2AGA5-P308Power Bank

MagneticWirelessPowerBankV1.2 USERMANUAL Specifications PackageContents PowerBankx1ChargingCablex1UserManualx1 BatteryCapacity5000mAh18.5Wh Type-CInput12V⎓1.5A,9V⎓2A,5V⎓3A Type-COutput12V⎓1.67A,9V⎓2.22A,5V⎓3A WirelessOutput15W/10W/7.5W/5W Dimensions104x66x16mm ProductFeatures 1.PowerButton 2.WirelessChargingIndicator 3.4-LevelPowerIndicators 4.WirelessCharger&MagneticAdsorptionRing 5.Type-CInput&Output OperatingInstructions 1.ChargingthePowerBank 1).ConnecttheType-Ccable(included)betweenpowerbank andthewallchargerorpoweradapter(notincluded),Itwillstart chargingautomatically.It'srecommendtousethePD18Wwall chargerorpoweradaptertomatchthefastcharging. 2).Fullychargethepowerbankbeforeusingthepowerbankfor thefirsttime.Rechargethepowerbankonceeverythree monthswhennotinuseorseldomused. 3).Duringchargingthepowerbank,thepowerIndicatorswill flash.EachLEDlightindicatesabout25%oftheavailable batterycapacity.Whenfullycharged,allpowerIndicatorswillbe onandthengoout. 2.Chargingthedevice 1).Wiredcharging Pressthepowerbutton,thepowerindicatorsareon.Connect thechargingcablebetweenType-Cportofthepowerbankand yourdevicetostartcharging. Duringchargingthedevice,thepowerindicatorsareon. 2).Wirelesscharging Placethedeviceinthecenterofthewirelesschargingarea.If yourdevicesupportsMagSafetechnology,Thepowerbankwill automaticallyholditthankstostrongmagnets. Pressthepowerbutton,thewirelesschargingindicatorison, whichmeanswirelesschargingisinprogress. P.S.,MakesureyourdeviceisfitforQistandardreceiving equipment. Troubleshooting 1.Pressthepowerbutton,ifthefirstpowerindicatorisflashing, Itmeansthebatteryisrunningoutsoon,pleaserecharge. 2.Thispowerbankcanautomaticallyidentifyequipmentthat needtocharge,Ifnodeviceisbeingcharged,thepowerbank willbeturnedoffafter30seconds. 3.Forwirelesscharging,yourdevicemustbeequippedwitha Qiwirelessreceiver.Thedevicecanautomaticallyidentifya Qi-compatibledeviceplacedonit. 4.Ifwiredchargingisnotworkingproperly,pleasetryadifferent chargingcable,sincetheconnectormaybecomeloosedueto wearing. 5.Duringcharging,thedevicemaybecomewarmduetohigh currentsandresistance,especiallyduringwirelesscharging.To reducetemperature,avoidrunningintensiveapplicationsor usingGPSonyourmobiledevicewhencharging. Cautions 1.Thepowerbankwillgenerateheatwhencharging.Always chargeinawell-ventilatedandopen-airarea. 2.Donotchargeunderpillows,blankets,clothingoron flammablesurfaces.Keepthepowerbankawayfromheat sources,directsunlight,combustiblegas,humidity,wateror otherliquids. 3.Donotdisassemble,open,microwave,incinerate,paintor insertforeignobjectsintothepowerbank. 4.Donotsubjectthepowerbanktomechanicalshocksuchas crushing,bending,puncturingorshredding.Avoiddroppingor placingheavyobjectsonthepowerbank. 5.Donotshort-circuitthepowerbankorstoreitinareceptacle whereitmaybeshort-circuitedbyothermetallicorconductive objects. 6.Donotoperatethepowerbankifithasbeenwetordamaged, topreventagainstelectricshock,explosionand/orinjury. 7.Keepthepowerbankdrytoavoidshortcircuitsorother damagetoelectronicalcomponents. 8.Keepthepowerbankawayfromhighheatandflammable liquidsandgasses.Avoidusinginenvironmenttemperature above45°Corbelow0°C. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rev 1/26/2023 (SHENZHEN UGOOD TECHNOLOGY CO., LIMITED) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 28, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AGA5-P308 [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, By: Junxing Qiu Rev 1/26/2023 (SHENZHEN UGOOD TECHNOLOGY CO., LIMITED) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 28, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AGA5-P308 [SHENZHEN UGOOD TECHNOLOGY CO., LIMITED] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, By: Junxing Qiu

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: April 28, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AGA5-P308 SHENZHEN UGOOD TECHNOLOGY CO., LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED FRN: 0024996142 Address: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Signature: Contact Person: Junxing Qiu Tel: +86-755-89959209 Email: [email protected]

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Date: April 28, 2026 Product Model Number: P308, lmagpb, Kingston 2.0, PBW308, PW308, iS Powerbank FCC ID: 2AGA5-P308 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Junxing Qiu Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +86-755-89959209 On behalf of: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 28, 2026 Subject; Request for Confidentiality FCC ID: 2AGA5-P308 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Junxing Qiu Title: CEO

SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Model Difference Statement Dear Sir/Madam, FCC ID: 2AGA5-P308 Added models lmagpb, Kingston 2.0, PBW308, PW308, iS Powerbank. basis of the original product P308 The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Junxing Qiu Title: CEO Date: September 28, 2025 Company name: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China

Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Annex A. EUT External Photos Model: P308 EUT View 1 EUT View 2 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 EUT View 3 EUT View 4 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 EUT View 5 EUT View 6 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 EUT View 7

Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Annex D. Label FCC Label Sample FCC Labe Size: 3cm x 2cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label

Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Annex B. EUT Internal Photos EUT View 1 EUT View 2 Coil ANT Report No: DSP26031098-1E FCC ID: 2AGA5-P308 EUT View 3 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 EUT View 4

Report No: DSP26031098-2H MPE Test Report Page 1 of 14 MPE Test Report FCC ID: 2AGA5-P308 Report No. : DSP26031098-2H Applicant : SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Product Name : Power Bank Model Name : P308 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-04-09 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26031098-2H MPE Test Report Page 2 of 14 Test Report Basic Information Applicant..................................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Applicant...............: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer..........................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Manufacturer........: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Product Name.........................: Power Bank Brand Name.............................: - Main Model..............................: P308 Series Models..........................: lmagpb, Kingston 2.0, PBW308, PW308, iS Powerbank Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-03-24 to 2026-04-01 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26031098-2H MPE Test Report Page 3 of 14 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: DSP26031098-2H MPE Test Report Page 4 of 14 Revision History Revision Issue Date Description Revised By V1.0 2026-04-09 Initial Release Lahm Peng Report No: DSP26031098-2H MPE Test Report Page 5 of 14 1. General Information 1.1 Product Information Product Name: Power Bank Trade Name: - Test Model: P308 Series Models: lmagpb, Kingston 2.0, PBW308, PW308, iS Powerbank Rated Voltage: Type-C Input: 12V⎓ 1.5A, 9V⎓ 2A, 5V⎓ 3A Type-C Output: 12V⎓ 1.67A, 9V⎓ 2.22A, 5V⎓ 3A Wireless Output: 15W / 10W / 7.5W / 5W Battery: 18.5Wh (5000mAh, 3.7V) Test Sample No: DSP26031098-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output(Phone):110.5kHz-205kHz, Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: DSP26031098-2H MPE Test Report Page 6 of 14 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W - TM2 Wireless charging 7.5W - TM3 Wireless charging 10W - TM4 Wireless charging 15W - TM5 Wireless charging 5W+Charging - Note: All modes of the main model and accessory models mentioned above have been tested. The report only shows the worst modes of the main model: TM4 data. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite USB 100cm Unshielded Without Ferrite - - - - List and D…

Text truncated - open the document above for the full version.

Shenzhen Ruitong Qianye Technology Co., Ltd. Shenzhen Ruitong Qianyi Technology Co., Ltd. Guangdong Province, Shenzhen City, Miantian Sub-district, Xinzhuang Community, Daowei Industrial Zone, Building K, 3rd Floor Customer/Ciient is prosperous Name/TYPE Wireless charging transmitter coil Product model Model NO G43.5*5.3*0.6 double-slot anti-SMJ21 adhesive backing wire length 40MM/6.5UH identification of product Pa rt nunbering systey Customer Part No. Cient p/NO Engineer NO ZXW02 Date March 24, 2026 本公司工程部/For Enginer Departner Only 修改内容/Rrvised Cintent 认可日期/APProved Date 编制/Prepared 审核/Checked 认可/Approved Wan Jimei Wan Jimei Liu Chengzhao 客户认可回签/Authorixed Signaturure Company Chop Engineering / Enginrer 认可/QC APProved Date of Approval/APProved 一、 线圈工艺/Winding Procese: NO winding Wire gauge Circle number winding direction Note: 1 N1 2UEW-B-0.08*24*2P 10TS CCW 2 e twoFEATURES:: 1.测试条件（Test conditions）：25°C,65%RH@100KHz/1V 1.1 电感量（Inductance） 1.12 L0A (coil + disk) = 6.5uH±5% 1.2 Q value = 38 MIN 1.3 DC Resistance (DCR): 85mΩ MAX 1.4 工作温度(Operating Temperature)：-25°C~85°C 2.测试仪器(Test instrument):同惠TH2830 3. List of materials three. CIRCUIT DIAGRAM Unit: MM 四．外形图/OUTSIDE DIAGRA N O project Materials 1 WIRE ￠0.08*56p 2UEW- 2 FERRITE 43.5*5.3*0.6 L-type double groove porous ferrite hard magnet 3 GLUE Water-based white glue 4 SOLDER HQ-996/JS-996 5 Tin Thousand Islands Pure Tin 6 High temperature adhesive 5MM high temperature tape 7 8 e Stan dard A B C D E F G STD 43.5± 0.5 39±0.5 20.5±0.3 5.2±0.2 40±2 3±1 1.5±0.2 Unit: MM

Report No: DSP26031098-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2AGA5-P308 Report No. : DSP26031098-1E Applicant : SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Product Name : Power Bank Model Name : P308 Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-04-09 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26031098-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Applicant...............: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Manufacturer..........................: SHENZHEN UGOOD TECHNOLOGY CO., LIMITED Address of Manufacturer........: Room 202, Building 1, Ganghong Industrial Park, No. 5 Lilang Road, Xialilang Community, Nanwan Street, Longgang District, Shenzhen, China Product Name.........................: Power Bank Brand Name.............................: - Main Model..............................: P308 Series Models..........................: lmagpb, Kingston 2.0, PBW308, PW308, iS Powerbank Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-24 to 2026-04-01 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26031098-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results ......................................................…

Text truncated - open the document above for the full version.

Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: DSP26031098-1E FCC ID: 2AGA5-P308 Radiated Emission Test View 4