2AJRDIT-92Bluetooth AM/FM Radio Headphones

Bluetooth AM/FM Radio Headphones IT-92 FIG 1FIG 2FIG 3 ANSI S3.19-1974 Table (NRR Table) A1: Frequency, Hz 125250500100020003150400063008000NRRCSA A2: Grand Mean Attenuation, dB 19.723.129.335.833.237.143.040.038.6 25A A3: Standard Deviation, dB 3.62.33.12.72.32.73.13.43.9 EN 4-6 DA 7-9 DE 10-12 ES 13-15 FI 16-18 FR 19-21 IT 22-24 NL 25-27 NO 28-30 SV 31-33 ISOtunes ® AIR DEFENDER AM/FM BT 54 EN EN Important Please read, understand, and follow all safety information. This hearing protector is specifically designed for use in noisy environments, provided it is properly used and the protector remains clean and undamaged. Model IT-92 : ISOtunes AIR DEFENDER AM/FM BT Full manual can be found at ISOtunes.com/manuals. Includes ISOtunes AIR DEFENDER AM/FM BT comes with: • USB-C charging cable • 3.5 mm auxiliary audio cable Fitting Reference the fitting illustrations on page 2. 1. Pull the earcups apart (Fig. 1). 2. Place the product on your head (Fig. 2). 3. Adjust the earcup position by extending the headband to ensure a good fit around the ears (Fig. 3). Controls For an overview of product controls, see the Quick Start Guide included in the packaging or reference the Online Manual at ISOtunes.com/manuals. Power On/Off Power ON: Press and hold the power button Power OFF: Press and hold the power button Change Audio Mode 1. Press the Power/Mode button to switch between AM, FM, and Bluetooth modes. 2. Plug in the 3.5 mm cable for AUX mode. Volume To adjust the volume, turn the volume knob on the bottom of the right earcup. AM/FM Mode Radio Tuning • Seek - press and hold the minus (-) button or plus (+) button to scan for the next station • Tune - single press the minus (-) button or plus (+) button to tune up or down Memory Preset Stations 1. To save a favorite station, first tune to the desired station. 2. Press and hold the memory button for 1 second, the display should flash once and the preset number should appear. 3. Press the minus (-) button or plus (+) button to adjust the preset number. 4. Press the memory button to save the station in the selected preset. 5. Press the memory button to cycle the preset stations. Bluetooth Mode Pair 1. The ISOtunes AIR DEFENDER AM/FM will automatically enter pairing mode when in Bluetooth mode. You will hear “Bluetooth Pairing Mode” 2. Open the Bluetooth settings on your device. Select “ISOtunes AIR DEFENDER AM/FM”. Pair and connect. Music • Play/Pause: Single press multifunction (o) button • Next Track: Single press plus (+) button • Previous Track: Single press minus (-) button Phone • Answer Call: Single press multifunction (o) button • End Call: Press and hold multifunction (o) button • Reject Call: Press and hold multifunction (o) button • Place Call on Hold/Switch to Call on Hold: Short Double Press multifunction (o) button • Mute/Unmute Microphone: Single press of multi function button during a call mutes/unmutes the call. Bluetooth Reset Press and hold the multifunction button for ten seconds. You will hear “disconnected”. Line Input To listen to music via the line input, use the 3.5 mm audio cable included. Insert one end into the headset and insert the other end into your phone or other personal media device. The headset will automatically enter AUX mode. Charging Charge the product with the included USB-C cable. Plug the USB-C input into the product and the other end into a charging port. The Battery Icon will flash on the LCD display to indicate the battery is charging. The battery icon turns solid when the product is fully charged. Only charge your ISOtunes AIR DEFENDER AM/ FM BT with a maximum 5 Volt charger. Using a charger higher than 5 Volts could be dangerous and may damage the product. Be careful with “quick charge” or “turbo charge” chargers, which often supply 9, 12, or 15 Volts. ISOtunes AIR DEFENDER AM/FM BT should not be charged at voltage levels above 5 volts. American National Standards Institute (ANSI) S3.19-1974 The level of noise entering a person’s ear, when ISOtunes AIR DEFENDER AM/FM BT is worn as directed, is closely approximated by the difference between the A-weighted environmental noise level and the Noise Reduction Rating (NRR). Improper fit of this device will reduce its effectiveness in attenuating noise. Consult the enclosed instructions for proper fitting. ISOtunes AIR DEFENDER AM/FM BT should not be used if a proper fit is not achieved or maintained. A1: Frequency (Hz) A2: Mean Attenuation (dB) A3: Standard Deviation (dB) Example: 1. The surrounding noise level measured at the ear is 100 dB. 2. The NRR of ISOtunes AIR DEFENDER AM/ FM BT is 25 dB. 3. The noise level entering the ear is approximately equal to 75 dB. Please note that the NRR is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulsive noise, such as gunfire. SafeMax™ Technology This hearing protector incorporates SafeMax™ Technology; therefore, its volume output is limited to 85 decibels (IT-92). Cleaning and Maintenance TRILOGY™ foam ear cushions should be regularly inspected for deterioration, cracking, or other damage. TRILOGY™ cushions are disposable and should be replaced over time. We recommend replacing your ear cushions every one to three months or when they become damaged. Additional AIR DEFENDER AM/FM BT ear cushions are available at ISOtunes.com. Ear cushions can be cleaned in between uses with a damp cloth and water. • Clean your product by gently wiping them with a clean, damp cloth with mild soap. • Do not immerse the product in water. • Do not use abrasive cleaning solvents to clean the product. • If the products get wet from sweat or rain, please discontinue use, and allow them to dry. WARNINGS ISOtunes hearing protectors do an excellent job of blocking outside noise. As such, they should NOT be used in environments where users need to be fully aware of their surroundings for personal safety reasons. For example, do NOT use them while driving a car or riding a mot…

