2AH7L-HTAGV2Wireless sensor for early detection of overheating cables

PowerLogic HeatTag WirelessSensorfor EarlyDetectionof OverheatingCables User Guide PowerLogicoffers powerquality, uptimeand efficiency. DOCA0171EN-00 01/2021 www.se.com Legal Information The SchneiderElectricbrandand any trademarksof SchneiderElectricSE and its subsidiariesreferredto in this guideare the propertyof SchneiderElectricSE or its subsidiaries.All otherbrandsmay be trademarksof their respectiveowners. This guideand its contentare protectedunderapplicablecopyrightlaws and furnishedfor informationaluse only. No part of this guidemay be reproducedor transmittedin any form or by any means(electronic,mechanical,photocopying, recording,or otherwise),for any purpose,withoutthe prior writtenpermissionof SchneiderElectric. SchneiderElectricdoesnot grantany right or licensefor commercialuse of the guide or its content,exceptfor a non-exclusiveand personallicenseto consultit on an "as is" basis.SchneiderElectricproductsand equipmentshouldbe installed,operated, serviced,and maintainedonly by qualifiedpersonnel. As standards,specifications,and designschangefrom time to time,information containedin this guidemay be subjectto changewithoutnotice. To the extentpermittedby applicablelaw, no responsibilityor liabilityis assumedby SchneiderElectricand its subsidiariesfor any errorsor omissionsin the informational contentof this materialor consequencesarisingout of or resultingfrom the use of the informationcontainedherein. HeatTag WirelessSensorfor EarlyDetectionof Overheating Cables Table of Contents SafetyInformation.......................................................................................5 Aboutthe Book............................................................................................6 Presentation.................................................................................................7 PowerLogicMasterRange..........................................................................7 HeatTag Description...................................................................................8 HardwareDescription...............................................................................10 TechnicalCharacteristics..........................................................................12 SchneiderElectricGreenPremium™Ecolabel...........................................14 Use..............................................................................................................16 Commissioning........................................................................................16 ManualPairingof the HeatTag Sensorto a PanelServeror Gateway...........16 Unpairingthe HeatTag Sensor...................................................................16 Acknowledgingan Alert.............................................................................17 Resettingthe HeatTag Sensorto FactorySettings.......................................17 Test With the HeatTag Tester.....................................................................18 RemoteUse of Data.................................................................................22 Troubleshooting.......................................................................................23 Appendices................................................................................................24 HeatTag TesterLiquid- SafetyDataSheet..................................................25 DOCA0171EN-003 SafetyInformation HeatTag WirelessSensorfor EarlyDetectionof Overheating Cables SafetyInformation ImportantInformation Read these instructionscarefullyand look at the equipmentto become familiarwith the devicebeforetryingto install,operate,service,or maintain it. The followingspecialmessagesmay appearthroughoutthis documentationor on the equipmentto warn of potentialhazardsor to call attentionto informationthat clarifiesor simplifiesa procedure. The additionof this symbolto a “Danger”or “Warning”safety messageindicatesthat an electricalhazardexistswhichwill resultin deathor seriousinjuryif the instructionsare not followed. This is the safetyalert symbol.It is usedto alert you to potential personalinjuryhazards.Obeyall safetymessageswith this symbol to avoidpossibleinjuryor death. DANGER DANGERindicatesa hazardoussituationwhich,if not avoided,will resultin deathor seriousinjury. Failureto followthese instructionswill resultin deathor seriousinjury. WARNING WARNINGindicatesa hazardoussituationwhich,if not avoided,couldresult indeathor seriousinjury. Failureto followthese instructionscan resultin death,seriousinjury, or equipmentdamage. CAUTION CAUTIONindicatesa hazardoussituationwhich,if not avoided,couldresultin minoror moderateinjury. Failureto followthese instructionscan resultin injuryor equipment damage. NOTICE NOTICEis usedto addresspracticesnot relatedto physicalinjury. The safety alert symbolshall not be usedwith this signalword. Failureto followthese instructionscan resultin equipmentdamage. PleaseNote Electricalequipmentshouldbe installed,operated,serviced,and maintainedonly by qualifiedpersonnel.No responsibilityis assumedby SchneiderElectricfor any consequencesarisingout of the use of this material. A qualifiedpersonis one who has skillsand knowledgerelatedto the construction, installation,and operationof electricalequipmentand its installationand has receivedsafetytrainingto recognizeand avoidthe hazardsinvolved. DOCA0171EN-005 HeatTag WirelessSensorfor EarlyDetectionof Overheating CablesAboutthe Book Aboutthe Book DocumentScope This documentprovidesuserswith the technicalinformationneededto operate PowerLogic™HeatTag™wirelesssensorsfor earlydetectionof overheating cables. ValidityNote This documentappliesto HeatTag sensorswith firmwareversion002.002.005or greater. OnlineInformation The informationcontainedin this guideis likelyto be updatedat any time. SchneiderElectricstronglyrecommendsthat you havethe mostrecentand up-to- date versionavailableon www.se.com/ww/en/download. The technicalcharacteristicsof the devic…

