2AHAF-MDT765Tablet

Topicon HK Ltd Topicon HK Ltd Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN www.topicon.hk www.topicon.hk There are RS232 interfaces and OTG from cradle. Highlight: OTG port from device (10pin usb connector) and cradle are sharing same pins. Only 1 OTG interface can be used. This cable can be customized when you placed order. For sample, it will be 12 USB connector for pins connector, pls see below OTG or charging or pins assignment. To learn more about installations & start guides or more services, pls contact us: [email protected] or follow us on YouTube channel “Topicon HK Ltd”. Interface Quick Start Guide Mobile Data Terminal MDT765 Topicon HK Ltd Topicon HK Ltd Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN www.topicon.hk www.topicon.hk Procesor Quad-core 2GHz Storage ROM (SLC/MLC) ：32G NAND flash RAM (DDR)： 4GB DDR4 Extend Slot.: microSD (TF), do 128G Camera Rear: 16Mpixel autofocus camera Screen 1280x800; capacitive touch Network 2G/3G/4G WIFI 802.11 b/g/n Bluetooth V2.1 & V4.0 Lora Optional NFC Supported GPS GNSS/ Glonass/ Galileo Power USB: MiniUSB / Pogo Pins with adapter: 12 - 24V Camera Input 1 x analog, 1 x 720P, 1 x AHD camera Battery 4300mAh OS Android (12) Parameters • Insert the SIM card with the gold contacts facing up. • Insert the Micro SD card with gold contacts facing up. • Push the card in the direction of the arrow as shown • in the figure. • SIM card/SD card cover can be locked by screws in preventing from loss or steal. PLEASE CHARGE AND DISCHARGE THE DEVICE AS ONE CYCLE AT ROOM TEMPERATATURE WHEN DEVICES ARE STORED FOR HALF YEAR OR ABOVE. Topicon’s device management server is developed to allow customer to update different firmware and make kiosk mode function: • BOOT ANIMATION • INSTALL APK • ADD APN • DEFAULT SETTING TF/SIM card Notices & Warnings Customization Services Topicon HK Ltd Topicon HK Ltd Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN www.topicon.hk www.topicon.hk EU Declaration of Conformity for RED Directive and RoHS Directive We, TOPICON HK LIMITED ___________________________________________________________________ hereby, declare that the essential requirements set out in the RED Directive 2014/53/EU, RoHS Directive 2011/65/EU and its amendment (EU) No 2015/863. have been fully fulfilled on our product with indication below: Product Name: Tablet Brand Name: / Model No.: MDT765,MDT760, MDT761, OBC760, OBC765, MDT785, M710A, M710B, M720A, M720B, MDT714D, MDT715D, MDT716D, M725A, M725B, 100861, LAR-1192, LARDIS_H4L The following standards have been applied for the investigation of compliance: ETSI EN 301 511 V12.5.1 (2017-03) ETSI EN 301 908-1 V15.2.1 (2023-01) ETSI EN 301 908-2 V13.1.1 (2020-06) ETSI EN 301 908-13 V13.2.1 (2022-02) ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 300 220-1 V3.1.1 (2017-02) ETSI EN 300 220-2 V3.2.1 (2018-06) ETSI EN 300 330 V2.1.1 (2017-02) ETSI EN 303 413 V1.2.1 (2021-04) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.3.2 (2023-01) ETSI EN 301 489-17 V3.2.4 (2020-09) ETSI EN 301 489-19 V2.2.1 (2022-09) ETSI EN 301 489-52 V1.2.1 (2021-11) EN 50663:2017 EN 62209-2:2010+AMD1:2019 EN 50566:2017 EN IEC 62368-1:2020+A11:2020 Furthermore, the ISO requirement for the in-process quality control procedure as Attention The tablet and battery should not be thrown into a fire and should not be used in places where the temperature exceeds the specified values. It may cause a fire or explosion of the battery. In addition, it will cause a leakage and will greatly reduce the functionality or the tablet cannot be used anymore. If you are charging the battery or using a tablet and you realize that the case temperature is unusually high because the battery has overheated, close applications. Do not charge the battery continuously for more than 24 hours. Ignoring these precautions could void your warranty. Please charge and discharge the device in one cycle at room temperature if the device is stored for half a year or more. Do not try to repair, adapt or disassemble the device without proper knowledge and precautions, as this may lead to dangerous situations with possible damage to the product. Do not use in extreme conditions such as high and low temperatures, high humidity or humid environments and near magnetic fields. Avoid prolonged exposure to sunlight. Use only accessories authorized by the manufacturer to avoid damage to the product and possible loss of warranty. Topicon HK Ltd Topicon HK Ltd Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN Rm 2314, Tower C HuangDu Plaza, Yitian Road, Futian District, Shenzhen 518048, CN www.topicon.hk www.topicon.hk well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection. Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration. Manufacturer Contact Company: TOPICON HK LIMITED Address: Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Name &Title: Keller Sin/Sales Director Tel No.,: (86) 755-82549331 Fax No.,: (86) 755-82549331 E-mail: [email protected] Signature Date 2024/5/9 IEC 62321-3-1:2013, IEC 62321-4:2017, IEC 62321-5:2013, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-6:2015, IEC 62321-8:2017 And apply notified body assessment: Notified Body number 1177 Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615, America Software Version: mdt765_ngms_2.0.4 Har…

