2AL8S-0235CBVNMain Station

Video Intercom Main Station Quick Guide V1.00 1 Preface The content of this section is designed to ensure that users use the product correctly to prevent dangers or property loss caused by improper operation. Before using this product, be sure to read this manual carefully. Please keep this manual properly for future reference. About This Manual  We recommend that you use this manual under the guidance of a professional.  This manual is designed for use with multiple product models, and it is not possible to list the appearance and functions of each product individually. Please refer to the actual product for use.  This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.  Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.  Users are fully responsible for the damages and losses that arise due to improper operation.  Uniview reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated.  This manual will be updated in real time according to the laws and regulations of the relevant regions. For specific details, please refer to the product's paper copy, QR code, or official website. In case of any discrepancy between the paper copy and the electronic version, the electronic version shall prevail. About This Product If the product you have chosen is a video product, please strictly adhere to the applicable laws and regulations. You can visit our official website to inquire about the relevant content. Instructions for Use  This document serves as a guide for use only. All statements, information, and suggestions contained in this document do not constitute any express or implied warranty.  We assume no responsibility for any special, incidental, consequential, or indirect damages resulting from the use of this manual or the use of our products, including but not limited to losses due to loss of business profits, data or document loss, and product malfunction or information leakage caused by cyber-attack, hacker attack, and virus infections.  Due to uncertain factors such as the physical environment, there may be discrepancies between the actual values of some data and the reference values provided in the manual. In case of any questions or disputes, the company's final interpretation shall prevail. Formatting Conventions The UI formatting conventions used in this document are as follows: Format Meaning Bold Bold means UI elements (button names, menu names, window names, etc.), e.g., Click Save. > Indicate a sequence of actions, e.g., click Device Management > Add Device, which means first click Device Management, and then click Add Device. Symbol Conventions This document uses various distinctive symbols to highlight areas that require special attention during the operation process. The meanings of these symbols are as follows: 2 Symbol Meaning NOTE: Provides tips and additional information related to the operation and use of the product. CAUTION: Alerts to matters that requires attention during operation, as improper handling may lead to product damage, data loss, or functional abnormalities. WARNING: The annotations following this symbol demand extra attention, as improper handling could potentially cause personal injury. Legal Statement Copyright Statement ©2026 Zhejiang Uniview Technologies., Co., Ltd. All rights reserved. All parts of this document, including but not limited to text, images, and graphics, are copyrighted and belong to Zhejiang Uniview Technologies Co., Ltd (hereinafter referred to as “Uniview” "we" “us”). Without our written permission, no organization or individual may excerpt, copy, translate, modify, or disseminate any part or all of the content of this manual in any form. The products described in this manual may contain software copyrighted by us and any potential licensors. Without the permission of the relevant rights holders, no one may copy, distribute, modify, excerpt, decompile, disassemble, decrypt, reverse engineer, rent, transfer, sublicense, or engage in any other actions that infringe upon the software copyright in any form. Trademark Acknowledgements are trademarks or registered trademarks of Uniview. All other trademarks, products, services and companies in this manual or the product described in this manual are the property of their respective owners. Export Compliance Statement Uniview complies with applicable export control laws and regulations worldwide, including that of the People's Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, Uniview asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide. EU Authorised Representative UNV Technology EUROPE B.V. Treubstraa 1, 2288 EG, Rijswijk, Netherlands. If you have any feedback, please contact us at [email protected]. Disclaimer of Liability  We assume no responsibility and offer no compensation for any special, incidental, consequential, or indirect damages resulting from the use of this manual or our products, including but not limited to losses related to lost business profits, data, or document loss.  The product described in this manual is provided on an "as is" basis. Unless required by applicable law, this manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction w…

Text truncated - open the document above for the full version.

Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Apr. 10, 26 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: [2AL8S-0235CBVN] [Zhejiang Uniview Technologies Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [FCC US Agent, LLC] (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. [FCC US Agent, LLC] ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Signature: Contact Person: Tim Payne Tel: 708-571-3148 Email: [email protected] Applicant Company Name: Zhejiang Uniview Technologies Co., Ltd. FRN: 0026550475 Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Signature: Contact Person: Feng Xu Tel: 18106582562 Email: [email protected]

Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: April 10, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AL8S-0235CBVN Zhejiang Uniview Technologies Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Feng Xu Title: Manager Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Tel.: 18106582562 Email: [email protected]

Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 1 | P a g e 950Attestation Statements To: Federal Communications Commission Date: Apr. 10, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AL8S-0235CBVN Product Name: Main Station This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Feng Xu Title: Manager Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Tel.: 18106582562 Email: [email protected] Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Zhejiang Uniview Technologies Co., Ltd. Declaration Letter of Model Difference Date: 2026-04-02 FCC ID: 2AL8S-0235CBVN Tested Model Number: OEG-SA1T Adding Model Number(s): OEG-SA1T-xxxxxxxx-yyyyyyyy-zzz(“x”,”y”,”z” can be 0-9,A-Z,a-z z,:,@ or blank;”-” may be blank) All Adding Model Number(s) is/are same electrically identical as Tested Model Number. Only the model is different. Yours Sincerely, Applicant: Zhejiang Uniview Technologies Co., Ltd. Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Contact Person: Feng Xu Tel.: 18106582562 Email: [email protected] Sincerely, Signature:

Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 (April 10, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AL8S-0235CBVN Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description ⎯ Tune-Up Procedure / Parts List ⎯ SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES ⎯ (Etc.) The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos ⎯ External Photos ⎯ Test Setup Photos ⎯ (Etc.) Sincerely, (Signature). Title: Manager Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Tel.: 18106582562 Email: [email protected]

Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 (April 10, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AL8S-0235CBVN I, the undersigned, hereby authorize (Shenzhen LGT Test Service Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen LGT Test Service Co., Ltd.)shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Zhejiang Uniview Technologies Co., Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website) Feng Xu (Title) Manager Tel: 18106582562 Fax: +86 86509235 Email: [email protected]

Page 1 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 13 Photo 14 Page 8 of 8 Report No.: LGT26B022 Appendix - External Photographs of EUT Constructional Details Photo 15 Photo 16

Label

Page 1 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 1 Photo 2 Wi-Fi/BT ANT Page 2 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 13 Photo 14 Page 8 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 15 Photo 16 Page 9 of 9 Report No.: LGT26B022 Appendix - Internal Photographs of EUT Constructional Details Photo 17 Photo 18

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 8 EMF TEST REPORT Product Name: Main Station Model Number: OEG-SA1T, OEG-SA1T-xxxxxxxx-yyyyyyyy-zzz(“x”,”y”,”z” can be 0-9,A-Z,a-z z,:,@ or blank;”-” may be blank) FCC ID: 2AL8S-0235CBVN Issued For : Zhejiang Uniview Technologies Co., Ltd. No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26B022HA02 Sample Received Date: Feb. 04, 2026 Date of Test: Feb. 04, 2026 ~ Mar. 16, 2026 Date of Issue: Mar. 16, 2026 Report No.: LGT26B022HA02 Page 2 of 8 TEST REPORT CERTIFICATION Applicant: Zhejiang Uniview Technologies Co., Ltd. Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Manufacturer: Zhejiang Uniview Technologies Co., Ltd. Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China, 310051 Product Name: Main Station Trademark: unv Model Number: OEG-SA1T, OEG-SA1T-xxxxxxxx-yyyyyyyy-zzz(“x”,”y”,”z” can be 0- 9,A-Z,a-z z,:,@ or blank;”-” may be blank) Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR §2.1091 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT26B022HA02 Page 3 of 8 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 EUT OPERATION CONDITION 7 2.4 CLASSIFICATION 7 2.5 TEST RESULT 8 Report No.: LGT26B022HA02 Page 4 of 8 Revision History Rev. Issue Date Revisions 00 Mar. 16, 2026 Initial Issue Report No.: LGT26B022HA02 Page 5 of 8 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: Main Station Test Model Number: OEG-SA1T Series Number: OEG-SA1T-xxxxxxxx-yyyyyyyy-zzz(“x”,”y”,”z” can be 0-9,A-Z,a-z z,:,@ or blank;”-” may be blank) Model Difference: Only the model is different. Frequency Bands: Bluetooth 2402-2480MHz 2.4G WLAN IEEE 802.11b/g/n(20MHz): 2412~2462MHz IEEE 802.11n(40MHz):2422~2452MHz 5G WLAN IEEE 802.11a/n(HT20)/ac(VHT20): 5.180GHz- 5.240GHz IEEE 802.11n(HT40)/ac(VHT40): 5.190GHz-5.230GHz IEEE 802.11ac(VHT80): 5.210GHz IEEE 802.11a/n(HT20)/ac(VHT20): 5.260GHz-5.320GHz IEEE 802.11 n(HT40)/ac(VHT40): 5.270GHz-5.310GHz IEEE 802.11ac(VHT80): 5.290GHz IEEE 802.11a/n(HT20)/ac(VHT20): 5.500GHz-5.700GHz IEEE 802.11 n(HT40)/ac(VHT40): 5.510GHz-5.670GHz IEEE 802.11ac(VHT80): 5.530GHz-5.610GHz IEEE 802.11a/n(HT20)/ac(VHT20): 5.745GHz-5.825GHz IEEE 802.11a/n(HT40)/ac(VHT40): 5.755GHz-5.795GHz IEEE 802.11ac(VHT80): 5.775GHz Adapter: Input: AC 100-240V 50/60Hz 0.3A max Output: DC 5V 2A Rating: POE 48V 0.25A Hardware Version: N/A Software Version: N/A 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT26B022HA02 Page 6 of 8 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 0.3-3.0 614 1.63 *(100) 3.0-30 1842/f 4.89/f *(900/f 2 ) 30-300 61.4 0.163 1.0 300 - 1500 -- -- F/300 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 1.34-30 824/f 2.19/f *(180/f 2 ) 30-300 27.5 0.073 0.2 300 - 1500 -- -- F/1500 1500 – 100000 -- -- 1.0 F= Frequency in MHz * = Plane-wave equivalent power density. Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Report No.: LGT26B022HA02 Page 7 of 8 2.3 EUT OPERATION CONDITION EUT was enabled to transmit and receive at lowest, middle and highest channels. 2.4 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation …

Text truncated - open the document above for the full version.

东莞市一佳电子通讯科技有限公司 Dongguan YiJia Electronics Communication Technology Co.,Ltd. 规格承认书 SPECIFICATION FOR APPROVAL 日期 Date 2023/03/16 编号 File No 23031601 版本 Revision 1.0 客户 CUSTOMER: 客户料号 CUSTOMER NO: EADA100042A0 品名 WIFI/BT Antenna L 115mm MHF 品名 PART NAME: WIFI/BT Antenna L=115mm MHF 供方料号 SUPPLIER NO: YJL01.106.049.301A Date: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN add：东莞市长安镇沙头社区木鱼路59号元富工业区 Tel:0769-82586086 Fax :0769-82586086 APPROVALCHECKDESIGN ChenGuoqiangXieLiChenXingyi YJ-RD-F04-A add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone 承认书项目表 NO . 内容 （Contents） 页数 （Number of Page） 页码 （Page Code） 1 承认书封面（Spec Cover） 11 承认书封面（p） 2 承认书项目表（Spec Item ） 12 3 工程成品图（Drawing） 13 4 天线规格（Antenna Specification） 14 5 S参数测试（S Parameter ） 15 6 无源测试（Passive Test ） 36 ~ 8 7 方向图（Radiation Pattern ） 39 ~ 11 8 有源测试（Active Test ） 312 ~ 14 9 天线装配图（At P fil） 315 179 天线装配图（Antenna Profile） 315 ~ 17 10 材质证明（Material Certificate ） 2818 ~ 45 11 RoHS报告（RoHS Test Report ） **** add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 12N/AN/AN/A 13--- add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone 天线规格 Antenna Specification Electrical Properties Frequency 2.4-2.5GHz 5155 85GH qy 5.15-5.85GHz Impedance50 Ohm Nominal V.S.W.R2.0 Max 36dBi@24-25GHz Gain 3.6 [email protected] 2.7 [email protected] RadiationOmni-directional PolarizationLinear Physical Properties Connector IP EX Cable TypeO.D.1.13mm Cable Length115mm Cable ColorBlack add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 Operating Temp.-40 ~ +85 ̊C Storage Temp / Humidity 25±5 ̊C / <70% add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone AgilentAgilent E5071B SS Parameter Test // WiFi/BT Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone AntennaPassive TestAntenna Passive Te s t Z Y X X Z Y add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Passive Test For WiFi/BT Antenna （ 2.4G ） FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 61.2-2.13.5 2410 61.0-2.23.3 2420 61.2-2.13.2 2430 61.8-2.13.5 2440 61.2-2.13.4 2450 61.2-2.13.4 2460 59.7-2.23.5 2470 60.5-2.23.6 2480 59.0-2.33.4 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 2490 59.3-2.33.2 2500 57.8-2.43.0 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Passive Test For WiFi/BT Antenna (5.8G) FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5150 56.1-2.52.6 5200 58.1-2.42.7 5250 55 72525 5250 55.7-2.52.5 5300 54.0-2.72.1 5350 52.4-2.81.5 5400 55.6-2.61.8 5450 55.9-2.51.4 5500 50.9-2.91.2 5550 57.4-2.41.8 5600 56.0-2.51.8 5650 50.0-3.01.6 5700 