2APD3TS15smart watch

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -Reorient or relocate the receiving antenna.  -Increase the separation between the equipment and receiver.  -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Page: 3 of 12 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 4 of 12 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 5 of 12 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 6 of 12 Photo 7 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2APD3TS15 TB-RF -07 4-1.0

Page: 1 of 12 Appendix IFCC ID Label Size for the label: 10mm X 10mm FCCID: 2APD3TS15 Model: TS15 FCC ID:2APD3TS15 TB -RF-074-1.0 Page: 2 of 12 Appendix II ID Label Location ID LOCATION FCC ID:2APD3TS15 TB-RF -07 4-1.0

Page: 7 of 12 Appendix IV EUT Internal Photographs Photo 8 Internal of PCB Photo 9 Appearance of PCB Antenna FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 8 of 12 Photo 10 Appearance of PCB Photo 11 Appearance of PCB FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 9 of 12 Photo 12 Appearance of PCB Photo 13 Appearance of Battery FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 10 of 12 Photo 14 Appearance of Battery FCC ID:2APD3TS15 TB-RF -07 4-1.0

SHEN ZHEN TOMSTAR TECHNOLOGY CO., LTD Declaration concerning Antenna Specification It is hereby declared that the product Model No.: TS15, TS15+, TS16 FCC ID: 2APD3TS15 ful fills the requirement in FCC test relating to the antenna type. The dev ice specified above confirms to the FCC recommendations for Internal antenna type(s) described below: Model No. of antenna: N/A Type of antenna: Internal Antenna Gain of the antenna: 0 dBi Frequency range: 2402-2480 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: SHEN ZHEN TOMSTAR TECHNOLOGY CO., LTD Address: Room2110-2116, huafeng international building, No.4018 BaoAn Blvd, Shenzhen, China. City: Shenzhen ZIP / Postal code: Country: China Pla ce: Jun Li/ Manager Date: 2020-09-14 Si gnature: ver sion01

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE175423 Page: 1 of 3 RF Exposure Evaluation FCC ID: 2APD3TS15 1. Client Information Applicant : SHEN ZHEN TOMSTAR TECHNOLOGY CO., LTD Address : Room2110-2116, huafeng international building, No.4018 BaoAn Blvd, Shenzhen, China. Manufacturer : Tomstar lndustrial Limited Address : Room 2110-2116, Huafeng International Commercial Building, Xixiang, BaoAn district, Shenzhen, China 2. General Description of EUT EUT Name : smart watch Model(s) No. : TS15, TS15+, TS16 Model Different : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance and shape. Sample ID : TBBJ-20200724-16-1# & TBBJ-20200724-16-2# Product Description : Operation Frequency: Bluetooth 4.2(BLE): 2402MHz~2480MHz Number of Channel: Bluetooth 4.2(BLE): 40 channels RF Output Power: 0.885 dBm (Max) Antenna Gain: 0 dB iinternal Antenna Modulation Type: GFSK Bit Rate of Transmitter: 1Mbps Power Rating : Input:DC 5V DC 3.7V by 180mAh Li-ion battery Software Version : N/A Hardware Version : M10014.01 Connecting I/O Port(S) : Please refer to the User's Manual Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. TB -RF -07 4-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 Report No.: TB-MPE175423 Page: 2 of 3 SAR Test Exclusion Calculations 1.FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance ≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR TB -RF -07 4- 1.0 Report No.: TB-MPE175423 Page: 3 of 3 2.Calculation: Test separation: 5mm BLE Mode (1Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 0.885 0±1 1 1.259 0.3913.0 2.442 0.227 0±1 1 1.259 0.3943.0 2.480 -0.288 0±1 1 1.259 0.3973.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT----- TB -RF -07 4- 1.0

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC175422 Page: 1 of 41 FCC Radio Test Report FCC ID: 2APD3TS15 Original Grant Report No. : TB-FCC175422 Applicant : SHEN ZHEN TOMSTAR TECHNOLOGY CO., LTD Equipment Under Test (EUT) EUT Name : smart watch Model No. : TS15 Series Model No. : TS15+, TS16 Brand Name : N/A Sample ID : TBBJ-20200724-16-1# & TBBJ-20200724-16-2# Receipt Date : 2020-09-03 Test Date : 2020-09-03 to 2020-09-11 Issue Date : 2020-09-14 Standards : FCC Part 15, Subpart C 15.247 Test Method : ANSI C63.10: 2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, Test/Witness Engineer : Jack Deng Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. TB -RF-07 4- 1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Te l : +86 75526509301 Fax: +86 75526509195 Report No.: TB-FCC175422 Page: 2 of 41 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT .................................................................................................................. 11 5. CONDUCTED EMISSION TEST ........................................................................................... 12 5.1 Test Standard and Limit .................................................................................................... 12 5.2 Test Setup ........................................................................................................................... 12 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 13 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data ............................................................................................................................. 13 6. RADIATED EMISSION TEST ................................................................................................ 14 6.1 Test Standard and Limit .................................................................................................... 14 6.2 Test Setup ........................................................................................................................... 15 6.3 Test Procedure ................................................................................................................... 16 6.4 Deviation From Test Standard ......................................................................................... 17 6.5 EUT Operating Condition ................................................................................................. 17 6.6 Test Data ............................................................................................................................. 17 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 18 7.1 Test Standard and Limit .................................................................................................... 18 7.2 Test Setup ........................................................................................................................... 18 7.3 Test Procedure ................................................................................................................... 18 7.4 Deviation From Test Standard ......................................................................................... 19 7.5 EUT Operating Condition ................................................................................................. 19 7.6 Test Data ............................................................................................................................. 19 8. BANDWIDTH TEST ................................................................................................................. 20 8.1 Test Standard and Limit .................................................................................................... 20 8.2 Test Setup ...................................................................................................................…

Text truncated - open the document above for the full version.

Page: 11 of 12 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Below 1 GHz) FCC ID:2APD3TS15 TB-RF -07 4-1.0 Page: 12 of 12 Photo of Setup for Conducted Emission -----END OF REPORT----- FCC ID:2APD3TS15 TB-RF -07 4-1.0