Text truncated - open the document above for the full version.

TOPICONHKLIMITED Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict,Shenzhen,China Date:2024-06-07 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing SUBJECT:FCCApplicationforFCCID:2AHAF-MDT765 ToWhomItMayConcern: TOPICONHKLIMITEDcertifiesthat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified ontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing “covered”equipment. Sincerely, Signatory [kellersin,salesdirector]

TOPICONHKLIMITED Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict,Shenzhen,China Date:2024-06-07 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA FCCID:2AHAF-MDT765 ApplicantFRN:0025168154 USAgent–AttestationStatement/Part2.911(d)(7) TOPICONHKLIMITEDcertifiesthat,asof2024-06-07,wehavedesignatedFCCUSAgent, LLCtoacceptserviceofprocessonourbehalfforFCCID:2AHAF-MDT765. TOPICONHKLIMITED,acceptstomaintainanagentofserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedall marketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationof beingthedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfof TOPICONHKLIMITEDforFCCID:2AHAF-MDT765. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC U.S.AgentFRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:TOPICONHKLIMITEDDesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:kellersinDesignatedAgentRepresentative:TimPayne Signature:Signature:

TOPICONHKLIMITED Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict,Shenzhen,China Date:2024-06-07 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2AHAF-MDT765 ToWhomItMayConcern: I,theundersigned,herebystatesthisequipmenthasbeentestedandfoundtocomplywiththelimitsfora ClassBdigitaldevice,pursuanttopart15oftheFCCRules,andwillapplytheSupplier'sDeclarationof ConformityproceduretothePart15ClassBDigitalandreceiversthatoperateintherangebetween30 and960MHzofthiscompositedevice.IunderstandthefollowingFCCrequirements: 1.DevicessubjecttotheSDoCprocedurearerequiredtobetestedtoshowcompliancewiththeFCC technicalregulationsbyarecognizedaccreditedtestinglaboratory.Thetestinglaboratorymustbe accreditedbyaCommissionapprovedaccreditationbodyordesignatedunderthetermsofa government-to-governmentMutualRecognitionAgreement(MRA).Alistingofthoseaccreditedtesting laboratoriesthathavebeenrecognizedbytheCommissionispublishedontheFCCWebpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm(Selectthe"accredited"optiontosearchfor FCCrecognizedaccreditedtestfirms.) 2.Pt2.1077containsthelistofinformationthatmustbeincludedintheSupplier'sDeclarationof Conformity,whichmustbesuppliedwitheachproductsold.TheSDoCcomplianceinfoshallbeincluded intheUser’sManualorasaseparatesheet.Theinfomustcontainthename,address,andphone numberoftheresponsibleparty,whichmustbelocatedwithintheUnitedStates.Accordingto 2.909(b),theresponsiblepartyiseithertheManufactureroriftheproductisimportedtheImporter. Sincerely, Signatory [kellersin,salesdirector]

TOPICONHKLIMITED Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict,Shenzhen,China Date:2024-06-07 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2AHAF-MDT765 ConfidentialityRequest Towhomitmayconcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,wearerequestingthe Commissiontowithholdthefollowingattachment(s)asconfidentialdocumentsfrompublicdisclosureindefinitely. ☒ BlockDiagram ☒ Tune-UpInformation ☒ OperationalDescription ☐ SecurityInformation ☒ Schematics ☐ SoftwareDefinedRadio(SDR)Information ☒ PartsList Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovideunjustifiedbenefitstoits competitors. Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulationsinTitle47CFR §2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthatbusinesssensitiveinformation remainsconfidentialuntiltheactualmarketingofnewlyauthorizeddevices,werequestShortTermConfidentiality ofthefollowingattachment(s); ☐ ExternalPhotos ☐ TestSetupPhotos ☐ InternalPhotos ☐ UserManual ☐For45days,pursuanttoPublicNoticeDA04-1705. or ☐For180dayspursuanttoKDB726920D01. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthisapplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, Signatory [kellersin,salesdirector]

