FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. INTERNATIONAL DEVELOPMENT COMPANY/
  3. 2AP35-LV0BAA01H

2AP35-LV0BAA01HLOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR

INTERNATIONAL DEVELOPMENT COMPANY
LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR - FCC ID 2AP35-LV0BAA01H - INTERNATIONAL DEVELOPMENT COMPANY
Click to zoom

Application Details

Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Date of Grant
Sep 21, 2022
Application Purpose
Original Equipment
Date of Application
Sep 21, 2022
Equipment Note
LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR
Frequency Range
2402.00000000 - 2480.00000000
Company
INTERNATIONAL DEVELOPMENT COMPANY
Country
United States

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗
↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗
↗

RF Exposure Info

↗

Test Report

↗
↗

Test Setup Photos

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

ITEM: LV0BAA01H-08 For additional help and information regarding installation, contact Customer Service at 1-877-723-0723, 8am-5pm,CST Monday – Friday [email protected] and Westinghouse are trademarks of Westinghouse Electric Corporation. Used under license by Sky Rich Star Limited. All Rights Reserved. E TROUBLESHOOTING OPERATING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The light does not turn on when needed. 1. The wire of the connector doesn’t contact pins. 2. The wire and the transformer aren’t in contact. 3. No power to the transformer. 1. Check the wiring of connector. Make sure brass contact pins pierce the plastic wire insulation and are touching the copper wires inside. 2. Check the connection between the primary wire and the transformer. 3. Check the power to the transformer. WARNING: 1. Fixture shall be connected to an extra low voltage transformer approved for use with landscape lighting systems. 2. This xture is to be connected to a secondary wiring of the following type: SPT-3 suitable for outdoor use; or approved landscape lighting cable. 3. If you have any doubts about how to install this lighting xture, or if the xture fails to operate completely, please contact a licensed electrical contractor. PACKAGE CONTENTS INSTRUCTIONS MOUNTING 1. Put notched pipe thread (D ) cover the wire cord. Connect the charging pole (B) and ground stake (C) together with notched pipe thread (D). (gure 1) 2. Align the assembly (B,C&D) with the charging port of the light xture (A) and tighten it clockwise. (gure 2) 3. Push the assembled xture into the ground. (gure 3) NOTE: DO NOT use a hammer. NEVER push the xture into the ground by the head. Instead, hold the pole (B) and push the xture into the ground. 4. TURN OFF POWER. Connect xture’s 12V cable to transformer landscape wire run using supplied wire connector. Make wire connections using supplied. Quick connect following instructions, or using other approved wiring connection method (not supplied.) A: Light FixtureD: Notched Pipe ThreadC: Ground StakeB: Charging Pole gure 7 gure 8 1. Unscrew the top cover from the connector (E) and keep it for later use. (gure5) Bottom base Top cover E E Top cover Bottom base Transformer wire Wire Brass pins gure 5gure 6gure 7 NOTE: a. The brass pins must be aligned to the center of wires and tightened. (gure 7) b. This xture is a safety low-voltage (AC12V), and the brass pins can be exposed but pose no danger of electric shock. 3. Assembly is complete. Refer to the transformer’s instructions for how to install additional lighting (sold separately) to the same transformer. 2. Insert wire from low-voltage transformer (sold separately) into the bottom base of connector (E) and then re-tighten the top cover removed in step 1 until the contact pins completely pierce the plastic shield of the wire. (gure 6) QUICK CONNECT INSTRUCTIONS RECHARGEABLE BATTERY This product includes a 3.7V 2000mAh lithium (18650) rechargeable battery and cannot be replaced. WARNING: Do not dispose of lithium batteries in municipal waste stream or by re as batteries may explode. Do not open, short circuit, or destroy batteries. Dispose of batteries in accordance with Local, State, and Federal regulations. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium, nickel metal hydride or lithium ion) batteries . TRADEMARK ATTRIBUTION FOOTNOTE NOTE: The Bluetooth® brand elements may not be used in a fashion or manner that could impair or otherwise damage the goodwill associated with the Bluetooth® brand or the Fellow Adopters (Sky Rich Star Limited). The Bluetooth® brand elements shall therefore not be used in connection with products and services that do not enable any Bluetooth® wireless functionality or in connection with unlawful, obscene, pornographic, excessively violent, hazardous,or otherwise poor-taste activities. Whenever the Bluetooth Trademarks are used in a particular piece , they must be attributed with an appropriate trademark footnote. The recommended attribution footnote is as follows: “The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. And any use of such marks by Sky Rich Star Limited is under license. Other trademarks and trade names are those of their respective owners.” FCC WARNING Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency enerqy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and…

