2AL8S-0235CBTCIP Camera

The following contents are for quick installation instructions only. For detailed disclaimer and safety information, please scan the QR code below. Packing List Note: Contact your local dealer if the package is damaged or incomplete. * indicates different camera models. Each package contains only one camera model.The following example is based on the 4G-camera model.The package contents may vary with device model. Device Installation Learn More To view the complete materials, please scan the QR code with your phone. The illustrations are for reference only. The actual device may vary. Press 1. Press on both sides of the bracket and pull it outward horizontally. Facing upward 3. Position the bracket as shown in the diagram, align the bracket’s holes with the plastic rivets, and then insert self-tapping screws into the holes to secure the bracket. 2. Paste the drill template on the wall and use a 66-6.5mm drill bit to drill four 30 mm-depth holes. Knock the plastic rivets into the holes and ensure they are fully tightened. 4. Align the groove on the device with the bottom of the bracket, and then push the device horizontally until the bracket secures the device. Quick guide Screw components Waterproof components Power adapter Drill template Warning sticker *Wi-Fi-camera model 4G/Wi-Fi Camera Quick Guide Disclaimer and Safety Warnings Copyright StatementAvertissement de l’utilisation de la batterie About This Manual This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU. The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner. Battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or to a designated collection point. LVD/EMC Directive WEEE Directive–2012/19/EU Battery Regulation- (EU) 2023/1542 Regulatory Compliance No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from our company by our company and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse means. This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product. and descriptions in this manual may be different from the actual GUI and Despite our best efforts, technical or typographical errors may exist in this manual. Our company cannot be held responsible for any such errors and reserves the right to change the manual without prior notice. Users are fully responsible for the damages and losses that arise due to improper operation. Our company reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated. Safety Warnings The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property. Storage, Transportation, and Use Store or use the device in a proper environment that meets environmental requirements, including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc. Make sure the device is securely installed or placed on a flat surface to prevent falling. Unless otherwise specified, do not stack devices. Ensure good ventilation in the operating environment. Do not co ver the vents on the device. Allow adequate space for ventilation. Protect the device from liquid of any kind. Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply's output pow er exceeds the total maximum power of all the connected devices. Verify that the device is properly installed before connecting it to power. Do not remove the seal from the device body without consulting our company first. Do not attempt to service the product yourself. Contact a trained professional for maintenance. Always disconnect the device from power before attempting to move the device. Take proper waterproof measures in accordance with requirements before using the device . Install and use the device in strict accordance with your local electrical safety regulations. Use a UL certified power supply that meets LPS requirements if an adapter is used. Use the recommended cordset (power cord) in accordance with the specified ratings. Only use the power adapter supplied with your device. Use a mains socket outlet with a protective earthing (grounding) connection. Ground your device properly if the device is intended to be grounded. Power Requirements Lorsque utiliser la batterie, évitez: Température et pression d'air extrêmement élevées ou basses pendant l'utilisation, le stockage et le transport. Remplacement de la batterie. Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles mentionnées ici, peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz inflammables. Remplacer la batterie par un type incorrect. Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper la batterie. Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du fabricant de la batterie. FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired …

Text truncated - open the document above for the full version.

2026-02-05 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2AL8S-0235CBTC [ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Name: Feng Xu 2026-02-05 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2AL8S-0235CBTC ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Name: Feng Xu

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 FRN: 0033401605 Contact Name: Kenneth Young Telephone No: 313-395-3113 Email: [email protected] Signature: Signed by (Printed Name/Title): Kenneth Young This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD FRN: 0026550475 Grantee Code: 2AL8S FCC ID: 2AL8S-0235CBTC Contact Name: Feng Xu Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China Telephone No: 18106582562 Email: [email protected] Signature: Date: 2026-02-05 Signed by (Printed Name/Title): Feng Xu

Date: 2026-02-05 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (IP Camera / Uho-P2A-M3F4D-A / FCC ID: 2AL8S-0235CBTC) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagrams, Schematics, Operational Descriptions) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Signature: Name: Feng Xu Applicant: ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China

Date: 2026-02-05 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Eurofins Electrical Testing Service (Shenzhen) Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Feng Xu Applicant: ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD Address: No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China TEL: 18106582562