TOPICONHKLIMITED Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict,Shenzhen,China Date:2024-06-07 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2AHAF-MDT765 POWEROFATTORNEY ToWhomItMayConcern: We,theundersigned,herebyauthorizeWaltekTestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalf,to applytotheFederalCommunicationsCommissiononourequipment.AnyandallactscarriedoutbyWaltek TestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalfshallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,TOPICONHKLIMITEDare notsubjecttoadenialoffederalbenefitspursuanttoSection5301oftheAnti-DrugActof1988,21USC853a, andnopartytotheapplicationissubjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, Signatory [kellersin,salesdirector]

ReferenceNo.:WTX24X04085568W001/002/003/004/005/006Page2of14 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT2-EUTEXTERNALPHOTOGRAPHS EUTView1 EUTView2 ReferenceNo.:WTX24X04085568W001/002/003/004/005/006Page3of14 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView3 EUTView4 ReferenceNo.:WTX24X04085568W001/002/003/004/005/006Page4of14 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView5 EUTView6 ReferenceNo.:WTX24X04085568W001/002/003/004/005/006Page5of14 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView7 EUTView8 ReferenceNo.:WTX24X04085568W001/002/003/004/005/006Page6of14 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView9

Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 1 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AHAF-MDT765 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 7 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 8 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT Housing and Board View 3 Solder Board-Component View 1 Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 9 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 2 Solder Board-Component View 3

Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 10 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 4 Solder Board-Component View 5 Reference No.: WTX24X04085568W001/002/003/004/005/006 Page 11 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Antenna View 1 Antenna View 2 WIFI/BT Ant GPS Ant MAIN Ant. DIV Ant. NFC Ant