Text truncated - open the document above for the full version.

Cover Letter(s)

September 5, 2022 Declaration Of Identity To Whom It May Concern: With regards to the application for Model: LV0BA*##*-##, We declare the hardware circuit and software are identical to the basic model : LV0BAA01H-08. Except the following(s): Model Names, different packaging and different color. Where "#" is used to denote numbers 1-9 or blank for different packaging and different color; Where “*” is used to denote letters A-Z or blank for different packaging and different color. The others are the same. Yours Sincerely, INTERNATIONAL DEVELOPMENT COMPANY Signature:

Cover Letter(s)

Date: 5 September 2022 INTERNATIONAL DEVELOPMENT COMPANY To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The INTERNATIONAL DEVELOPMENT COMPANY, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the INTERNATIONAL DEVELOPMENT COMPANY solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AP35-LV0BAA01H including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the INTERNATIONAL DEVELOPMENT COMPANY. The INTERNATIONAL DEVELOPMENT COMPANY also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, _______ zhiquan li

Cover Letter(s)

Date: 5 September 2022 INTERNATIONAL DEVELOPMENT COMPANY To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: INTERNATIONAL DEVELOPMENT COMPANY FCC ID: 2AP35-LV0BAA01H FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. INTERNATIONAL DEVELOPMENT COMPANY requests that the following documents regarding this submission for FCC ID: 2AP35-LV0BAA01H be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days): External photos External photos.pdf Test setup photos test photo.pdf Internal photos Internal photos.pdf User manual User manual.pdf Those documents contain detailed system and equipment description and related information about the product which INTERNATIONAL DEVELOPMENT COMPANY considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, INTERNATIONAL DEVELOPMENT COMPANY considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, zhiquan li

External Photos

Report No.: BL-SZ2240624-AW 1 / 3 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2240624-AW 2 / 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: BL-SZ2240624-AW 3 / 3 TOP VIEW OF EUT BOTTOM VIEW OF EUT

ID Label/Location Info

FCC Label and Location FCC Label: Label location: Note:The label is permanently affixed and resistant to corrosion and the font is readily legible.

Internal Photos

Report No.: BL-SZ2240624-AI 1 / 3 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Report No.: BL-SZ2240624-AI 2 / 3 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW PCB Antenna RF Chip Report No.: BL-SZ2240624-AI 3 / 3 BATTERY (FRONT) BATTERY (REAR)