EFGX26010229-IE-01-External Photos 1 / 5 External Photos Model Name: Uho-P2A-M3F4D-A EFGX26010229-IE-01-External Photos 2 / 5 EFGX26010229-IE-01-External Photos 3 / 5 EFGX26010229-IE-01-External Photos 4 / 5 EFGX26010229-IE-01-External Photos 5 / 5

EFGX26010229-IE-01-Internal Photos 1 / 6 Internal Photos Model Name: Uho-P2A-M3F4D-A EFGX26010229-IE-01-Internal Photos 2 / 6 EFGX26010229-IE-01-Internal Photos 3 / 6 EFGX26010229-IE-01-Internal Photos 4 / 6 Antenna EFGX26010229-IE-01-Internal Photos 5 / 6 EFGX26010229-IE-01-Internal Photos 6 / 6

Radiofrequency radiation exposure evaluation: mobile devices RESULT : Pass Test Specification Test item : IP Camera Identification / Type No. : Uho-P2A-M3F4D-A FCC ID : 2AL8S-0235CBTC Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D04 ➢ FCC requirements FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. RF Exposure Evaluation Result RF exposure evaluation method is based on KDB 447498 D01, this calculation is based on the conducted power, maximum power and antenna gain with provides the minimum separation distance. The formula shown below is from OET Bulletin 65 Edition 97-01 Per KDB 447498 D01: S = PG/(4πR 2 ) S = Power Density (mW/m 2 ) P = RF output Power (mW) G = EUT Antenna gain (numeric) R = Separation distance between radiator and human body (cm) From the minimum separation distance, R=20cm Test mode Max. RF Output Power (dBm) Antenna Gain (dBi) Max EIRP (dBm) Max EIRP (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) Result 2.4G WLAN 8.77 4.59 13.36 21.677 0.0043 1 Pass “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

Gaoke Ant Co., Ltd. Room 705, No. 8, Jinsui Road, Tianhe District, Guangzhou City 第1页 共6页 Specification For Approval 客户名称： Customer 供 应 商： Supplier 客户料号： Customer P/N 产品名称： Production Name FPC Antenna 产品型号： Production Number GKZS-2.4-F0040-RF1.13I-80 Gaoke Ant Co., Ltd. 第3页 共6页 一、产品结构图纸（mm） 标记位置 更 改 内 容版本签名/日期 图样名称 表面处理 第三视角： 审 核 工 艺 标准化 批 准 产品型号 比例 图样编号 单位 mm 版本页次 材 料 重 量 设 计 宿迁可耐可特有限公司 1/1A0 混合 2.4G内置天线 GKZS-2.4-F0040-RF1.13I-80 0.5g GK-F0040-A3 手撕口 一代IPEX头 RF1.13线 灰色铁氟龙 8 0 ± 3 40±0.5 10±0.5 FPC 点透明胶 Gaoke Ant Co., Ltd. 第4页 共6页 三、天线技术参数 DesignSpecificationsTypical 天线形式(Antennaform) FPC Antenna 工作频率(workingFrequency)2400-2500MHz 增益（Gain）3.94dBi（均值）、4.59dBi（峰值）@2400-2500MHz 天线效率（Antennaefficiency）≥60% 电压驻波比（VSWR）≤1.5 极化方式(Ploriaztion)线极化 辐射方向(Radiationpattern)全向 馈电阻抗(impedance)50Ω 天线尺寸(Overaldimensions)40x10mm 重量(Weight)0.5g 工作温度(OperatinTemp)-40°C~80°C Gaoke Ant Co., Ltd. 第5页 共6页 3 、方向图（ 2D 及 3D 图） Gaoke Ant Co., Ltd. 第6页 共6页 4 、效率曲线图 5 、增益曲线图

