2AL8S-0235CBQKFast Lane Guard

Swing Speed Gate Quick Guide V1.00 Contents Preface .................................................................................................................. 1 Legal Statement ..................................................................................................... 2 Safety Precautions ................................................................................................. 4 1. Packing List ................................................................................................... 8 2. Introduction .................................................................................................. 9 2.1.1 Whole Unit ...................................................................................... 9 2.1.2 Control Board ................................................................................ 10 2.1.3 Access Control Board ..................................................................... 13 3. Device Installation ....................................................................................... 14 3.1 Installation Preparation ......................................................................... 15 3.2 Install Barriers........................................................................................ 16 3.3 Secure the Gate ..................................................................................... 19 3.4 Wiring.................................................................................................... 20 4. Startup ........................................................................................................ 24 5. Web Login ................................................................................................... 25 6. Remote Control Operations ......................................................................... 25 6.1 Remote Control Pairing .......................................................................... 25 6.2 Restore Factory Defaults ......................................................................... 26 1 Preface The content of this section is designed to ensure that users use the product correctly to prevent dangers or property loss caused by improper operation. Before using this product, be sure to read this manual carefully. Please keep this manual properly for future reference. About This Manual ⚫ We recommend that you use this manual under the guidance of a professional. ⚫ This manual is designed for use with multiple product models, and it is not possible to list the appearance and functions of each product individually. Please refer to the actual product for use. ⚫ This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software. ⚫ Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot be held responsible for any such errors and reserves the right to change the manual without prior notice. ⚫ Users are fully responsible for the damages and losses that arise due to improper operation. ⚫ Uniview reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated. ⚫ This manual will be updated in real time according to the laws and regulations of the relevant regions. For specific details, please refer to the product's paper copy, QR code, or official website. In case of any discrepancy between the paper copy and the electronic version, the electronic version shall prevail. About This Product If the product you have chosen is a video product, please strictly adhere to the applicable laws and regulations. You can visit our official website to inquire about the relevant content. Instructions for Use ⚫ This document serves as a guide for use only. All statements, information, and suggestions contained in this document do not constitute any express or implied warranty. ⚫ We assume no responsibility for any special, incidental, consequential, or indirect damages resulting from the use of this manual or the use of our products, including but not limited to losses due to loss of business profits, data or document loss, and product malfunction or information leakage caused by cyber-attack, hacker attack, and virus infections. ⚫ Due to uncertain factors such as the physical environment, there may be discrepancies between the actual values of some data and the reference values provided in the manual. In case of any questions or disputes, the company's final interpretation shall prevail. Formatting Conventions The UI formatting conventions used in this document are as follows: 2 Format Meaning Bold Bold means UI elements (button names, menu names, window names, etc.), e.g., Click Save. > Indicate a sequence of actions, e.g., click Device Management > Add Device, which means first click Device Management, and then click Add Device. Symbol Conventions This document uses various distinctive symbols to highlight areas that require special attention during the operation process. The meanings of these symbols are as follows: Symbol Meaning NOTE: Provides tips and additional information related to the operation and use of the product. CAUTION: Alerts to matters that requires attention during operation, as improper handling may lead to product damage, data loss, or functional abnormalities. WARNING: The annotations following this symbol demand extra attention, as improper handling could potentially cause personal injury. Legal Statement Copyright Statement © 2025-2026 Zhejiang Uniview Technologies., Co., Ltd. All rights reserved. All parts of this document, including but not limited to text, images, and graphics, are copyrighted and belong to Zhejiang Uniview Technologies Co., Ltd (hereinafter referred to as “Uniview” "we" “us”). Without our written permission, no…

Text truncated - open the document above for the full version.