Internal Photos

Report No.: BL-SZ2290343-AA 1 / 1 EUT PHOTO Antenna

RF Exposure Info

Report No.: BL-SZ2240624-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-08) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: INTERNATIONAL DEVELOPMENT COMPANY Address: 899 Henrietta Creek Road, Roanoke, Texas 76262 USA. Equipment Type: LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR Model Name: LV0BAA01H-08 (refer section 2.4) Brand Name: Westinghouse FCC ID: 2AP35-LV0BAA01H Test Standard: 47 CFR Part 2.1091 (refer section 3.1) Test Date May 09, 2022 - Aug. 01, 2022 Date of Issue: Sep. 19, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie zhu Checked by: Xu Rui Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2240624-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-08) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Sep. 05, 2022 Initial Issue Rev. 02 Sep. 19, 2022 1. Updated antenna gain and EIRP in section 5.1. 2. Updated EIRP Range and ERP Range section 5.2. TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 5 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Turn-up power ................................................................................................................ 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion ...................................................................................................................... 9 Report No.: BL-SZ2240624-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-08) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2240624-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-08) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant INTERNATIONAL DEVELOPMENT COMPANY Address 899 Henrietta Creek Road, Roanoke, Texas 76262 USA. 2.2 Manufacturer Information Manufacturer Zhongshan Quanxin Lighting & Electrical Corp., Ltd. Address Zone A, Building 1, No.1, Hongji Road, West District, Zhongshan City, Guangdong Province 2.3 Factory Information Factory Zhongshan Quanxin Lighting & Electrical Corp., Ltd. Address Zone A, Building 1, No.1, Hongji Road, West District, Zhongshan City, Guangdong Province 2.4 General Description for Equipment under Test (EUT) EUT Name LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR Model Name Under Test LV0BAA01H-08 Series Model Name LV0BA*##*-##(Where "#" is used to denote numbers or blank for commercial purpose; Where “*” is used to denote letters or blank for commercial purpose) Description of Model name differentiation All models are same with electrical parameters and internal circuit struc…

Text truncated - open the document above for the full version.

Test Report

Report No.: BL- SZ2240624-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 74 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: INTERNATIONAL DEVELOPMENT COMPANY Address: 899 Henrietta Creek Road, Roanoke, Texas 76262 USA. Equipment Type: LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR Model Name: LV0BAA01H-08 (refer section 2.4) Brand Name: Westinghouse FCC ID: 2AP35-LV0BAA01H Test Standard: 47 CFR Part 15 Subpart C (refer section 3.1) Test Date May 09, 2022 - Aug. 01, 2022 Date of Issue: Sep. 19, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2240624-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 74 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 05, 2022 Initial Issue Rev. 02 Sep. 19, 2022 Updated antenna gain in section 2.5. TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 2.6 Additional Instructions .................................................................................................... 8 3 SUMMARY OF TEST RESULTS ................................................................................................. 9 3.1 Test Standards ............................................................................................................... 9 3.2 Test Verdict .................................................................................................................... 9 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 10 4.1 Test Environments ....................................................................................................... 10 4.2 Test Equipment List ...................................................................................................... 10 4.3 Test Software List ......................................................................................................... 10 4.4 Measurement Uncertainty ............................................................................................ 11 4.5 Description of Test Setup ............................................................................................. 11 4.6 Measurement Results Explanation Example ................................................................ 14 5 TEST ITEMS .............................................................................................................................. 15 5.1 Antenna Requirements ................................................................................................. 15 5.2 Frequency Hopping Systems ....................................................................................... 16 5.3 Number of Hopping Frequencies ................................................................................. 18 Report No.: BL-SZ2240624-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 74 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.4 Peak Output Power ...................................................................................................... 19 5.5 Occupied Bandwidth .................................................................................................... 20 5.6 Carrier Frequency Separation ...................................................................................... 21 5.7 Time of Occupancy (Dwell time) .................................................................................. 22 5.8 Conducted Spurious Emission & Authorized-band band-edge .................................... 24 5.9 Conducted Emission .................................................................................................... 25 5.10 Radiated Spurious Emission ........................................................................................ 26 5.11 Band Edge (Restricted-band band-edge) ..................................................................... 28 ANNEX A TEST RESULT ............................................................................................................. 29 A.1 Number of Hopping Frequency .................................................................................... 29 A.2 Peak Output Power ...........................................................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: BL-SZ2290343-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Zhongshan Quanxin Lighting & Electrical Corp., Ltd Address: Zone A, Building 1, No.1, Hongji Road, West District, Zhongshan City, Guangdong Province Equipment Type: LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR Model Name: LV0BAA01H-08 Brand Name: N/A Test Standard: ANSI/IEEE Std 149-1979 Test Date: Sep. 09, 2022 Date of Issue: Sep. 16, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Tolan Tu Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2290343-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Sep. 16, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 12 ANNEX D EUT PHOTO .............................................................................................................. 12 Report No.: BL-SZ2290343-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2290343-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Zhongshan Quanxin Lighting & Electrical Corp., Ltd Address Zone A, Building 1, No.1, Hongji Road, West District, Zhongshan City, Guangdong Province 2.2 Manufacturer Information Manufacturer Zhongshan Quanxin Lighting & Electrical Corp., Ltd Address Zone A, Building 1, No.1, Hongji Road, West District, Zhongshan City, Guangdong Province 2.3 General Description for Equipment under Test (EUT) EUT Name LOW VOLTAGE BLUETOOTH SPEAKER PATH ACCESSOR Model Name Under Test LV0BAA01H-08 Antenna Type PCB Antenna Dimensions 14.1*5.2 mm 2.4 Ancillary Equipment Note: Not applicable. 2.5 Technical Information Test Fre…