Text truncated - open the document above for the full version.

Haven Technologies, Inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 23, 2023 FCC ID: 2AJRDIT-92 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Haven Technologies, Inc certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Haven Technologies, Inc certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Haven Technologies, Inc Address: 873 W. Carmel Drive, Carmel, IN 46032 USA Contact Person: Austin Chen Tel.: (317) 490-7197 Email: [email protected] Sincerely,

HavenTechnologies,Inc Address：873W.CarmelDrive,Carmel,IN46032USA FRN:0032593220 Date:2023-12-29 FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(7)Filing SUBJECT:FCCApplicationforFCCID:2AJRDIT-92 HavenTechnologies,Inccertifiesthat,asofthedateofthefilingoftheapplication,Haven Technologies,IncisourdesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID.HavenTechnologies,Incacceptstomaintainanagentfornolessthanoneyearafter thegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. HavenTechnologies,Incaccepts,asofthedateofthefilingoftheapplication,theobligationof thedesignatedU.S.agentforserviceofprocessforrepresentativeonbehalfoftheApplicant notedbelowforallfutureFCCIDcertification. DesignatedU.S.AgentInformation: Name:HavenTechnologies,Inc Address: 873WCarmelDrive,Carmel,IN,46032USA FRN:0032593220 ContactPerson:AustinChen Tel.:(317)490-7197 Email:[email protected] Sincerely, SignedonbehalfofHavenTechnologies,IncSignedonbehalfofHavenTechnologies,Inc Name: AustinChen Name: AustinChen Title:SeniorProjectManagerTitle:SeniorProjectManager Date:2023-12-29Date:2023-12-29

Product specification Quick Reference Date Antenna type PCB Antenna * Frequency 2.45GHz 1 Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -2.3 (Input pwr – loss pwr) Peak EIRP(dBm) 1.3 Directivity (dBi) 1 (all direction antenna) Efficiency (dB) -2.3 (58.5%) Gain (dBi) 1.3 (Peak Gain XY-plane) Maximum Power (dBm) 1.3 (XY-plane) Minimum Power (dBm) -4(XY-plane) Avg. Power (dBm) -0.5(XY-plane) Max/Min Ratio (dB) 5.3(XY-plane) Max/Avg Ratio (dB) 1.8(XY-plane) Min/Avg Ratio (dB) -3.5(XY-plane) Average Gain (dB) -0.5 (Avg Gain XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna layout on the Module board Antenna Gain Gain Table Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Jiangxi Jinhong Electronics Co., LTD Xintonglian Science and Technology Industrial Park, East of Suichuan Industrial Park, Ji 'an City, Jiangxi Province Module board 1.3 1.-0.48 1-3.83 1.11 -2.9958.5% Return Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram XY-plane XZ-plane YZ-plane

Haven Technologies, Inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 12, 2023 Subject; Request for Confidentiality FCC ID: 2AJRDIT-92 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Austin Chen Title: Senior Project Manager

HavenTechnologies,Inc ModelConfirmationLetter We,HavenTechnologies,Inccertifytheproduct: BluetoothAM/FMRadioHeadphones ModelNo.:IT-92,AIRDEFENDERAM/FMBT Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringareidentical, Onlythecolorisdifferent. Signiture: GranteeContact:AustinChen CompanyName:HavenTechnologies,Inc Date:December29,2023