ZheJiang Uniview Technologies Co.,Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicantnoted below. U.S. Agent Signature: Date: 2026-02-07 Signed by (Printed Name/Title): David Wu/ CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: ZheJiang Uniview Technologies Co.,Ltd. Grantee Code: 2AL8S FRN: 0026550475 FCC ID: 2AL8S-0235CBQK Contact Name: Feng Xu Street Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District City/Province/Zip: Hangzhou City, Zhejiang Province, 310051, China Telephone No: 18106582562 Email: [email protected] Applicant Signature: Date: 2026-02-07 Signed by (Printed Name/Title): Feng Xu, Manager

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name ZheJiang Uniview Technologies Co.,Ltd. Address No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China FRN 0026550475 Grantee Code 2AL8S FCC ID: 2AL8S-0235CBQK Authorized Contact Name Feng Xu Contact Phone 18106582562 Contact Email [email protected] ZheJiang Uniview Technologies Co.,Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2026-02-07 Print Name: Feng Xu Title: Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name ZheJiang Uniview Technologies Co.,Ltd. Address No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China FRN 0026550475 Grantee Code 2AL8S FCC ID: 2AL8S-0235CBQK Authorized Contact Name Feng Xu Contact Phone 18106582562 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date:2026/02/07 Print Name: Feng Xu Title: Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

ZheJiang Uniview Technologies Co.,Ltd. Current Date 2026-02-07 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE ZheJiang Uniview Technologies Co.,Ltd., HEREBY DECLARED THAT Product Description: Fast Lane Guard Model No.: OFG8501N Subcategory:L,OFG8501N-xxxxxxxx-yyyyyyyy-zzz, (“x”,”y”,”z” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@R,OFG8501N Subcategory:R, OFG8501N-rrrrrrrr-ssssssss-ttt, (“r”,”s”,”t” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@M, OFG8501N Subcategory:M, OFG8501N-mmmmmmmm-nnnnnnnn-ooo, (“m”,”n”,”o” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank) Manufacturer’s Name: ZheJiang Uniview Technologies Co.,Ltd. Manufacturer’s Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China *Except that the model number and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical with the model which has been tested by SGS. Model No.: OFG8501N@L Manufacturer’s Name: ZheJiang Uniview Technologies Co.,Ltd. Manufacturer’s Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Sincerely, Signature: Printed Name : Feng Xu Position/Title : Manager Contact Number: 18106582562

ZheJiang Uniview Technologies Co.,Ltd. Date: 2026-02-07 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AL8S-0235CBQK To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with ZheJiang Uniview Technologies Co.,Ltd.. This authorization is valid until further written notice from the applicant. Name (Printed): Feng Xu Title: Certification Engineer Signature: On behalf of Company: ZheJiang Uniview Technologies Co.,Ltd. Telephone: 18106582562

ZheJiang Uniview Technologies Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Regarding: Confidentiality Request regarding application for FCC ID: 2AL8S-0235CBQK LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Feng Xu Title: Certification Engineer Company Name: ZheJiang Uniview Technologies Co.,Ltd.

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 External Photos for KSCR2512002777AT Test Model No.: OFG8501N@L, OFG8501N@R, OFG8501N@M Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4 - End of the Appendix -

Page 1 of 1 Label Location

Compliance Certification Services (Kunshan) Inc. Page: 1 of 6 Internal Photos for KSCR2512002777AT Test Model No.: OFG8501N@L, OFG8501N@R, OFG8501N@M Compliance Certification Services (Kunshan) Inc. Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Page: 6 of 6 - End of the Appendix -