COMOSAR E-Field Probe Calibration Report Ref: ACR.197.12.23.BES.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD 1庙、.，ROOM 101, BUILDING 1, HONGWEI INDUSTRIAL PARK‘LIUXIAN 2ND ROAD‘BLOCK70 BAO' AN DISTRICT, SHENZHEN, GUANGDONG , CIDNA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 18/21 EPG0356 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Il'oise -295 avenue Alexis de Rocholl 29280 PLOUZANE -FRANCE Calibration date: 07/07/2023 dI;;2%ωkω 二三〉七二乞3三-τ......吃Z ~事三五2句P L。τ二号飞~..;~型L...... 〈久/，飞.\.~，.~ .".... "，川AJZ丽丽在 Accreditations #2-6789 Scope available 011 ~坠应些丘坐立 Thc usc of thc Cofl'l1c bl'and and thc acc，'εditation I'CfCl'fnCfS is pl'ohibited fl'om ally "Clll'oductioll, SU111111αry: This document presents the method and results from an accredited COMOSAR E-Field Probe calibration performed at MVG, using the CALIPROBE t巳stbench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI), Pαge: 1/11 Prepαred by.' Checked by.' Approved by : Issue A COMOSAR E-FIELD PROBE CALIllRATION REPORT Nαme Function Jérδme Le Gall Measurement Responsible Jérôme Luc Yann Toutain Distribution .' Technical Manager Laboratory Director Customer Name Waltek Testing Group (Shenzhen) Co. , Ltd Dafe 7/7/2023 7 /7/2023 7 /7/2023 Ref: ACR.197.12.23.BES.A SÌJ!l1ature < ?若7 7山市ιmtrlAl Signature Ya n n numérique de Yann Toutain ID Toutain ID Date:2023.07.07 08:53:35 +01 '00' Name Date Modi[ìcafiol1s JérδmeLuc 7/7/2023 lnitial release Page: 2/11 TellψlrtttLA CR.DDD.N.YXAJVCB.ISSUE-COAIOSAR Probe vI ηlis doc1Imel1l slwlll10l be repl'Od1lced.由cepl川f1l1101' il1 parl. lI'ilh01l1lhe lI'rillel1 appl'Ovall叭.fVG.The il1formaliol1 cOl1lail1ed hereil1 isωbe 1Ised ol1ly f or Ihe pwpose.for lI'hich il is s1lb川ifledal1d is 110110 be released川lI'holeorparl川的oulll'rillel1appl'Ol'all扩MVG COMOSAR E-FIELD PROBE CALlBRA TION REPORT Ref: ACR.197.12.23.BES.A TABLE OF CONTENTS Oevice Under Test ........................................ .............................................................4 2 Product Description ............ .......................................................................................4 2.1 General Information 4 3 Measurement Method ........川..... 川.......川........ .......川.......川.......川........ ...... .. .......川.......川.......川........ ...... .. .......川.......川........ .......川........ .......川........ .......川.......川.......川........ .......川........ ...... .. ...... .. .......川........ ...... .. ...... .. .......川.......川........ ...... .. ...... .. .......川........ .......川.......川........ ...... .. ...... .. .......川........ .......川.......川........ ...... .. ...... .. ...... .. ...... .. .......川........ .......川........ ...... .. .......川.......川.......川........ .......川.......川........ .......川........ .......川.......川........ ...... .. ...... .. ...... .. .......川........ ...... .. .......川.......川.......川........ ...... .. .......川........ .......川.......川.......川........ ...... .. .......川........ ...... .. .....4 3.1 Linearity 4 3.2 Sensitivity 5 3.3 Lower Detection Limit 5 3 .4 Isotropy 5 3.1 Boundary Effect 5 4 Measurement Uncertainty....... . ..................................................................................6 5 Calibration Measurement Reslllts .. ............................................................................ 6 5.1 Sensitivity in air 5.2 Linearity 5.3 Sensitivity in liqllid 5.4 Isotropy rO 叮 foony 6 List ofEqllipn1ent ..................................... ...............................................................10 Pα'ge: 3/ /1 TemplalιACR.DDD.N. Y}~II1VGB.ISSUιCOilIOSAR Prabe 1'1 This dOClflllell1 shallllOl be reprodllced. excepl ill f llll Or ill parl. lI'ilholll Ihe川.illellapprol'Ol 0/ MVG. The iliforlllalioll cOlllailled hereill is 10 be IIsed olll)'for Ihe pwpose/or lI'hich it is SlIblllitted alld is 1101 1 0 be released ill1l'h ole o r parl 1I'ilholll 11'川Ilellapprol'ol (扩MVG. COMO SAR E-FIELD PROBE C ALIBRATION REPORT Ref: ACR. 197. 12.23.BES.A 1 DEVICE UNDER TEST Oevice Under Test Device Type COMOSAR DOSI1\咀~TRICE FIELD PROBE Manu也cturer MVG Model SSE2 Serial Number SN 18/21 EPG0356 Product Condition (new / used) New Frequency Range of Probe 0.15 GHz-6GHz Resistance ofThree Dipoles at Connector Dipole 1: Rl=0.221 MQ Dipole 2: R2=0.197 MQ Dipole 3: R3=0.195 MQ 2 PRODUCT DESCRIPTION 2.1 GENERAL INFOR.r..ι生TION MVG's COMOSAR E fteld Probes are built in accordance to the IEEE 1528, FCC KDB865664 DO 1, CENELEC EN62209 and CEI/IEC 62209 standards. Figure 1 -JvIVG COMOSA R Dosimel.ric E卢eldDipole Probe Length 330mm Length of Individual Dipoles 2mm Maximum external diameter 8mm Probe Tip External Diameter 2.5mm Distance between dipoles / probe extremity lmm 3 MEASUREMENT METHOD The IEEE 1528, FCC KDB865664 DOI, CENELEC EN62209 and CEIIIEC 62209 standards provide recommended practices for the probe calibrations , including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LlNEARITY The evaluation of the linearity was done in白.'eespace using the waveguide, performing a power sweep to cover the SAR range 0. 01 W /kg to I OOW /kg. Page: 4/11 Tel1lplatιACR.DDD.N. YY.fI1VGB.lSSUE二COiHOSARProbe叶 This doclIlllel1l sholll1ol be reprodllced. excepl ill[1I11 01' il1 parl. 11'ilhollllhe lI'r i/lel1 opp ro1'O/ o[ MVG. The il1[orlllOliol1 COI1Iαilled hereil1 is 10 be IIsed 0 11/)'[01' Ihe plllpose[orll'hich il is Sl削li/ledal1d is 110110 be 阿/easedil1l1'ho/e 01' parlll'il/101I1呐illel1apprOl'a / o[MVG COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.197. 12.23.BES.A 3.2 SENSITIVITY The sensitiv川it印yt臼actorsof the th阳ueedi怡po叶le臼swe町redete创rm and tiss饥sues剑1mη111川l川la创川tingliqu川id均)u山singwavegu山idesas outlined in the standards. 3 .3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurem…

Text truncated - open the document above for the full version.