Page 1 of 28 EUROFINS ELECTRICAL TESTING SERVICE (SHENZHEN) CO., LTD. RADIO TEST - REPORT FCC Compliance Test Report for Product name: IP Camera Model name: Uho-P2A-M3F4D-A FCC ID: 2AL8S-0235CBTC Test Report Number: EFGX26010229-IE-01-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Phone: +86-0755-829118671 Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8 Fax: +86-0755-82910749 Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 2 of 28 Content 1 General Information 3 1.1 Notes 3 1.2 Testing laboratory 4 1.3 Details of applicant 4 1.4 Details of manufacturer 4 1.5 Application details 5 1.6 Test item 5 1.7 Test standards 6 2 Technical test 7 2.1 Summary of test results 7 2.2 Test environment 7 2.3 Measurement uncertainty 7 2.4 Test mode 8 2.5 Test equipment utilized 9 2.6 Auxiliary equipment used during test 10 2.7 Test software information 10 2.8 Test setup 11 2.9 Test results 13 3 Technical Requirement 14 3.1 Conducted emission AC power port 14 3.2 Duty cycle 15 3.3 6dB bandwidth 16 3.4 99% Occupied Bandwidth 17 3.5 DTS fundamental emission output power 18 3.6 Power spectral density 21 3.7 Conducted Band Edge & Conducted Spurious Emissions 24 3.8 Spurious emissions & Restricted Band 25 4 Test Setup Photos 28 5 External Photos 28 6 Internal Photos 28 7 Appendix 28 Test Report No.: EFGX26010229-IE-01-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 3 of 28 1 General Information 1.1 Notes The results of this test report relate exclusively to the item tested as specified in chapter “Description of test item” and are not transferable to any other test items. Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. is not responsible for any generalisations and conclusions drawn from this report. Any modification of the test item can lead to invalidity of test results and this test report may therefore be not applicable to the modified test item. The test report may only be reproduced or published in full. Reproducing or publishing extracts of the report requires the prior written approval of the Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. This document is subject to the General Terms and Conditions and the Testing and Certification System of Eurofins Electrical Testing Service (Shenzhen) Co., Ltd., available on request or accessible at www.eurofins.com. Operator 2026-02-04 Bruce Zheng / Project Engineer Date Eurofins-Lab. Name / Title Signature Technical responsibility for area of testing: 2026-02-04 Albert Xu / Lab Manager Date Eurofins-Lab. Name / Title Signature Test Report No.: EFGX26010229-IE-01-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 4 of 28 1.2 Testing laboratory Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Telephone : +86-755-82911867 Fax : +86-755-82910749 The Laboratory has passed the Accreditation by the American Association for Laboratory Accrediation (A2LA). The Accreditation number is 5376.01 The Laboratory has been listed by industry Canada to perform electromagnetic emission measurements, The CAB identifier is CN0088 1.3 Details of applicant Name : ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD Address : No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China Telephone : ./. Fax : ./. 1.4 Details of manufacturer Name : ZHEJIANG UNIVIEW TECHNOLOGIES CO LTD Address : No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, Zhejiang Province, China Telephone : ./. Fax : ./. Test Report No.: EFGX26010229-IE-01-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 5 of 28 1.5 Application details Date of receipt of application : 2026-01-13 Date of receipt of test item : 2026-01-13 Date of test : 2026-01-13 to 2026-02-04 Date of issue : 2026-02-04 1.6 Test item Product type : IP Camera Test Model : Uho-P2A-M3F4D-A Sample ID : 260113-05-002 Brand : ./. Serial number : ./. Ratings : DC 12V, 1A Test voltage : 120V RadioTechnical data Radio Tech. : WLAN 2.4G Modulation : 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Antenna type : FPC antenna Maximum antenna gain : 4.59 dBi Additional information : ./. The above sample(s) and sample information was/were submitted and identified on behalf of the applicant. Eurofins assures objectivity and impartiality of the test, and fulfills the obligation of confidentiality for applicant’s commercial infor- mation and technical documents. Test Report No.: EFGX26010229-IE-01-E01 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Room 20 of 2/F., 1/F., Building 2, Spring Block & Room 102, Building 8, Autumn Block, Meishenghuigu Innovation Park, No.83, Dabao Road, Bao’an District, Shenzhen, Guangdong, China Page 6 of 28 1.7 Test standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators Test Method 1: ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emis- sions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. 2: ANSI C63.10-2020 + COR.1-2023, American National Standard for Testing Unlicensed Wireless Devices. 3: KDB558074 D01 …

Text truncated - open the document above for the full version.

EFGX26010229-IE-01-Setup Photos 1 / 2 EFGX26010229-IE-01-Setup Photos 2 / 2