Report No.: KSCR251200277704 Page: 1 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2512002777AT FCC ID: 2AL8S-0235CBQK Applicant: Zhejiang Uniview Technologies Co., Ltd. Address of Applicant: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Manufacturer: Zhejiang Uniview Technologies Co., Ltd. Address of Manufacturer: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Equipment Under Test (EUT): EUT Name: Fast Lane Guard Model No.: OFG8501N@L, OFG8501N Subcategory:L,OFG8501N-xxxxxxxx- yyyyyyyy-zzz, (“x”,”y”,”z” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@R, OFG8501N Subcategory:R,OFG8501N-rrrrrrrr- ssssssss-ttt, (“r”,”s”,”t” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@M, OFG8501N Subcategory:M,OFG8501N- mmmmmmmm-nnnnnnnn-ooo, (“m”,”n”,”o” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank) Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-12-18 Date of Test: 2025-12-30 to 2026-01-13 Date of Issue: 2026-01-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR251200277704 Page: 2 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-01-22 / Authorized for issue by: Tested By Maker Qi /Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR251200277704 Page: 3 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Technical Specifications ............................................................................................................. 4 3.3 Separation Distance ................................................................................................................... 5 3.4 Test Location ............................................................................................................................ 6 3.5 Test Facility ............................................................................................................................... 6 4 RF Exposure Test Exemptions ........................................................................................................ 7 4.1 FCC RF Exposure Test Exemptions for single RF sources ....................................................... 7 4.2 RF Exposure Test Exemptions for Simultaneous Transmission ................................................ 9 5 asurement and Calculation ............................................................................................................ 11 5.1 Maximum transmit power ......................................................................................................... 11 5.2 RF Exposure Calculation ......................................................................................................... 12 Report No.: KSCR251200277704 Page: 4 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 General Information 3.1 General Description of E.U.T. Power supply: AC 100-240V,50/60Hz,5.5A; 24Vdc,3.25A 3.2 Technical Specifications 2.4GHz WiFi Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (DBPSK, DQPSK, CCK); 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM) Number of Channels: 802.11b/g/n(HT20):11 Channel Spacing: 5MHz Antenna Type: FPC antenna Antenna Gain: 3.8dBi (Provided by the manufacturer) BT Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: FPC antenna Antenna Gain: 3.8dBi (Provided by the manufacturer) BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC antenna Antenna Gain: 3.8dBi (Provided by the manufacturer) Report No.: KSCR251200277704 Page: 5 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.3 Separation Distance Separation distance between the antenna to person (R): ＞20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. Report No.: KSCR251200277704 Page: 6 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc.…

Text truncated - open the document above for the full version.