Text truncated - open the document above for the full version.

DOCA0171EN DOCA0171FR DOCA0171ES DOCA0171ZH zh es fr en PowerLogic TM - HeatTag SMT10020 MFR5173801-02 10/2020 1/12 www.se.com/support Guarde la hoja de instrucciones para utilizarla en el futuro. Visite nuestra página web en www.se.com para descargar los documentos enumerados anteriormente (manuales de usuario ) así. TENGA EN CUENTA p La instalación, utilización, puesta en servicio y mantenimiento de equipos eléctricos deberán ser realizados sólo por personal cualificado. p El HeatTag se debe instalar dentro de una caja o panel eléctrico, tras una puerta o una placa para que no puedan acceder a él personas no autorizadas. p Al instalar y utilizar este producto es necesario tener en cuenta todas las regulaciones sobre seguridad correspondientes, ya sean regionales, locales o estatales. p Schneider Electric no se hace responsable de ninguna de las consecuencias del uso de este material. Bewahren Sie diese Anleitung bitte als Referenz zur späteren Verwendung auf. Besuchen Sie unsere Internetseite www.se.com, um die oben genannten Dokumente (Benutzerhandbücher ) sowie andere Dokumente herunterzuladen. BITTE BEACHTEN p Elektrische Geräte dürfen nur von Fachpersonal installiert, betrieben, bedient und gewartet werden. p Der HeatTag muss in elektrischen Verteilungen oder Anlagen immer Verteilungen oder Anlagen immer hinter einer Tür oder Frontplatte installiert werden, um den Zugriff und das Berühren durch nicht qualifizierte Personen zu verhindern. p Bei der Montage und Verwendung dieses Produkts sind alle zutreffenden staatlichen, landesspezifischen, regionalen und lokalen Sicherheitsbestimmungen zu beachten. p Schneider Electric haftet nicht für Schäden, die durch die Verwendung dieses Materials entstehen. Retain instruction sheet for future use. Visit our website at www.se.com to download the documents listed above (user guides ) and other documents. PLEASE NOTE p Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. p The HeatTag devices must be installed inside electrical panels or switchboards, behind a door or plate, so that they are inaccessible to unauthorised persons. p All pertinent state, regional, and local safety regulations must be observed when installing and using this product. p No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. Guarde a folha de instruções para utilização futura. Visite o nosso site em www.se.com para transferir os documentos listados acima (manuais do utilizador ) e outros documentos. NOTA p A instalação, utilização e manutenção do equipamento eléctrico devem ser efectuadas exclusivamente por pessoal qualificado. p Os HeatTag devem ser instalados no interior de quadros elétricos com porta, de forma a impedir o acesso a pessoas não autorizadas. pTodas as regulamentações de segurança pertinentes, sejam estatais, regionais ou locais, devem ser cumpridas na instalação e utilização deste produto. p A Schneider Electric não assume qualquer responsabilidade pelas consequências resultantes da utilização deste material. Сохраните эту инструкцию для использования в будущем. Посетите наш сайт www.se.com, чтобы: чтобы загрузить перечисленные выше документы (руководства пользователей ) и другие документы. ОБРАТИТЕ ВНИМАНИЕ p Установка, эксплуатация, ремонт и обслуживание электрического оборудования может выполняться только квалифицированными