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 151 TESTREPORT ReferenceNo.......................: WTX24X04085568W FCCID....................................: 2AHAF-MDT765 Applicant...............................: TOPICONHKLIMITED Address.................................: Room2314-2316,TowerC,HuangduPlaza,YitianRoad,FutianDistrict, Shenzhen,China Manufacturer ........................ ThesameasApplicant Address ................................. ThesameasApplicant ProductName ...................... : Tablet ModelNo. .............................. : MDT765 Standards .............................. : FCCPart2.1093 IEEEStdC95.1:2019 IEEEStdC95.3:2002+Rev.2008 IEC/IEEE62209-1528Ed.1.0(2020-10) DateofReceiptsample.....: 2024-04-17 DateofTest ........................... : 2024-04-20to2024-06-04 DateofIssue........................: 2024-06-05 TestReportFormNo. ......... :WTX_IEEE_1528W TestResult ............................ :Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbereproduced, exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithoutspecific stampoftestinstituteandthesignaturesofapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby: Approvedby: JackSunJasonSu ReferenceNo.:WTX24X04085568W WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 151 TABLEOFCONTENTS 1.GeneralInformation....................................................................................................................................................4 1.1ProductDescriptionforEquipmentUnderTest(EUT).........................................................................................4 1.2TestStandards.....................................................................................................................................................7 1.3TestMethodology.................................................................................................................................................7 1.4TestFacility..........................................................................................................................................................7 2.SummaryofTestResults...........................................................................................................................................8 3.SpecificAbsorptionRate(SAR)................................................................................................................................9 3.1Introduction..........................................................................................................................................................9 3.2SARDefinition......................................................................................................................................................9 4.SARMeasurementSystem......................................................................................................................................10 4.1TheMeasurementSystem.................................................................................................................................10 4.2Probe..................................................................................................................................................................10 4.3ProbeCalibrationProcess.................................................................................................................................12 4.4Phantom.............................................................................................................................................................13 4.5DeviceHolder.....................................................................................................................................................13 4.6TestEquipmentList...........................................................................................................................................14 5.TissueSimulatingLiquids.......................................................................................................................................15 5.1CompositionofTissueSimulatingLiquid...........................................................................................................15 5.2TissueDielectricParametersforHeadandBodyPhantoms.............................................................................16 5.3TissueCalibrationResult...................................................................................................................................17 6.SARMeasurementEvaluation.................................................................................................................................19 6.1PurposeofSystemPerformanceCheck............................................................................................................19 6.2SystemSetup.....................................................................................................................................................19 6.3ValidationResults..............................................................................................................................................21 7.EUTTestingPosition................................................................................................................................................22 7.1DefineTwoImaginaryLinesonTheHandset....................................................................................................22 7.2CheekPosition...................................................................................................................................................23 7.3TiltedPosition..................................................................…

Text truncated - open the document above for the full version.