QAI LABORATORIES U.S.A: 888.540.4024 CANADA: 877.461.8378 LOCATIONS: WWW.QAI.ORG/LOCATIONS Effective Date: October 26, 2005 QSF 7.1-4 - Listing Agreement Page 1 of 5 Revision Date: June 2, 2022 Revision 17 QAI LISTING AGREEMENT This agreement does not constitute permission to label products with the QAI logo. Permission to label products with the QAI logo is only provided by means of a listing letter signed by the president or the president’s designate. The QAI listing agreement outlines the terms of the listing and the obligations of QAI and the Listee. THIS AGREEMENT will be effective per the last dated signature on page 5 of this document. BETWEEN: QAI LABORATORIES LTD., a company incorporated under the laws of the Province of British Columbia and having an office at 3980 North Fraser Way, Burnaby, BC, V5J 5K5 ("QAI") OF THE FIRST PART AND (Austin Chen) OF THE SECOND PART WHEREAS: A. QAI provides listing and other services for various products, constructions, assemblies, designs, facilities and companies ("Products") to determine if these Products meet established codes and standards used by QAI; B. QAI allows for the use of its listing Logo, mark(s), or Code Evaluation Report number (“Marks”) on these; and C. The Listee has applied to QAI for a listing of its Products, only those described in the QAI Listing or Evaluation Report(s) will be eligible for the right to use labels or other designated Marks on these Products. NOW THEREFORE in consideration of their mutual obligations, the parties agree as follows: 1. QAI agrees as follows: a) to carry out an initial inspection of the Products by documenting materials and methods of construction of Listee and to assess the Listee's capabilities relevant to maintaining minimum acceptable levels of quality for the applicable established standards for the Products; b) upon the Listee's request and successful completion of the inspection by QAI, to provide approval to the Listee to produce labels or other means to display QAI's logo and to allow the Listee to attach the QAI logo to the Products; c) to notify Listee of any deviation or variance in the Products from the requirements used by QAI; d) to treat all information related to Listee's plant, facilities and manufacturing procedures as strictly confidential, unless authorized by the Listee. e) to make available upon Listee’s request, procedures in the event of a requirement for corrective action or in the event of an appeal, dispute, or complaint proceeding. QAI LABORATORIES U.S.A: 888.540.4024 CANADA: 877.461.8378 LOCATIONS: WWW.QAI.ORG/LOCATIONS Effective Date: October 26, 2005 QSF 7.1-4 - Listing Agreement Page 2 of 5 Revision Date: June 2, 2022 Revision 17 2. The Listee agrees as follows: a) to always comply with the relevant provisions of the listing program and this agreement b) to provide QAI with all relevant specifications or other appropriate documentation related to its Products. QAI shall be the sole judge of what documentation is relevant. Any changes in required documentation shall require the prior written approval of QAI; c) to use and display QAI's logo as approved by QAI. Labels shall be printed to QAI's specifications by QAI approved printers; d) to designate a responsible person or persons to control security with respect to Labels or Marks and maintain records of each of the Products to which the Labels or Marks have been affixed and to provide QAI with access to these records during normal business hours; e) that its equipment, plant, facilities and procedures shall conform with the requirements of the relevant Factory Audit Manual and Quality Manuals, or as otherwise may be specified in writing from time to time by QAI; f) to provide unhindered plant access to QAI representatives and representatives of applicable accreditation organisations during normal business hours, this may be in person or virtually by the use of teleconferencing or other technology that allows QAI to verify the manufacturer continues to comply with this agreement; g) to furnish samples of the Products as may be required by QAI for follow-up inspections; h) to make claims regarding listing only in respect of the scope for which listing has been granted. i) that Labels or Marks shall be affixed only to the Products which have been evaluated by QAI and qualified for listing. The client agrees to produce products in compliance with the applicable evaluation report. Any other use of the QAI name or listing mark will require the prior approval of QAI; j) the client agrees to label products in the manufacturing locations shown in the evaluation report, and that they will not distribute labels to any other person or body without the written permission of QAI; that Labels or Marks shall be applied to the Products at the place of manufacture, by Listee or designate, unless otherwise approved in writing by QAI; k) that where Regulatory Authorities request specific listing or evaluation reports and other data, Listee will not unreasonably withhold consent to QAI to release such information; l) that title to and right of control of Labels or Marks shall be vested in QAI until properly applied to the Products in accordance with this Agreement, and that QAI has granted to Listee a non-exclusive License to use its listing mark in accordance with this Agreement; m) to pay to QAI for any or all fees stipulated in a separate document and revised from time to time. These fees include, but are not limited to, Listing Fees, Inspection Fees , Annual Dues, and Additional Engineering time; n) that any deviation or variance in its Products from the standards used by QAI shall allow QAI at its option and, if necessary, at Listee's expense, to initiate action as it considers necessary, including but not limited to, withdrawal of the supply of Labels, removal of Labels or Marks from non-confirming products, removal of Listee's Products from the published Listings and notification of regulatory bodies, authorities having jur…

Text truncated - open the document above for the full version.