электриками. p Приборы HeatTag должны быть установлены внутри распределительных щитов, за дверью или пластроном, чтобы ограничить к ним свободный доступ неквалифицированного персонала. p Во время установки и использования данного изделия следует соблюдать все действующие государственные, региональные и местные нормы и правила безопасности. p Компания Schneider Electric не несет никакой ответственности за любые возможные последствия использования данной документации. Conservare le istruzioni per uso futuro. Visitate il nostro sito web www.se.com per scaricare i documenti elencati sopra (guide utente ) e altri documenti. NOTA p Manutenzione, riparazione, installazione e uso delle apparecchiature elettriche si devono affidare solo a personale qualificato. p Il HeatTag deve essere installato in quadri elettrici dove deve essere protetto da uno sportello o una piastra, affinché non vi possa accedere personale non autorizzato. p Durante l'installazione e l'uso di questo prodotto è necessario rispettare tutte le normative locali, nazionali o internazionali in materia di sicurezza. p Schneider Electric non si assume alcuna responsabilità per qualsiasi conseguenza derivante dall’uso di questo materiale. Instruction de service à conserver pour usage ultérieur. Visitez notre site web www.se.com pour télécharger les documents listés ci-dessus (guide utilisateurs ) et d'autre documents. REMARQUE IMPORTANTE p L’installation, l’utilisation, la réparation et la maintenance des équipements électriques doivent être assurées par du personnel qualifié uniquement. p Les appareils HeatTag doivent être installés à l’intérieur de tableaux ou coffrets électriques, derrière une porte ou un plastron, de telle sorte qu’ils ne soient pas accessibles par une personne non-autorisée. p Toutes les réglementations locales, régionales et nationales pertinentes doivent être respectées lors de l'installation et de l'utilisation de ce produit. p Schneider Electric décline toute responsabilité quant aux conséquences de l’utilisation de ce matériel. U G U G U G U G U G U G 请保管好此说明书以供将来使用。 请访问网站 www.se.com 下载上述文件（用 户指南 ）和其他文件。 请注意 p 电气设备的安装、操作、维修和维护工作 仅限于合格人员执行。 p HeatTag 电能测量模块必须安装在配电柜 或配电箱内部，由柜门或挡板隔离，避免未 经授权的接触或误接触。 p 在安装和使用本产品时，必须遵守国家、 地区和当地的所有相关的安全法规。 p Schneider Electric 不承担由于使用本资料 所引起的 任何后果 U G U G www.se.com HeatTag U G 2/12MFR5173801-02 RISCHIO DI FOLGORAZIONE, ESPLOSIONI O ARCO ELETTRICO p Utilizzare dispositivi di protezione individuale (DPI) idonei e adottare misure di sicurezza adeguate per lavori elettrici. Vedere le normative NFPA 70E, CSA Z462, …

Text truncated - open the document above for the full version.

Schneider Electric Industries SAS Postal address / Adresse postale : Site 38EQI 31, rue Pierre Mendès France - Eybens F-38050 Grenoble Cedex 9 Tel. +33 (0)4 76 57 60 60 http://www.schneide r-electric.com Legal information / Mentions légales Société par actions simplifiée au capital de 896 313 776 euros 954 503 439 rcs Nanterre – code APE : 2712Z Siret : 954 503 439 01214 n° ident. TVA : FR 04 954 503 439 siège social : 89, boulevard Franklin Roosevelt F – 92505 Rueil-Malmaison Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2/16/2021 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AH7L-HTAGV2 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Christophe PRETAVOINE Director for Certification Schneider Electric industries SAS