53.0-2.82.0 5750 57 22427 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 5750 57.2-2.42.7 5800 48.4-3.22.1 5850 49.4-3.12.5 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Radiation Pattern For WIFI/BT Antenna 2400MHz 2450MHz 2500MHz add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone 5500MHz 5150MHz 5850MHz add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Phi 0° Phi 90° Theta 90° add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 eta90 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone AntennaActive TestAntenna Active Te s t Z Y X X Z Y add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Active Test For WIFI Antenna Band Channel Data Rate TRP EIRP Data Rate TIS EIS 1 13.6 20.2-85.8 -92.4 WIFI 2.4G 802.11b 11Mbps11Mbps6 14.7 21.0-85.0 -93.0 11 14 921 1-85 3-93 6 11 14.921.1-85.3-93.6 149 14.3 20.7-73.6 -81.5 WIFI 5G 802.11a 6Mbps54Mbps157 14.2 21.7-74.1 -80.5 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 165 14.7 21.5 -74.2 -81.6 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone Active Test For BT Antenna Band Channel TRP EIRPTISEIS 0 3.99.4-85.8 -91.2 BT39 4.49.3-86.7 -92.7 78 4599-86 9-92 3 add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 4.59.986.992.3 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone DeviceDevice add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone WiFi/BT Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone WiFi/BT Antenna add：东莞市长安镇沙头社区木鱼路59号元富工业区Tel:0769-82586086 Fax:0769-82586086 add: No. 59, Muyu Road, Shatou Community, Changan Town, Dongguan City, Yuanfu Industrial Zone ， 安 全 資 料 表 版權2021-01-10 PSM-800FSDM-A/SMH-800 2 二丙二醇甲基醚Methyl dipropylene glycol 34590-94-8 4% 碳黑Carbon black 1333-86-4 3.5 % 硫酸鋇BaSO4 13462-86-7 24 % 光敏劑及其它Photoinitiator and the others 5495-84-1 1.5 % 四、急救措施 不同暴露途徑之急救方法： 吸 入：1.施救前先做好自身的防護措施。 2.移走污染源或將患者移至新鮮空氣處。 3.若有病人呼吸停止，立即由受過訓的人施以人工呼吸，若心跳停止，施行心肺復甦術，當患者吸入和吞下 毒性物質時，別直接使用口對口人工呼吸，應使用單向給氣式之口袋型面罩和其他醫療器材來執行人工呼 吸。 4.保持患者安靜及維持正常體溫。6.儘速就醫治療。 皮膚接觸：儘快以緩和流動的水沖洗受污染區域至少20 分鐘，沖水前，脫掉污染的衣物、鞋子、皮飾品。 眼睛接觸：立即將眼皮撐開用緩和流動的水沖洗受污眼睛至少20 分鐘，並立即就醫。 食 入：1.若患者即將喪失意識，或已喪失意識或痙攣，不可餵食任何東西。 2.不可催吐，並給予240-300ml 的水。 3.如果自發性嘔吐，讓其漱口，並反覆給水。 最重要症狀及危害效應：－ 對急救人員之防護：－ 對醫師之提示：－ 五、滅火措施 適用滅火劑：化學乾粉、酒精泡沫、二氧化碳、噴水，大火：噴水、水霧、泡沫水霧。 滅火時可能遭遇之特殊危害： 1.其蒸氣及熱分解物易燃及有毒。 2.其蒸氣較空氣重，能傳播至遠處之火源處，發生回火。 3.蒸氣與大氣結合可能會發生爆炸。 4.當此物質在室內、室外或下水道有蒸氣爆炸危險。 特殊滅火程序： 1.在安全距離的地方滅火，保持在上風位置。 2.可用水冷卻容器，分散蒸氣沖洗外洩並稀釋外洩物，保護搶救人員。 3.用水噴灑露在火焰中的容器四週，使…

Text truncated - open the document above for the full version.

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. T…

Text truncated - open the document above for the full version.