UNLESS OTHER SPECIFIED TOLERANCES ON： ：： ： X＝ ＝＝ ＝± ±± ± X.X＝ ＝＝ ＝± ±± ± X.XX＝ ＝＝ ＝ ANGLES＝ ＝＝ ＝± ±± ± HOLEDIA＝ ＝＝ ＝± ±± ± INPAQ TECHNOLOGY CO., LTD. SCALE： ：： ： ----- UNIT： ：： ：mm DRAWN BY： ：： ：宇恩佐 宇恩佐宇恩佐 宇恩佐 CHECKED BY： ：： ：趙彥年 趙彥年趙彥年 趙彥年 DESIGNED BY： ：： ：黃啟傑 黃啟傑黃啟傑 黃啟傑 APPROVED BY ： ：： ：蘇志銘 蘇志銘蘇志銘 蘇志銘 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE： ：： ：ACM3-5036-A1-CC-S Specification NO. ENS000062410 A0 ACM3-5036-A1-CC-S Specification 1. Features and Application This product is for 2.4/5 GHz Dual Band WiFi, 802.11 a/b/g/n, Zigbee, Bluetooth,... 2. Explanation of Part Number AC M3 - 5036 - A1 - CC - S _ (1) (2) (3) (4) (5) (6) (7) (1) Product Type: Chip Antenna (2) Center Frequency/Band Code: 2.4/5 GHz Dual Band (3) Size Code: 5.0*3.6 mm (Length*Width) (4) Design Revision Code: Rev. 1 (5) Antenna Type: Coupling Ceramics (6) Special Code: RoHS Compliant (7) Suffix For Special Requirements 3. Electrical Specification Item Specification Frequency Band 2400 ~ 2500 MHz 5000 ~ 6000 MHz Polarization Linear Impedance 50 ohm Typ. VSWR Less than 2.0 Less than 2.0 *Peak Gain 3.0 dBi Typ. 3.3 dBi Typ. *Peak Efficiency 73.4% Typ. 80.2% Typ. * Test condition: Test board size 80*40 mm Matching circuit may be required Add: J2, 14th Floor, Zhao Feng Universe Building Block, No. 1800 Zhongshan West Road, Xuhui District, Shanghai City 200235, China UNLESS OTHER SPECIFIED TOLERANCES ON： ：： ： X＝ ＝＝ ＝± ±± ± X.X＝ ＝＝ ＝± ±± ± X.XX＝ ＝＝ ＝ ANGLES＝ ＝＝ ＝± ±± ± HOLEDIA＝ ＝＝ ＝± ±± ± INPAQ TECHNOLOGY CO., LTD. SCALE： ：： ： ----- UNIT： ：： ：mm DRAWN BY： ：： ：宇恩佐 宇恩佐宇恩佐 宇恩佐 CHECKED BY： ：： ：趙彥年 趙彥年趙彥年 趙彥年 DESIGNED BY： ：： ：黃啟傑 黃啟傑黃啟傑 黃啟傑 APPROVED BY： ：： ：蘇志銘 蘇志銘蘇志銘 蘇志銘 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE： ：： ：ACM3-5036-A1-CC-S Specification NO. ENS000062410 A0 PAGE 2 OF 9 - 4. Physical Dimension Top view Bottom view Marking is Black L 5.20 ± 0.30 W 3.70 ± 0.30 H 0.70 ± 0.15 A 0.45 ± 0.25 B 0.45 ± 0.25 L1 1.10 ± 0.20 W1 0.55 ± 0.20 (Unit: mm) L W H A B L UNLESS OTHER SPECIFIED TOLERANCES ON： ：： ： X＝ ＝＝ ＝± ±± ± X.X＝ ＝＝ ＝± ±± ± X.XX＝ ＝＝ ＝ ANGLES＝ ＝＝ ＝± ±± ± HOLEDIA＝ ＝＝ ＝± ±± ± INPAQ TECHNOLOGY CO., LTD. SCALE： ：： ： ----- UNIT： ：： ：mm DRAWN BY： ：： ：宇恩佐 宇恩佐宇恩佐 宇恩佐 CHECKED BY： ：： ：趙彥年 趙彥年趙彥年 趙彥年 DESIGNED BY： ：： ：黃啟傑 黃啟傑黃啟傑 黃啟傑 APPROVED BY： ：： ：蘇志銘 蘇志銘蘇志銘 蘇志銘 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE： ：： ：ACM3-5036-A1-CC-S Specification NO. ENS000062410 A0 PAGE 3 OF 9 - 5. Recommend PCB Layout Layout Pad Dimensions on PCB Layout Top View Perspective View (Unit: mm) UNLESS OTHER SPECIFIED TOLERANCES ON： ：： ： X＝ ＝＝ ＝± ±± ± X.X＝ ＝＝ ＝± ±± ± X.XX＝ ＝＝ ＝ ANGLES＝ ＝＝ ＝± ±± ± HOLEDIA＝ ＝＝ ＝± ±± ± INPAQ TECHNOLOGY CO., LTD. SCALE： ：： ： ----- UNIT： ：： ：mm DRAWN BY： ：： ：宇恩佐 宇恩佐宇恩佐 宇恩佐 CHECKED BY： ：： ：趙彥年 趙彥年趙彥年 趙彥年 DESIGNED BY： ：： ：黃啟傑 黃啟傑黃啟傑 黃啟傑 APPROVED BY： ：： ：蘇志銘 蘇志銘蘇志銘 蘇志銘 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPR…

Text truncated - open the document above for the full version.