Schneider Electric Industries SAS Postal address / Adresse postale : Site 38EQI 31, rue Pierre Mendès France - Eybens F-38050 Grenoble Cedex 9 Tel. +33 (0)4 76 57 60 60 http://www.schneide r-electric.com Legal information / Mentions légales Société par actions simplifiée au capital de 896 313 776 euros 954 503 439 rcs Nanterre – code APE : 2712Z Siret : 954 503 439 01214 n° ident. TVA : FR 04 954 503 439 siège social : 89, boulevard Franklin Roosevelt F – 92505 Rueil-Malmaison Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2/16/2021 Request for Permanent Confidentiality Company name: Schneider Electric industries SAS FCC ID: 2AH7L-HTAGV2 FCC Part 15 Certification Gentlemen, In accordance with CFR 47 § 0.457 and CFR 47 § 0.459 Schneider Electric Industries SAS hereby requests confidentiality of following attachments: (1) schematic diagrams, (2) detailed block diagrams, (3) detailed operational descriptions, (4) parts lists. These documents contain detailed system and equipment description and related information about the product which Schneider Electric Industries SAS considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Schneider Electric Industries SAS considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Christophe PRETAVOINE Directof for products certification Schneider Electric Industries SAS 31, rue Pierre Mendès France - Eybens F-38050 Grenoble Cedex 9

FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Front Rear FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Top Bottom FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Left Right FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Coonector Dimensions (mm /inches)

200715HeatTag2.0 definition Design Lab Europe HeatTag V2 - Sticker definition 15-07-2020 Raphaël SEAUVE

FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Motherboard Top RF Chip FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Motherboard Bottom FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 Power Supply Top Power Supply Bottom

Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 14 RF-EXPOSURE REPORT FCC 47 CFR Part 2.1091 ISED RSS-102 Maximum permissible exposure Report Reference No G0M-2102-9631-TFC091MP-V01 Testing Laboratory Eurofins Product Service GmbH Address Storkower Str. 38c 15526 Reichenwalde Germany Accreditation A2LA Accredited Testing Laboratory, Certificate No.: 1983.01 FCC Test Firm Designation Number: DE0008 ISED Testing Laboratory site: 3470A-2 Applicant Schneider Electric Address Electropole 38EQI 31 avenue Pierre-Mendes France 38050 Eybens FRANCE Test Specification According to FCC/ISED rules Standard FCC 47 CFR 2.1091 ISED RSS-102 Non-Standard Test Method None Equipment under Test (EUT): Product Description Heat Tag Model(s) SMT10020 Additional Model(s) None Brand Name(s) SCHNEIDER ELECTRIC Hardware Version(s) None Software Version(s) None FCC ID 2AH7L-HTAGV2 IC 21522-HTAGV2 Contains FCC ID -/- Contains IC -/- Test Result PASSED Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 14 VERSION HISTORY Version History Version Issue Date Remarks Revised By 01 2021-03-03 Initial Release Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 14 ABBREVIATIONS AND ACRONYMS Acronyms Acronym Description EIRP Equivalent Isotropic Radiated Power EUT Equipment Under Test MPE Maximum Permissible Exposure Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 14 REPORT INDEX 1 Equipment (Test Item) Under Test................................................................................................... 6 1.1 Reference Documents ................................................................................................................................... 7 1.2 Power density radiation sources.................................................................................................................... 8 1.3 Field strength radiation sources .................................................................................................................... 8 1.4 Concurrent Sources ...................................................................................................................................... 8 2 Result Summary ................................................................................................................................. 9 3 RF-Exposure classification ............................................................................................................ 10 4 RF-Exposure limits .......................................................................................................................... 11 5 RF-Exposure Evaluation ................................................................................................................. 12 6 Single Source Evaluation Results - FCC ...................................................................................... 13 7 Single Source Evaluation Results - ISED ..................................................................................... 14 Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 14 1 Equipment (Test Item) Under Test Description Heat Tag Model SMT10020 Additional Model(s) None Brand Name(s) SCHNEIDER ELECTRIC Serial Number(s) None Hardware Version(s) None Software Version(s) None FCC ID 2AH7L-HTAGV2 Contains FCC ID -/- IC 21522-HTAGV2 Contains IC -/- Equipment type End Product Environment General public Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 7 of 14 1.1 Reference Documents Document Type Document No. Issued by Date Test Report 47 CFR Part 15.247 & RSS-247 Issue 2 & RSS- Gen Issue 5 N°: 167895-752742- A(FILE#1040285) LCIE Laboratoire Central des Indutries Electriques 2021-02-19 Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 8 of 14 1.2 Power density radiation sources Mode Operating Frequency [MHz] Maximum conducted power [dBm] Maximum radiated power [dBm EIRP] Maximum duty cycle [%] Maximum antenna gain [dBi] Maximum antenna diameter [cm] IEEE 802.15.4 (2.4 GHz) 2440 2.49 6.49 100 4.0 N/A Comment: 1.3 Field strength radiation sources None 1.4 Concurrent Sources No concurrent radiation sources Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 9 of 14 2 Result Summary FCC MPE Evaluation - Single radiation sources Product Standard Reference Requirement Reference Method Mode Distance [m] Verdict 47 CFR 2.1091 Maximum permissible exposure FCC KDB 447498 IEEE 802.15.4 (2.4 GHz) 0.20 PASS Comment: ISED MPE Evaluation - Single radiation sources Product Standard Reference Requirement Reference Method Mode Distance [m] Verdict ISED RSS-102 Maximum permissible exposure ISED RSS-102 IEEE 802.15.4 (2.4 GHz) 0.20 PASS Comment: Test Report No.: G0M-2102-9631-TFC091MP-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 10 of 14 3 RF-Exposure classification RF-Exposure Categories Fixed A fixed device is defined as a device physically secured at one fixed location and cannot be easily re-located. Mobile A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. Portable A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of …