Text truncated - open the document above for the full version.

Test Setup Photos

Report No.: BL-SZ2240624-AR 1 / 8 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz (AC 12V Power Supply) Close-up (AC 12V Power Supply) Report No.: BL-SZ2240624-AR 2 / 8 30MHz-1GHz (AC 12V Power Supply) Close-up (AC 12V Power Supply) Report No.: BL-SZ2240624-AR 3 / 8 Below 30MHz (Adapter Power Supply) Close-up (Adapter Power Supply) Report No.: BL-SZ2240624-AR 4 / 8 30MHz-1GHz (Adapter Power Supply) Close-up (Adapter Power Supply) Report No.: BL-SZ2240624-AR 5 / 8 Above 1GHz Close-up Report No.: BL-SZ2240624-AR 6 / 8 2 Conducted Test Photo Conducted Test-BT 3 Conducted Emission AC 12V Power Supply Report No.: BL-SZ2240624-AR 7 / 8 AC 12V Power Supply Adapter Power Supply Report No.: BL-SZ2240624-AR 8 / 8 Adapter Power Supply

Test Setup Photos

Report No.: BL-SZ2290343-AO 1 / 1 TEST SETUP PHOTOS

Contact Information

Applicant

zhiquan li(Manager)
[email protected]+86-0760-88868888Fax: +86-0760-88868888

Test Firm

Shenzhen BALUN Technology Co., Ltd.Hanson Lin
[email protected]86-755-66833830

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.40 GHz - 2.48 GHz1.76 mW
Confidentiality
Long Term
Grant Notes
Output Power listed is conducted.

Other Applications from INTERNATIONAL DEVELOPMENT COMPANY

Solar LED Light - FCC ID 2AP35-SR07PM04H41 - INTERNATIONAL DEVELOPMENT COMPANY
2AP35-SR07PM04H41

Solar LED Light

Jan 04, 2023

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
Remote Controller - FCC ID 2AP35-LV30RM01A - INTERNATIONAL DEVELOPMENT COMPANY
2AP35-LV30RM01A

Remote Controller

Dec 28, 2022

Equipment Class

DTS - Digital Transmission System
Solar LED Light - FCC ID 2AP35-SR32SL02H-08 - INTERNATIONAL DEVELOPMENT COMPANY
2AP35-SR32SL02H-08

Solar LED Light

Dec 07, 2022

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
Solar LED Light - FCC ID 2AP35-SR58FA01H-08 - INTERNATIONAL DEVELOPMENT COMPANY
2AP35-SR58FA01H-08

Solar LED Light

Dec 07, 2022

Equipment Class

DXX - Part 15 Low Power Communication Device Transmitter
LED Garage Light - FCC ID 2AP35-D303353 - INTERNATIONAL DEVELOPMENT COMPANY
2AP35-D303353

LED Garage Light

Nov 06, 2022

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter