2AGA5-F22Camera Grip Power Bank

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2026/01/28 U.S. Agent Designation SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AGA5-F22): Name and company of U.S. agent: GLOCERTS TECHNOLOGY INC Physical U.S. address of agent: 19784 SUNKISSED RIDGE DR RIVERSIDE, CA 92507 United States FRN of U.S. agent: 0036339737 Email address of U.S. agent: [email protected] GLOCERTS TECHNOLOGY INC acknowledges their obligation to accept service of process on behalf of SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED with the FRN [0024996142] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. An expiration date for this letter does not exist. Sincerely, Signature Junxing Qiu CEO SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Signature Huiying Fan Director GLOCERTS TECHNOLOGY INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

FCC ID:2AGA5-F22 External Photos of the EUT FCC ID:2AGA5-F22 FCC ID:2AGA5-F22

Label and Location Size: L: 0.5cm*W: 0.2cm Label and Location FCC ID : 2AGA5-F22

FCC ID:2AGA5-F22 Internal Photos of the EUT FCC ID:2AGA5-F22 ANT FCC ID:2AGA5-F22

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC RF Exposure Report Reference No. ..................... : FCC ID............................................. : CTA26012000502 2AGA5-F22 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jan. 26, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address ............................................ : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Test specification ........................... : FCC CFR 47 PART 1, § 1.1310 Standard ........................................... : KDB 680106 D01 Wireless Power Transfer v04 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Camera Grip Power Bank Trade Mark ....................................... : MIABOO, UGOOD Manufacturer .................................... : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Model/Type reference ...................... : F22 Modulation Type ............................... : F22W, F22L, F22WL Operation Frequency ........................ : From 110KHz~205KHz Rating ............................................... : Type-C Input: 5V 2A Type-C output: 5V 2A Wireless output: 5W Battery: 3.6V 4500mAh 16.2Wh Result ............................................... : PASS Report No.: CTA26012000502 Page 2 of 13 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Camera Grip Power Bank Model /Type : F22 Listed Models : F22W, F22L, F22WL Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number and colour is different for these model. Applicant : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26012000502 Page 3 of 13 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................... 4 2 S U M M A R Y .............................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 6 2.5 Modifications 6 3 T E S T E N V I R O N M E N T 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Statement of the measurement uncertainty 7 3.4 Equipments Used during the Test 8 4 T E S T L I M I T 8 4.1 Requirement 8 4.2 Test setup 9 4.3 Test Procedures 10 4.4 Equipment Approval Considerations of KDB 680106 D01v04 10 4.5 Test results 11 4.6 Conclusion 12 5 P H O T O G R A P H S O F T H E T E S T S E T U P ......................... 13 Report No.: CTA26012000502 Page 4 of 13 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: 680106 D01 Wireless Power Transfer v04: EQUIPMENT AUTHORIZATION OF WIRELESS POWER TRANSFER DEVICES. Report No.: CTA26012000502 Page 5 of 13 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Jan. 20, 2026 Testing commenced on : Jan. 20, 2026 Testing concluded on : Jan. 26, 2026 2.2 Product Description Product Name: Camera Grip Power Bank Model/Type reference: F22 Hardware version: V1.0 Software version: V1.0 Test samples ID: CTA260120024-1# (Engineer sample) CTA260120024-2# (Normal sample) Power supply: Type-C Input: 5V 2A Type-C output: 5V 2A Wireless output: 5W Battery: 3.6V 4500mAh 16.2Wh Operation frequency: 110KHz - 205KHz Mod…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type Loop coil antenna Model F22 Frequency range 110KHz - 205KHz Manufacturer SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China ANT Peak Gain 0dBi 2. Antenna Photo: We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT Report Reference No. ..................... : FCC ID............................................. : CTA26012000501 2AGA5-F22 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jan. 26, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address............................................ : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a- 2024 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Camera Grip Power Bank Trade Mark ....................................... : MIABOO, UGOOD Manufacturer .................................... : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Model/Type reference ...................... : F22 Listed Models .................................. : F22W, F22L, F22WL Modulation Type ............................... : ASK Operation Frequency ........................ : From 110KHz~205KHz Ratings ............................................. : Type-C Input: 5V 2A Type-C output: 5V 2A Wireless output: 5W Battery: 3.6V 4500mAh 16.2Wh Result ............................................... : PASS Report No.: CTA26012000501 Page 2 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Camera Grip Power Bank Model /Type : F22 Listed Models : F22W, F22L, F22WL Model difference : The PCB board, circuit, structure and internal of these models are the same, Only model number and colour is different for these model. Applicant : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer : SHENZHEN UGOOD TECHNOLOGY CO.,LIMITED Address : Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26012000501 Page 3 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 5 2.5 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 The 20dB bandwidth 18 4.4 Antenna Requirement 19 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 20 6 PH O T O S O F T H E E U T ............................................................. 21 Report No.: CTA26012000501 Page 4 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15 Subpart C (Section 15.207): Conducted limits. FCC Rules and Regulations Part 15 Subpart C (Section 15.209): Radiated emission limits; general requirements. ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024: American National Standard for Testing Unlicensed Wireless Devices Report No.: CTA26012000501 Page 5 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Q…

Text truncated - open the document above for the full version.

FCC ID:2AGA5-F22 Test Setup Photos of the EUT