Text truncated - open the document above for the full version.

ZIGBEE Template: Release February 6, 2020 This document shall not be reproduced, except in full, without the written approval of the LCIE. This document contains results related only to the items tested. It does not imply the conformity of the whole production to the items tested. Unless otherwise specified or rule defined by the test method, the decision of conformity doesn’t take into account the uncertainty of measures. This document doesn’t anticipate any certification decision.The COFRAC accreditation attests the technical capability of the testing laboratory for the only tests covered by the accreditation. If some tests mentioned in this report are carried out outside the framework of COFRAC accreditation, they are indicated by the symbol. Accreditation N°1-1633 Scope available on www.cofrac.fr TEST REPORT N°: 167895-752742-A(FILE#1040285) Version : 04 Subject Radio spectrum matters tests according to standards: 47 CFR Part 15.247 & RSS-247 Issue 2 & RSS-Gen Issue 5 Issued to SCHNEIDER ELECTRIC 38EQI 31 rue Pierre Mendès 38320 - EYBENS France Apparatus under test  Product Heat Tag  Trade mark SCHNEIDER ELECTRIC  Manufacturer SCHNEIDER ELECTRIC  Model under test SMT10020  Serial number RN20245010004 / RN20245010005  FCC ID 2AH7L-HTAGV2  IC 21522-HTAGV2 Conclusion See Test Program chapter Test date June 22, 2020 to June 29, 2020 Test location Moirans Test Site 6500A-1 & 6500A-3 Sample receipt date June 22, 2020 Composition of document 68 pages Document issued on February 19, 2021 Written by : Approved by : Majid MOURZAGH Anthony MERLIN Tests operator Technical manager TEST REPORT N° 167895-752742-A Version : 04 Page 2/68 PUBLICATION HISTORY Version Date Author Modification 01 July 6 , 2020 Majid MOURZAGH Creation of the document 02 July 8 , 2020 Majid MOURZAGH Correction of test operator name 03 July 15, 2020 Majid MOURZAGH Add Setting used during test for Power output( in dBm) at 5,0 ( see §2.2) 04 February 19, 2021 Majid MOURZAGH Adding COFRAC Accreditation Each new edition of this test report replaces and cancels the previous edition. The control of the old editions of report is under responsibility of client. TEST REPORT N° 167895-752742-A Version : 04 Page 3/68 SUMMARY 1. TEST PROGRAM ............................................................................................................................... 4 2. EQUIPMENT UNDER TEST: CONFIGURATION (DECLARED BY PROVIDER) ................................ 5 3. OCCUPIED BANDWIDTH ................................................................................................................. 10 4. 6DB EMISSION BANDWIDTH .......................................................................................................... 13 5. MAXIMUM CONDUCTED OUTPUT POWER ................................................................................... 16 6. POWER SPECTRAL DENSITY ........................................................................................................ 19 7. UNWANTED EMISSIONS INTO NON-RESTRICTED FREQUENCY BANDS AT THE BAND EDGE 22 8. UNWANTED EMISSIONS INTO NON-RESTRICTED FREQUENCY BANDS ................................... 25 9. AC POWER LINE CONDUCTED EMISSIONS.................................................................................. 29 10. UNWANTED EMISSIONS IN RESTRICTED FREQUENCY BANDS ................................................ 37 11. UNCERTAINTIES CHART ................................................................................................................ 68 TEST REPORT N° 167895-752742-A Version : 04 Page 4/68 1. TEST PROGRAM References  47 CFR Part 15.247  RSS 247 Issue 2  RSS Gen Issue 5  KDB 558074 D01 DTS Meas Guidance v05r02  ANSI C63.10-2013 Radio requirement: Clause (47CFR Part 15.247 & RSS-247 Issue 2 & RSS-Gen Issue 5) Test Description Test result - Comments Occupied Bandwidth  PASS  FAIL  NA  NP(1) 6dB Bandwidth  PASS  FAIL  NA()  NP(1) Duty Cycle   PASS  FAIL  NA  NP(1) Maximum Conducted Output Power  PASS  FAIL  NA  NP(1) Power Spectral Density  PASS  FAIL  NA  NP(1) Conducted Spurious Emission at the Band Edge  PASS  FAIL  NA()  NP(1) Unwanted Emissions into Non-Restricted Frequency Bands  PASS  FAIL  NA()  NP(1) AC Power Line Conducted Emission  PASS  FAIL  NA(2)  NP(1) Unwanted Emissions into Restricted Frequency Bands  PASS  FAIL  NA  NP(1) Receiver Radiated emissions   PASS  FAIL  NA  NP(1) This table is a summary of test report, see conclusion of each clause of this test report for detail. (1): Limited program (2): EUT not directly or indirectly connected to the AC Power Public Network PASS: EUT complies with standard’s requirement FAIL: EUT does not comply with standard’s requirement NA: Not Applicable NP: Test Not Performed TEST REPORT N° 167895-752742-A Version : 04 Page 5/68 2. EQUIPMENT UNDER TEST: CONFIGURATION (DECLARED BY PROVIDER) 2.1. HARDWARE IDENTIFICATION (EUT AND AUXILIARIES): Equipment under test (EUT): SCHNEIDER ELECTRIC SMT10020 Serial Number: RN20245010004 / RN20245010005 Equipment Under Test Power supply: During all the tests, EUT is supplied by V nom : 110Vac/60Hz For measurement with different voltage, it will be presented in test method. Name Type Rating Reference / Sn Comments Supply1  AC  DC  Battery 110-277Vac 50-60Hz 0.1A / / Voltage table used (for Power Line Conducted Emissions): Type Measurement performed:  AC  110VAC/60Hz  240VAC/50Hz Used only for test:AC Power Line Conducted Emissions. TEST REPORT N° 167895-752742-A Version : 04 Page 6/68 Inputs/outputs - Cable: Access Type Length used (m) Declared <3m Shielded Under test Comments 1 Line+Neutral 1    / Auxiliary equipment used during test: Type Reference Sn Comments Laptop LENOVO P51 LVSE074700 / Interface Board SMARTRF05EB 0x4708 Rev.:1.8.1.2 Equipment information: Type:  ZIGBEE  RF4CE Frequency band: [2400 – 2483.5] MHz Number of Channel: 16 Spacing channel: 5MHz Channel bandwidth: 2MHz Antenna Type:  Integral …

Text truncated - open the document above for the full version.

FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631 FCC ID: 2AH7L‐HTAGV2 IC: 21522‐HTAGV2 HVIN: 2.0.0 G0M‐2102‐9631