Externalphotos

Size:30*15mm BluetoothAM/FMRadioHeadphones FCCID:2AJRDIT-92 IC:29416-IT92

Internalphotos ANT

ShenzhenHuaxiaTestingTechnologyCo.,Ltd 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport ReportNo.:CQASZ20231101970E-02 Applicant: HavenTechnologies,Inc. AddressofApplicant: 873W.CarmelDrive,Carmel,IN46032USA EquipmentUnderTest(EUT): EUTName:BluetoothAM/FMRadioHeadphones ModelNo.:IT-92,AIRDEFENDERAM/FMBT TestModelNo.:IT-92 BrandName:ISOtunes,ISOtunesSport FCCID:2AJRDIT-92 Standards: 47CFRPart1.1307 47CFRPart2.1093 KDB447498D04InterimGeneralRFExposureGuidancev01 DateofReceipt:2023-11-01 DateofTest:2023-11-01to2023-11-13 DateofIssue:2023-12-25 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-02 Page: 2 of7 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20231101970E-02Rev.01 Initialreport 2023-12-25 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-02 Page: 3 of7 2Contents Page 1VERSION.............................................................................................................................................................................2 2CONTENTS.........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION....................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT....................................................................................................................................4 3.3GENERALDESCRIPTIONOFBT......................................................................................................................................4 4SAREVALUATION...........................................................................................................................................................5 4.1RFEXPOSURECOMPLIANCEREQUIREMENT..................................................................................................................5 4.1.1StandardRequirement......................................................................................................................................5 4.1.2Limits....................................................................................................................................................................5 4.1.3EUTRFExposure..............................................................................................................................................7 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-02 Page: 4 of7 3GeneralInformation 3.1ClientInformation Applicant: HavenTechnologies,Inc. AddressofApplicant: 873W.CarmelDrive,Carmel,IN46032USA Manufacturer: HavenTechnologies,Inc. AddressofManufacturer: 873W.CarmelDrive,Carmel,IN46032USA Factory: HangzhouZHTechCo.,Ltd. AddressofFactory: ShunleRoadNo6,Jingshan,YuhangDistrict,Hangzhou,Zhejiang 3.2GeneralDescriptionofEUT ProductName: BluetoothAM/FMRadioHeadphones ModelNo.: IT-92,AIRDEFENDERAM/FMBT TestModelNo.: IT-92 TradeMark: ISOtunes,ISOtunesSport SoftwareVersion: 2286C_v1.0 HardwareVersion: ZH2286_v1.03 PowerSupply: Li-ionbatteryDC3.8V2000mAh,ChargebyDC5Vforadapter 3.3GeneralDescriptionofBT OperationFrequency:2402MHz~2480MHz ModulationType:GFSK,π/4DQPSK TransferRate:1Mbps/2Mbps NumberofChannel:79 ProductType:MobilePortable AntennaType: PCBantenna AntennaGain: 1.3dBi ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-02 Page: 5 of7 4SAREvaluation 4.1RFExposureComplianceRequirement 4.1.1StandardRequirement 447498D04InterimGeneralRFExposureGuidancev01 3.2.SARTestReductionGuidance SARtestreductionprocedures[Glossary]allowusingaparticularsetoftestdataasrepresentative ofother,similar,testconditions.Thismaybeappliedfordatawithindifferenttestpositions(e.g.body, head,extremity),wirelessmodes(e.g.Wi-Fi,cellular),andfrequencybands.Thistestreductionprocess providesfortheuseoftestdataforonespecificchannel,whilereferencingtothosedatafordemonstrating complianceinotherrequiredchannelsforeachtestpositionofanexposurecondition,withintheoperating modeofafrequencyband.Thisislimitedspecificallytowhenthereported1-gor10-gSARforthemid- bandorhighestoutputpowerchannelmeetsanyofthefollowingconditions. 4.1.2Limits SAR-basedthresholdsarederivedbasedonfrequency,power,andseparationdistanceoftheRF source.Theformuladefinesthethresholdsingeneralforeitheravailablemaximumtimeaveragedpoweror maximumtime-averagedERP,whicheverisgreater. IftheERPofadeviceisnoteasilydetermined,suchasforaportabledevicewithasmallform factor,theapplicantmayusetheavailablemaximumtime-averagedpowerexclusivelyifthe deviceantennaorradiatingstructuredoesnotexceedanelectricallengthofλ/4. Asfordeviceswithantennasoflengthgreaterthanλ/4wherethegainisnotwelldefined,but alwayslessthanthatofahalf-wavedipole(lengthλ/2),theavailablemaximumtime-averaged powergeneratedbythedevicemaybeusedinplaceofthemaximumtime-averagedERP,where