ ĐŽŵƉůŝĂŶĐĞ ĐŽƵůĚ ǀŽŝĚ ƚŚĞ ƵƐĞƌ͛Ɛ ĂƵƚŚŽƌŝƚLJ ƚŽ ŽƉĞƌĂƚĞ ƚŚĞ ĞƋƵŝƉŵĞŶƚ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŚĂƐ ďĞĞŶ ƚĞƐƚĞĚ ĂŶĚ ĨŽƵŶĚ ƚŽ ĐŽŵƉůLJ ǁŝƚŚ ƚŚĞ ůŝŵŝƚƐ ĨŽƌ Ă ůĂƐƐ  ĚŝŐŝƚĂů ĚĞǀŝĐĞ͕ ƉƵƌƐƵĂŶƚ ƚŽ WĂƌƚ ϭρ ŽĨ ƚŚĞ & ZƵůĞƐ͘ dŚĞƐĞ ůŝŵŝƚƐ Ăƌ Ğ ĚĞƐŝŐŶĞĚ ƚŽ ƉƌŽǀŝĚĞ ƌĞĂƐŽŶĂďůĞ ƉƌŽƚĞĐƚŝŽŶ ĂŐĂŝŶƐƚ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ŝŶ Ă ƌĞƐŝĚĞŶƚŝĂů ŝŶƐƚĂůůĂƚŝŽŶ͘ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ŐĞŶĞƌĂƚĞƐ ƵƐĞƐ ĂŶĚ ĐĂŶ ƌĂĚŝĂƚĞ ƌĂĚŝŽ ĨƌĞƋƵĞŶĐLJ ĞŶĞƌŐLJ ĂŶĚ͕ ŝĨ ŶŽƚ ŝŶƐƚĂůůĞĚ ĂŶĚ ƵƐĞĚ ŝŶ ĂĐĐŽƌĚĂŶĐĞ ǁŝƚŚ ƚŚĞ ŝŶƐƚƌƵĐƚŝŽŶƐ͕ ŵĂLJ ĐĂƵƐĞ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ƚŽ ƌĂĚŝŽ ĐŽŵŵƵŶŝĐĂƚŝŽŶƐ͘ ,ŽǁĞǀĞƌ͕ ƚŚĞƌĞ ŝƐ ŶŽ ŐƵĂƌĂŶƚĞĞ ƚŚĂƚ ŝŶƚĞƌĨĞƌĞŶĐĞ ǁŝůů ŶŽƚ ŽĐĐƵƌ ŝŶ Ă ƉĂ ƌƚŝĐƵůĂƌ ŝŶƐƚĂůůĂƚŝŽŶ͘ /Ĩ ƚŚŝƐ ĞƋƵŝƉŵĞŶƚ ĚŽĞƐ ĐĂƵƐĞ ŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ ƚŽ ƌĂĚŝŽ Žƌ ƚĞůĞǀŝƐŝŽŶ ƌĞĐĞƉƚŝŽŶ͕ ǁŚŝĐŚ ĐĂŶ ďĞ ĚĞƚĞƌŵŝŶĞĚ ďLJ ƚƵƌŶŝŶŐ ƚŚĞ ĞƋƵŝƉŵĞŶƚ ŽĨĨ ĂŶĚ ŽŶ͕ ƚŚĞ ƵƐĞƌ ŝƐ ĞŶĐŽƵƌĂŐĞĚ ƚŽ ƚƌLJ ƚŽ ĐŽƌƌĞĐƚ ƚŚĞ ŝŶƚĞƌĨĞƌĞŶĐĞ ďLJ ŽŶĞ Žƌ ŵŽƌĞ ŽĨ ƚŚĞ ĨŽůůŽǁŝŶŐ ŵĞĂƐƵƌĞƐ͗ ‐‐ ZĞŽƌŝĞŶƚ Žƌ ƌĞůŽĐĂƚĞ ƚŚĞ ƌ ĞĐĞŝǀŝŶŐ ĂŶƚĞŶŶĂ͘ ‐‐ /ŶĐƌĞĂƐĞ ƚŚĞ ƐĞƉĂƌĂƚŝŽŶ ďĞƚǁĞĞŶ ƚŚĞ ĞƋƵŝƉŵĞŶƚ ĂŶĚ ƌĞĐĞŝǀĞƌ͘ ‐‐ ŽŶŶĞĐƚ ƚŚĞ ĞƋƵŝƉŵĞŶƚ ŝŶƚŽ ĂŶ ŽƵƚůĞƚ ŽŶ Ă ĐŝƌĐƵŝƚ ĚŝĨĨĞƌĞŶƚ ĨƌŽŵ ƚŚĂƚ ƚŽ ǁŚŝĐŚ ƚŚĞ ƌĞĐĞŝǀĞƌ ŝƐ ĐŽŶŶĞĐƚĞĚ͘ ‐‐ ŽŶƐƵůƚ ƚŚĞ ĚĞĂůĞƌ Žƌ ĂŶ ĞdžƉĞƌŝĞŶĐĞĚ ƌĂĚŝŽͬds ƚĞĐŚŶŝĐŝĂŶ ĨŽƌ ŚĞůƉ͘ RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter dŚŝƐĚĞǀŝĐĞĐŽŵƉůŝĞƐǁŝƚŚƉĂƌƚϭρŽĨƚŚĞ&ZƵůĞƐ͘KƉĞƌĂƚŝŽŶŝƐƐƵďũĞĐƚƚŽƚŚĞĨŽůůŽǁŝŶŐƚǁŽĐŽŶĚŝƚŝŽŶƐ͗ ;ϭͿdŚŝƐĚĞǀŝĐĞŵĂLJŶŽƚĐĂƵƐĞŚĂƌŵĨƵů ŝŶƚĞƌĨĞƌĞŶĐĞ͕ĂŶĚ;ϮͿƚŚŝƐĚĞǀŝĐĞŵƵƐƚĂĐĐĞƉƚĂŶLJŝŶƚĞƌĨĞƌĞŶĐĞƌĞĐĞŝ ǀĞĚ͕ŝŶĐůƵĚŝŶŐŝŶƚĞƌĨĞƌĞŶĐĞƚŚĂƚŵĂLJĐĂƵƐĞƵŶĚĞƐŝƌĞĚŽƉĞƌĂƚŝŽŶ͘

SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Agent Authorization Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address: 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Product Name: Pen Holder with Wireless Charger Model Number(s ): F5(QC-905WT), F5(QC-905BK) Product Description: Pen Holder with Wireless Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Feb. 01, 2021 Name: Junxing Qiu Title: CEO Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED

Letter of Declaration Company: SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address: 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Product Name: Pen Holder with Wireless Charger Model Number: F5(QC-905WT), F5(QC-905BK) FCC Identifier: 2AGA5-F5 Compliant with KDB680106 D01 RF Exposure Wireless Charging Apps v03 section 5,b： (1) Power transfer frequency is less than 1 MHz. -The device operate in the frequency range 125KHz. (2) Output power from each primary coil is less than or equal to 15 watts. -The maximum output power of the primary coil is 5W (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. -The transfer system including a charging system with only single primary coils is to detect and allow only (4) Client device is placed directly in contact with the transmitter. -The EUT is placed directly in contact with the transmitter (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). -The EUT is a mobile exposure conditions only. (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. - The EUT meet the conditions. Name: Junxing Qiu Date: Feb. 01, 2021 Title: CEO Signature of applicant:

< SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Date: Feb. 01, 2021 Subject; Request for Long Term Confidentiality FCC ID: 2AGA5-F5 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Name: Junxing Qiu Date: Feb. 01, 2021 Title: CEO Signature of applicant:

Model Difference Declaration To Whom It May Concern, We, SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED(Pen Holder with Wireless Charger) Trademark:MIABOO; Model Number: F5(QC-905WT), F5(QC-905BK); All model’s the function, software and electric circuit are the same, only with a product model named and color different. Test sample model: F5(QC-905WT). Please contact me if you have any question. Name: Junxing Qiu Date: Feb. 01, 2021 Title: CEO Signature of applicant:

Annex A External Photos Report No.: HK2101250336-1E/2E Page 1 of 4 Report No.: HK2101250336-1E/2E Page 2 of 4 Report No.: HK2101250336-1E/2E Page 3 of 4 Report No.: HK2101250336-1E/2E Page 4 of 4 Serial No.

FCC ID LABEL: Ca. 5mm x 10mm Include in manual: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location FCC ID: 2AGA5-F5

Annex B Internal Photos Report No.: HK2101250336-1E/2E Page 1 of 5 Report No.: HK2101250336-1E/2E Page 2 of 5 Antenna Report No.: HK2101250336-1E/2E Page 3 of 5 Report No.: HK2101250336-1E/2E Page 4 of 5 Report No.: HK2101250336-1E/2E Page 5 of 5

Page 1 of 8 Report No.: HK2101250336-2E FCC TEST REPORT Test report On Behalf of SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED For Pen Holder with Wireless Charger Model No.: F5(QC-905WT), F5(QC-905BK) FCC ID: 2AGA5-F5 Prepared for : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Jan. 21, 2021 ~Jan. 28, 2021 Date of Report: Jan. 28, 2021 Report Number: HK2101250336-2E Page 2 of 8 Report No.: HK2101250336-2E Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Channel Frequency (KHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 125 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 2. SUMMARY OF TEST RESULTS 2.1 Test procedures according to the technical standards: FCC KDB680106 D01 RF Exposure Wireless Charging Apps v03 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v03 (3)(3) Electric Field Strength (E ) (V /m) PASS Magnetic Field Strength (H ) (A/m) PASS 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 All emissions,radiated(<30M)(9KHz-30MHz) ±4.26dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 3 of 8 Report No.: HK2101250336-2E 2.3 Test Instruments Description Brand Model No. Frequency Range Calibrated Date Calibrated Until Broadband Field Meter NARDA NBM-550 - Jun. 18, 2020 Jun. 17, 2021 Magnetic Field Meter NARDA ELT-400 1 – 400kHz Jun. 18, 2020 Jun. 17, 2021 Magnetic Probe NARDA HF-3061 300kHz – 30MHz Jun. 18, 2020 Jun. 17, 2021 Magnetic Probe NARDA HF-0191 27 – 1000MHz Jun. 18, 2020 Jun. 17, 2021 Broadband Field Meter NARDA NBM-550 - Jun. 18, 2020 Jun. 17, 2021 Electric Field Meter COMBINOVA EFM 200 5Hz – 400kHz Jun. 18, 2020 Jun. 17, 2021 E-Field Probe NARDA EF-0391 100kHz – 3GHz Jun. 18, 2020 Jun. 17, 2021 E-Field Probe NARDA EF-6091 100MHz – 60GHz Jun. 18, 2020 Jun. 17, 2021 lsotropic Electric Field| Probe NARDA EP-601 511WX60706 Jun. 18, 2020 Jun. 17, 2021 NOTE: 1. The calibration interval of the above test instruments is 12 months . Page 4 of 8 Report No.: HK2101250336-2E 3. MAXIMUM PERMISSIBLE EXPOSURE 3.1 MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density Note 2: For the applic able limit, see FCC 1.1310, 680106 D01 RF Exposure Wirel ess Charging Apps v03 Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Tabl e 1 of Section 1.1310: 614 V/m and 1.63A/m. A KDB inquiry is required to determine the applicable exposure limits belo w 100 kHz. Page 5 of 8 Report No.: HK2101250336-2E 4. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of (H-field & E- field strengths for all sides is 15cm, H-field strengths of top side is 20cm). E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. 4.1 TEST SETUP 4.2 RESULT OF MAXIMUM PERMISSIBLE EXPOSURE Page 6 of 8 Report No.: HK2101250336-2E For Full load mode: E-Field Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (V/m) 0.125 1.52 1.46 1.40 1.38 1.37 614 H-Field Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (A/m) 0.125 0.26 0.20 0.42 0.19 0.24 1.63 For Half Load mode: E-Field Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (V/m) 0.125 1.48 1.39 1.52 1.41 1.53 614 H-Field Strength at 15 cm fro m the edges surrounding the EUT (A /m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (A/m) 0.125 0.20 0.22 0.41 0.17 0.25 1.63 Page 7 of 8 Report No.: HK2101250336-2E For No load mode: E-Field Strength at 15 cm fro m the edges surrounding the EUT (V /m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (V/m) 0.125 1.39 1.47 1.53 1.33 1.51 614 H-Field Strength at 15 cm fro m the edges surrounding the EUT (A /m) Frequency Range (MHz) Te s t Position A Te s t Position B Te s t Position C Te s t Position D Te s t Position E Limits Te s t (A/m) 0.125 0.16 0.27 0.21 0.22 0.19 1.63 Remark…

Text truncated - open the document above for the full version.

Page 1 of 20 Report No.: HK2101250336-1E FCC TEST REPORT Test report On Behalf of SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED For Pen Holder with Wireless Charger Model No.: F5(QC-905WT), F5(QC-905BK) FCC ID: 2AGA5-F5 Prepared for : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd, Nanwan St., Longgang District, Shenzhen, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Jan. 21, 2021 ~Jan. 28, 2021 Date of Report: Jan. 28, 2021 Report Number: HK2101250336-1E Page 2 of 20 Report No.: HK2101250336-1E TEST RESULT CERTIFICATION Applicant’s name ................. : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address ................................. : 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd,Nanwan St., Longgang District, Shenzhen, China Manufacture's Name ............ : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address ................................. : 4/F, Building 25, Phase II, Lianchuang Technology Park, Bulan Rd,Nanwan St., Longgang District, Shenzhen, China Product description Trade Mark: MIABOO Product name ........................... : Pen Holder with Wireless Charger Model and/or type reference : F5(QC-905WT), F5(QC-905BK) Standards ............................. : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Jan. 21, 2021 ~Jan. 28, 2021 Date of Issue ........................................... : Jan. 28, 2021 Test Result ............................................... : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 20 Report No.: HK2101250336-1E Table of Contents Page 1 . Test Summary 5 1.1 . Test Procedures And Results 5 1.2 . Test Facility 5 1.3 . Measurement Uncertainty 5 2. General Information 6 2.1. General Description of EUT 6 2.2. Carrier Frequency of Channels 7 2.3. Operation of EUT during testing 7 2.4. Description of Test Setup 7 2.5. Measurement Instruments List 8 3. Conducted Emission Test 9 3.1. Block Diagram of Test Setup 9 3.2. Conducted Power Line Emission Limit 9 3.3. Test Procedure 9 3.4. Test Result 10 4. Radia Ted Emissions 12 4.1. Block Diagram of Test Setup 12 4.2. Rules and specifications 13 4.3. Test Procedure 14 4.4. Test Result 14 5. Antenna Requirement 17 6. Photograph Of Test 18 7. Photos Of The EUT 20 Page 4 of 20 Report No.: HK2101250336-1E ** Modifited History ** Revison Description Issued Data Remark Revsion 1.0 Initial Test Report Release Jan. 28, 2021 Jason Zhou Page 5 of 20 Report No.: HK2101250336-1E 1. Test Summary 1.1. Test Procedures And Results DESCRIPTION OF TEST SECTION NUMBER RESULT CONDUCTED EMISSIONS TEST 15.207 COMPLIANT RADIATED EMISSION TEST 15.209 COMPLIANT OCCUPIED BANDWIDTH MEASUREMENT 15.215 N/A ANTENNA REQUIREMENT 15.203 COMPLIANT Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2. Test Facility Test Firm : Shenzhen HUAK Testing Technology Co., Ltd. Address 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China 1.3. Measurement Uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty = 2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 4.26dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 20 Report No.: HK2101250336-1E 2. General Information 2.1. General Description of EUT Equipment Pen Holder with Wireless Charger Model Name F5(QC-905WT) Serial No. F5(QC-905BK) Model Difference All model’s the function, software and electric circuit are the same, only with a product model named and color different. Test sample model: F5(QC-905WT). Trade Mark MIABOO FCC ID 2AGA5-F5 Antenna Type Coil Antenna Antenna Gain 0dBi Operation frequency 125KHz Number of Channels 1 Modulation Type ASK Power Source Input: 5V/2A USB Output: 5V/2A(Max) Wireless Output: 5W Power Rating Input: 5V/2A USB Output: 5V/2A(Max) Wireless Output: 5W Page 7 of 20 Report No.: HK2101250336-1E 2.2. Carrier Frequency of Channels Operation Frequency each of channel Channel Frequency 1 125KHz 2.3. Operation of EUT during testing Operating Mode The mode is used: Transmitting mode 2.4. Description of Test Setup Operation of EUT during testing: AC Plug Adapter information Model: HW-059200CHQ Input: 100-240V, 50-60Hz, 0.5A Output: 5VDC, 2A Mobile phone information Model: Samsung S6 The sample was placed (0.8m（30MHz~1GHz）, 0.8m (9KHz~30MHz) ) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. The worst case is X position. Adapter EUT Mobile phone resistance 5V Page 8 of 20 Report No.: HK2101250336-1E 2.5. Measurement …

Text truncated - open the document above for the full version.

F5(QC-905WT) Radiated Emission Conducted Emission