规格承认书 SPECIFICATION FOR APPROVAL 日期 Date 2025/11/28 编号 File No 25112801 版本 Revision 1.0 客户 CUSTOMER: 宇视 客户料号 CUSTOMER NO: 8601闸机增加权限控制板 品名 PARTNAME: WiFi&BTAntenna 供方料号 SUPPLIERNO: YJH01.059.041.302A 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 SUPPLIERNO: YJH01.059.041.302A 送样日期Date: 送样数量Q'TY: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN ChenGuoqiangZhangLiqunChenXingyi YJ-RD-F04-A 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 2 承认书项目表（ Spec Item ） 12 3 工程成品图（ Drawing） 13 4 包装图（ Package Drawing） 14 5 天线规格（Antenna Specification） 15 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 5 天线规格（Antenna Specification） 15 6 S参数测试（S Parameter ） 26 ~ 7 7 无源测试（Passive Test ） 38 ~ 10 8 方向图（Radiation Pattern ） 411 ~ 14 9 天线装配图（Antenna Profile） 215 ~ 16 10 材质证明（Material Certificate ） 4217 ~ 58 11 RoHS报告（RoHSTest Report ） **** 12--- 13--- DC 6 R E V . E 4 5 3 2 1 CDE 7 8 D E S C R I P T I O N D A T E B B A 8 6 7 5 4 A 1 2 3 A 首 次 发 行 2 0 2 5 - 1 0 - 2 8 P A R T N A M E : X . X X X . X X ° ± 3 ° ± 0 . 5 0 ± 0 . 1 5 P A R T N O . : P A R T N O M a t e r i a l P a r t N u m b e r C O A 1 0 0 0 1 A . P 0 1 H 0 1 . 0 5 9 . 0 4 1 . F P C 0 2 0 1 A T E R 1 0 0 0 1 A . P 0 1 W i F i & B T A n t e n n a Y J H 0 1 . 0 5 9 . 0 4 1 . 3 0 2 A 4 0 . 0 26.0 1 5 5 . 0 ± 3 . 0 DC 6 R E V . E 4 5 3 2 1 CDE 7 8 D E S C R I P T I O N D A T E B B A 8 6 7 5 4 A 1 2 3 A 首 次 发 行 2 0 2 5 - 1 0 - 2 8 P A R T N A M E : X . X X X . X X ° ± 3 ° ± 0 . 5 0 ± 0 . 1 5 P A R T N O . : Y J H 0 1 . 0 5 9 . 0 4 1 . 3 0 2 A W i F i & B T A n t e n n a 包 装 说 明 环 保 标 签 R o H S 备 注 : 天 线 交 货 袋 装 及 箱 装 尺 寸 根 据 实 际 出 货 数 量 进 行 调 整 。 单 天 线 成 品 重 量 ： 1 . 0 g 5 0 0 0 P C S 天 线 成 品 箱 装 估 重 ： 5 . 7 k g 3 5 0 2 2 0 285 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz Impedance50 Ohm Nominal V.S.W.R 2.0 Max Gain WiFi&BT-1: 3.8 dBi WiFi&BT-2: 3.7 dBi RadiationOmni-directional 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 PolarizationLinear Physical Properties Connector 1代IPEX Cable TypeO.D.1.13mm Cable Length155mm Cable ColorBlack Operating Temp -20~+70°C Storage Temp -20~+70°C Agilent E5071C S Antenna Performance Test 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 S Parameter Test // WiFi&BT Antenna-1 Agilent E5071C S 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 S Parameter Test // WiFi&BT Antenna-2 Antenna Passive Test Z Y 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 X Y X Z Passive Test For WiFi&BTAntenna-1 Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 2400 25.5-5.93.5 2410 26.3-5.83.1 2420 27.3-5.63.2 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 2430 28.7-5.43.8 2440 28.9-5.43.7 2450 28.4-5.53.5 2460 27.8-5.63.5 2470 26.6-5.73.5 2480 26.8-5.73.5 2490 25.8-5.93.7 2500 24.2-6.23.6 Passive Test For WiFi&BTAntenna-2 Freq (MHz) Effi (%) Effi (dB) Gain (dBi) 2400 27.2-5.73.2 2410 28.9-5.43.1 2420 28.4-5.53.4 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 2430 27.6-5.63.2 2440 26.8-5.73.3 2450 24.9-6.02.8 2460 24.2-6.23.1 2470 24.5-6.13.5 2480 27.6-5.63.6 2490 30.2-5.23.7 2500 29.8-5.33.5 Radiation Pattern For WiFi&BTAntenna-1 （ 2450MHz ） 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi&BTAntenna-2 （ 2450MHz ） 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 Radiation Pattern For WiFi&BTAntenna-1 Phi 0° 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 Phi 90° Theta 90° Radiation Pattern For WiFi&BTAntenna-2 Phi 0° 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 Phi 90° Theta 90° 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086 Device WiFi&BTAnt 东莞市长安镇沙头社区木鱼路59号Tel:0769-82586086 Fax:0769-82586086

Report No.: KSCR251200277703 Page: 1 of 94 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSCR2512002777AT FCC ID: 2AL8S-0235CBQK Applicant: Zhejiang Uniview Technologies Co., Ltd. Address of Applicant: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Manufacturer: Zhejiang Uniview Technologies Co., Ltd. Address of Manufacturer: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China Equipment Under Test (EUT): EUT Name: Fast Lane Guard Model No.: OFG8501N@L, OFG8501N Subcategory:L,OFG8501N-xxxxxxxx- yyyyyyyy-zzz, (“x”,”y”,”z” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@R, OFG8501N Subcategory:R,OFG8501N-rrrrrrrr-ssssssss- ttt, (“r”,”s”,”t” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank); OFG8501N@M, OFG8501N Subcategory:M,OFG8501N-mmmmmmmm- nnnnnnnn-ooo, (“m”,”n”,”o” can be 0-9,A-Z,a-z z,@ or blank;”-” may be blank)   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-12-18 Date of Test: 2025-12-30 to 2026-01-13 Date of Issue: 2026-01-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR251200277703 Page: 2 of 94 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-01-22 / Authorized for issue by: Tested By Maker_Qi/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR251200277703 Page: 3 of 94 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Customer Declaration Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Customer Declaration Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 1…

Text truncated - open the document above for the full version.