thatvalueisnotknown. Theseparationdistanceisthesmallestdistancefromanypartoftheantennaorradiating structureforallpersons,du…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport ReportNo.:CQASZ20231101970E-01 Applicant: HavenTechnologies,Inc. AddressofApplicant: 873W.CarmelDrive,Carmel,IN46032USA EquipmentUnderTest(EUT): Product: BluetoothAM/FMRadioHeadphones ModelNo.: IT-92,AIRDEFENDERAM/FMBT TestModelNo.:IT-92 BrandName: ISOtunes,ISOtunesSport FCCID: 2AJRDIT-92 Standards:47CFRPart15,SubpartC DateofReceipt:2023-11-01 DateofTest:2023-11-01to2023-11-13 DateofIssue:2023-12-25 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlyto thesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. TestedBy: (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 Page: 2 of73 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20231101970E-01Rev.01 Initialreport 2023-12-25 Page: 3 of73 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement47CFRPart15.203/PASS ACPowerLineConducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.10-2013PASS ConductedPeakOutput Power 47CFRPart15.247ANSIC63.10-2013PASS 20dBOccupiedBandwidth47CFRPart15.247ANSIC63.10-2013PASS CarrierFrequencies Separation 47CFRPart15.247ANSIC63.10-2013PASS HoppingChannelNumber47CFRPart15.247ANSIC63.10-2013PASS DwellTime47CFRPart15.247ANSIC63.10-2013PASS PseudorandomFrequency HoppingSequence 47CFRPart15.247ANSIC63.10-2013PASS Band-edgeforRF ConductedEmissions 47CFRPart15.247ANSIC63.10-2013PASS RFConductedSpurious Emissions 47CFRPart15.247ANSIC63.10-2013PASS RadiatedSpurious emissions 47CFRPart15.209ANSIC63.10-2013PASS Restrictedbandsaround fundamentalfrequency (RadiatedEmission) 47CFRPart15.205/15.209ANSIC63.10-2013PASS Remark: Thetestedsample(s)andthesampleinformationareprovidedbytheclient. Tx:InthiswholereportTx(ortx)meansTransmitter. Rx:InthiswholereportRx(orrx)meansReceiver. RF:InthiswholereportRFmeansRadiatedFrequency. CH:InthiswholereportCHmeanschannel. Volt:InthiswholereportVoltmeansVoltage. Temp:InthiswholereportTempmeansTemperature. Humid:InthiswholereportHumidmeanshumidity. Press:InthiswholereportPressmeansPressure. N/A:Inthiswholereportnotapplication Page: 4 of73 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3A DDITIONAL I NSTRUCTIONS ........................................................................................................................................7 4.4T EST E NVIRONMENT ....................................................................................................................................................8 4.5D ESCRIPTIONOF S UPPORT U NITS ................................................................................................................................8 4.6S TATEMENTOFTHEMEASUREMENTUNCERTAINTY ....................................................................................................9 4.7T EST L OCATION .........................................................................................................................................................10 4.8T EST F ACILITY ...........................................................................................................................................................10 4.9A BNORMALITIESFROM S TANDARD C ONDITIONS ......................................................................................................10 4.10O THER I NFORMATION R EQUESTEDBYTHE C USTOMER ..........................................................................................10 4.11E QUIPMENT L IST ......................................................................................................................................................11 5TESTRESULTSANDMEASUREMENTDATA......................................................................................................12 5.1A NTENNA R EQUIREMENT ..........................................................................................................................................12 5.2C ONDUCTED E MISSIONS ............................................................................................................................................13 5.3C ONDUCTED P EAK O UTPUT P OWER ..........................................................................................................................17 5.420 D BO CCUPIED B ANDWIDTH ...................................................................................................................................22 5.5C ARRIER F REQUENCIES …

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 Page: 71 of73 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 Page: 72 of73 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20231101970E-01 Page: 73 of73 ***ENDOFREPORT***

4Photographs-EUTTestSetup 4.1RadiatedEmission 9KHz~30MHz: 30MHz~1GHz: Above1GHz: 4.2ConductedEmissio